Fixation Rates Research Articles

Sulfur oxidation and reduction are coupled to nitrogen fixation in the roots of the salt marsh foundation plant Spartina alterniflora

Heterotrophic activity, primarily driven by sulfate-reducing prokaryotes, has traditionally been linked to nitrogen fixation in the root zone of coastal marine plants, leaving the role of chemolithoautotrophy in this process unexplored. Here, we show that sulfur oxidation coupled to nitrogen fixation is a previously overlooked process providing nitrogen to coastal marine macrophytes. In this study, we recovered 239 metagenome-assembled genomes from a salt marsh dominated by the foundation plant Spartina alterniflora, including diazotrophic sulfate-reducing and sulfur-oxidizing bacteria. Abundant sulfur-oxidizing bacteria encode and highly express genes for carbon fixation (RuBisCO), nitrogen fixation (nifHDK) and sulfur oxidation (oxidative-dsrAB), especially in roots stressed by sulfidic and reduced sediment conditions. Stressed roots exhibited the highest rates of nitrogen fixation and expression level of sulfur oxidation and sulfate reduction genes. Close relatives of marine symbionts from the Candidatus Thiodiazotropha genus contributed ~30% and ~20% of all sulfur-oxidizing dsrA and nitrogen-fixing nifK transcripts in stressed roots, respectively. Based on these findings, we propose that the symbiosis between S. alterniflora and sulfur-oxidizing bacteria is key to ecosystem functioning of coastal salt marshes.

Short-term fate of nitrogen fixed by moss-cyanobacteria associations under different rainfall regimes

Nitrogen (N) fixation by moss-cyanobacteria associations has been recognized as an important N input pathway in many ecosystems from arctic tundra to tropical forests. However, the transfer of fixed N2 from mosses to the soil as well as the effects of rainfall frequency and volume on this N transfer has hardly been studied – even though mosses can leach nutrients upon rewetting. In this study, we investigated the transfer of fixed N2 by moss-cyanobacteria associations in one month under four watering regimes with a combination of high and low volume and frequency. For this, we used two morphologically similar moss species collected from ecosystems with different climate and N availability (subarctic - Hylocomium splendens; and tropical - Thuidium delicatulum). Acetylene reduction assays were conducted as a measure of N2 fixation rates in mosses, and 15N-N2 tracing was used to follow the fixed N2 from moss to the underlying substrate. Nitrogen fixation rates were higher in T. delicatulum than in H. splendens, but rainfall volume and frequency did not show strong effects on N2 fixation rates. Nonetheless, the extent of N leached from mosses was more sensitive to an increase in rainfall volume than to an increase in frequency, and more N was lost from T. delicatulum under high volume precipitation than from H. splendens. Both total nitrogen and 15N enrichment results demonstrate that the fixed N2 was mostly stored in moss tissues with less than 1 % leached to the substrate. Our results show that both moss species retain almost all fixed N2 within their tissues under small rainfall disturbances within one month, while increased N availability under higher precipitation volume renders some moss species an important N source for the soil.

Analysis of unconfined compressive strength and environmental impact of MICP-treated lead-zinc tailings sand instead of sand as embankment material

Tailings can be used as embankment materials instead of sand. However, they contain large amounts of heavy metal pollutants, which can lead to groundwater pollution. In this study, (lead-zinc) Pb-Zn tailings with five particle sizes and Sporosarcina pasteurii were used as test materials. Combined with the unconfined compressive strength (UCS) and leaching of heavy metal pollutants from Pb-Zn tailings, the feasibility of applying microbial induced carbonate precipitation (MICP)-treated Pb-Zn tailings to embankment materials was analysed from the perspective of strength and environmental performance. The results showed that the UCS and carbonate content of the specimens made of Pb-Zn tailings treated using MICP decreased with a decrease in the number of Pb-Zn tailing particles. The pH value of the leaching solution after MICP treatment of Pb-Zn tailings sand was stable at 7.83–8.03, and the fixation rate of metal ions was 90.28 %–100 %. FTIR, X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy tests showed that after the Pb-Zn tailings with particle sizes less than 100 mesh were treated using MICP, the number of carbonate crystals, crystal uniformity, and crystal overlap on the surface of the sample were considerably higher than those of the tailings with particle sizes greater than 250 mesh. The compressive strength and environmental performance of Pb-Zn tailings with particle sizes less than 100 mesh treated using MICP are good, and they are more suitable for embankment materials.

Effect of excess CO2 on semi-continuous microalgae systems: Carbon biofixation

Microalgae-based CO2 fixation is a promising solution for achieving carbon neutrality. However, the low rate of carbon fixation is a significant issue due to gas transfer. A closed cultivation system was employed to overcome this challenge, incorporating headspace micro-positive pressure and elevated total CO2 (TCO2) levels to minimize CO2 loss and improve CO2 mass transfer. Microalgae could thrive and maintain a higher level of system pH within the TCO2 range of 0.12–0.49 mol CO2/L absorbent, and high TCO2 levels over 0.36 mol CO2/L absorbent were the optimal range. The semi-continuous microalgae system removed up to 8.72 ± 0.85 g CO2/L/day. Simultaneously, it exhibited phosphate and nitrate removal rates of 50.95 ± 10.71 and 182.14 ± 30.71 mg/L/day, respectively. The study found that 80% of the removed carbon was fixed as organic biomass. An increased level of TCO2 resulted in the accumulation of more lipids within the cells. Moreover, microalgae released carbon fixation products into the extracellular environment, and the dissolved organic carbon fixation rate reached as high as 14.58 ± 1.89 mmol/L/day. These findings suggest that microalgae use multiple pathways for carbon fixation, including biomass organic carbon accumulation, extracellular organic carbon secretion, and inorganic carbon precipitation. Improving carbon fixation rates may benefit the industrial application of microalgae technology, which aims to mitigate carbon emissions.

Numerical study of structural optimization for improving gas-liquid flow and microalgae carbon fixation rate in air-lift photobioreactors

In this paper, the gas-liquid flow pattern and CO2 dissolution transport process of microalgae solution in an air-lift photobioreactor (PBR) are investigated by numerical simulations. In order to promote the gas-liquid mass transfer efficiency to enhance the carbon fixation, we propose different optimization schemes for the structure. Firstly, a two-phase flow model and a mass transfer model are employed to investigate the fluid flow characteristics. The flow state is evaluated by velocity in light direction, turbulent kinetic energy (TKE), gas hold-up and CO2 mass transfer coefficient. The results show that the gas flow rate of 0.2 V/V/min is the optimum value for the inlet. Secondly, CO2 mass transfer and carbon fixation rates are analyzed for different inlet CO2 volume fractions. With the increase of CO2 volume fraction, the carbon fixation rate first increases and then decreases, the highest fixation rate reaching 2.21 × 10−4 mol m−3 s−1 at 6 %. Finally, based on numerical simulations, three optimized structures with different spacing of baffles are proposed and evaluated the performance in comparison with the original. The results show that the gas distribution and CO2 mass transfer are significantly improved, with the one-sided baffle structure is the best. In summary, this study provides a new and useful reference to evaluate the gas-liquid mixing and improve the microalgae carbon fixation rate.

Effect of hybrid ratio on shape memory properties of graphene oxide‐carbon/glass fiber composites prepared based on vacuum infiltration hot‐press forming experimental system

AbstractShape memory composites now have a wide range of applications in aerospace, medical devices, and smart structures. Seven graphene‐carbon oxide/glass fiber (GO‐CF/GF) hybrid reinforced shape memory composites were prepared using vacuum infiltration hot pressing system (VIHPS) and the shape memory properties of the materials were investigated in 100°C test. By comparing and analyzing the microstructure and shape memory properties of composites containing different volume fractions of GFs, the mechanism of the influence of different hybrid contents of GFs on the organizational properties and shape memory properties was investigated. The results show that when the reinforcement of the composites were all carbon fibers, the composites had the largest elasticity modulus, harder material and the fixation rate of 77.15%, the recovery rate of 95.17%, the porosity of 0.80% and the shape recovery force of 7.98 N. When the reinforcement of the composites were glass fibers, the composites had the smallest elasticity modulus, softer material and the fixation rate of 94.89%, the recovery rate of 77.21%, the porosity of 13.56% and the recovery force of 2.28 N. The results of this test can lay a foundation for subsequent research on fibers with different mixing ratios.Highlights The GO‐CF/GF/EP prepared by VIHPS has excellent shape memory properties. Fiber hybrid ratio affects the composite's porosity and its properties. Fiber hybrid ratio affects the composite's shape fixation, recovery, and memory force. The shape fixation of G6 decreases the lowest with test cycles. Carbon fiber content changes the zero‐stress plane of GO‐CF/GF/EP.

Short-term nitrogen addition reduces soil microbial nitrogen fixation rate in subtropical Pinus taiwanensis and Castanopsis faberi forests

Biological nitrogen (N) fixation is an important source of N in terrestrial ecosystems, but the response of soil microbial N fixation rate to N deposition in different forest ecosystems still remains uncertain. We conducted a field N addition experiment to simulate atmosphere N deposition in subtropical Pinus taiwanensis and Castanopsis faberi forests. We set up three levels of nitrogen addition using urea as the N source: 0 (control), 40 (low N), and 80 g N·hm-2·a-1(high N) to examine the chemical properties, microbial biomass C, enzyme activities, and nifH gene copies of top soils (0-10 cm). We also measured the microbial N fixation rate using the 15N labeling method. Results showed that N addition significantly reduced the soil microbial N fixation rate in the P. taiwanensis and C. faberi forests by 29%-33% and 10%-18%, respectively. Nitrogen addition significantly reduced N-acquiring enzyme (i.e., β-1, 4-N-acetylglucosaminidase) activity and nifH gene copies in both forest soils. There was a significant positive correlation between the microbial N fixation rate and soil dissolved organic C content in the P. taiwanensis forest, but a significant negative relationship between the rate of soil microbial nitrogen fixation and NH4+-N content in the C. faberi forest. Overall, soil microbial N fixation function in the P. taiwanensis forest was more sensitive to N addition than that in the C. faberi forest, and the factors affecting microbial N fixation varied between the two forest soils. The study could provide insights into the effects of N addition on biological N fixation in forest ecosystems, and a theoretical basis for forest management.

Organic amendments increased Chinese milk vetch symbiotic nitrogen fixation by enriching Mesorhizobium in rhizosphere.

Symbiotic nitrogen fixation of Chinese milk vetch (Astragalus sinicus L.) can fix nitrogen from the atmosphere and serve as an organic nitrogen source in agricultural ecosystems. Exogenous organic material application is a common practice of affecting symbiotic nitrogen fixation; however, the results of the regulation activities remain under discussion. Studies on the impact of organic amendments on symbiotic nitrogen fixation have focused on dissolved organic carbon content changes, whereas the impact on dissolved organic carbon composition and the underlying mechanism remain unclear. In situ pot experiments were carried out using soils from a 40-year-old field experiment platform to investigate symbiotic nitrogen fixation rate trends, dissolved organic carbon concentration and component, and diazotroph community structure in roots and in rhizosphere soils following long-term application of different exogenous organic substrates, i.e., green manure, green manure and pig manure, and green manure and rice straw. Remarkable increases in rate were observed in and when compared with that in green manure treatment, with the greatest enhancement observed in the treatment. Moreover, organic amendments, particularly pig manure application, altered diazotroph community composition in rhizosphere soils, therefore increasing the abundance of the host-specific genus Mesorhizobium. Furthermore, organic amendments influence the diazotroph communities through two primary mechanisms. Firstly, the components of dissolved organic carbon promote an increase in available iron, facilitated by the presence of humus substrates. Secondly, the elevated content of dissolved organic carbon and available iron expands the niche breadth of Mesorhizobium within the rhizosphere. Consequently, these alterations result in a modified diazotroph community within the rhizosphere, which in turn influences Mesorhizobium nodulation in the root and symbiotic nitrogen fixation rate. The results of the present study enhance our understanding of the impact of organic amendments on symbiotic nitrogen fixation and the underlying mechanism, highlighting the key role of dissolved organic carbon composition on diazotroph community composition in the rhizosphere.

Clean dyeing of cotton fabrics by cross-linking reactive dyes with fiber macromolecular chains

Increasing dye utilization, shortening the process and reducing the discharge of colored wastewater are the keys to clean dyeing and finishing of fabrics. In this study, we report a clean dyeing process. The process improved the dye utilization and achieved wrinkle-finishing and dyeing in the same bath by enhancing cross-linking of dyes with fiber macromolecular chains. It was observed by SEM that the cross-section of the dyed fibers showed round or oval shape, and the mid-cavities were reduced or even disappeared. The swelling rate of the fibers and cellulase degradation experiments showed that the dyes formed stable cross-linking structures with the macromolecular chains. Furthermore, differences in the structure of reactive dyes affected the optimal reaction conditions between the dyes and the fibers. Compared to conventional processes, the K/S, color fixation rate, and wrinkle recovery angle of dyed fabrics with different dyes were significantly improved. This illustrated the superiority of this process and the applicability of different structural dyes. Compared to traditional processes, the process saved 29.6 % of dyes and 16.7 % of alkalis. Importantly, the process could save 200 % of water, 9.5 kW h of energy consumption and 61.6 m3 of saturated steam. Ultimately, this process could save 7.22 $ of the cost of dyeing 1 kg of fabric. The concentration of dyes in the dyeing wastewater was significantly reduced. In summary, the clean process has good economic and environmental benefits.

Significant dark inorganic carbon fixation in the euphotic zone of an oligotrophic sea

AbstractEstimates of primary productivity have traditionally disregarded dark inorganic carbon fixation by marine microorganisms. Currently, only limited data are available from different systems on this potentially ecologically important process. We present monthly dark inorganic carbon fixation and photosynthetic rates from the euphotic layer of the northern Gulf of Aqaba collected over a decade between 2010 and 2020. Averaged dark inorganic carbon fixation rates from surface to 100 m depth, ranged from 99 to 173 mg C m−2 d−1, which corresponds to ~ 43% of the annual primary productivity at this location. The lowest dark inorganic carbon fixation rates were found during winter, contributing ~ 7.5% of the integrated primary productivity. During the oligotrophic summer, dark inorganic carbon fixation comprised a larger fraction of the integrated primary productivity estimated as ~ 12%. In accordance, dark inorganic carbon fixation contributed ~ 6% to the particulate organic carbon flux during the winter and ~ 30% during summertime. Complimentary nutrient‐enrichment bioassays of seawater from 5 m show that dissolved organic nutrient enrichment (P and C based) significantly elevates dark inorganic carbon fixation, whereas addition of dissolved inorganic nutrients (, , or both) significantly increased photosynthesis but to a lesser extent dark inorganic carbon fixation. These results suggest that dark inorganic carbon fixation may be an important biochemical process throughout the euphotic zone of oligotrophic seas, and thus should be incorporated into oceanic carbon production estimates.

Nanoplastics impair growth and nitrogen fixation of marine nitrogen-fixing cyanobacteria

Nanoplastics pollution is a growing environmental problem worldwide. Recent research has demonstrated the toxic effects of nanoplastics on various marine organisms. However, the influences of nanoplastics on marine nitrogen-fixing cyanobacteria, a critical nitrogen source in the ocean, remained unknown. Here, we report that nanoplastics exposure significantly reduced growth, photosynthetic, and nitrogen fixation rates of Crocosphaera watsonii (a major marine nitrogen-fixing cyanobacterium). Transcriptomic analysis revealed that nanoplastics might harm C. watsonii via downregulation of photosynthetic pathways and DNA damage repair genes, while genes for respiration, cell damage, nitrogen limitation, and iron (and phosphorus) scavenging were upregulated. The number and size of starch grains and electron-dense vacuoles increased significantly after nanoplastics exposure, suggesting that C. watsonii allocated more resources to storage instead of growth under stress. We propose that nanoplastics can damage the cell (e.g., DNA, cell membrane, and membrane-bound transporters), inhibit nitrogen and carbon fixation, and hence lead to nutrient limitation and impaired growth. Our findings suggest the possibility that nanoplastics pollution could reduce the new nitrogen input and hence affect the productivity in the ocean. The impact of nanoplastics on marine nitrogen fixation and productivity should be considered when predicting the ecosystem response and biogeochemical cycling in the changing ocean.

An end-capping strategy for shape memory phthalonitrile resins via annealing enables conductivity and wave-absorption

Shape memory polymers (SMPs) with elevated switching temperatures and enduring thermal properties are highly desirable yet challenging in certain aerospace applications. In this study, high-temperature shape memory phthalonitrile resins (SMPNs) were developed using an end-capping strategy with the uniphthalonitrile (UPN) as the end-capping reagent to modulate the density of the cross-linked network. The resultant SMPNs exhibit a glass transition temperature (Tg) at approximately 300 °C, with a shape fixation rate of about 98 % and a shape recovery rate around 97 %. Importantly, these SMPNs also demonstrated exceptional thermal stability, with a thermal decomposition temperature exceeding 445 °C. Additionally, an oxyacetylene ablative test revealed the SMPNs' robust ablative resistance, as the linear ablation rate remained below 0.1 mm/s and the mass ablation rate was less than 0.1 g/s. The commendable shape memory performance and superior high-temperature resistance allowed the SMPNs to successfully undergo the shape recovery process when subjected to a butane flame. Furthermore, after a high-temperature annealing process, the SMPNs exhibited electrical conductivity due to graphitization, even possessing wave-absorbing properties within a specific frequency range. It is foreseeable that these multifunctional SMPNs will have extensive applications in the aerospace sector, given the advancement of smart structures.

Impact of climate change and oligotrophication on quality and quantity of lake primary production: A case study in Lake Biwa

Global climate change and anthropogenic oligotrophication are expected to reshape the dynamics of primary production (PP) in aquatic ecosystems; however, few studies have explored their long-term effects. In theory, the PP of phytoplankton in Lake Biwa may decline over decades due to warming, heightened stratification, and anthropogenic oligotrophication. Furthermore, the PP of large phytoplankton, which are inedible to zooplankton, along with biomass-specific productivity (PBc), could decrease. In this study, data from 1976 to 2021 and active fluorometry measurements taken in 2020 and 2021 were evaluated. Quantitatively, the temporal dynamics of mean seasonal PP during 1971–2021 were assessed according to the carbon fixation rate to investigate relationships among environmental factors. Qualitatively, phytoplankton biomass, PP, and PBc were measured in two size fractions [edible (S) or inedible (L) for zooplankton] in 2020 and 2021, and the L:S balance for these three measures was compared between 1992 (low-temperature/high-nutrient conditions) and 2020–2021 (high-temperature/low-nutrient conditions) to assess seasonal dynamics. The results indicated that climate change and anthropogenic oligotrophication over the past 30 years have diminished Lake Biwa's PP since the 1990s, impacting the phenology of PP dynamics. However, the L:S balance in PP and PBc has exhibited minimal change between the data from 1992 and the 2020–2021 period. These findings suggest that, although climate change and oligotrophication may reduce overall PP, they may not markedly alter the inedible/edible phytoplankton balance in terms of PP and PBc. Instead, as total PP declines, the production of small edible phytoplankton may decrease proportionally, potentially affecting trophic transfer efficiency and material cycling in Lake Biwa.

Polyglycerol citrate: A novel coating and inoculation material for soybean seeds

The microbial inoculation of legumes such as soybeans is crucial for thriving plant growth due to symbiotic nitrogen (N) fixation and biological plant N fertilization. Soybean requires microbial pre-inoculation before sowing using the rhizobia strain Bradyrhizobium japonicum. Peat is typical for this purpose, although not sustainable since it is a finite resource. Here, we propose a straight-forwarding route to prepare and apply polyglycerol-citrate polymer (PGC), a biodegradable and fully renewable polymer, as a carrier for Bradyrhizobium japonicum inoculants for soybeans. This novel eco-friendly polymer combines the advantages of a polymeric, water-soluble structure based on biopolymers, which can protect the inoculant cells during the seed inoculation process, with protective properties of glycerol for bacterial cells and the contribution of citric acid for metabolic processes. A greenhouse study was conducted using soybean seeds coated with three different proportions of PGC with B. japonicum planted in a sand substrate free of external interference. Comparative results of N content and δ15N signature in soybean plant parts calculated from the natural abundance method associated with viability tests showed equal or superior symbiotic performance and nitrogen fixation rates to peat-based inoculants, considered the gold-standard carrier for inoculants. It ensured the shelf life of the inoculant formulations, offering convenience for farmers and environmental benefits through reduced fertilization.

Nitrogen fixation‐driven carbon sequestration: Brief communication

AbstractPrior to the commercial nitrogen fertilizer production in 1919, all the world's terrestrial and aquatic carbon was supported by nitrogen fixation. Annual N deposition to semi‐arid lands and temperate forests is less than 5 kg/ha‐year and 10 kg/ha, respectively. Plant and soil C/N ratios range from 9.9 to 29.8 and 9 to 14, respectively. In an equilibrium, sustainable ecosystem where N is not removed from soil pools and is only dependent on annual N inputs, maximum C sequestration rates are approximately 3.25 kg to 46 kg/ha for arid ecosystems and 23 to 101 kg/ha for forest ecosystems. Commercial N applications range from approximately 70 to 160 kg/ha‐year. Managed nitrogen fixation rates range from approximately 50 to 130 kg N/ha‐year. For each additional kg N‐entering forests, the additional C is approximately 13 kg. N‐fixing plants range from alder and lupines in the arctic, to Prosopis and Acacias in semi‐arid lands and the large trees Inga and Pentaclethra in tropical rainforests. If N‐fixing plants achieving 50 kg N/ha‐year were planted on the equivalent of a 447 km square, on six continents, the IEA target of 1.7Gt CO2 (0.72 Gt of carbon) capture capacity by 2030 https://www.ief.org/news/whats‐the‐target‐for‐carbon‐sequestration‐and‐how‐do‐we‐get‐there could be achieved.

Nitrogen Fixation at the Mid‐Atlantic Bight Shelfbreak and Transport of Newly Fixed Nitrogen to the Slope Sea

AbstractContinental shelves contribute a large fraction of the ocean's new nitrogen (N) via N2 fixation; yet, we know little about how physical processes at the ocean's margins shape diazotroph biogeography and activity. Here, we test the hypothesis that frontal mixing favors N2 fixation at the Mid‐Atlantic Bight shelfbreak. Using the 15N2 bubble release method, we measured N2 fixation rates on repeat cross‐frontal transects in July 2019. N2 fixation rates in shelf waters (median = 5.42 nmol N L−1 d−1) were higher than offshore (2.48 nmol N L−1 d−1) but did not significantly differ front frontal waters (8.42 nmol N L−1 d−1). However, specific N2 uptake rates, indicative of the relative contribution of diazotroph‐derived N to particulate N turnover, were significantly higher in frontal waters, suggesting that diazotroph‐derived N is of greater importance in supporting productivity there. This study furthered captured an ephemeral shelf‐water streamer, which resulted from the impingement of a warm core ring on the shelf. The streamer transported shelf‐water diazotrophs (including UCYN‐A and Richelia spp., as assessed by qPCR) offshore with sustained high N2 fixation rates. This feature injected >50 metric tons d−1 of newly fixed N to the Slope Sea—a rate equivalent to ∼4% of the total N flux estimated for the entire Mid‐Atlantic Bight. As intrusions of Gulf Stream meanders and eddies onto the shelf are increasing in frequency due to climate change, episodic lateral fluxes of new N into the Slope Sea may become increasingly important to regional budgets and ecosystem productivity.

Reuse of waste dye bathes for sustainable wool dyeing by depletion of metal salts and plant-based dyes

Natural dyes and natural dyeing have been on the agenda of the scientific community for a long time due to their many advantages. Nonetheless, low affinity, low fixation rates of natural dyes, and occurrence of closely related metal-containing waste baths can be listed as disadvantages. This paper offers a different approach to eliminate these disadvantages. To that end, wool fabrics were dyed in the presence of four different natural dye sources (green walnut shells/husks, barberry shrub roots, madder roots, and alkanet roots) and three metal-based (aluminum, copper, and iron) mordanting agents. Baths remaining from the first dyeings were used an extra four times for repetitive dyeings. It was revealed that satisfying/acceptable colors and sufficient color yields could be obtained for all-natural dyes even after the 5th dyeing using the same dye bath. However, it was regarded as reasonable to obtain lighter colors and lower color yields with an increasing number of repetitions. The color shifts started to be observed especially after the second dyeings, which could be attributed to the significantly reduced amount of natural dye and the mordanting agent left in the waste dye baths. This divergence was seen at least in barberry shrub root-based dyeings. In addition, it was interesting to note that wet fastnesses of all dyeings with all mordants were generally good and even improved with repeated dyeings, while light fastnesses were initially medium-low and decreased slightly with repeated dyeings.

Efficient zero wastewater and salt-free of cotton fiber dyeing via hydrophobic organic chemical/water two-phase dyeing system

For cotton fabric dyeing, a significant quantity of salt and water are typically consumed in the conventional water dyeing bath. In this study, an environmentally friendly alternative was investigated that could eliminate water waste and salt usage, as well as reducing chemical consumption. This method, which employs a hydrophobic organic chemical/water two-phase dyeing system, solely involves fiber swelling, dye dissolution, and the use of alkaline agents. By substituting the water required for heat and mass with an organic chemical, 71.43% dye reduction can be achieved in dye consumption compared to traditional water-based dyeing method. Benefiting from the natural affinity between dyes and cotton fibers, without any interaction with hydrophobic organic chemicals, reactive dye can diffuse into the fiber surface, which can achieve above 98% dye uptake and 90% fixation rate. The K/S value of the dyed cotton fabric is much higher than that of conventional water bath at the same dye concentration, and it is the highest when the water content is 120 %. Moreover, the uniform distribution of dye and the color fastness of the dyed fabric are comparable to traditional water-based dyeing. Due to the influence of intermolecular forces, the aggregation of dye is changed to varying degrees in different hydrophilic and hydrophobic cotton fiber dyeing systems, which further influences the dyeing quality. This study not only improves the utilization of dye but achieves salt-free, no wastewater emission and reduces the dyeing cost, providing an economical and sustainable dyeing method for the industrial dyeing of cotton fabric.

Modification of ramie fibre with a mixture of NaOH solution and iso-propanol solvent for enhancing its dyeing performance

Deep shade dyeing of ramie fibre is challenging due to its high degree of polymerisation, orientation, and crystallinity. The present work involved pre-treating ramie fibre with a solution containing a mixture of NaOH and alcohol in order to improve its dyeing ability. Based on the first screening results, it has been shown that iso-propanol is the optimal alcohol solvent for modifying ramie fibres with a mixture of NaOH solution, resulting in greater levels of dye exhaustion (E%), dye fixation rate (F%), total dye fixation efficiency (T%), and K/S values. Subsequently, the orthogonal array experimental technique (L16) was utilised to optimise the treatment conditions, and it was determined at a temperature of 25 °C, using a NaOH solution with a concentration of 140 g/L, a liquid ratio of 1:2 for the volume ratio of NaOH solution to iso-propanol solvent, and a treating period of 3 min. The treated samples were subjected to a range of analytical techniques, including XRD, FTIR, TGA, and SEM; these analyses conclusively verified that the samples' properties were altered due to the optimal combination treatment. The combination solution-treated samples had significantly higher barium values compared to the other samples, suggesting an ideal mercerisation treatment. The colourfastness to washing values exhibited satisfactory results for the treated samples. Besides, a handle assessment of raw ramie fabric and treated ramie fabric was conducted to enhance the practical application feasibility.

Fixation times of de novo and standing beneficial variants in subdivided populations.

The rate at which beneficial alleles fix in a population depends on the probability of and time to fixation of such alleles. Both of these quantities can be significantly impacted by population subdivision and limited gene flow. Here, we investigate how limited dispersal influences the rate of fixation of beneficial de novo mutations, as well as fixation time from standing genetic variation. We investigate this for a population structured according to the island model of dispersal allowing us to use the diffusion approximation, which we complement with simulations. We find that fixation may take on average fewer generations under limited dispersal than under panmixia when selection is moderate. This is especially the case if adaptation occurs from de novo recessive mutations, and dispersal is not too limited (such that approximately FST<0.2). The reason is that mildly limited dispersal leads to only a moderate increase in effective population size (which slows down fixation), but is sufficient to cause a relative excess of homozygosity due to inbreeding, thereby exposing rare recessive alleles to selection (which accelerates fixation). We also explore the effect of metapopulation dynamics through local extinction followed by recolonization, finding that such dynamics always accelerate fixation from standing genetic variation, while de novo mutations show faster fixation interspersed with longer waiting times. Finally, we discuss the implications of our results for the detection of sweeps, suggesting that limited dispersal mitigates the expected differences between the genetic signatures of sweeps involving recessive and dominant alleles.