Degradation Rate Research Articles

Construction of Rod-Like Bi4O5I2/NaYF4:Yb,Tm Composite and its Improved Photocatalytic Degradation Performance Under Near-Infrared Light

Photocatalytic technology exhibits promising prospects in environmental remediation owing to its sustainable and environmentally friendly advantages. Among the bismuth-rich halide oxides, Bi4O5I2 has demonstrated remarkable efficacy in dye degradation due to its favorable valence band and conduction band positions. In this study, we successfully synthesized Bi4O5I2/NaYF4:Yb,Tm composites through a solvothermal method. When exposed to visible light, the Bi4O5I2/NaYF4:Yb,Tm composite achieved an impressive degradation rate of 86.7% for RhB solution after 60[Formula: see text]min of light-induced reaction. Moreover, the incorporation of NaYF4:Yb,Tm into Bi4O5I2 extended the utilization of near-infrared (NIR) spectroscopy. Under 980[Formula: see text]nm NIR light irradiation, the degradation rate of Rhodamine B (RhB) solution by the Bi4O5I2/NaYF4:Yb,Tm composite reached 43.0% after 240[Formula: see text]min of light reaction. Free radical capture experiments confirmed that h[Formula: see text] and •[Formula: see text] O[Formula: see text] played a significant role as the primary active species in the degradation process of RhB by the Bi4O5I2/NaYF4:Yb,Tm composites. Furthermore, we explored the mechanism behind the photocatalytic degradation of RhB solution using the Bi4O5I2/NaYF4:Yb,Tm composites. Bi4O5I2/NaYF4:Yb,Tm holds great potential as a promising candidate for utilization of NIR light for photocatalytic reactions.

Enhanced adsorption and degradation kinetics of methylene blue by Ag–Ag2S–CdS hybrid nanowires

In this paper, silver nanowires (Ag NWs) were initially synthesized by the polyol synthesis method. A simple hybridization of silver sulfide (Ag2S) and silver was achieved by simply mixing as-prepared Ag NWs with different concentrations of Na2S aqueous solution (0.01 and 0.001 M). To study the properties of the nanomaterials, Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), energy dispersive x-ray spectroscopy (EDX), X-ray diffraction (XRD), Photoluminescence (PL) spectroscopy and UV–Visible (UV–Vis) spectroscopy were used. The ion exchange method was used to create Ag–Ag2S–CdS hybrid nanocatalysts. There has been no research further info on the degradation of methylene blue (MB) by an Ag– Ag2S–CdS nanocatalyst in the three environments (acid, neutral, alkaline). The MB dye was degraded for various minutes (min) in different pH degrees under the influence of sunlight using Ag–Ag2S–CdS. As a result of the experiments, the degradation efficiency of MB dye increased from 12.47 % to 57.02 % in the neutral, 40.58 %–80.08 % the in alkaline, and 91.87 %–97.92 % in the acid environment as time passed. The kinetics of the degradation process in each of the three settings was examined, and it was found that the neutral environment's photodegradation rate is a single value of 0.0029. This value varied depending on the time in a neutral and alkaline environment. As a result, the rate of degradation in the alkaline environment for the 60 min was 0.0071 (60–180 min), then 0.001 (120–300 min). The first degradation rate in an acidic environment was 0.0085 (60–120 min), then 0.0016 (120–300 min).

Development of a γ-Al2O3-Based Heterogeneous Fenton-like Catalyst and Its Application in the Advanced Treatment of Maotai-Flavored Baijiu Wastewater

Heterogeneous Fenton technology was employed for the advanced treatment of Maotai-flavored Baijiu wastewater. Novel catalysts were prepared by loading different active ingredients (Mn, Fe, and Cu) on γ-Al2O3 using an impregnation method. The effects of active ingredient, reaction time, initial pH, H2O2 dosage, catalyst dosage, and other factors on the reaction were examined. The properties of the new catalysts were analyzed using BET analysis, XPS, and SEM. Moreover, the mechanisms of Fenton-like oxidation and its reaction kinetics were explored through experiments and analyses including GC–MS and intermediate active species scavenging by tertiary butyl alcohol (TBA) and/or para-benzoquinone. The results revealed that the most effective removal of organic matter was achieved with a Mn-Fe/Al (2:1 wt%) catalyst dosage of 30 g/100 g water, pH of 5.0, H2O2 dosage of 0.3 g/L, and reaction time of 60 min; the effluent COD value was 12 ± 1 mg/L, and the degradation rate was 65.7 ± 3%, approximately 14% higher than that of the conventional Fenton catalyst under similar conditions; moreover, the catalytic efficacy remained high after seven cycles. Kinetic analysis indicated that the heterogeneous Fenton oxidation reaction followed a third-order kinetics model, with R2 = 0.9923 and K = 0.0006 min−1.

Localized delivery of metformin via 3D printed GelMA-Nanoclay hydrogel scaffold for enhanced treatment of diabetic bone defects

BackgroundDiabetic bone defects present significant challenges for individuals with diabetes. While metformin has been explored for bone regeneration via local delivery, its application in treating diabetic bone defects remains under-explored. In this study, we aim to leverage 3D printing technology to fabricate a GelMA-Nanoclay hydrogel scaffold loaded with metformin specifically for this purpose. The objective is to assess whether the in situ release of metformin can effectively enhance osteogenesis, angiogenesis, and immunomodulation in the context of diabetic bone defects. Materials and methodsUtilizing 3D printing technology, we constructed a GelMA-Nanoclay-Metformin hydrogel scaffold with optimal physical properties and biocompatibility. The osteogenic, angiogenic, and immunomodulatory characteristics of the hydrogel scaffold were thoroughly investigated through both in vitro and in vivo experiments. ResultsGelMA10%-Nanoclay8%-Metformin5mg/mL was selected as the bioink for 3D printing due to its favorable swelling rate, degradation rate, mechanical strength, and drug release rate. Through in vitro investigations, the hydrogel scaffold extract, enriched with metformin, demonstrated a substantial enhancement in the proliferation and migration of BMSCs within a high-glucose microenvironment. It effectively enhances osteogenesis, angiogenesis, and immunomodulation. In vivo experimental outcomes further underscored the efficacy of the metformin-loaded GelMA-Nanoclay hydrogel scaffold in promoting superior bone regeneration within diabetic bone defects. ConclusionsIn conclusion, while previous studies have explored local delivery of metformin for bone regeneration, our research is pioneering in its application to diabetic bone defects using a 3D printed GelMA-Nanoclay hydrogel scaffold. This localized delivery approach demonstrates significant potential for enhancing bone regeneration in diabetic patients, offering a novel approach for treating diabetic bone defects. The translational potential of this articleOur study demonstrates, for the first time, the successful loading of the systemic antidiabetic drug metformin onto a hydrogel scaffold for localized delivery. This approach exhibits significant efficacy in mending diabetic bone defects, presenting a promising new avenue for the treatment of such conditions.

Photodegradation of Bisphenol A (BPA) in Coastal Aquaculture Waters: Influencing factors, Products, and Pathways

Bisphenol A (BPA), an endocrine-disrupting contaminant, is ubiquitous in the environment due to its presence in plastics, wastewater, and agricultural runoff. This study investigated the photodegradation behavior of BPA in coastal aquaculture waters near Qingdao, China. Lower salinity promoted BPA photodegradation, while higher salinity has an inhibitory effect, suggesting slower degradation in seawater compared to ultrapure water. Triplet-excited dissolved organic matter (3DOM*) was identified as the primary mediator of BPA degradation, with additional contributions from hydroxyl radicals (•OH), singlet oxygen (1O2), and halogen radicals (HRS). Alepocephalidae aquaculture water exhibited the fastest degradation rate, likely due to its high DOM and nitrate/nitrite (NO3-/NO2-) content, which are sources of 3DOM* and •OH. A positive correlation existed between NO3-/NO2- concentration and the BPA degradation rate. Ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) analysis identified the primary BPA photodegradation products, formed mainly through oxidative degradation, hydroxyl substitution, nitration, and chlorination pathways. Elucidating these photodegradation mechanisms provides valuable insights into the environmental fate and potential ecological risks of BPA in aquaculture environments. This knowledge can inform strategies for marine environmental protection and the development of sustainable practices.

GO/Bi2O2CO3/NiWO4 with Z-scheme heterojunction: efficiently enhanced degradation of organic pollutants under visible light and DFT studies

A ternary composite of GO/Bi2O2CO3/NiWO4 (GBCNWO) was prepared via an in-situ of Bi2O2CO3 onto the surface of NiWO4 and Bi2O2CO3/ NiWO4 being warped by GO, which was thereafter untilled as catalyst in photodegradation of organic pollutants. The microstructure, and optical properties of all the prepared samples were characterized using various techniques such as XRD, FT-IR, SEM, TEM, TG-DTG, XPS, UV-Vis, ESR, and N2-adsorption. Amongst the studied samples, GBNWO possessed the largest specific surface area, which would efficiently afford much more spaces for the exposing of active sites. Results of UV-vis and XPS suggested that GBNWO was more efficient for the adsorption and conversion of visible light, and photocurrent conduction through graphite carbon ring could lessen the recombination rate of photoelectrons and holes. Also, the minor arc radius of GBCNWO unveiled its lowest photoresistors among the composites, indicating that the GBNWO structured with GO, Bi2O2CO3 and NiWO4 has synergistic catalysis in the photodegradation. Importantly, 95.15% of degradation rate was observed under the optimized conditions (pH=7, catalyst weight of 30mg, 40mg/L of MB, 25oC). Additionally, the degradation rate of various substrates followed the order: MB (99.34%) > ciprofloxacin (97.28%) > RHB (97.01%) > indole (27.47%) > phenol (9.47%). The quenching experiment and ESR test suggested that three kinds of active species (•OH, •O2− and h+) can be photogenerated during visible light radiation. Among them, •O2− was confirmed as the key species during the photocatalytic process, which could be adduced that the existence of oxygen vacancies made the receiving photoelectrons to reduce O2, forming the superoxide radical. Finally, a Z-scheme mechanism about the production of active radicals was proposed, which was also validated by DFT calculations.

Fabrication and optimization of bioelectrochemical system using tetracycline-degrading bacterial strains for antibiotic wastewater treatment

In this study, a microbial fuel cell was constructed using Raoultella sp. XY-1 to efficiently degrade tetracycline (TC) and assess the effectiveness of the electrochemical system. The degradation rate reached 83.2 ± 1.8 % during the 7-day period, in which the system contained 30 mg/L TC, and the degradation pathway and intermediates were identified. Low concentrations of TC enhanced anodic biofilm power production, while high concentrations of TC decreased the electrochemical activity of the biofilm, extracellular polymeric substances, and enzymatic activities associated with electron transfer. Introducing electrogenic bacteria improved power generation efficiency. A three-strain hybrid system was fabricated using Castellaniella sp. A3, Castellaniella sp. A5 and Raoultella sp. XY-1, leading to the enhanced TC degradation rate of 90.4 % and the increased maximum output voltage from 200 to 265 mV. This study presents a strategy utilizing tetracycline-degrading bacteria as bioanodes for TC removal, while incorporating electrogenic bacteria to enhance electricity generation.

Effect of different pectin sources and structures on the stability of cyanidin-3-O-glucoside (C3G)

The physicochemical properties of cyanidin-3-O-glucoside (C3G) were investigated after binding with pectin from different sources (apple and peach) and fractions (water-soluble fraction (WSF), chelator soluble fraction (CSF) and sodium carbonate soluble fraction (NSF)). Apple WSF and peach CSF were high esterification degree pectin (DE) (63.23% and 55.66%). CSF of both AP and PP was abundant in HG and exhibited a much more linear structure than WSF and NSF. The maximum binding percentage was obtained at pH 2.0 for apple pectin (AP) (46%∼50%) and at pH 3.5 for peach pectin (PP) (50%∼54%). Binding with both pectins increased the color stability of C3G at pH 2.0. High DE pectin increased C3G light stability by reducing the degradation rate (0.03 h-1) compared to C3G alone (0.05 h-1). All the pectins reduced the thermal degradation rate of C3G, thus exhibiting a protective effect. A negative correlation was found between the relative RG I area and the particle size of the pectin-C3G complexes. Pectin played a leading role in the ζ-potential change.

Transformation of antibiotics to non-toxic and non-bactericidal products by laccases ensure the safety of Stropharia rugosoannulata

The substantial use of antibiotics contributes to the spread and evolution of antibiotic resistance, posing potential risks to food production systems, including mushroom production. In this study, the potential risk of antibiotics to Stropharia rugosoannulata, the third most productive straw-rotting mushroom in China, was assessed, and the underlying mechanisms were investigated. Tetracycline exposure at environmentally relevant concentrations (<500 μg/L) did not influence the growth of S. rugosoannulata mycelia, while high concentrations of tetracycline (>500 mg/L) slightly inhibited its growth. Biodegradation was identified as the main antibiotic removal mechanism in S. rugosoannulata, with a degradation rate reaching 98.31 % at 200 mg/L tetracycline. High antibiotic removal efficiency was observed with secreted proteins of S. rugosoannulata, showing removal efficiency in the order of tetracyclines > sulfadiazines > quinolones. Antibiotic degradation products lost the ability to inhibit the growth of Escherichia coli, and tetracycline degradation products could not confer a growth advantage to antibiotic-resistant strains. Two laccases, SrLAC1 and SrLAC9, responsible for antibiotic degradation were identified based on proteomic analysis. Eleven antibiotics from tetracyclines, sulfonamides, and quinolones families could be transformed by these two laccases with degradation rates of 95.54–99.95 %, 54.43–100 %, and 5.68–57.12 %, respectively. The biosafety of the antibiotic degradation products was evaluated using the Toxicity Estimation Software Tool (TEST), revealing a decreased toxicity or no toxic effect. None of the S. rugosoannulata fruiting bodies from seven provinces in China contained detectable antibiotic-resistance genes (ARGs). This study demonstrated that S. rugosoannulata can degrade antibiotics into non-toxic and non-bactericidal products that do not accelerate the spread of antibiotic resistance, ensuring the safety of S. rugosoannulata production.

Degradation of β-lactam antibiotics by Fe(Ⅲ)/HSO3− system and their quantitative structure-activity relationship

β-lactam antibiotics, extensively used worldwide, pose significant risks to human health and ecological safety due to their accumulation in the environment. Recent studies have demonstrated the efficacy of transition metal-activated sulfite systems, like Fe(Ⅲ)/HSO3−, in removing PPCPs from water. However, research on their capability to degrade β-lactam antibiotics remains sparse. This paper evaluates the degradation of 14 types of β-lactam antibiotics in Fe(Ⅲ)/ HSO3− system and establishes a QSAR model correlating molecular descriptors with degradation rates using the MLR method. Using cefazolin as a case study, this research predicts degradation pathways through NPA charge and Fukui function analysis, corroborated by UPLC-MS product analysis. The investigation further explores the influence of variables such as HSO3− dosage, substrate concentration, Fe(Ⅲ) dosage, initial pH and the presence of common seen water matrices including humic acid and bicarbonate on the degradation efficiency. Optimal conditions for cefazolin degradation in Fe(Ⅲ)/HSO3− system were determined to be 93.3 μM HSO3−, 8.12 μM Fe(Ⅲ) and an initial pH of 3.61, under which the interaction of Fe(Ⅲ) dosage with initial pH was found to significantly affect the degradation efficiency. This study not only provides a novel degradation approach for β-lactam antibiotics but also expands the theoretical application horizon of the Fe(Ⅲ)/HSO3− system.

The fate of post-use biodegradable PBAT-based mulch films buried in agricultural soil

The fate of black biodegradable mulch film (MF) based on starch and poly(butylene-adipate-co-terephthalate) (PBAT) in agricultural soil is investigated herein. Pristine (BIO-0) and UV-aged film samples (BIO-A192) were buried for 16 months at an experimental field in southern Italy. Visual, physical, chemical, morphological, and mechanical analyses were carried out before and after samples burial. Film residues in the form of macro- and micro-plastics in soil were analyzed at the end of the trial.Progressive deterioration of both pristine and UV-aged samples, with surface loss and alterations in mechanical properties, occurred from 42 days of burial. After 478 days, the apparent surface of BIO-0 and BIO-A192 films decreased by 57 % and 66 %, respectively. Burial determined a rapid depletion of starch from the polymeric blend, especially for the BIO-A192, while the degradation of the polyester phase was slower. Upon burial, an enrichment of aromatic moieties of PBAT in the film residues was observed, as well as microplastics release to soil. The analysis of the MF degradation products extracted from soil (0.006–0.008 % by mass in the soil samples) revealed the predominant presence of adipate moieties. After 478 days of burial, about 23 % and 17 % of the initial amount of BIO-0 and BIO-A192, respectively, were extracted from the soil. This comprehensive study underscores the complexity of biodegradation phenomena that involve the new generation of mulch films in the field. The different biodegradability of the polymeric components, the climate, and soil conditions that did not strictly meet the parameters required for the standard test method devised for MFs, have significantly influenced their degradation rate. This finding further emphasizes the importance of implementing field experiments to accurately assess the real effects of biodegradable MFs on soil health and overall agroecosystem sustainability.

A quantitative analysis of vertebrate environmental DNA degradation in soil in response to time, UV light, and temperature

AbstractEnvironmental DNA (eDNA) degradation influences the effectiveness of eDNA‐based biodiversity monitoring, but the factors that determine the rate of decay of eDNA in terrestrial environments are poorly understood. We assessed the persistence of vertebrate eDNA from a mock vertebrate community created with soil from zoo enclosures holding 10 target species from different taxonomic classes (reptiles, birds, and mammals) and of different biomass (little penguin and giraffe). We examined species detection rates resulting from eDNA metabarcoding, as well as relative eDNA concentrations via qPCR, from soil samples over eight time points (0–12 weeks), during exposure to three ambient temperatures (10, 25, and 40°C) and three levels of ultraviolet B (UV‐B) radiation (0%, 50%, and 100% intensity). We recorded considerable variation in detectability between species, independent of temperature, and UV‐B effects. Quantitative polymerase chain reaction (PCR) indicated degradation of eDNA over time for all temperature and UV treatments, although it was still possible to detect eDNA from some species after 12 weeks. Degradation rates were lowest for high UV‐B treatments, presumably due to UV‐B reducing bacterial metabolism. The temperatures investigated did not influence eDNA decay. Our results indicate that eDNA in soil can persist under a range of temperatures and high UV radiation for longer than expected. Sheltered sites with minimal UV‐B radiation, which have previously been considered ideal sites for terrestrial eDNA collection, may not be optimal for eDNA persistence in some cases due to microbial decay. A better understanding of eDNA degradation in terrestrial environments is needed to enhance the accuracy of eDNA metabarcoding for surveying terrestrial vertebrate communities.

Poly(butylene adipate-co-terephthalate)/thermoplastic canna starch (Canna edulis ker.) (PBAT/TPS) blend film – A novel biodegradable material

The PBAT (poly (butylene adipate-co-terephthalate) is a promising biodegradable material. However, it is often blend with hydrophilic polymers since its degradation rate in the aquatic environment is still limited. In this study, the blend PBAT/TPS (thermoplastic starch) films, namely BFs, were prepared by a blow extrusion approach, and evaluated for hydrolysis in four studied mediums acid (HCl, 1 M, 2 M, and 3 M), alkaline (NaOH, pH = 9, 11, and 13), phosphate buffer (pH = 7.4), and artificial seawater. The hydrolyzed BFs were characterized by weight loss, mechanical properties, scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), and differential scanning calorimetry (DSC). A larger starch content in the BFs caused hydrolysis more quickly. The highest hydrolytic rate was found in the alkaline solution, followed by the acid medium. The complete abiotic hydrolysis of the BFs was 3 M HCl for 14 days or NaOH (pH 13) for 35 days. After 180 days of incubation, the film containing 70.5 % PBAT/TPS granules has been associated with the highest biodegradation rate of 76.31 % in composting.

Construction of a novel OS/BiVO4 catalyst for enhancing the photocatalytic degradation performance of sulfonamide

Exploiting of high-value-added environmental materials related to oily sludge (OS) is an important development direction for OS resource utilization. A series of OS/BiVO4 catalysts were synthesized by activation-pyrolysis and hydrothermal methods. Photocatalytic performance was estimated through sulfanilamide (SA) degradation (SA) under visible light irradiation. The OS/BiVO4–20% has the best photodegradation ability for SA. The degradation rate of SA was about 97.8% after six hours of visible light irradiation. The first-order kinetics degradation rate constants of OS/BiVO4–20% for SA is 8.3 times that of pure BiVO4. The radical quenching and ESR experiments reveal that the hole (h+) and hydroxyl radical (·OH) were the primary active species for SA photocatalytic degradation. The presence of OS and H2O2 can significantly improve the charge separation efficiency, and inhibit electron-hole complexes, thereby extending the lifetime of electron carriers and producing many active hydroxyl radicals and holes on the surface of catalyst particles. Due to the introduction of OS, OS/BiVO4 has good texture properties and high oxygen absorption content, which is also conducive to the photodegradation of SA. Fourier-transform infrared (FTIR), in combination with two-dimensional correlation spectroscopy (2D-COS), indicated that the C–N (1351 cm-1), CC (1450 cm-1), SO2–N (1116 or 1182 cm-1), and N–H (1636 cm-1) groups can change in turn during the catalytic degradation process. This work improves the surface properties of BiVO4 semiconductor materials by introducing OS, thereby increasing the photodegradation efficiency of BiVO4 catalysts against antibiotics, which provides valuable insights into the design of next-generation photocatalysts.

Mechanical properties, corrosion behavior, and in vitro and in vivo biocompatibility of hot-extruded Zn-5RE (RE = Y, Ho, and Er) alloys for biodegradable bone-fixation applications

Biodegradable Zn alloys have significant application potential for hard-tissue implantation devices owing to their suitable degradation behavior and favorable biocompatibility. Nonetheless, pure Zn and its alloys in the as-cast state are mechanically instable and low in strength, which restricts their clinical applicability. Here, we report the exceptional mechanical, corrosion, and biocompatibility properties of hot-extruded Zn-5RE (wt.%, RE = rare earth of Y; or Ho; or Er) alloys intended for use in biodegradable bone substitutes. The microstructural characteristics, mechanical behavior, corrosion resistance, cytocompatibility, osteogenic differentiation, and capacity of osteogenesis in vivo of the Zn-5RE alloys are comparatively investigated. The Zn-5Y alloy demonstrates the best tensile properties, encompassing a 138 MPa tensile yield strength, a 302 MPa ultimate tensile strength, and 63% elongation, while the Zn-5Ho alloy shows the highest compression yield strength of 260 MPa and Vickers hardness of 104 HV. The Zn-5Er alloy shows a 126 MPa tensile yield strength, a 279 MPa ultimate tensile strength, 52% elongation, a 196 MPa compression yield strength, and a 101 HV Vickers microhardness. Further, the Zn-5Er alloy has a 130 µm per year corrosion rate in electrochemical tests and a 26 µm per year degradation rate in immersion tests, which is the lowest among the tested alloys. It also has the best in vitro osteogenic differentiation ability and capacity for osteogenesis and osteointegration in vivo after implantation in rat femurs among the Zn-5RE alloys, indicating promising potential in load-bearing biodegradable internal bone-fixation applications. Statement of significanceThis work reports the exceptional mechanical, corrosion, and biocompatibility properties of hot-extruded (HE) Zn-5 wt.%–rare earth (Zn-5RE) alloys using single yttrium (Y), holmium (Ho), and erbium (Er) alloying for biodegradable bone-implant applications. Our findings demonstrate that the HE Zn-5Er alloy showed σuts of 279 MPa, tensile yield strength of 126 MPa, elongation of 51.6%, compression yield strength of 196 MPa, and microhardness of 101.2 HV. Further, HE Zn-5Er showed the lowest electrochemical corrosion rate of 130 µm/y and lowest degradation rate of 26 µm/y, and the highest in vitro osteogenic differentiation ability, in vivo osteogenesis, and osteointegration ability after implantation in rat femurs among the Zn-5RE alloys, indicating promising potential in load-bearing biodegradable internal bone-fixation applications.

Heterogeneity induced fracture characterization of concrete under fatigue loading using digital image correlation and acoustic emission techniques

Understanding the fatigue failure mechanisms in concrete is complex and remains an area of ongoing investigation. Material heterogeneity, along with the size effect, plays a significant role in specifying the crack propagation behaviour and fatigue life in case of repetitive loading conditions. In this study, the influence of material heterogeneity on the fatigue behaviour of concrete has been examined. Three different-size beam specimens with varying heterogeneity (aggregate sizes) have been considered to investigate various fracture characteristics under repetitive load conditions. Acoustic emission and digital image correlation techniques have been employed to analyze crack growth behaviour. The results revealed that stiffness degradation and crack propagation rates are faster for the specimens with smaller aggregate sizes compared to the larger aggregate size specimens of the same depth. Moreover, the fatigue life and effective crack length at failure are also higher in the case of larger aggregate sizes compared to smaller ones. Therefore, a heterogeneity-adjusted, analytical model of fatigue crack growth has been proposed. Further, the AE parameters have been utilized to characterize the tensile and shear crack dominance in different stages of fatigue crack propagation. The outcome of this study can be utilized to anticipate the crack propagation behaviour and residual fatigue life for any combination of specimen size and aggregate size.

Effect of short-term storage on cannabinoid content of dried floral hemp (Cannabis sativa L) inflorescence

Floral hemp, a plant rich in cannabinoids, has gained attention for its potential therapeutic properties. It is crucial to have proper storage conditions that will maintain the cannabinoid content. To the best of our knowledge, very little has been done on the storage conditions of dried floral hemp. Hence, this study investigated the effect of storage conditions like moisture content, temperature, storage time, light exposure, and packaging materials, on cannabinoid stability in dried floral hemp. The cultivar ‘Quick Spectrum’ at two moisture levels (8.5 and 4.5%) was stored over a 6-month storage period. Results indicated that a higher amount of cannabinoids samples was retained at 8.5 ± 1% moisture compared to samples at 4.5 ± 0.5%, even though total CBD, total ∆9-THC, and total CBDV content remained statistically the same throughout the storage period, and was not affected by temperature, lighting, and packaging material. In contrast, certain individual cannabinoids, such as CBDVA, CBD, ∆9-THCA, and ∆9-THC were significantly affected by temperature and lighting. Notably, higher storage temperatures (22 °C) and light exposure (F15T8/F5 fluorescent light) increased the degradation and decarboxylation rate of cannabinoids. These findings showed the importance of optimized storage conditions for floral hemp, especially long-term storage. This will help provide standardized storage protocols to aid producers, testing laboratories, distributors, and consumers in making informed decisions about storage practices and advancing quality control in the hemp industry.

An eco-friendly first and second derivative synchronous spectrofluorimetry for quantification of florfenicol in presence of its different degradation products. Application to kinetic stability study

Two rapid, simple, sensitive and selective derivative spectrofluorimetric methods (first and second derivative synchronous spectrofluorimetric (FDSFS and SDSFS) procedures) have been developed for the analysis of florfenicol in the presence of its various degradation products. FDSFS was applied to assay the drug in the presence of its alkaline, oxidative and photolytic degradation products while SDSFS was used to quantify it in the presence of its acidic degradation product. These methods permitted quantification of florfenicol at corresponding λ Em of 288, 287, 279 and 284 nm without interferences from any of its degradation products. Full validation procedures were applied to the suggested method according to International Conference of Harmonization guidelines. Moreover, different degradation kinetic parameters were calculated such as half-life ( t 1/2 ), degradation rate constant ( K ) and activation energy ( E a ). Using the analytical eco-scale, green analytical procedure index and analytical greenness metric approach AGREE as greenness assessment tools, the proposed method was found to be environmentally friendly.

Construction of polarized 2D/2D g-C3N4/BiOCl nanosheet dual piezoelectric Z-scheme heterojunction and its efficient charge separation mechanism

A multi-electric field synergistic strategy based on heterojunction construction and polarization engineering enhances carrier separation and migration, achieving excellent piezoelectric photocatalytic performance of g-C3N4 based materials. Here, through the in-situ growth of BiOCl nanosheets (BOCs) on g-C3N4 nanosheets (GCNs), a 2D/2D Z-scheme GCNs/BOCs heterojunction was successfully fabricated, and its outstanding piezo-photocatalytic property was demonstrated. Compared to individual BOCs and GCNs, the high degradation rate (97.64%) of rhodamine B (RhB) can be achieved over the optimal composite (GCNs/BOCs-50) after 50min irradiation. Inspiringly, the polarized GCNs/BOCs-50 composite degraded RhB almost completely within 30min under the simultaneous light irradiation and ultrasound, which reduced the photocatalytic time by 40%, and its k reached 0.1410min-1 (12.59 and 2.48 times that of BOCs and GCNs). This work is of great significance for designing a novel heterojunction photocatalysts using polarized ferroelectric materials.

Preparation and performance of g-C3N4/g-C3N5 homojunction photocatalyst activated peroxymonosulfate for ceftriaxone sodium degradation

As the overuse of antibiotics increasingly contaminates the environment, one of modern chemistry's objectives is to identify high-performance photocatalytic materials to degrade antibiotics. This study initially utilized NH4Cl as a gas template to synthesize porous lamellar g-C3N4 (CNS) through a high-temperature calcination process. Building upon this, a homojunction catalyst, CNS/g-C3N5 (S-CN), was developed via a secondary sintering technique using different amount of 3-amino-1,2,4-triazole addition to evaluate its efficacy in activating peroxymonosulfate (PMS) for degrading the antibiotic ceftriaxone sodium. Under neutral conditions, the photocatalytic system composed of S-CN catalysts prepared by 50 mg of 3-amino-1,2,4-triazole addition and PMS (S3-CN/PMS) exhibited degradation rates that were 3.37 and 8.11 times higher than those of the CNS/PMS and g-C3N5/PMS, respectively. At a pH of 8, the S3-CN/PMS system attained a 99.7 % degradation efficiency within 75 min. Based on results from UV–visible diffuse reflectance spectroscopy (DRS), transient photocurrent response, electrochemical impedance spectroscopy (EIS), photoluminescence spectroscopy and radical scavenging experiments, this high efficiency is attributed to a homojunction Z-type charge transfer mechanism that enhances the separation of photogenerated carriers. Furthermore, the study found that the optimal PMS addition was 20 mg and the optimal pH was 8. Chloride ions promoted the reaction, while other ions decreased the reaction rate. In conclusion, this paper provides valuable insights for the morphological modification of carbon nitride homojunction materials and the efficient activation of PMS for pollutant degradation.