Rate Of Cut-out Research Articles

Dynamic hip screw fixation: Is the tip-apex distance the most important predictor for lag screw cutout?

Dynamic hip screw fixation: Is the tip-apex distance the most important predictor for lag screw cutout?

Predictors of failure for cephalomedullary nailing of proximal femoral fractures.

The purpose of this study was to identify factors that predict implant cut-out after cephalomedullary nailing of intertrochanteric and subtrochanteric hip fractures, and to test the significance of calcar referenced tip-apex distance (CalTAD) as a predictor for cut-out. We retrospectively reviewed 170 consecutive fractures that had undergone cephalomedullary nailing. Of these, 77 met the inclusion criteria of a non-pathological fracture with a minimum of 80 days radiological follow-up (mean 408 days; 81 days to 4.9 years). The overall cut-out rate was 13% (10/77). The significant parameters in the univariate analysis were tip-apex distance (TAD) (p < 0.001), CalTAD (p = 0.001), cervical angle difference (p = 0.004), and lag screw placement in the anteroposterior (AP) view (Parker's ratio index) (p = 0.003). Non-significant parameters were age (p = 0.325), gender (p = 1.000), fracture side (p = 0.507), fracture type (AO classification) (p = 0.381), Singh Osteoporosis Index (p = 0.575), lag screw placement in the lateral view (p = 0.123), and reduction quality (modified Baumgaertner's method) (p = 0.575). In the multivariate analysis, CalTAD was the only significant measurement (p = 0.001). CalTAD had almost perfect inter-observer reliability (interclass correlation coefficient (ICC) 0.901). Our data provide the first reported clinical evidence that CalTAD is a predictor of cut-out. The finding of CalTAD as the only significant parameter in the multivariate analysis, along with the univariate significance of Parker's ratio index in the AP view, suggest that inferior placement of the lag screw is preferable to reduce the rate of cut-out.

Tip apex distance, hip screw placement, and neck shaft angle as potential risk factors for cut-out failure of hip screws after surgical treatment of intertrochanteric fractures

To describe the quality of osteosynthesis after intertrochanteric fractures evaluation of tip apex distance (TAD) and position of the hip screw have been established. Furthermore, a slightly valgus fracture reduction has been suggested to reduce the risk of cut-out failure. However, uniform recommendations for optimal screw positioning and fracture reduction are still missing. The purpose of our study was to confirm potential risk factors for cut-out of hip screws of intertrochanteric fractures and to provide recommendations for practical clinical use. A retrospective analysis of all patients with intertrochanteric fractures treated with a DHS or a gamma nail between January of 2007 and May of 2010 was performed at a level I trauma center. Two hundred thirty-five patients with intertrochanteric fractures after intra- and extramedullary stabilization were analyzed. A TAD of more than 25 mm was demonstrated to be the most important factor for cut-out in stable and unstable fractures. Fracture reduction with a valgus NSA of 5-10° was associated with a trend towards a lower rate of screw cut-out while an anterior placement of the screw (Parker's ratio index of <40) significantly increased cut-out incidence. According to our results, the TAD should not exceed 25 mm in stable (AO/OTA A1) as well as unstable (AO/OTA A2) fractures. An increased anterior hip screw placement should be avoided while fracture reduction with a slight valgus Neck Shaft seems favorable.

Biomechanical stability of different suture fixation techniques for tibial eminence fractures

Displaced tibial eminence fractures require surgical fixation in order to obtain a stable knee joint. Suture fixation with FiberWire(®) seems to be the most favorable therapeutic option. Biomechanical studies show failure of this technique most commonly due to a suture cutout with subsequent fracture of the tibial eminence fragment. The goal of this study is to compare the biomechanical properties of three different techniques of suture fixation using FiberWire(®). Bone mineral density was evaluated in 18 human knee specimens by pqCT, and three similar groups were formed. A standardized anterior tibial eminence fracture was created, and suture fixation was performed using one of three different techniques in 6 specimens each. Cyclic and destructive testing was conducted. Significant differences between the three techniques could be shown neither in the cycles needed to achieve a steady state nor in a failure load or initial stiffness. Almost all specimens failed by suture cutout. The presented modification of the existing technique for suture fixation of tibial eminence fractures did not lead to an increased initial stability nor did it lower the rate of suture cutout. All tested suture techniques showed comparable initial stiffness and failure load.

Displacement/Screw Cutout After Open Reduction and Locked Plate Fixation of Humeral Fractures

Fixation of proximal humeral fractures is challenging. Locking plate technology offers mechanical advantages for treating unstable fractures in weak bone. In this study, we assessed the radiographic and clinical results of a single surgeon's experience treating proximal humeral fractures with a locked proximal humeral plate. Fifty-three adult patients with a displaced proximal humeral fracture were treated with a proximal humeral locking plate over a forty-five-month period. A standard postoperative rehabilitation regimen was followed. Radiographs were made at two weeks, six weeks, three months, six months, and one year and were examined for fracture alignment, fracture displacement, hardware position, and healing. Postoperative outcomes were collected with questionnaires. Fifty-two (98%) of the fifty-three fractures healed by six months. Nineteen patients (36%) had radiographic signs of a complication, including screw cutout with intra-articular displacement in twelve (23%), substantial (>10 degrees ) varus displacement in thirteen (25%), and osteonecrosis in two (4%). These radiographic signs of a complication occurred in twelve (57%) of twenty-one patients older than sixty years of age and in seven (22%) of thirty-two patients under sixty years of age (p = 0.0015). Screw cutout occurred in nine (43%) of the twenty-one patients older than sixty years. Patients with a complication had worse functional outcomes as measured with the Short Musculoskeletal Function Assessment (p < 0.05) and the Quick Disabilities of the Arm, Shoulder and Hand (p < 0.001) questionnaires. We were unable to demonstrate a relationship between fracture type and complications. Revision surgery was performed in seven (13%) of the fifty-three patients. There were no cases of infection, nerve injury, or hardware failure. The use of locking plates in the surgical treatment of proximal humeral fractures is associated with an unexpectedly high rate of screw cutout and revision surgery, especially in patients older than sixty years who have a three or four-part fracture. The indications for open reduction and internal fixation in these patients require continued analysis.

Migration of the Lag Screw Within the Femoral Head: A Comparison of the Intramedullary Hip Screw and the Gamma Asia-Pacific Nail

To study the functional difference in the performances of sliding femoral head screws by comparing the displacement of the screw in relation to the femoral head in hips treated with the Gamma Asia-Pacific nail (GN) and hips treated with the intramedullary hip screw (IMHS). Retrospective review of prospectively collected data. Displacement of the femoral head screw in relation to the femoral head was measured in fifty-six elderly patients with intertrochanteric fractures who were treated with an IMHS or GN. Displacement of the femoral head screw was determined by comparing screw position in the immediate postoperative radiograph with a film taken 3 months after surgery. In the GN group, significant displacement of the screw was observed with 3.8 +/- 3.8 percent translation in the horizontal axis (P < 0.005) and 4.3 +/- 5.1 percent displacement in the vertical axis (P < 0.05) in comparison with the diameter of the femoral head. In comparison, displacement of the femoral head screw was not observed with the IMHS (P = 0.48 for horizontal, P = 0.18 for vertical). Total displacement of the femoral head screw in relation to the femoral head in the GN was twice that observed in the IMHS (P < 0.001). These results indicate that the displacement of the femoral head screw of the IMHS was less than the lag screw of the GN. However, it is still unknown whether this smaller displacement of the IMHS is clinically significant for reducing the rate of screw cut-out after surgery.

The value of the tip-apex distance in predicting failure of fixation of peritrochanteric fractures of the hip.

Failure of fixation of peritrochanteric fractures that have been treated with a fixed-angle sliding hip-screw device is frequently related to the position of the lag screw in the femoral head. A simple measurement has been developed to describe the position of the screw. This measurement, the tip-apex distance, is the sum of the distance from the tip of the lag screw to the apex of the femoral head on an anteroposterior radiograph and this distance on a lateral radiograph, after controlling for magnification. To determine the value of this measurement in the prediction of so-called cutout of the lag screw, 198 peritrochanteric fractures (193 patients) were studied. The minimum duration of follow-up was three months (average, thirteen months), during which period all of the fractures either healed or had failure of the fixation. Of the nineteen failures that were identified, sixteen were due to the device cutting out of the femoral head. The average tip-apex distance was twenty-four millimeters (range, nine to sixty-three millimeters) for the successfully treated fractures compared with thirty-eight millimeters (range, twenty-eight to forty-eight millimeters) for those in which the screw cut out (p = 0.0001). None of the 120 screws with a tip-apex distance of twenty-five millimeters or less cut out, but there was a very strong statistical relationship between an increasing tip-apex distance and the rate of cutout, regardless of all other variables related to the fracture.(ABSTRACT TRUNCATED AT 250 WORDS)