Rat Calvarial Bone Defect Research Articles

Electrophysiological microenvironment and site-specific cell behaviors regulated by fibrous aniline trimer-based polyurethanes in bone progressive regeneration

Inspired by the endogenous electric field of natural bone tissue, fibrous aniline trimer (AT)-based polyurethane (FPAT) membranes have been fabricated with good electroactivity through electrospinning, which may serve to restore electrophysiological microenvironment and regulate site-specific cell behaviors to promote osteogenesis. By virtue of the redox activity, the electroactive FPAT membranes exhibited the progressive scavenging ability of reactive oxygen species (ROS) with increasing AT content. Furthermore, a systematic study of specific biomarkers was practiced to draw a comprehensive understanding of the bioelectrical stimulation, including in vitro cell experiments, in vivo RNA-sequencing, subcutaneous implantation, and bone defect repair. Focused on site-specific cell behaviors, both macrophages and mesenchymal stem cells (MSCs)were significantly regulated by the AT-based membranes on electrophysiological microenvironment. For macrophages, the AT-based membranes polarized macrophages to M2 phenotype by efficiently clearing excessive ROS to manipulate the osteoimmune microenvironment in vitro and in vivo. For MSCs, the FPAT membranes scavenged excessive intracellular ROS and elevated intracellular Ca2+ concentration, thereby promoting cell proliferation and driving osteogenesis differentiation. Histology results and gene expression profiles on a rat calvarial bone defect model discovered the efficacy of the AT-based membranes in immunomodulation and osteogenesis. Moreover, the upregulated genes at the RNA level and signaling pathways testified that the electroactive FPAT membranes were strongly involved in regulating macrophage polarization and bone repairing process. This work demonstrated an efficacious therapy of electroactive FPAT membranes from the regulatory mechanism, cellular to tissue levels in bone progressive regeneration, which could provide a legible evaluation system for conductive materials.

MXene-Functionalized Ferroelectric Nanocomposite Membranes with Modulating Surface Potential Enhance Bone Regeneration.

Rapid and effective bone defect repair remains a challenging issue for clinical treatment. Applying biomaterials with endogenous surface potential has been widely studied to enhance bone regeneration, but how to regulate the electric potential and surface morphology of the implanted materials precisely to achieve an optimal bioelectric microenvironment is still a major challenge. The aim of this study is to develop electroactive biomaterials that better mimic the extracellular microenvironment for bone regeneration. Hence, MXene/polyvinylidene fluoride (MXene/PVDF) ferroelectric nanocomposite membranes were prepared by electrospinning. Physicochemical characterization demonstrated that Ti3C2Tx MXene nanosheets were wrapped in PVDF shell layer and the surface morphology and potential were modulated by altering the content of MXene, where uniform distribution of fibers and enhanced electric potential can be obtained and precisely assembled into a natural extracellular matrix (ECM) in bone tissue. Consequently, the MXene/PVDF membranes facilitated cell adhesion, stretching, and growth, showing good biocompatibility; meanwhile, their intrinsic electric potential promoted the recruitment of osteogenic cells and accelerated the differentiation of osteoblast. Furthermore, 1 wt % MXene/PVDF membrane with a suitable surface potential and better topographical structure for bone regeneration qualitatively and quantitatively promoted bone tissue formation in a rat calvarial bone defect after 4 and 8 weeks of healing. The fabricated MXene/PVDF ferroelectric nanocomposite membranes show a biomimetic microenvironment with a sustainable electric potential and optimal 3D topographical structure, providing an innovative and well-suited strategy for application in bone regeneration.

3D printed membranes of polylactic acid and graphene oxide for guided bone regeneration.

We fabricated graphene oxide (GO)-incorporated polylactic acid (PLA) (GO-PLA) films by using three-dimensional (3D) printing to explore their potential benefits as barrier membranes for guided bone regeneration (GBR). Our results showed that the 3D printed GO-PLA films provided highly favorable matrices for preosteoblasts and accelerated new bone formation in rat calvarial bone defect models.

The osteogenesis and the biologic mechanism of thermo-responsive injectable hydrogel containing carboxymethyl chitosan/sodium alginate nanoparticles towards promoting osteal wound healing

With the development of minimally invasive orthopedics, injectable materials for bone repair are attracted more attention, especially for those wound with a small external mouth and sizeable internal cavity. In this work, the hydrogel with features of thermo-responsiveness, degradability and injectability was designed and fabricated. The hydrogel, named as FHCS, is composed of Pluronic F-127 (F127) loaded with carboxymethyl chitosan/sodium alginate nanoparticles (nCS) and nanohydroxyapatite (nHA). The hydrogel FHCS was non-toxic and good hemocompatible. It can enhance the ALP activity and extracellular matrix calcification of MC3T3-E1 due to the chitosan-based nanoparticle components (nCS). Moreover, FHCS-5 (containing 5 mg/mL nCS) showed relative high expression of osteogenic genes and protein markers. Osteal regeneration was observed treated by FHCS-5 hydrogel in a critical-size rat calvarial bone defect model. CT scanning showed that the whole defect was basically covered by new bone after FHCS-5 hydrogel. The results of H&E staining and Masson's trichrome staining on histological sections further confirmed that FHCS-5 hydrogel promoted new osteal formation and maturation, which up regulated the osteogenic related genes and proteins of ALP, OCN, OPN through BMP/Smad signaling pathway. Hence, this study suggests that FHCS-5 hydrogels have a promising application for non-loading bone regeneration.

Repair of Rat Calvarial Bone Defect by Using Exosomes of Umbilical Cord-Derived Mesenchymal Stromal Cells Embedded in Chitosan/Hydroxyapatite Scaffolds.

To seek out the bone regeneration effect of human umbilical cord-mesenchymal stem cell (hUC-MSC)-derived exosomes of loaded chitosan/hydroxyapatite (CS/HA) scaffold in a rat calvarium bone regeneration model. The hUC-MSC exosomes were purified and characterized. The scaffolds were prepared by a freeze-drying method. Animals were divided into five groups, and the CS/HA/exosome (CS/HA/Exo) scaffolds were transplanted to 5 × 2-mm critical-sized calvarial bone defects for repair in rats. All animals were sacrificed at the postoperative sixth week. Immunohistochemical and histologic analyses were performed. Scanning electron microscopy (SEM) images showed that the exosomes were round-shaped vesicles with bounded membrane, and the diameter of the exosomes was 83.728 ± 27.269 nm. Histologic analysis showed that mean new bone volumes were statistically significantly higher in the CS/HA/Exo group (1.83 ± 0.54, PCS/Exo-CS/HA/Exo = .000), and other new bone volumes in the other groups were statistically significant compared with the control (CS/Exo 1.50 ± 0.14 mm3; CS 1.20 ± 0.43 mm3; control 1.06 ± 0.10 mm3; and CS/HA 1.43 ± 0.66 mm3). The CS/HA/Exo combination is a novel treatment for bone defect repair to induce bone formation. The CS scaffold can significantly promote bone regeneration compared with the control. Moreover, the combination with HA and exosomes is promising for applications in bone tissue regeneration.

MicroRNA-196a-5p overexpression in Wharton's jelly umbilical cord stem cells promotes their osteogenic differentiation and new bone formation in bone defects in the rat calvarium.

The peri-tooth root alveolar loss often does not have sufficient space for repair material transplantation and plasticity. Mesenchymal stem cell (MSC) sheets have an advantage in providing more extracellular matrix (ECM) and may prove to be a new therapeutic consideration for this bone defect repair. The identification of key regulators that stimulate MSCs' osteogenic potential and sheet-derived ECM deposition is the key to promoting its application. In this study, we found that inhibition or overexpression of miR-196a-5p led to a decline or enhancement, respectively, in the alkaline phosphatase (ALP) activity, mineralization, and the levels of osteogenic markers, Osteocalcin (OCN), Dentin Matrix Protein 1 (DMP1), Bone Sialoprotein (BSP), and Dentin Sialophosphoprotein (DSPP) of Wharton's jelly of umbilical cord stem cells (WJCMSCs) in vitro. Moreover, the 5,6-Carboxyfluorescein Diacetate Succinimidyl Ester (CFSE) analysis revealed inhibition of the WJCMSCs' proliferative ability upon miR-196a-5p overexpression. Characterization of the sheet formation by picrosirius red and Masson staining indicated that miR-196a-5p overexpression significantly promoted the collagen content in whole WJCMSC sheet-derived ECM. Furthermore, micro-CT and histopathology results indicated that the miR-196a-5p-overexpressed WJCMSC sheets significantly promoted new bone regeneration and rat calvarial bone defect closure 12weeks following transplantation. The mRNA microarray analysis of miR-196a-5p-overexpressed WJCMSCs revealed 959 differentially expressed genes (DEGs) (34 upregulated and 925 downregulated). Moreover, 241 genes targeted by miR-196a-5p were predicted by using miRNA function websites of which only 19 predicted genes were consistent with the microarray revealed DEGs. Hence, one unrevealed downregulated DEG Serpin Family B Member 2 (SERPINB2) was investigated. And the deletion of SERPINB2 enhanced the ALP activity and mineralization of WJCMSCs in vitro. In conclusion, our study found that miR-196a-5p, as a key regulator, could repress the proliferation tendency, while stimulating osteogenic ability and WJCMSC sheet-derived ECM deposition, thus promoting new bone formation and rat calvarial bone defect closure. Furthermore, SERPINB2 is a key downstream gene involved in the miR-196a-5p-promoted WJCMSC osteogenesis.

Highly bioactive bone cement microspheres based on α-tricalcium phosphate microparticles/mesoporous bioactive glass nanoparticles: Formulation, physico-chemical characterization and in vivo bone regeneration

Calcium phosphate cement (CPC) is a self-setting, biocompatible and osteoconductive bone cement, however its use as a bone substitute is still limited owing to its low bioactivity (i.e. its slow in vivo resorption and slow new bone formation rate) which is a challenging issue to be addressed. Herein, we report for the first time highly bioactive bone cement microspheres formulated from a cement paste containing α-tricalcium phosphate microparticles (α-TCP) and mesoporous calcium silicate bioactive glass nanoparticles (mesoporous BGn) using a water-in-oil emulsion method. Indeed, bioactive microspheres possess high potential as bone defect fillers for bone regeneration. The α-TCP microparticles were prepared by a solid state synthesis at 1400 ºC while mesoporous BGn were synthesized by template-assissted ultrasound-mediated sol-gel method. The particle size distribution of as-prepared cement microspheres was in the range of 200 – 450 µm with a sphericity index in the range of 0.92 – 0.94. The surface morphology of α-TCP microspheres revealed α-TCP micoparticles with smooth surfaces whereas α-TCP/BGn microspheres unveiled nano-roughened α-TCP microparticles. The as-prepared α-TCP/BGn cement microspheres exhibited larger specific surface area ca 18.6 m2/g, sustained release of soluble silicate (SiO44-) ions (118 ppm within a week) and high protein adsorption capacity (252 mg/g). Notably, the α-TCP/BGn cement microspheres showed excellent in vitro surface bioactivity via formation of massive amounts of bone-like hydroxyapatite spherules and aggregates on their surfaces after soaking in simulated body fluid. Importantly, the in vivo implantation of as-prepared α-TCP/BGn cement microspheres in rat calvarial critical size bone defects for 6 weeks unveiled high in vivo bioactivity in terms of substantial new bone ingrowth and significant new bone formation within the bone defect as evidenced by histological analyses, X-ray radiography and micro-computed tomography evaluations.

A bioactive material with dual integrin-targeting ligands regulates specific endogenous cell adhesion and promotes vascularized bone regeneration in adult and fetal bone defects.

Significant progress has been made in designing bone materials capable of directing endogenous cells to promote vascularized bone regeneration. However, current strategies lack regulation of the specific endogenous cell populations for vascularized bone regeneration, thus leading to adverse tissue formation and decreased regenerative efficiency. Here, we engineered a biomaterial to regulate endogenous cell adhesion and promote vascularized bone regeneration. The biomaterial works by presenting two synthetic ligands, LLP2A and LXW7, explicitly targeting integrins α4β1 and αvβ3, respectively, expressed on the surfaces of the cells related to bone formation and vascularization, such as mesenchymal stem cells (MSCs), osteoblasts, endothelial progenitor cells (EPCs), and endothelial cells (ECs). In vitro, the LLP2A/LXW7 modified biomaterial improved the adhesion of MSCs, osteoblasts, EPCs, and ECs via integrin α4β1 and αvβ3, respectively. In an adult rat calvarial bone defect model, the LLP2A/LXW7 modified biomaterial enhanced bone formation and vascularization by synergistically regulating endogenous cells with osteogenic and angiogenic potentials, such as DLX5+ cells, osteocalcin+ cells, CD34+/CD45- cells and CD31+ cells. In a fetal sheep spinal bone defect model, the LLP2A/LXW7 modified biomaterial augmented bone formation and vascularization without any adverse effects. This innovative biomaterial offers an off-the-shelf, easy-to-use, and biologically safe product suitable for vascularized bone regeneration in both fetal and adult disease environments.

Bone regeneration effect of lidocaine-maltodextrin-thrombin collagen on rat calvarial bone defect model

Bone regeneration effect of lidocaine-maltodextrin-thrombin collagen on rat calvarial bone defect model

Efficacy of local application of manuka honey for regeneration of critical size calvarial bone defects in rats

Objective: Regeneration of maxillofacial bone defects is clinically challenging. It is believed that Manuka honey can enhance wound healing and decrease inflammation. This study sought to assess the efficacy of Manuka honey for the regeneration of critical size calvarial bone defects in rats. Methods: This study was conducted on 36 adult male Wistar rats in two groups of 18. Bone defects measuring 8mm in diameter were created in the parietal bone at the sagittal suture. In the test group, defects were filled with Manuka honey while defects remained empty in the control group. Six animals were sacrificed in each group at four, eight, and 12 weeks post-operation for histological and histomorphometric analyses of tissues. The data were analyzed using two-way ANOVA, Independent t-test, and one-way ANOVA (P

Systemic and local innate immune responses to surgical co-transplantation of mesenchymal stromal cells and biphasic calcium phosphate for bone regeneration

Bone regeneration from mesenchymal stromal cells (MSC) is attributed to comprehensive immune modulation mediated by the MSC. However, the temporal and spatial regulation of these immune responses has not yet been described. The aim of the present study was to assess the local and systemic innate immune responses to implantation of biphasic calcium phosphate biomaterial (BCP) alone, or with bone marrow derived MSC (BCP+MSC), in critical-sized calvarial bone defects of Lewis rats. Four weeks after implantation, flow cytometry analysis of innate immune cells revealed increased numbers of circulating classical monocyte-macrophages (MM) and decreased non-classical MM in the BCP+MSC group. At week 8, this differential systemic MM response was associated with an increased presence of local tissue anti-inflammatory macrophages expressing CD68 and CD163 markers (M2-like). In the BCP group without MSC, NK cells increased at weeks 1 and 4, and neutrophils increased in circulation at weeks 2 and 8. At week 8, the increase in number of neutrophils in circulation was associated with decreased local tissue neutrophils, in the BCP+MSC group. Gene expression analysis of tissue biopsies from defects implanted with BCP+MSC, in comparison to BCP alone, revealed upregulated expression of early osteogenesis genes along with macrophage differentiation-related genes at weeks 1 and 8 and neutrophil chemotaxis-related genes at week 1. This study is the first to demonstrate that surgical implantation of BCP or BCP+MSC grafts differentially regulate both systemic and local tissue innate immune responses which enhance bone formation. The results provide new insights into immune mechanisms underlying MSC-mediated bone regeneration. Statement of significanceThe suitability of biphasic calcium phosphate and mesenchymal stromal cell construct (BCP+MSC) transplantation is evident from their progress in clinical trials for treating challenging maxillofacial bone defects. But less is known about the overall immune response generated by this surgical process and how it later impacts the bone formation. To this end, it is crucial to understand for both clinicians and researchers, the systemic immune response to transplanting MSC in patients for ensuring both the safety and efficacy of cell therapies. In this study, we used rat calvarial bone defect model and showed that both systemic and local innate immunes responses (monocyte-macrophages and neutrophils) are favorably directed towards enhanced bone formation in BCP+MSC implanted defects, as compared to BCP alone.

Silicon-Phosphorus-Nanosheets-Integrated 3D-Printable Hydrogel as a Bioactive and Biodegradable Scaffold for Vascularized Bone Regeneration.

Natural bone is a highly vascularized tissue that relies on the vasculature for blood and nutrients supply to maintain skeletal integrity. Bioactive nanomaterials with the capability of improving vascularized bone regeneration are highly demanded for bone tissue engineering. In this work, 2D silicon phosphorus (SiP) is explored as a new kind of bioactive and biodegradable nanomaterial with excellent angiogenesis and osteogenesis, and a 3D printed biohybrid hydrogel of GelMA-PEGDA incorporated with photocrosslinkable SiP-nanosheet (GelMA-PEGDA/SiPAC) is developed to apply on bone tissue engineering. Findings show that the GelMA-PEGDA/SiPAC possessess excellent biocompatibility and biodegradability, and can sustainably release Si and P elements. Compared with the biohybrid hydrogel scaffolds incorporated with black phosphorus nanosheets, the GelMA-PEGDA/SiPAC can further enhance the osteogenesis of mesenchymal stem cells, and tubular networking of human umbilical vascular endothelial cells. In a rat calvarial bone defect model, the superior angiogenesis and osteogenesis induced by GelMA-PEGDA/SiPAC have been confirmed in vivo. The current strategy paves a new way to design a multifunctional SiP nanocomposite scaffold on mediating the osteogenesis and angiogenesis in one system, and provides a bioactive and biodegradable alternative nanomaterial for tissue engineering and regenerative medicine.

Bioclickable Mussel-Derived Peptides With Immunoregulation for Osseointegration of PEEK.

Polyether ether ketone (PEEK)–based biomaterials have been widely used in the field of spine and joint surgery. However, lack of biological activity limits their further clinical application. In this study, we synthesized a bioclickable mussel-derived peptide Azide-DOPA4 as a PEEK surface coating modifier and further combined bone morphogenetic protein 2 functional peptides (BMP2p) with a dibenzylcyclooctyne (DBCO) motif through bio-orthogonal reactions to obtain DOPA4@BMP2p-PEEK. As expected, more BMP2p can be conjugated on PEEK after Azide-DOPA4 coating. The surface roughness and hydrophilicity of DOPA4@BMP2p-PEEK were obviously increased. Then, we optimized the osteogenic capacity of PEEK substrates. In vitro, compared with the BMP2p-coating PEEK material, DOPA4@BMP2p-PEEK showed significantly higher osteogenic induction capability of rat bone marrow mesenchymal stem cells. In vivo, we constructed a rat calvarial bone defect model and implanted PEEK materials with a differently modified surface. Micro-computed tomography scanning displayed that the DOPA4@BMP2p-PEEK implant group had significantly higher new bone volume and bone mineral density than the BMP2p-PEEK group. Histological staining of hard tissue further confirmed that the DOPA4@BMP2p-PEEK group revealed a better osseointegrative effect than the BMP2p-PEEK group. More importantly, we also found that DOPA4@BMP2p coating has a synergistic effect with induced Foxp3+ regulatory T (iTreg) cells to promote osteogenesis. In summary, with an easy-to-perform, two-step surface bioengineering approach, the DOPA4@BMP2p-PEEK material reported here displayed excellent biocompatibility and osteogenic functions. It will, moreover, offer insights to engineering surfaces of orthopedic implants.

Mussel-inspired functionalization of electrospun scaffolds with polydopamine-assisted immobilization of mesenchymal stem cells-derived small extracellular vesicles for enhanced bone regeneration

Mesenchymal stem cells-derived small extracellular vesicles (MSCs-sEV) have shown promising prospects as a cell-free strategy for bone tissue regeneration. Here, a bioactive MSCs-sEV-loaded electrospun silk fibroin/poly(ε-caprolactone) (SF/PCL) scaffold was synthesized via a mussel-inspired immobilization strategy assisted by polydopamine (pDA). This pDA modification endowed the as-prepared scaffold with high loading efficiency and sustained release profile of sEV. In addition, the fabricated composite scaffold exhibited good physiochemical, mechanical, and biocompatible properties. In vitro cellular experiments indicated that the MSCs-sEV-loaded composite scaffold promoted the adhesion and spreading of preosteoblast and endothelial cells, as well as enhanced osteogenic differentiation and angiogenic activity. In vivo experiments showed that the functionalized electrospun scaffolds promoted bone regeneration in a rat calvarial bone defect model. Results suggest that the developed MSCs-sEV-anchored pDA-modified SF/PCL electrospun scaffolds possess high application potential in bone tissue engineering owing to their powerful pro-angiogenic and -osteogenic capacities, cell-free bioactivity, and cost effectiveness.

Histological Evaluation of Porous Additive-Manufacturing Titanium Artificial Bone in Rat Calvarial Bone Defects.

Jaw reconstruction using an additive-manufacturing titanium artificial bone (AMTAB) has recently attracted considerable attention. The synthesis of a titanium artificial bone is based on three-dimensional computed tomography images acquired before surgery. A histological evaluation of porous AMTAB (pAMTAB) embedded in rat calvarial bone defects was conducted. This study examined three groups: rats implanted with mixed-acid and heat-treated pAMTAB, rats implanted with untreated pAMTAB, and rats with no implant. In both pAMTAB groups, bone defects were created in rat calvarial bones using a 5-mm trephine bar, followed by pAMTAB implantation. The pAMTAB was fixed to the defect using the fitting force of the surrounding bones. The rats were sacrificed at 4, 8, and 16 weeks after implantation, and the skull was dissected. Undecalcified ground slides were prepared and stained with Villanueva Goldner. Compared with the no implant control group, both pAMTAB groups exhibited new bone formation inside the defect, with greater bone formation in the mixed-acid and heat-treated pAMTAB group than in the untreated pAMTAB group, but the difference was not significant. These data suggest that pAMTAB induces bone formation after implantation in bone defects. Bone formation appears to be enhanced by prior mixed-acid and heat-treated pAMTAB.

The effectiveness of hydroxyapatite-beta tricalcium phosphate incorporated into stem cells from human exfoliated deciduous teeth for reconstruction of rat calvarial bone defects.

To investigate the effects of stem cells from the pulp of human exfoliated deciduous teeth (SHED) on biphasic calcium phosphate granules (BCP) to repair rat calvarial defects as compared to autogenous bone grafting. A defect with a 6-mm diameter was produced on the calvaria of 50 rats. BCP granules were incorporated into SHED cultures grown for 7 days in conventional (CM) or osteogenic (OM) culture media. The animals were allocated into 5 groups of 10, namely: clot, autogenous bone, BCP, BCP+SHED in CM (BCP-CM), and BCP+SHED in OM (BCP-OM). The presence of newly formed bone and residual biomaterial particles was assessed by histometric analysis after 4 and 8 weeks. The autogenous group showed the largest newly formed bone area at week 8 and in the entire experimental period, with a significant difference in relation to the other groups (P<0.05). At week 8, BCP-CM and BCP-OM groups showed homogeneous new bone formation (P=0.13). When considering the entire experimental period, the BCP group had the highest percentage of residual particle area, with no significant difference from the BCP-CM group (P=0.06) and with a significant difference from the BCP-OM group (P=0.01). BCP-CM and BCP-OM groups were homogeneous throughout the experimental period (P=0.59). BCP incorporated into SHED cultures showed promising outcomes, albeit less pronounced than autogenous grafting, for the repair of rat calvarial defects. BCP incorporated into SHED cultures showed to be an alternative in view of the disadvantages to obtain autogenous bone graft.

Osteoformation potential of an allogenic partially demineralized bone matrix in critical-size defects in the rat calvarium

Allogenic demineralized bone matrix has been developed as a reliable alternative to the autologous bone graft. In the present study, we assessed the osteoformation potential of a partially demineralized bone matrix (PDBM) in a paste form obtained without an added carrier. This formulation included the preparation of cancelous bone from femoral heads after decellularision, delipidation, demineralization in HCl and autoclaving at 121 °C. Structural and biochemical characteristics of PDBM were determined using FTIR (Fourier transform infrared spectroscopy), hydroxyproline, DNA content assays, and optical ellipsometry. The osteoformation potential was evaluated in 8-, 6-, and 4-mm-diameter rat-calvarial bone defects by in vivo micro-CT analysis, performed immediately after surgery on days 0, 15, 30, 45, and 60. Moreover, histological and histomorphometric analyses were done on day 60. PDBM was compared to cancelous bone powder (BP) before its partial demineralization. The expression levels of selected inflammation-, angiogenesis-, and bone-related genes were also investigated by RT-PCR, 3, 7, and 14 days after surgery. Compared to the control group, the PDBM group exhibited a significant increase (p < 0.05) in radiopacity in 8-mm- and 6-mm-diameter defects at all time points tested. On day 60, the amount of newly-formed bone was greater (16 and 1.6 folds; p < 0.001; respectively) compared to that in control defects. No bone formation was observed in defects filled with BP regardeless of the size. In 8-mm-diameter defect, PDBM was effective enough to induce the upregulation of genes pertinent to inflammation (i.e., TNFα, IL-6, and IL-8), angiogenesis (i.e., VEGF, VWF), and osteogenesis (ALP, RUNX2, BGLAP, SP7) by day 3 after surgery. This study showed that the tested PDBM deeply influences the early critical events involved in bone regeneration and exhibits efficient osteoformation capacity, making it an attractive graft option for treating defects in periodontal and maxillofacial areas.

Controlled delivery of bone morphogenic protein-2-related peptide from mineralised extracellular matrix-based scaffold induces bone regeneration

Ideal bone tissue engineering scaffolds composed of extracellular matrix (ECM) require excellent osteoconductive ability to imitate the bone environment. We developed a mineralised tissue-derived ECM-modified true bone ceramic (TBC) scaffold for the delivery of aspartic acid-modified bone morphogenic protein-2 (BMP-2) peptide (P28) and assessed its osteogenic capacity. Decellularized ECM from porcine small intestinal submucosa (SIS) was coated onto the surface of TBC, followed by mineralisation modification (mSIS/TBC). P28 was subsequently immobilised onto the scaffolds in the absence of a crosslinker. The alkaline phosphatase activity and other osteogenic differentiation marker results showed that osteogenesis of the P28/mSIS/TBC scaffolds was significantly greater than that of the TBC and mSIS/TBC groups. In addition, to examine the osteoconductive capability of this system in vivo, we established a rat calvarial bone defect model and evaluated the new bone area and new blood vessel density. Histological observation showed that P28/mSIS/TBC exhibited favourable bone regeneration efficacy. This study proposes the use of mSIS/TBC loaded with P28 as a promising osteogenic scaffold for bone tissue engineering applications.

Cathelicidin LL37 Promotes Osteogenic Differentiation in vitro and Bone Regeneration in vivo.

Different types of biomaterials have been used to repair the defect of bony orbit. However, exposure and infections are still critical risks in clinical application. Biomaterials with characteristics of osteogenesis and antibiosis are needed for bone regeneration. In this study, we aimed to characterize the antimicrobial effects of cathelicidin-LL37 and to assess any impacts on osteogenic activity. Furthermore, we attempted to demonstrate the feasibility of LL37 as a potential strategy in the reconstruction of clinical bone defects. Human adipose-derived mesenchyme stem cells (hADSCs) were cultured with different concentrations of LL37 and the optimum concentration for osteogenesis was selected for further in vitro studies. We then evaluated the antibiotic properties of LL37 at the optimum osteogenic concentration. Finally, we estimated the efficiency of a PSeD/hADSCs/LL37 combined scaffold on reconstructing bone defects in the rat calvarial defect model. The osteogenic ability on hADSCs in vitro was shown to be dependent on the concentration of LL37 and reached a peak at 4 μg/ml. The optimum concentration of LL37 showed good antimicrobial properties against Escherichia coli and Staphylococcus anurans. The combination scaffold of PSeD/hADSCs/LL37 showed superior osteogenic properties compared to the PSeD/hADSCs, PSeD, and control groups scaffolds, indicating a strong bone reconstruction effect in the rat calvarial bone defect model. In Conclusion, LL37 was shown to promote osteogenic differentiation in vitro as well as antibacterial properties. The combination of PSeD/hADSCs/LL37 was advantageous in the rat calvarial defect reconstruction model, showing high potential in clinical bone regeneration.

Performance of Nano-Hydroxyapatite/Beta-Tricalcium Phosphate and Xenogenic Hydroxyapatite on Bone Regeneration in Rat Calvarial Defects: Histomorphometric, Immunohistochemical and Ultrastructural Analysis.

BackgroundSynthetic biomaterials have played an increasingly prominent role in the substitution of naturally derived biomaterials in current surgery practice. In vitro and in vivo characterization studies of new synthetic biomaterials are essential to analyze their physicochemical properties and the underlying mechanisms associated with the modulation of the inflammatory process and bone healing.PurposeThis study compares the in vivo tissue behavior of a synthetic biomaterial nano-hydroxyapatite/beta-tricalcium phosphate (nano-HA/ß-TCP mixture) and deproteinized bovine bone mineral (DBBM) in a rat calvarial defect model. The innovation of this work is in the comparative analysis of the effect of new synthetic and commercially xenogenic biomaterials on the inflammatory response, bone matrix gain, and stimulation of osteoclastogenesis and osteoblastogenesis.MethodsBoth biomaterials were inserted in rat defects. The animals were divided into three groups, in which calvarial defects were filled with xenogenic biomaterials (group 1) and synthetic biomaterials (group 2), or left unfilled (group 3, controls). Sixty days after calvarial bone defects filled with biomaterials, periodic acid Schiff (PAS) and Masson’s trichrome staining, immunohistochemistry tumor necrosis factor-alpha (TNF-α), matrix metalloproteinase-9 (MMP-9), and electron microscopy analyses were conducted.ResultsHistomorphometric analysis revealed powerful effects such as a higher amount of proteinaceous matrix and higher levels of TNF-α and MMP-9 in bone defects treated with alloplastic nano-HA/ß-TCP mixture than xenogenicxenogic biomaterial, as well as collagen-proteinaceous material in association with hydroxyapatite crystalloids.ConclusionThese data indicate that the synthetic nano-HA/ß-TCP mixture enhanced bone formation/remodeling in rat calvarial bone defects. The nano-HA/ß-TCP did not present risks of cross-infection/disease transmission. The synthetic nano-hydroxyapatite/beta-tricalcium phosphate mixture presented adequate properties for guided bone regeneration and guided tissue regeneration for dental surgical procedures.