Rat Bone Marrow Mesenchymal Stem Research Articles

Microwave assisted black phosphorus-based core-shell composites with synergistic antibacterial and osteogenic ability for bone tissue repair

In clinics, repairing bone tissue with methicillin-resistant Staphylococcus aureus (MRSA) infections and bone defects remains a remarkable challenge. This study designs new core-shell composites of PMP/PVA (Fe3O4@APNs based on magnesium phosphate cement/Fe3O4@APNs-VAN-PLGA microspheres-agarose hydrogel). With Fe3O4@APNs (Phytic acid dodecasodium exfoliated BPNs (APNs) modified with Fe3O4) as an enhanced microwave (MW) sensitizer, the PMP/PVA system exhibits outstanding MW thermal performance. Under MW irradiation, the PMP/PVA exerts dual antibacterial activity through the MW thermal effect (MTE, quickly increased to 68.7 ± 2.4 °C in 5 min at 2.45 GHz, 10 W/cm2) and MW-triggered chemotherapy (CTH, in vitro: 99.98 ± 0.02 % (MRSA), 99.43 ± 0.73 % (E. coli); in vivo: 99.98 ± 0.02 %), which possesses antibacterial ability in vitro and anti-infective effects in vivo with low toxicity and side effects. In addition, PMP/PVA possesses biodegradability with Ca2+, Mg2+, and PO43− released, which not only facilitates the proliferation and osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSC) in vitro but also promotes new bone formation for bone defect sites with chronic osteomyelitis in vivo (the implantations were gradually replaced with a large area of new bone without apparent cortical reactions). Therefore, PMP/PVA with dual antibacterial activity, osteogenic performance, and low toxicity ability can potentially repair bone tissue with MRSA infections and refractory bone defects. The proposed system is promising for bone tissue repair of chronic osteomyelitis with bone defects.

A comparative study of 3D-printed scaffolds fabricated from different hydroxyapatite sources for bone tissue engineering applications

As a naturally occurring mineral component of bone, hydroxyapatite (HA) is a preferred bone-repair material in clinical medicine. This adaptable biomaterial is developed from synthetic or biological sources. The goal of this study was to investigate the physicochemical and biological properties of scaffolds made from diverse hydroxyapatite sources. We prepared hydroxyapatite powders either from naturally occurring sources, using decellularized bone extracellular matrix (DBECM) and deproteinized bovine bone (DBB), or in the laboratory using the co-precipitation method. Although XRD analysis confirmed the pure phase of HA in all three powders, XRF data found some other trace elements in bone-derived biomaterials, such as magnesium and strontium. Further, FTIR spectra showed DBECM-associated macromolecule peaks. In the second phase of this study, the particles were mixed with sodium alginate to produce bioink for 3D printing via extrusion. SEM photographs of the printed scaffolds showed a grid-like porous structure with large, interconnected pores. Although all of the scaffolds retained their structural integrity after 28 days submerged in the culture medium, DBECM-based scaffolds degraded the most. The test of Young’s modulus and compressive strength of scaffolds revealed that all scaffolds are strong enough to be employed in non-weight-bearing applications. The biological characteristics of the scaffolds were then evaluated via cytotoxicity analysis, SEM examination of cell attachment, MTT assay, ALP activity assessment, immunofluorescence staining, and Alizarin red staining. The results indicated that all three scaffolds provided a surface that promoted adhesion and proliferation of rat bone marrow mesenchymal stem cells (rMSCs), as well as stimulated the production of mineralized extracellular matrices. Additionally, our findings showed that scaffolds made from DBECM powders offer the best environment for cell activity. This is most likely due to the presence of trace elements and protein macromolecules in DBECM powders that are not found in DBB and synthetic HA. In conclusion, our comparative study revealed that while all three scaffolds are suitable for bone tissue engineering, DBECM-based scaffolds outperform DBB and synthetic HA.

A Composite Hydrogel Functionalized by Borosilicate Bioactive Glasses and VEGF for Critical-Size Bone Regeneration.

Critical-size bone defects pose a formidable challenge in clinical treatment, prompting extensive research efforts to address this problem. In this study, an inorganic-organic multifunctional composite hydrogel denoted as PLG-g-TA/VEGF/Sr-BGNPs is developed, engineered for the synergistic management of bone defects. The composite hydrogel demonstrated the capacity for mineralization, hydroxyapatite formation, and gradual release of essential functional ions and vascular endothelial growth factor (VEGF) and also maintained an alkaline microenvironment. The composite hydrogel promoted the proliferation and osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs), as indicated by increased expression of osteogenesis-related genes and proteins in vitro. Moreover, the composite hydrogel significantly enhanced the tube-forming capability of human umbilical vein endothelial cells (HUVECs) and effectively inhibited the process of osteoblastic differentiation of nuclear factor kappa-B ligand (RANKL)-induced Raw264.7 cells and osteoclast bone resorption. After the implantation of the composite hydrogel into rat cranial bone defects, the expression of osteogenic and angiogenic biomarkers increased, substantiating its efficacy in promoting bone defect repair in vivo. The commendable attributes of the multifunctional composite hydrogel underscore its pivotal role in expediting hydrogel-associated bone growth and repairing critical bone defects, positioning it as a promising adjuvant therapy candidate for large-segment bone defects.

IGF-1 Induces Osteogenic Differentiation of Rat Bone Marrow Mesenchymal Stem Cells by Promoting SOX4 via the MAPK/ERK Pathway.

Tissue engineering envisions functional substitute creation for damaged tissues. Insulin-like growth factor-1 (IGF-1) plays roles in bone marrow mesenchymal stem cell (BMSC) osteogenic differentiation (OD), and we investigated its specific mechanism. BMSCs were cultured and OD was induced. Surface antigens (CD105, CD90, CD44, CD45, CD34) were identified by flow cytometry. Adipogenic, chondrogenic, and osteogenic differentiation abilities of BMSCs were observed. BMSCs were cultured in osteogenic medium containing 80 ng/mL IGF-1 for 3 weeks. Alkaline phosphatase activity, calcification level, osteogenic factor (runt related protein 2 [RUNX2], osteocalcin [OCN], osterix [OSX]), total (t-) ERK1/2 and phosphorylated- (p-) ERK1/2 levels, and SRY-related high-mobility-group box 4 (SOX4) levels were assessed by alkaline phosphatase staining and Alizarin Red staining, Western blot, and reverse transcription-quantitative polymerase chain reaction. The mitogen-activated protein kinase/extracellular signal-regulated kinase (MAPK/ERK) pathway inhibitor (PD98059) was used to inhibit the MAPK/ERK pathway in IGF-1-treated BMSCs. Small interfering-SOX4 was transfected into BMSCs to down-regulate SOX4. IGF-1 increased alkaline phosphatase activity, cell calcification, and osteogenic factor (RUNX2, OCN, OSX) levels in BMSCs, indicating that IGF-1 induced rat BMSC OD. SOX4, and p-ERK1/2 and t-ERK1/2 levels were elevated in IGF-1-induced BMSCs, which were annulled by PD98059. PD98059 partly averted IGF-1-induced rat BMSC OD. SOX4 levels, alkaline phosphatase activity, cell calcification, and osteogenic factor (RUNX2, OCN, OSX) levels were reduced after SOX4 down-regulation, showing that downregulation of SOX4 averted the effect of IGF-1 on inducing rat BMSC OD. IGF-1 induced rat BMSC OD by stimulating SOX4 via the MAPK/ERK pathway.

S100 calcium‑binding protein A16 suppresses the osteogenic differentiation of rat bone marrow mesenchymal stem cells by inhibiting SMAD family member 4 signaling.

Osteogenesis is a complex process of bone formation regulated by various factors, yet its underlying molecular mechanisms remain incompletely understood. The present study aimed to investigate the role of S100A16, a novel member of the S100 protein family, in the osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) and uncover a novel Smad4-mitogen-activated protein kinase (MAPK)/Jun N-terminal kinase (JNK) signaling axis. In the present study, the expression level of S100A16 in bone tissues and BMSCs from ovariectomized rats was evaluated and then the impact of S100A16 silencing on osteogenic differentiation was examined. Increased S100A16 expression was observed in bone tissues and BMSCs from ovariectomized rats, and S100A16 silencing promoted osteogenic differentiation. Further transcriptomic sequencing revealed that the Smad4 pathway was involved in S100A16 silencing-induced osteogenesis. The results of western blot analysis revealed that S100A16 overexpression not only downregulated Smad4 but also activated MAPK/JNK signaling, which was validated by treatment with MAPK and JNK inhibitors U0126 and SP600125. Overall, in the present study, the novel regulatory factors influencing osteogenic differentiation were elucidated and mechanistic insights that could aid in the development of targeted therapeutic strategies for patients with osteoporosis were provided.

Plasma bias homopolar sputtering technology and its application to enhance bioactivity of polyetheretherketone surface

Numerous strategies have been developed to deposit metal-based films on biomedical implants to improve their performances. As a promising strategy, vacuum plasma plating technology can introduce many bioactive metals on the implant surface and achieve strong interfacial bonding. However, there are still limitations in the surface modification of a non-conductive matrix. Here, a simple and universal plasma-based technique termed plasma bias homopolar sputtering (PBHS) was presented to modify the insulating and conductive materials. The technical principles and characteristics of PBHS were comprehensively studied. As a demonstration, the Fe-based film was prepared on the surface of an insulating polyetheretherketone (PEEK) by PBHS to improve its biological performance. The as-prepared Fe-based film exhibited low elasticity modulus and good hydrophilicity, enhancing the adhesion, proliferation, and osteogenic differentiation of rat bone marrow mesenchymal stem cells. This work provides a simple and universal technique for the preparation of metal-based films, holding great potential for the surface modification of biomedical implants.

Construction of an acellular spinal cord scaffold with a novel NT-3 sustained-release system promotes the neural differentiation of BMSCs through the NT-3/TrkC pathway

In previous neural tissue engineering studies, we successfully constructed NT-3 cross-linked acellular spinal cord scaffolds (NT-3 cross-linked scaffolds), which can sustain the release of NT-3 and promote the differentiation of rat bone marrow mesenchymal stem cells (BMSCs) into neuron-like cells. However, the molecular mechanism by which NT-3 cross-linked scaffolds promote BMSC differentiation into neurons is unknown, coupled with the low drug loading of scaffolds and the sudden release of NT-3 on the first day. We used WB and PCR in combination with NT-3/TrkC, MAPK/ERK, and PI3K/Akt pathway inhibitors to determine the mechanism of action in vitro. We hypothesized that NT-3 mediates the NT-3/TrkC pathway as a major target molecule that promotes the differentiation of BMSCs into neurons. We prepared an improved NT-3 scaffold and improve the sustained release of NT-3 through the combination of heparin methacryloyl and EDC/NHS. The adhesion, proliferation, differentiation, and NT-3/TrkC signaling pathway of BMSCs on different scaffolds were analyzed. We concluded that NT-3-improved scaffolds can be loaded with more NT-3 and more effectively promote the differentiation of BMSCs into neurons through the NT-3/TrkC pathway. The proposed method has biocompatibility and provides a new idea for spinal cord repair.

Dimethyloxallyl glycine-loaded mesoporous bioactive glass/poly(D,L-lactide) composite scaffolds with ultrasound stimulation for promoting bone repair.

Introduction: Bone tissue engineering is considered the ideal approach for bone repair. Mesoporous bioactive glass (MBG) possesses the characteristics of high drug-loading capacity and bioactivity. Low-intensity pulsed ultrasound contributes to promoting fracture healing and bone defect repair, and dimethyloxalyl glycine (DMOG) is a small molecular inhibitor that can suppress prolyl hydroxylase, reducing the degradation of hypoxia-inducible factor. Methods: In this study, we proposed to prepare DMOG-loaded MBG/poly(D,L-lactide) composite scaffolds (DMOG-MBG/PDLLA) for promoting bone repair. The effects of ultrasound stimulation and DMOG release on the cell responses of rat bone marrow mesenchymal stem cells (BMSCs) and human umbilical vein endothelial cells (HUVECs) and bone repair in vivo were investigated. Results and Discussion: The results showed that both ultrasound stimulation and DMOG release could promote the proliferation, adhesion and differentiation of BMSCs and HUVECs, respectively. After the implantation of scaffolds in rat cranial bone defect model for 8 weeks, the results indicated that the combined ultrasound stimulation and DMOG release contributed to the highest ability for promoting bone repair. Hence, the DMOG-MBG/PDLLA scaffolds with ultrasound stimulation are promising for application in bone repair.

Osteogenesis or Apoptosis-Twofold Effects of Zn2+ on Bone Marrow Mesenchymal Stem Cells: An In Vitro and In Vivo Study.

Zinc (Zn) is a bioabsorbable metal that shows great potential as an implant material for orthopedic applications. Suitable concentrations of zinc ions promote osteogenesis, while excess zinc ions cause apoptosis. As a result, the conflicting impacts of Zn2+ concentration on osteogenesis could prove to be significant problems for the creation of novel materials. This study thoroughly examined the cell viability, proliferation, and osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) cultured in various concentrations of Zn2+ in vitro and validated the osteogenesis effects of zinc implantation in vivo. The effective promotion of cell survival, proliferation, migration, and osteogenic differentiation of bone marrow mesenchymal stem cell (BMSCs) may be achieved at a low concentration of Zn2+ (125 μM). The excessively high concentration of zinc ions (>250 μM) not only reduces BMSCs' viability and proliferation but also causes them to suffer apoptosis due to the disturbed zinc homeostasis and excessive Zn2+. Moreover, transcriptome sequencing was used to examine the underlying mechanisms of zinc-induced osteogenic differentiation with particular attention paid to the PI3K-AKT and TGF-β pathways. The present investigation elucidated the dual impacts of Zn2+ microenvironments on the osteogenic characteristics of rBMSCs and the associated processes and might offer significant insights for refining the blueprint for zinc-based biomaterials.

Enhanced Osteogenic Activity and Antibacterial Properties of Graphene Oxide-Poly(Lactic Acid) Films for the Repair of Cranial Defects in Rats

The failure of bone defect repair caused by bacterial infection is a significant clinical challenge. However, the currently utilized bone graft materials lack antibacterial properties, necessitating the development of bone repair materials with both osteoinductive and antibacterial capabilities. Graphene oxide (GO) has garnered considerable attention due to its distinctive physical, chemical, and biological characteristics. In this study, we prepared a graphene oxide-poly(lactic acid) (GO-PLA) film with exceptional biological properties. In vitro investigations demonstrated that the GO-PLA film substantially enhanced the adhesion and proliferation capacity of rat bone marrow mesenchymal stem cells (rBMSCs). Furthermore, we observed augmented alkaline phosphatase activity as well as increased expression levels of osteogenic genes in rBMSCs cultured on the GO-PLA film. Additionally, we evaluated the antibacterial activity of our samples using gram-positive Streptococcus mutans (Sm) and gram-negative Actinobacillus actinomycetemcomitans (Aa). Our findings revealed that GO doping significantly inhibited bacterial growth. Moreover, implantation experiments conducted on rat skull defects demonstrated excellent guided bone regeneration performance exhibited by the GO-PLA film. Overall, our results indicate that the GO-PLA film possesses outstanding osteogenic and antibacterial properties, making it a promising biomaterial for bone tissue regeneration.

The Protective Effect of Crocin on Rat Bone Marrow Mesenchymal Stem Cells Exposed to Aluminum Chloride as an Endocrine Disruptor.

Mesenchymal Stem Cells (MSCs) have the ability to self-renew and proliferate which gives them healing properties in various tissues. Aluminium chloride (AlCl3) is a chemical compound with harmful effects on health; oxidative stress caused by Aluminium has been reported previously. Crocin, a major component of Crocus sativus (saffron), has antioxidant properties and has shown therapeutic potential. Researchers have been looking for ways to reduce the harmful effects of AlCl3. To investigate whether crocin can reduce AlCl3 cytotoxicity, rat Bone Marrow Mesenchymal Stem Cells (BM-MSCs) were isolated, cultured and divided into four experimental groups. The first group was the control, which was untreated cells. The second and third groups were treated with crocin (50, 100, 250, 500 μM) and AlCl3 (20, 25, 30 mM) for 24 hr. The fourth group was pre-treated with crocin (250, 500 μM) for 24 hr and then treated with AlCl3 (20 mM) overnight. Cytotoxicity was assessed using the MTT assay. Mineralization was evaluated by alizarin red staining. Sox-2 and E-cadherin expression were measured using real-time PCR. The results showed that AlCl3 caused cytotoxicity on BM-MSCs and decreased the mRNA expression of Sox-2 and E-cadherin, which are important for the maintenance of self-renewal and proliferation of BM-MSCs. In contrast, crocin protected the self-renewal characteristic of BM-MSCs by increasing Sox-2 expression and also preserved the proliferative effects on BM-MSCs by upregulating E-cadherin expression (***p≤0.001). Overall, the study suggests that crocin can protect BM-MSCs from AlCl3-induced cytotoxicity by upregulate Sox-2 expression and E-cadherin expression. This suggests that crocin may be a potential therapeutic agent for the treatment of AlCl3-induced toxicity.

3D-printed piezoelectric scaffolds composed of uniform core-shell structured BaTiO3@ bioactive glasses particles for bone regeneration

The piezoelectric property and biocompatibility of barium titanate (BTO) is exceptional, whereas its biological activity is limited. Bioactive glasses (BG) are widely recognized for osteoinductive bioactivities. Hence, it is meaningful to explore the reasonable design of BTO and BG combinations to achieve bioactive piezoelectric tissue engineering scaffolds that mimic natural bone. In this study, homogeneous core-shell particles of BTO wrapped in BG layer were firstly fabricated via a sol-gel process. Various BG weight ratios (5 wt%, 10 wt%, and 15 wt%) in BTO@BG particles have been able to achieve the shell thickness in the range of 4 nm–16 nm. Furthermore, the composite particles were three-dimensionally printed into porous scaffolds through gas extrusion using polyvinyl pyrrolidone as binders. The composite scaffolds have been extensively characterized with respect to their physical and functional properties. Desirable piezoelectric scaffolds (BTO@15BG-S) with compressive strength at ∼66 MPa, and piezoelectric constant (d33) of ∼1.1 pC/N were obtained after sintering and polarization. Our findings indicated that higher sintering temperatures led to denser scaffolds with reduced porosity, increased compressive strength and higher d33 constant. Additionally, an increase in the amount of BG coating promoted scaffold calcination via melt filling in pores, while reduced the piezoelectric constant d33. Among all scaffolds, BTO@15BG-S exhibited superior ability to induce apatite formation when sintered at 1250 °C and soaked in simulated body fluid for 7 days. In vitro culture rat bone marrow mesenchymal stem cells (rBMSCs) and cellular assessments confirmed that polarized piezoelectric ceramic scaffolds could effectively enhance cell adhesion, proliferation, and osteogenic differentiation compared to unpolarized scaffolds. An increase in BG coating amount enhanced the capacity of piezoelectric ceramic scaffolds to upgrade osteogenesis activities of rBMSCs. These results rendered BTO@BG-S composite scaffolds promising candidate in the field of bone repair.

Exploring the Osteogenic Potential of Zinc-Doped Magnesium Phosphate Cement (ZMPC): A Novel Material for Orthopedic Bone Defect Repair.

In orthopedics, the repair of bone defects remains challenging. In previous research reports, magnesium phosphate cements (MPCs) were widely used because of their excellent mechanical properties, which have been widely used in the field of orthopedic medicine. We built a new k-struvite (MPC) cement obtained from zinc oxide (ZnO) and assessed its osteogenic properties. Zinc-doped magnesium phosphate cement (ZMPC) is a novel material with good biocompatibility and degradability. This article summarizes the preparation method, physicochemical properties, and biological properties of ZMPC through research on this material. The results show that ZMPC has the same strength and toughness (25.3 ± 1.73 MPa to 20.18 ± 2.11 MPa), that meet the requirements of bone repair. Furthermore, the material can gradually degrade (12.27% ± 1.11% in 28 days) and promote osteogenic differentiation (relative protein expression level increased 2-3 times) of rat bone marrow mesenchymal stem cells (rBMSCs) in vitro. In addition, in vivo confirmation revealed increased bone regeneration in a rat calvarial defect model compared with MPC alone. Therefore, ZMPC has broad application prospects and is expected to be an important repair material in the field of orthopedic medicine.

Analysis of the Potential Angiogenic Mechanisms of BuShenHuoXue Decoction against Osteonecrosis of the Femoral Head Based on Network Pharmacology and Experimental Validation.

Osteonecrosis of the femoral head (ONFH) is a common orthopedic disease with a high disability rate. The clinical effect of BuShenHuoXue decoction (BSHX) for ONFH is satisfactory. We aimed to elucidate the potential angiogenic mechanisms of BSHX in a rat femoral osteonecrosis model and bone marrow mesenchymal stem cells (BMSCs). With in vivo experiments, we established the steroid-induced osteonecrosis of the femoral head (SONFH) model using Sprague-Dawley (SD) rats (8-week-old). The rats were randomly divided into five group of 12 rats each and given the corresponding interventions: control, model (gavaged with 0.9% saline), BSHX low-, medium- and high-dose groups (0.132 3, 0.264 6, and 0.529 2 g/mL BSHX solution by gavage). After 12 weeks, haematoxylin and eosin (H&E) staining was preformed to evaluate rat osteonecrosis. the expression of angiogenic factors (CD31, VEGFA, KDR, VWF) in rat femoral head was detected by immunohistochemistry, qPCR and western blotting. In cell experiment, BMSCs were isolated and cultured in the femoral bone marrow cavity of 4-week-old SD rats. BMSCs were randomly divided into eight groups and intervened with different doses of BSHX-containing serum and glucocorticoids: control group (CG); BSHX low-, medium-, and high-dose groups (CG + 0.661 5, 1.323, and 2.646 g/kg BSHX gavage rat serum); dexamethasone (Dex) group; and Dex + BSHX low-, medium-, and high-dose groups (Dex + 0.661 5, 1.323, and 2.646 g/kg BSHX gavaged rat serum), the effects of BSHX-containing serum on the angiogenic capacity of BMSCs were examined by qPCR and Western blotting. A co-culture system of rat aortic endothelial cells (RAOECs) and BMSCs was then established. Migration and angiogenesis of RAOECs were observed using angiogenesis and transwell assay. Identification of potential targets of BSHX against ONFH was obtained using network pharmacology. BSHX upregulated the expression of CD31, VEGFA, KDR, and VWF in rat femoral head samples and BMSCs (p < 0.05, vs. control group or model group). Different concentrations of BSHX-containing serum significantly ameliorated the inhibition of CD31, VEGFA, KDR and VWF expression by high concentrations of Dex. BSHX-containing serum-induced BMSCs promoted the migration and angiogenesis of RAOECs, reversed to some extent the adverse effect of Dex on microangiogenesis in RAOECs, and increased the number of microangiogenic vessels. Furthermore, we identified VEGFA, COL1A1, COL3A1, and SPP1 as important targets of BSHX against ONFH. BSHX upregulated the expression of angiogenic factors in the femoral head tissue of ONFH model rats and promoted the angiogenic capacity of rat RAOECs and BMSCs. This study provides an important basis for the use of BSHX for ONFH prevention and treatment.

A comprehensive stem cell laboratory module with blended learning for medical students at Tongji University.

The laboratory practice "Primary culture and directional differentiation of rat bone marrow mesenchymal stem cells (BMSCs)" is part of a required course for sophomore medical students at Tongji university, which has been conducted since 2012. Blended learning has been widely applied in medical courses. Based on a student-centered teaching philosophy, we reconstructed a comprehensive stem cell laboratory module with blended learning in 2021, aiming to facilitate students in enhancing their understanding of the multi-lineage differentiation potential of stem cells and improve their experimental skills, self-directed learning ability, and innovative thinking. First, we constructed in-depth online study resources, including videos demonstrating laboratory procedures, a PowerPoint slide deck, and published literature on student self-learning before class. In class, students performed a primary culture of BMSCs, freely chose among adipogenic, osteogenic, or chondrogenic differentiation, and used cytochemical or immunofluorescence staining for identification. After class, the extracurricular part involved performing quantitative polymerase chain reaction to examine the expression of multi-lineage differentiation marker genes, which was designed as an elective. After 2 years of practice, positive feedback was obtained from both students and faculty members who achieved, the learning goal as expected. The reconstructed stem cell laboratory module provides comprehensive practice opportunities for students. Students have a better understanding of BMSC at the molecular, cellular, and functional levels and have improved their experimental skills, which forms a basis for scientific research for medical students. Introducing blended learning into other medical laboratory practices thus seems valuable.

Fibromodulin facilitates the osteogenic effect of Masquelet's induced membrane by inhibiting the TGF-β/SMAD signaling pathway.

Masquelet's induced membrane (IM) technique is a promising treatment strategy for the repair of substantial bone defects. The formation of an IM around polymethylmethacrylate bone cement plays a crucial role in this technique. Several studies have indicated that IMs have bioactivity because they contain abundant blood vessels, a variety of cells, and biological factors. The bioactivity of an IM increases during the initial stages of formation, thereby facilitating bone regeneration and remodeling. Nevertheless, the precise mechanisms underlying the enhancement of IM bioactivity and the promotion of bone regeneration necessitate further investigation. In this study, we successfully developed a Masquelet IM model of critical femur defects in rats. By employing proteomics analysis and biological detection techniques, we identified fibromodulin (FMOD) as a pivotal factor contributing to angiogenesis and the enhanced bioactivity of the IM. A significant increase in angiogenesis and the expression of bioactive factors in the IM was also observed with the upregulation of FMOD expression. Furthermore, this effect is mediated through the inhibition of the transforming growth factor beta (TGF-β)/SMAD signaling pathway. We also demonstrated that administering recombinant human FMOD enhanced osteogenesis in rat bone marrow mesenchymal stem cells and angiogenesis in human umbilical vein endothelial cells in vitro. Furthermore, the negative regulatory effect of the TGF-β signaling pathway was verified. In conclusion, this study provides a novel theoretical basis for the application of IMs in bone-defect reconstruction and explores possible new mechanisms that may play an important role in promoting the bioactivity and osteogenic potential of IMs.

Static magnetic field enhances the bone remodelling capacity of human demineralized bone matrix in a rat animal model of cranial bone defects.

The regeneration of bone defects that exceed 2 cm is a challenge for the human body, necessitating interventional therapies. Demineralized bone matrices (DBM) derived from biological tissues have been employed for bone regeneration and possess notable osteoinductive and osteoconductive characteristics. Nevertheless, their efficiency in regenerating critically sized injuries is limited, and therefore additional signaling cues are required. Thanks to the piezoelectric properties of the bone, external physical stimulation is shown to accelerate tissue healing. We have implanted human DBM in critically sized cranial bone defects in rat animal models and exposed them to an external magnetic field (1 T) to enhance endogenous bone formation. Our in vitro experiments showed the superior cytocompatibility of DBM compared to cell culture plates. Furthermore, alkaline phosphatase activity after 14 days and Alizarin red staining at 28 days demonstrated differentiation of rat bone marrow mesenchymal stem cells into bone lineage on DBM. Computer tomography images together with histological analyses showed that implanting DBM in the injured rats significantly enhanced bone regeneration. Notably, combining DBM transplantation with a 2 h daily exposure to a 1 T magnetic field for 2 weeks (day 7 to 21 post-surgery) significantly improved bone regeneration compared to DBM transplantation alone. This research indicates that utilizing external magnetic stimulation significantly enhances the potential of bone allografts to regenerate critically sized bone defects.

Effect of Er:YAG Pulsed Laser-Deposited Hydroxyapatite Film on Titanium Implants on M2 Macrophage Polarization In Vitro and Osteogenesis In Vivo.

In a previous study, we successfully coated hydroxyapatite (HAp) onto titanium (Ti) plates using the erbium-doped yttrium aluminum garnet pulsed-laser deposition (Er:YAG-PLD) method. In this study, we performed further experiments to validate the in vitro osteogenic properties, macrophage polarization, and in vivo osseointegration activity of HAp-coated Ti (HAp-Ti) plates and screws. Briefly, we coated a HAp film onto the surfaces of Ti plates and screws via Er:YAG-PLD. The surface morphological, elemental, and crystallographic analyses confirmed the successful surface coating. The macrophage polarization and osteogenic induction were evaluated in macrophages and rat bone marrow mesenchymal stem cells, and the in vivo osteogenic properties were studied. The results showed that needle-shaped nano-HAp promoted the early expression of osteogenic and immunogenic genes in the macrophages and induced excellent M2 polarization properties. The calcium deposition and osteocalcin production were significantly higher in the HAp-Ti than in the uncoated Ti. The implantation into rat femurs revealed that the HAp-coated materials had superior osteoinductive and osseointegration activities compared with the Ti, as assessed by microcomputed tomography and histology. Thus, HAp film on sandblasted Ti plates and screws via Er:YAG-PLD enhances hard-tissue differentiation, macrophage polarization, and new bone formation in tissues surrounding implants both in vitro and in vivo.

Glucocorticoids promote steroid-induced osteonecrosis of the femoral head by down-regulating serum alpha-2-macroglobulin to induce oxidative stress and facilitate SIRT2-mediated BMP2 deacetylation

Our study investigated the possible molecular mechanism of glucocorticoid in steroid-induced osteonecrosis of the femoral head (SINFH) through regulating serum alpha-2-macroglobulin and SIRT2-mediated BMP2 deacetylation. Essential genes involved in glucocorticoid-induced SINFH were screened by transcriptome sequencing and analyzed by bioinformatics, followed by identifying downstream regulatory targets. Rat bone marrow mesenchymal stem cells were isolated and treated with methylprednisolone (MP) for in vitro cell experiments. Besides, a glucocorticoid-induced rat ONFH was established using the treatment of MP and LPS. ChIP-PCR detected the enrichment of SIRT2 in the promoter region of BMP2, and the deacetylation modification of SIRT2 on BMP2 was determined. Bioinformatics analysis revealed that glucocorticoids may induce ONFH through the SIRT2/BMP2 axis. In vitro cell experiments showed that glucocorticoids up-regulated SIRT2 expression in BMSCs by inducing oxidative stress, thereby promoting cell apoptosis. The up-regulation of SIRT2 expression may be due to the decreased ability of α2 macroglobulin to inhibit oxidative stress, and the addition of NOX protein inhibitor DPI could significantly inhibit SIRT2 expression. SIRT2 could promote histone deacetylation of the BMP2 promoter and inhibit its expression. In vitro cell experiments further indicated that knocking down SIRT2 could protect BMSC from oxidative stress and cell apoptosis induced by glucocorticoids by promoting BMP2 expression. In addition, animal experiments conducted also demonstrated that the knockdown of SIRT2 could improve glucocorticoid-induced ONFH through up-regulating BMP2 expression. Glucocorticoids could induce oxidative stress by down-regulating serum α2M to promote SIRT2-mediated BMP2 deacetylation, leading to ONFH.

Effects of using collagen and aloe vera grafted fibroin scaffolds on osteogenic differentiation of rat bone marrow mesenchymal stem cells in SBF-enriched cell culture medium

In the study, collagen and aloe vera were grafted onto silk fibroin with two different methods, and 3D-microporous scaffolds (1F5C4A1 and 2F5C4A1) were formed by lyophilization. Three osteogenic cultures were started by seeding rat bone marrow mesenchymal stem cells (MSCs) and pre-induced MSC (osteoblast (OB)) on biopolymeric scaffolds. The osteogenic medium was enriched with 10% (v/v) simulated body fluid (SBF) to promote mineralization and osteogenic differentiation in one of the MSC cultures and the OB culture. X-ray diffraction (XRD), scanning electron microscopy (SEM), scanning electron microscopy- energy dispersive spectrum (SEM-EDS) analyses on cellular samples and histochemical (alizarin red, safranin-O, alcian blue) and immunohistochemical (anti-collagen-1, anti-osteocalcin, anti-osteopontin) staining showed that bone-like mineralization was occurred by both chemically and cellular activity. In addition, pre-osteogenic induction of MSCs in 2D-cultured was found to promote osteogenesis more rapidly when started 3D-cultured. These results indicated that enrichment of the cell culture medium with SBF is sufficient for in vitro mineralization rather than using high concentrations of SBF. The findings showed that OB cells on the 2F5C4A1 scaffold obtained the best osteogenic activity. Still, other culture media with 10% SBF content could be used for bone tissue engineering under osteogenic induction.