A geographic information system (GIS) raster technique has been developed and used interactively with remediation designers to evaluate the optimum extent of excavating soil contaminated by chlorinated solvents. The technique and the results of its application are presented. The site was a former chemical storage plant for acids and solvents. Two distinct solvent plumes were detected within the ground using a photo-ionisation detector. The solvents were found to be dissolved in the groundwater and migrating in the general direction of groundwater flow. A remediation strategy was proposed involving the localised excavation of contamination ‘hot spots’ followed by the implementation of a groundwater remediation system. A number of excavation options were discussed and the GIS raster technique was developed to evaluate these options in terms of contaminant removed and excavation cost. The plumes were initially mapped using a triangular irregular network (TIN). These TIN models were rasterised to produce a regular grid of rectangular cells, each cell having a value relating to the concentration of contaminant at that spatial point. The proposed excavation zones were then overlaid on to the raster models as masks. The relationship between the value of contaminant concentration of cells within the mask (or excavation zone) and the total value of contaminant concentration of cells within the solvent plume was used to determine the efficiency of the excavation. The excavation options were compared taking into account the percentage of the contaminant plume removed, the excavation area (soil volumes) and related costs. Once the GIS raster technique had been developed, it proved very quick to rerun the analysis for the other excavation zones. The optimum excavation zone, based upon cost and contaminant recovery, was found for the site. The technique helped by targeting the worst area of contamination and provided the client with a cost-benefit analysis of the different remediation options.