Magnesium-rare Earth Alloys Research Articles

Prediction of Mechanical Properties of Rare-Earth Magnesium Alloys Based on Convolutional Neural Networks.

Rare-earth magnesium alloys exhibit higher comprehensive mechanical properties compared to other series of magnesium alloys, effectively expanding their applications in aerospace, weapons, and other fields. In this work, the tensile strength, yield strength, and elongation of a Mg-Gd-Y-Zn-Zr rare-earth magnesium alloy under different process conditions were determined, and a large number of microstructure observations and analyses were carried out for the tensile specimens; a prediction model of the corresponding mechanical properties was established by using a convolutional neural network (CNN), in which the metallographic diagram of the rare-earth magnesium alloy was taken as the input, and the corresponding tensile strength, yield strength, elongation, and three mechanical properties were taken as the output. The stochastic gradient descent (SGD) algorithm was used for parameter optimization and experimental validation, and the results showed that the average relative errors of the tensile strength and yield strength prediction results were 1.90% and 3.14%, respectively, which were smaller than the expected error of 5%.

An investigation on tool performances in milling rare-earth magnesium alloys

An investigation on tool performances in milling rare-earth magnesium alloys

Implementation of Balanced Strength and Toughness of VW93A Rare-Earth Magnesium Alloy with Regulating the Overlapping Structure of Lamellar LPSO Phase and $$\beta^{\prime }$$ Phase

Implementation of Balanced Strength and Toughness of VW93A Rare-Earth Magnesium Alloy with Regulating the Overlapping Structure of Lamellar LPSO Phase and $$\beta^{\prime }$$ Phase

Unveiling mechanical response and deformation mechanism of extruded WE43 magnesium alloy under high-speed impact

To clarify the mechanical behavior and deformation mechanism of rare earth magnesium (Mg) alloy WE43 under extreme service loads, high-speed impact tests under various deformation temperatures and loading paths were conducted using a split Hopkinson pressure bar. The flow stress along extrusion direction (ED) and extrusion radial direction (ERD) decreases apparently with deformation temperature. Compared with conventional Mg alloys, it exhibits a slight anisotropy and an unusual C-shaped characteristic. Cellular dislocation, mechanical twin and fine grain that occur after high-speed impact deformation are insensitive to the loading direction, but strongly dependent on the deformation temperature, especially superimposed with adiabatic temperature rise. As a result, dynamic recrystallization (DRX) occurs even at an ambient temperature of 25 °C. Double twinning and prismatic slip or pyramidal slip are the dominant deformation mechanisms at 25 °C. These twins induce mechanical cutting refinement to form some fine-grained structures, accompanied by a small number of fine grains by twinning induced DRX. In contrast, the deformation at 250 °C is mainly controlled by prismatic slip and pyramidal slip, accompanied by various types of twinning in early deformation stage. Compared with 25 °C, more fine-grained microstructures are formed at 150 and 250 °C through a synergy mechanism of twinning induced mechanical cutting and twinning induced DRX.

Microstructure and Properties of Mg-Gd-Y-Zn-Mn High-Strength Alloy Welded by Friction Stir Welding.

Mg-Gd-Y-Zn-Mn (MVWZ842) is a kind of high rare earth magnesium alloy with high strength, high toughness and multi-scale strengthening mechanisms. After heat treatment, the maximum tensile strength of MVWZ842 alloy is more than 550 MPa, and the elongation is more than 5%. Because of its great mechanical properties, MVWZ842 has broad application potential in aerospace and rail transit. However, the addition of high rare earth elements makes the deformation resistance of MVWZ842 alloy increase to some extent. This leads to the difficulty of direct plastic processing forming and large structural part shaping. Friction stir welding (FSW) is a convenient fast solid-state joining technology. When FSW is used to weld MVWZ842 alloy, small workpieces can be joined into a large one to avoid the problem that large workpieces are difficult to form. In this work, a high-quality joint of MVWZ842 alloy was achieved by FSW. The microstructure and properties of this high-strength magnesium alloy after friction stir welding were studied. There was a prominent onion ring characteristic in the nugget zone. After the base was welded, the stacking fault structure precipitated in the grain. There were a lot of broken long period stacking order (LPSO) phases on the retreating side of the nugget zone, which brought the effect of precipitation strengthening. Nano-α-Mn and the broken second phase dispersed in the matrix in the nugget zone, which made the grains refine. A relatively complete dynamic recrystallization occurred in the nugget zone, and the grains were refined. The welding coefficient of the welded joint exceeded 95%, and the hardness of the weld nugget zone was higher than that of the base. There were a series of strengthening mechanisms in the joint, mainly fine grain strengthening, second phase strengthening and solid solution strengthening.

The role of zinc addition on the microstructural evolution and mechanical properties of wire-arc directed energy deposited Mg-Gd-Y-(Zn)-Zr alloys

Wire-arc directed energy deposition (WA-DED) demonstrates significant potential in the rapid and free forming of high-strength magnesium rare-earth (Mg-RE) alloys. This highlights a growing demand for tailored wire alloy compositions to promote engineering applications of this technology. In this work, the role of zinc addition on WA-DED processed Mg-Gd-Y based alloys has been thoroughly investigated by utilizing Mg-6Gd-3Y-0.5Zr (wt.%, GW63K) and Mg-6Gd-3Y-0.5Zn-0.5Zr (wt.%, GWZ631K) alloy wires as model materials. The microstructure evolution of these two alloys during deposition and heat treatment is revealed by multi-scale microstructure characterization techniques. The influences of Zn addition on mechanical properties of these deposited alloys are investigated comparatively. Obtained results indicate that addition of Zn element into Mg-Gd-Y based alloys promotes phase transformation between eutectic phases and long period stacking order (LPSO) phases during the WA-DED deposition process owing to the multiple thermal cycling. More importantly, the addition of Zn element increases the tendency of solidification shrinkage of the deposited metal. During high-temperature solid solution treatment, the presence of Zn is conducive to improving the thermal stability of the as-deposited grain boundaries and thus suppressing grain coarsening. After optimized T6 treatments, the strength of GW63K alloys increases to 374±7MPa, and is obviously higher than that (315±6MPa) of GWZ631K alloys. The addition of Zn element weakens the precipitation strengthening effect. This can be attributed to the formation of LPSO phases, which consumes a substantial amount of RE elements, and in turn decreases the density of aging precipitated nanoscale β´ phases. This work promotes the understanding of the non-equilibrium solidified microstructure evolution of multi-component Mg-RE alloys and guides the optimization of alloy composition of WA-DED specific wire materials.

Effect of unusual texture on tension-compression asymmetry for Mg-RE alloy by viscoplastic self-consistent modeling

The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields. In this study, the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression asymmetry was examined using optical microscope (OM), x-ray diffraction (XRD), viscoplastic self-consistent (VPSC) modeling, and electron backscatter diffraction (EBSD). The VPSC hardening parameters were significantly adjusted based on the Schmid factor of deformation modes in rare earth magnesium (Mg-RE) alloy, which came from the EBSD data. Excellent agreement was found between the modified VPSC model's calculation results, especially the stress-strain curves and pole figures. The alloy exhibited good strength with a negligible tension-compression asymmetry and an impressive 0.98 ratio of compressive yield strength to tensile yield strength (CYS/TYS). The main cause could be attributed to the unusual texture of (11-20) <0001> in alloy, which eliminated the imbalance in tension and compression deformation by having a negative effect on the activation of {10-12} twinning in tensile and a positive effect in compressive deformation. The activation level of {10-12} twinning was 0.37 and 0.40 calculated by VPSC model, in the plastic deformation of tension and compression, respectively; in the tensile and compression samples, the EBSD data indicated that approximately 31.9% and 31.1% (area proportion) of the grains were deformed with twins, respectively. Both tension and compression deformation showed the {10-12} twinning in the early stage of deformation, which transformed to {11-22} twinning in the later stage. The considerable activation of pyramidal <c+a> during the later stages of deformation endowed the alloy with good ductility.

Research Progress on the Oxidation Behavior of Ignition-Proof Magnesium Alloy and Its Effect on Flame Retardancy with Multi-Element Rare Earth Additions: A Review.

The phenomenon of high-temperature oxidation in magnesium alloys constitutes a significant obstacle to their application in the aerospace field. However, the incorporation of active elements such as alloys and rare earth elements into magnesium alloys alters the organization and properties of the oxide film, resulting in an enhancement of their antioxidation capabilities. This paper comprehensively reviews the impact of alloying elements, solubility, intermetallic compounds (second phase), and multiple rare earth elements on the antioxidation and flame-retardant effects of magnesium alloys. The research progress of flame-retardant magnesium alloys containing multiple rare earth elements is summarized from two aspects: the oxide film and the matrix structure. Additionally, the existing flame-retardancy models for magnesium alloys and the flame-retardant mechanisms of various flame-retardant elements are discussed. The results indicate that the oxidation of rare earth magnesium alloys is a complex process determined by internal properties such as the structure and properties of the oxide film, the type and amount of rare earth elements added, the proportion of multiple rare earth elements, synergistic element effects, as well as external properties like heat treatment, oxygen concentration, and partial pressure. Finally, some issues in the development of multi-rare earth magnesium alloys are raised and the potential directions for the future development of rare earth flame-retardant magnesium alloys are discussed. This paper aims to promote an understanding of the oxidation behavior of flame-retardant magnesium alloys and provide references for the development of rare earth flame-retardant magnesium alloys with excellent comprehensive performance.

Study of the Dynamic Recrystallization Behavior of Mg-Gd-Y-Zn-Zr Alloy Based on Experiments and Cellular Automaton Simulation

The exploration of the relationship between process parameters and grain evolution during the thermal deformation of rare-earth magnesium alloys using simulation software has significant implications for enhancing research and development efficiency and advancing the large-scale engineering application of high-performance rare-earth magnesium alloys. Through single-pass hot compression experiments, this study obtained high-temperature flow stress curves for rare-earth magnesium alloys, analyzing the variation patterns of these curves and the softening mechanism of the materials. Drawing on physical metallurgical theories, such as the evolution of dislocation density during dynamic recrystallization, recrystallization nucleation, and grain growth, the authors of this paper establish a cellular automaton model to simulate the dynamic recrystallization process by tracking the sole internal variable—the evolution of dislocation density within cells. This model was developed through the secondary development of the DEFORM-3D finite element software. The results indicate that the model established in this study accurately simulates the evolution process of grain growth during heat treatment and the dynamic recrystallization microstructure during the thermal deformation of rare-earth magnesium alloys. The simulated results align well with relevant theories and metallographic experimental results, enabling the simulation of the dynamic recrystallization microstructure and grain size prediction during the deformation process of rare-earth magnesium alloys.

Direct observation and characterization of a novel long period stacking ordered phase in GH4169 alloy

As is widely recognized, the Long Period Stacking Ordered (LPSO) phase is an important strengthening phase in the rare earth magnesium alloys. The LPSO phase not only enhances the strength of the alloy, but also improves its plasticity, thereby effectively addressing the strength-ductility trade-off phenomenon. Therefore, the preparation of metallic materials containing LPSO phase provides a new idea for designing a new generation of high-strength and high-toughness alloys. In present study, A novel nano-sized LPSO phase is observed and characterized for the first time in GH4169 nickel-based alloy. The results show that the stacking sequence of the LPSO phase is ABCBCBA, which indicates that this LPSO phase has a 6H structure. Meanwhile, the orientation relationships between LPSO phase and the Ni matrix are (11–1)γ//(0006)LPSO and [011]γ//[2-1-10]LPSO.

High elongation heterostructure rare earth magnesium alloy based on rotating backward extrusion process

In this paper, Mg-9.5Gd-4Y–2Zn-0.5Zr cylindrical parts were prepared by the conventional backward extrusion (CBE) process and rotating backward extrusion (RBE) process. The effects of the two processes on the microstructure and mechanical properties of different orientation regions of rare earth magnesium alloy were analyzed and compared. The RBE process introduces a torsional shear quantity based on the CBE process. By changing the direction of plastic flow, has a positive effect on the elongation (EL) of the alloy. It was found that dynamic recrystallization (DRX) occurred in both CBE and RBE processes. With the transition of deformation, the strain continues to accumulate, and the DRX mechanism changes from discontinuous dynamic recrystallization (DDRX) to continuous dynamic recrystallization (CDRX). Compared with the CBE process, the grain refinement of the RBE process is more significant. After deformation, a more significant heterostructure is obtained in the RBE-45° region, and the average grain size reaches 24.7 μm. The ultimate tensile strength (UTS), yield strength (YS), and EL of the alloy in this region are 292.5 ± 7.7 MPa, 226.6 ± 7.4 MPa, and 21.5 ± 1.3 %, respectively. Although the strength is slightly lower than that of CBE alloy, better plasticity is obtained. The excellent strength-toughness synergy is attributed to the synergistic effect between heterogeneous regions of non-uniform microstructure. This study provides some theoretical guidance for the industrial production of large-size magnesium alloy cylindrical parts and subsequent applications.

Emergence of rapid solidification microstructure in additive manufacturing of a Magnesium alloy

Abstract Bioresorbable Mg-based alloys with low density, low elastic modulus, and excellent biocompatibility are outstanding candidates for temporary orthopedic implants. Coincidentally, metal additive manufacturing (AM) is disrupting the biomedical sector by providing fast access to patient-customized implants. Due to the high cooling rates associated with fusion-based AM techniques, they are often described as rapid solidification processes. However, conclusive observations or rapid solidification in metal AM — attested by drastic microstructural changes induced by solute trapping, kinetic undercooling, or morphological transitions of the solid-liquid interface — are scarce. Here we study the formation of banded microstructures during laser powder-bed fusion (LPBF) of a biomedical-grade Magnesium-rare earth alloy, combining advanced characterization and state-of-the-art thermal and phase-field modeling. Our experiments unambiguously identify microstructures as the result of an oscillatory banding instability known from other rapid solidification processes. Our simulations confirm that LPBF-relevant solidification conditions strongly promote the development of banded microstructures in a Mg-Nd alloy. Simulations also allow us to peer into the sub-micrometer nanosecond-scale details of the solid-liquid interface evolution giving rise to the distinctive banded patterns. Since rapidly solidified Mg alloys may exhibit significantly different mechanical and corrosion response compared to their cast counterparts, the ability to predict the emergence of rapid solidification microstructures (and to correlate them with local solidification conditions) may open new pathways for the design of bioresorbable orthopedic implants, not only fitted geometrically to each patient, but also optimized with locally-tuned mechanical and corrosion properties.

Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures

Mg-Gd-Y-Zr alloy, as a typical magnesium rare-earth (Mg-RE) alloy, is gaining popularity in the advanced equipment manufacturing fields owing to its noticeable age-hardening properties and high specific strength. However, it is extremely challenging to prepare wrought components with large dimensions and complex shapes because of the poor room-temperature processability of Mg-Gd-Y-Zr alloy. Herein, we report a wire-arc directed energy deposited (DED) Mg-10.45Gd-2.27Y-0.52Zr (wt.%, GW102K) alloy with high RE content presenting a prominent combination of strength and ductility, realized by tailored nanoprecipitates through an optimized heat treatment procedure. Specifically, the solution-treated sample exhibits excellent ductility with an elongation (EL) of (14.6 ± 0.1)%, while the aging-treated sample at 200 °C for 58 h achieves an ultra-high ultimate tensile strength (UTS) of (371 ± 1.5) MPa. Besides, the aging-treated sample at 250 °C for 16 h attains a good strength-ductility synergy with a UTS of (316 ± 2.1) MPa and a EL of (8.5 ± 0.1)%. Particularly, the evolution mechanisms of precipitation response induced by various aging parameters and deformation behavior caused by nanoprecipitates type were also systematically revealed. The excellent ductility resulted from coordinating localized strains facilitated by active slip activity. And the ultra-high strength should be ascribed to the dense nano-β′ hampering dislocation motion. Additionally, the shearable nano-β 1 contributed to the good strength-ductility synergy. This work thus offers insightful understanding into the nanoprecipitates manipulation and performance tailoring for the wire-arc DED preparation of large-sized Mg-Gd-Y-Zr components with complex geometries.

A viscoplastic self-consistent analysis of tensile anisotropy and tension-compression asymmetry in rare-earth magnesium alloy

The anisotropy and tension-compression asymmetry of rare-earth magnesium (Mg-RE) alloys have attracted significant attention. In this study, the room-temperature tensile anisotropy and tension-compression asymmetry of the extruded Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy were investigated utilizing techniques such as optical microscopy (OM), electron backscatter diffraction (EBSD), and viscoplastic self-consistent (VPSC) modeling. Among the tensile samples, the T0 sample (with axis parallel to extrusion direction) exhibits the greatest tensile yield strength (TYS) of 270 MPa and ultimate tensile strength (UTS) of 336 MPa, the T45 sample (with axis inclined at a 45° angle to extrusion direction) and T90 sample (with axis perpendicular to extrusion direction) exhibit lower TYS and UTS. The C0 sample shows a slightly greater compressive yield strength (CYS) of 290 MPa. The ratio of TYS/CYS is approximately 1.07. This study significantly adjusts the VPSC hardening parameters through the Schmid factor of deformation mechanisms in Mg-RE alloy, particularly increasing the τ0 (critical resolved shear stress, CRSS) and τ1 values for basal <a> slip and {10-12} twinning. The ratios of CRSS for other deformation mechanisms to basal <a> slip are approximately as follows: CRSSTwin/CRSSBas = 2, CRSSPri/CRSSBas ≈ 2.7 and CRSSPyr/CRSSBas ≈ 3.3, while these ratios in traditional alloys are generally higher. The stress-strain curves and pole figures obtained from the modified VPSC model demonstrate excellent agreement with experimental results. According to the VPSC simulation results, the primary factor contributing to tensile anisotropy is the disparity in the activation levels of slip systems. The inclusion of rare-earth elements mitigates the tension-compression asymmetry by reducing the difference of CRSS between different deformation mechanisms.

Data analysis of the influence of microstructure, composition, and loading conditions on stress corrosion cracking behavior of Mg alloys

Stress corrosion cracking (SCC) can be a crucial problem in applying rare earth (RE) Magnesium alloys in environments where mechanical loads and electrochemical driven degradation processes interact. It has been proven already that the SCC behavior is associated with microstructural features, compositions, loading conditions, and corrosive media, especially in-vivo. However, it is still unclear when and how mechanisms acting on multiple scales and respective system descriptors predictable contribute to SCC for the wide set of existing Mg alloys. In the present work, suitable literature data along SCC of Mg alloys has been analyzed to enable the development of a reliable SCC model for MgGd binary alloys. Pearson correlation coefficient and linear fitting are utilized to describe the contribution of selected parameters to corrosion and mechanical properties. Based on our data analysis, a parameter ranking is obtained, providing information on the SCC impact with regard to ultimate tensile strength (UTS) and fracture elongation of respective materials. According to the analyzed data, SCC susceptibility can be grouped and mapped onto Ashby type diagrams for UTS and elongation of respective base materials tested in air and in corrosive media. The analysis reveals the effect of secondary phase content as a crucial materials descriptor for our analyzed materials and enables better understanding towards SCC model development for Mg-5Gd alloy based implant.

Improving strength-ductility of Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr magnesium alloy due to bimodal LPSO and dislocations

Rare-earth (RE) magnesium alloys have attracted lots of attention due to their excellent mechanical properties. In this work, the microstructure and mechanical properties of as-extruded 8.5Gd-4.5Y-0.8Zn-0.4Zr magnesium alloy under different solution treatment were examined with the optical microscope (OM), scanning electron microscope (SEM), high resolution transmission electron microscope (HRTEM), electron back-scattered diffraction (EBSD) and Instron testing machine. The results show that the ES12 alloy (solution treatment for 12 h at 520 °C) has the highest ultimate tensile strength (UTS) of 390 MPa with a fracture elongation of 24.5% at the cost of a minor drop in yielding strength (YS) compared to the as-extruded alloy. During solution treatment, the block-shaped long period stacking ordered (LPSO) in as-extruded alloy evolves into plate-shaped LPSO, which disperses at grain boundaries (GBs), and lamellar LPSO, which distributes in grains. The coexistence of plate-shaped and lamellar LPSO, which impedes the dislocations movement, and the activated <c + a> dislocations are regarded as the primary reasons for mechanical properties improvement. Furthermore, the (11–21) <1–100> texture in as-extruded alloy transforms into the (11–20) <0001> texture in ES12 alloy. The average grain size increases from 3.45 μm in as-extruded alloy to 18.70 μm in ES12 alloy. The Schmid factors of {0001} <11–20>, {10-10} <11–20>, {10–11} <11–20>, and {11–22} <11–23> increase, which indicate that slip systems are more easily activated in plastic deformation. The dynamic recrystallization (DRX) grains fraction increase to 92.8% for ES12 alloy due to the particle-stimulated nucleation (PSN) mechanism triggered by block-shaped and plate-shaped LPSO. The freshly DRXed grains further weaken the texture, and reduce the dislocation density. All of these factors increase elongation of RE magnesium alloy.

Experiment and first-principles calculation to investigate the phenomenon of Gd and Y elemental enrichments in the long-period stacking ordered phase

In this study, the Gd and Y elemental enrichment in long-period stacking ordered (LPSO) phases has been systematically studied by combining energy dispersive X-ray spectrometry (EDS) diagram and first-principles calculation. This phenomenon differs from the ordinary type of LPSO phase, which consists of only one rare earth element. It is highly likely that the observed effect is attributed to the preferential formation of the Mg-Y-Zn LPSO phase, which is subsequently replaced by the Gd element to form more stable Mg-Gd-Y-Zn LPSO phases. The results of the formation enthalpy and energy suggest that the most probable situation is one group of Gd (four atoms) replacing the Y atoms. The electronic properties and elastic properties were performed to investigate the bonding character and mechanical stability. It can be found that the substitutional doping of the Gd element is able to improve bonding strength and increase anisotropy. Therefore, this research explains the interesting phenomenon of Gd and Y elemental enrichment for in-depth understanding of LPSO phases, and provides valuable data that can be utilized for designing rare-earth magnesium alloys with improved properties.

Effect of stacking faults and long period stacking order on mechanical properties for rare-earth magnesium alloy: As-cast versus as-solutioned

In this paper, the microstructure and tensile mechanical properties of Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr rare-earth (RE) magnesium alloy in the as-cast state and its solid solution state were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and the first-principles simulation. The results show that the mechanical properties were improved after solution treatment. The CS520-12 alloy, treated at 520 °C for 12 h, exhibited excellent mechanical properties, possessing an ultimate tensile strength (UTS) of 343 ± 5 MPa and an elongation of 18.9 ± 0.8 %. These main reasons for the improving of mechanical properties was attributed the formation of I1 stacking faults (SFs) and accumulated-dislocations. The Y element, originating from the melt of the eutectic phase during solution treatment, resulted in a reduction in stacking faults energy (SFE) and facilitated the formation of I1 faults. The presence of numerous SFs hindered dislocation slip. The other key factors for elongation improving were that the weaken of texture, and geometrically necessary dislocation (GND) density decreased from 1.52 × 1013m−2 to 1.22 × 1013m−2. 14H-LPSO phase played an important role in the improving mechanical properties for CS480-12, CS480-24 and CS520-24 alloys. The higher elastic modulus of LPSO compared to Mg matrix, according to the first-principles calculated results, enabled its function as a short-fiber, thus strengthened the mechanical properties. Block-shaped 14H-LPSO in CS480-12 alloys, distributed at the grain boundaries (GBs), suppressed the grow of cracks. The lamellar 14H-LPSO within the grains of CS480-24 and CS520-24 alloys were parallel to the <a> dislocations, which compared with SFs of CS520-12 alloy, can't effectively inhibit the movement of dislocations.

Effect of zinc oxide on the electrochemical properties of micro-arc oxidation coatings in seawater

PurposeThe purpose of this paper is to explore the effect of ZnO on the structure and properties of micro-arc oxidation (MAO) coating on rare earth magnesium alloy under large concentration gradient.Design/methodology/approachThe macroscopic and microscopic morphology, thickness, surface roughness, chemical composition and structure of the coating were characterized by different characterization methods. The corrosion resistance of the film was studied by electrochemical and scanning Kelvin probe force microscopy. The results show that the addition of ZnO can significantly improve the compactness and corrosion resistance of the MAO coating, but the high concentration of ZnO will cause microcracks, which will reduce the corrosion resistance to a certain extent.FindingsWhen the concentration of zinc oxide is 8 g/L, the compactness and corrosion resistance of the coating are the best, and the thickness of the coating is positively correlated with the concentration of ZnO.Research limitations/implicationsToo high concentration of ZnO reduces the performance of MAO coating.Practical implicationsThe MAO coating prepared by adding ZnO has good corrosion resistance. Combined with organic coatings, it can be applied in corrosive marine environments, such as ship parts and hulls. To a certain extent, it can reduce the economic loss caused by corrosion.Originality/valueThe effect of ZnO on the corrosion resistance of MAO coating in electrolyte solution was studied systematically, and the conclusion was new to the common knowledge.

Analysis and Resolution of Flow Line Defects in Rare Earth Magnesium Alloys

Analysis and Resolution of Flow Line Defects in Rare Earth Magnesium Alloys