Typical β-sialon and mixed α-β-sialon starting compositions have been densified by pressureless sintering using either Ln 2 O 3 or equimolar mixtures of Ln 2 O 3 + Y 2 O 3 where Ln = Sm, Dy, Yb. The resulting materials were heat treated at 1000–1500°C to devitrify the grain boundary glass into crystalline oxynitride phases. The effects of rare earth ionic size and heat-treatment temperature on the stability of devitrified phases, microstructure and mechanical properties have been studied. Microstructural characterisation of the α-sialon phase formed in these systems revealed that α is only stable at high temperatures and transforms to β-sialon plus grain boundary phases at lower temperatures; this provides an excellent mechanism for controlling the mechanical properties of the final material. Typische β-Sialon und α-β Sialon Ausgangsmischungen wurden durch druckloses Sintern unter Verwendung von Ln 2 O 3 oder einem equimolaren Gemisch aus Ln 2 O 3 + Y 2 O 3 verdichtet, wobei Ln = Sm, Dy, Yb bedeutet. Die sich daraus ergebenden Materialien wurden bei 1000–1500°C wärmebehandelt, um die Glasphase an den Korngrenzen in kristalline Oxyniridphase umzuwandeln. Der Einfluß der Größe seltenener Erdmetallionen und der Wärmebehandlungstemperatur auf die Stabilität der umgewandelten Glasphase, das Gefüge und die mechanischen Eigenschaften wurde untersucht. Die Gefügecharakterisierung der α-Sialonphase, die sich in diesem System bildet, ergab, daß α nur bei hohen Temperaturen stabil ist und sich bei niedrigen Temperaturen in β-Sialon und Korngrenzenphase umwandelt. Dieser Mechanismus bietet eine exzellente Möglichkeit, die mechanischen Eigenschaften des Endmaterials einzustellen. Des mélanges initaux usuels de sialon β et de sialon mixte α-β ont été densifiés par frittage sous pression, en utilisant soit Ln 2 O 3 , soit des mélanges équimolaires Ln 2 O 3 + Y 2 O 3 , où Ln = Sm, Dy, Yb. Les matériaux obtenus ont été soumis à un traitement thermique à 1000–1500°C afin que la phase amorphe présente aux joints de grains cristallise en phases oxynitrures. On a étudié l'effet du rayon ionique des terres rares employées et de la température de traitement sur la stabilité de ces phases, leur microstructure, leurs propriétés mécaniques. La caractérisation microstructurale du sialon α qui se forme dans ces systèmes montre que la phase α n'est stable qu'à haute température, et se transforme en un mélange de sialon β et de phase intergranulaire à basse température; ce mécanisme fournit un excellent moyen pour maîtriser les propriétés mécaniques du produit final.