Rapid Bone Regeneration Research Articles

Nanomaterial-based bone regeneration.

Bone diseases/injuries have been driving an urgent quest for bone substitutes for bone regeneration. Nanoscaled materials with bone-mimicking characteristics may create suitable microenvironments to guide effective bone regeneration. In this review, the natural hierarchical architecture of bone and its regeneration mechanisms are elucidated. Recent progress in the development of nanomaterials which can promote bone regeneration through bone-healing mimicry (e.g., compositional, nanocrystal formation, structural, and growth factor-related mimicking) is summarized. The nanoeffects of nanomaterials on the regulation of bone-related biological functions are highlighted. How to prepare nanomaterials with combinative bone-biomimicry features according to the bone healing process is prospected in order to achieve rapid bone regeneration in situ.

Biomimetic whitlockite inorganic nanoparticles-mediated in situ remodeling and rapid bone regeneration

Bone remodeling process relies on complex signaling pathway between osteoblasts and osteoclasts and control mechanisms to achieve homeostasis of their growth and differentiation. Despite previous achievements in understanding complicated signaling pathways between cells and bone extracellular matrices during bone remodeling process, a role of local ionic concentration remains to be elucidated. Here, we demonstrate that synthetic whitlockite (WH: Ca18Mg2(HPO4)2(PO4)12) nanoparticles can recapitulate early-stage of bone regeneration through stimulating osteogenic differentiation, prohibiting osteoclastic activity, and transforming into mechanically enhanced hydroxyapatite (HAP)-neo bone tissues by continuous supply of PO43- and Mg2+ under physiological conditions. In addition, based on their structural analysis, the dynamic phase transformation from WH into HAP contributed as a key factor for rapid bone regeneration with denser hierarchical neo-bone structure. Our findings suggest a groundbreaking concept of 'living bone minerals' that actively communicate with the surrounding system to induce self-healing, while previous notions about bone minerals have been limited to passive products of cellular mineralization.

Nanocomposite Membranes Enhance Bone Regeneration Through Restoring Physiological Electric Microenvironment.

Physiological electric potential is well-known for its indispensable role in maintaining bone volume and quality. Although implanted biomaterials simulating structural, morphological, mechanical, and chemical properties of natural tissue or organ has been introduced in the field of bone regeneration, the concept of restoring physiological electric microenvironment remains ignored in biomaterials design. In this work, a flexible nanocomposite membrane mimicking the endogenous electric potential is fabricated to explore its bone defect repair efficiency. BaTiO3 nanoparticles (BTO NPs) were first coated with polydopamine. Then the composite membranes are fabricated with homogeneous distribution of Dopa@BTO NPs in poly(vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) matrix. The surface potential of the nanocomposite membranes could be tuned up to -76.8 mV by optimizing the composition ratio and corona poling treatment, which conform to the level of endogenous biopotential. Remarkably, the surface potential of polarized nanocomposite membranes exhibited a dramatic stability with more than half of original surface potential remained up to 12 weeks in the condition of bone defect. In vitro, the membranes encouraged bone marrow mesenchymal stem cells (BM-MSCs) activity and osteogenic differentiation. In vivo, the membranes sustainably maintained the electric microenvironment giving rise to rapid bone regeneration and complete mature bone-structure formation. Our findings evidence that physiological electric potential repair should be paid sufficient attention in biomaterials design, and this concept might provide an innovative and well-suited strategy for bone regenerative therapies.

Amorphous Silica: A New Antioxidant Role for Rapid Critical-Sized Bone Defect Healing.

Traumatic fractures cause structurally unstable sites due to severe bone loss. Such fractures generate a high yield of reactive oxygen species (ROS) that can lead to oxidative stress. Excessive and prolonged ROS activity impedes osteoblast differentiation and instigates long healing times. Stimulation of antioxidants such as superoxide dismutase (SOD1), are crucial to reduce ROS, stimulate osteogenesis, and strengthen collagen and mineral formation. Yet, no current fixative devices have shown an ability to enhance collagen matrix formation through antioxidant expression. This study reports plasma-enhanced chemical vapor deposition based amorphous silicon oxynitride (Si(ON)x) as a potential new fracture healing biomaterial that adheres well to the implant surface, releases Si(+4) to enhance osteogenesis, and forms a surface hydroxyapatite for collagen mineral attachment. These materials provide a sustained release of Si(+4) in physiological environment for extended times. The dissolution rate partially depends on the film chemistry and can be controlled by varying O/N ratio. The presence of Si(+4) enhances SOD1, which stimulates other osteogenic markers downstream and leads to rapid mineral formation. In vivo testing using a rat critical-sized calvarial defect model shows a more rapid bone-regeneration for these biomaterials as compared to control groups, that implies the clinical significance of the presented biomaterial.

Surface delivery of tunable doses of BMP-2 from an adaptable polymeric scaffold induces volumetric bone regeneration.

The rapid and effective bone regeneration of large non-healing defects remains challenging. Bioactive proteins, such as bone morphogenetic protein (BMP)-2, are proved their osteoinductivity, but their clinical use is currently limited to collagen as biomaterial. Being able to deliver BMP-2 from any other biomaterial would broaden its clinical use. This work presents a novel means for repairing a critical size volumetric bone femoral defect in the rat by combining a osteoinductive surface coating (2D) to a polymeric scaffold (3D hollow tube) made of commercially-available PLGA. Using a polyelectrolyte film as BMP-2 carrier, we tune the amount of BMP-2 loaded in and released from the polyelectrolyte film coating over a large extent by controlling the film crosslinking level and initial concentration of BMP-2 in solution. Using microcomputed tomography and quantitative analysis of the regenerated bone growth kinetics, we show that the amount of newly formed bone and kinetics can be modulated: an effective and fast repair was obtained in 1-2 weeks in the best conditions, including complete defect bridging, formation of vascularized and mineralized bone tissue. Histological staining and high-resolution computed tomography revealed the presence of bone regeneration inside and around the tube with spatially distinct organization for trabecular-like and cortical bones. The amount of cortical bone and its thickness increased with the BMP-2 dose. In view of the recent developments in additive manufacturing techniques, this surface-coating technology may be applied in combination with various types of polymeric or metallic scaffolds to offer new perspectives of bone regeneration in personalized medicine.

A bioceramic with enhanced osteogenic properties to regulate the function of osteoblastic and osteocalastic cells for bone tissue regeneration

Bioceramics for regenerative medicine applications should have the ability to promote adhesion, proliferation and differentiation of osteoblast and osteoclast cells. Osteogenic properties of the material are essential for rapid bone regeneration and new bone formation. The aim of this study was to develop a silicate-based ceramic, gehlenite (GLN, Ca2Al2SiO7), and characterise its physiochemical, biocompatibility and osteogenic properties. A pure GLN powder was synthesised by a facile reactive sintering method and compacted to disc-shaped specimens. The sintering behaviour and degradation of the GLN discs in various buffer solutions were fully characterised. The cytotoxicity of GLN was evaluated by direct and indirect methods. In the indirect method, primary human osteoblast cells (HOBs) were exposed to diluted extracts (100, 50, 25, 12.5 and 6.25 mg ml−1) of fine GLN particles in culture medium. The results showed that the extracts did not cause any cytotoxic effect on the HOBs with the number of cells increasing significantly from day 1 to day 7. GLN-supported HOB attachment and proliferation, and significantly enhanced osteogenic gene expression levels (Runx2, osteocalcin, osteopontin and bone sialoprotein) were compared with biphasic calcium phosphate groups (BCP, a mixture of hydroxyapatite (60wt.%) and β-tricalcium phosphate(40wt.%)). We also demonstrated that in addition to supporting HOB attachment and proliferation, GLN promoted the formation of tartrate-acid resistance phosphatase (TRAP) positive multinucleated osteoclastic cells (OCs) derived from mouse bone marrow cells. Results also demonstrated the ability of GLN to support the polarisation of OCs, a prerequisite for their functional resorptive activity which is mainly influenced by the composition and degradability of biomaterials. Overall, the developed GLN is a prospective candidate to be used in bone regeneration applications due its effective osteogenic properties and biocompatibility.

Rapid bone regeneration by Escherichia coli-derived recombinant human bone morphogenetic protein-2 loaded on a hydroxyapatite carrier in the rabbit calvarial defect model.

BackgroundThe aim of this study was to determine the osteoconductivity of hydroxyapatite particles (HAP) as a carrier for Escherichia coli-derived recombinant human bone morphogenetic protein-2 (ErhBMP-2). Two 8-mm diameter bicortical calvarial defects were created in each of 20 rabbits. One of each pair of defects was randomly assigned to be filled with HAP only (HAP group) or ErhBMP-2 loaded HAP (ErhBMP-2/HAP group), while the other defect was left untreated (control group). The animals were killed after either 2 weeks (n = 10) or 8 weeks (n = 10) of healing, and histological, histomorphometric, and tomographic analyses were performed.ResultsAll experimental sites showed uneventful healing during the postoperative healing period. In both histomorphometric and tomographic analyses, the new bone area or volume of the ErhBMP-2/HAP group was significantly greater than that of the HAP and control groups at 2 weeks (p < 0.05). However, at 8 weeks, no significant difference in new bone area or volume was observed between the ErhBMP-2/HAP and HAP groups. The total augmented area or volume was not significantly different between the ErhBMP-2/HAP and HAP groups at 2 and 8 weeks.ConclusionsCombining ErhBMP-2 with HAP could significantly promote rapid initial new bone formation. Moreover, HAP graft could increase new bone formation and space maintenance, therefore it might be one of the effective carriers of ErhBMP-2.

Clumps of a mesenchymal stromal cell/extracellular matrix complex can be a novel tissue engineering therapy for bone regeneration

Background aimsThe transplantation of mesenchymal stromal cells (MSCs) to damaged tissue has attracted attention in scientific and medical fields as an effective regenerative therapy. Nevertheless, additional studies are required to develop an MSC transplant method for bone regeneration because the use of an artificial scaffold restricts the number of transplanted cells and their function. Furthermore, regulating the degree of cell differentiation in vitro is desirable for a more effective regenerative therapy. To address these unresolved issues, with the use of a self-produced extracellular matrix (ECM), we developed clumps of an MSC/ECM complex (C-MSCs). MethodsMSCs isolated from rat femur were cultured in growth medium supplemented with 50 μg/mL of ascorbic acid for 7 days. To obtain C-MSCs, confluent cells were scratched with the use of a micropipette tip to roll up the cellular sheet, which consisted of ECM produced by the MSCs. The biological properties of C-MSCs were assessed in vitro and their bone regenerative activity was tested by use of a rat calvarial defect model. ResultsImmunofluorescent confocal microscopic analysis revealed that type I collagen formed C-MSCs. Osteopontin messenger RNA expression and amount of calcium content were higher in C-MSCs cultured in osteo-inductive medium than those of untreated C-MSCs. The transplantation of osteogenic-differentiated C-MSCs led to rapid bone regeneration in the rat calvarial defect model. ConclusionsThese results suggest that the use of C-MSCs refined by self-produced ECM, which contain no artificial scaffold and can be processed in vitro, may represent a novel tissue engineering therapy.

Mandibular Third Molar Extraction Wound Healing With and Without Platelet Rich Plasma: A Comparative Prospective Study.

To evaluate the efficacy of autologous platelet rich plasma (PRP) in regeneration of bone and to assess clinical compatibility of the material in mandibular third molar extraction socket. To compare the healing of mandibular third molar extraction wounds with and without PRP. Group A consists of the 30 patients where PRP will be placed in the extraction socket before closure of the socket. Group B consists of 30 patients who will be the control group where the extraction sockets will be closed without any intra socket medicaments. The patients would be allocated to the groups randomly. Soft tissue healing was better in study site compared to control site. The result of the study shows rapid bone regeneration in the extraction socket treated with PRP when compared with the socket without PRP. Evaluation for bone blending and trabecular bone formation started earlier in PRP site compared to control, non PRP site. Also there was less postoperative discomfort on the PRP treated side. Autologous PRP is biocompatible and has significant improved soft tissue healing, bone regeneration and increase in bone density in extraction sockets.

Enhanced differentiation of osteoblastic cells on novel chitosan/β-1,3-glucan/bioceramic scaffolds for bone tissue regeneration

Bone scaffolds for regenerative medicine applications should have the ability to promote adhesion, proliferation and differentiation of osteoblast cells. Osteoconductive, osteoinductive and osteopromotive properties of the material are essential for rapid bone regeneration and new bone formation. In this study, the osteogenic potential of two novel tri-component scaffolds composed of krill chitosan, bacterial β-1,3-glucan and bioceramics (HAp or a mix of HAp/β-TCP granules) was investigated. The typical markers of the first (type I collagen), second (bone alkaline phosphatase) and third stages (osteocalcin) of the osteoblast differentiation process were evaluated during in vitro experimentation. The study was carried out using three various osteoblastic cell lines (normal human fetal osteoblast cells hFOB 1.19, human osteoblast-like cells derived from osteosarcoma Saos-2 and mouse calvarial preosteoblast cells MC3T3-E1 Subclone 4). The bone alkaline phosphatase (bALP) and osteocalcin (OC) were determined quantitatively using enzyme-linked immunosorbent assays, and type I collagen (Col I) was evaluated qualitatively using the direct immunofluorescence (DIF) method. The data obtained clearly prove that novel scaffolds have the ability to increase bALP activity, to enhance extracellular matrix synthesis (Col I and OC) and to induce mineralized nodule formation during osteogenic differentiation. In conclusion, novel tri-component materials have osteoconductive and osteopromotive properties, and thus are promising materials in bone tissue engineering applications to accelerate the bone regeneration process.

Influence of the mechanical environment on the engineering of mineralised tissues using human dental pulp stem cells and silk fibroin scaffolds.

Teeth constitute a promising source of stem cells that can be used for tissue engineering and regenerative medicine purposes. Bone loss in the craniofacial complex due to pathological conditions and severe injuries could be treated with new materials combined with human dental pulp stem cells (hDPSCs) that have the same embryonic origin as craniofacial bones. Optimising combinations of scaffolds, cells, growth factors and culture conditions still remains a great challenge. In the present study, we evaluate the mineralisation potential of hDPSCs seeded on porous silk fibroin scaffolds in a mechanically dynamic environment provided by spinner flask bioreactors. Cell-seeded scaffolds were cultured in either standard or osteogenic media in both static and dynamic conditions for 47 days. Histological analysis and micro-computed tomography of the samples showed low levels of mineralisation when samples were cultured in static conditions (0.16±0.1 BV/TV%), while their culture in a dynamic environment with osteogenic medium and weekly µCT scans (4.9±1.6 BV/TV%) significantly increased the formation of homogeneously mineralised structures, which was also confirmed by the elevated calcium levels (4.5±1.0 vs. 8.8±1.7 mg/mL). Molecular analysis of the samples showed that the expression of tooth correlated genes such as Dentin Sialophosphoprotein and Nestin were downregulated by a factor of 6.7 and 7.4, respectively, in hDPSCs when cultured in presence of osteogenic medium. This finding indicates that hDPSCs are able to adopt a non-dental identity by changing the culture conditions only. Also an increased expression of Osteocalcin (1.4x) and Collagen type I (1.7x) was found after culture under mechanically dynamic conditions in control medium. In conclusion, the combination of hDPSCs and silk scaffolds cultured under mechanical loading in spinner flask bioreactors could offer a novel and promising approach for bone tissue engineering where appropriate and rapid bone regeneration in mechanically loaded tissues is required.

Advanced nanocomposites for bone regeneration.

The field of orthopedic tissue engineering is quickly expanding with the development of novel materials and strategies designed for rapid bone regeneration. While autologous bone grafts continue to be the standard of care, drawbacks include donor-site morbidity and short tissue supplies. Herein we report a novel nanocomposite sponge composed of poly(1,8-octanediol-co-citrate) (POC) and the bioactive ceramic β-tricalcium phosphate (TCP). We show that these nanocomposite sponges can be used as a depot for bone-producing (a.k.a. osteogenic) growth factors. In vitro bioactivity is demonstrated by significant upregulation of osteogenic genes, osteopontin (∼3 fold increase), osteocalcin (∼22 fold increase), alkaline phosphatase (∼10 fold increase), and transcription factor, RUNX2 (∼5 fold increase) over basal expression levels in mesenchymal stem cells. In vivo osteogenicity and biocompatibility is demonstrated in a standard subcutaneous implant model in rat. Results show that the nanocomposite sponge supports complete cell infiltration, minimal adverse foreign body response, positive cellular proliferation, and cellular expression of osteogenic markers in subcutaneous tissue. The results shown herein are encouraging and support the use of this sponge for future bone tissue engineering efforts.

Residents' journal review

Residents' journal review

Chondrogenically differentiated mesenchymal stromal cell pellets stimulate endochondral bone regeneration in critical-sized bone defects

Grafting bone defects or atrophic non-unions with mesenchymal stromal cells (MSCs)-based grafts is not yet successful. MSC-based grafts typically use undifferentiated or osteogenically differentiated MSCs and regenerate bone through intramembranous ossification. Endochondral ossification might be more potent but requires chondrogenic differentiation of MSCs. Here, we determined if chondrogenically differentiated MSC (ch-MSC) pellets could induce bone regeneration in an orthotopic environment through endochondral ossification. Undifferentiated MSC pellets (ud-MSC) and ch-MSC pellets were generated from MSCs of human donors cultured on chondrogenic medium for respectively 3 (ud-MSC) and 21 (ch-MSC) days. A 6mm femoral bone defect was made and stabilised with an internal plate in 27 athymic rats. Defects were left empty for 6 weeks to develop an atrophic non-union before they were grafted with ch-MSC pellets or ud-MSC pellets. Micro-CT scans made 4 and 8 weeks after grafting showed that ch-MSC pellets resulted in significantly more bone than ud-MSC pellets. This regenerated bone could completely bridge the defect, but the amount of bone regeneration was donor-dependent. Histology after 7 and 14 days showed slowly mineralising pellets containing hypertrophic chondrocytes, as well as TRAP-positive and CD34-positive cells around the ch-MSC pellets, indicating osteoclastic resorption and vascularisation typical for endochondral ossification. In conclusion, grafting critical femoral bone defects with chondrogenically differentiated MSC pellets led to rapid and pronounced bone regeneration through endochondral ossification and may therefore be a more successful MSC-based graft to repair large bone defects or atrophic non-unions. But, since bone regeneration was donor-depend, the generation of potent chondrogenically differentiated MSC pellets for each single donor needs to be established first.

Enhancement of in vitro culture efficiency of mesenchymal stem cells derived from deer antlers

The annual regrowth of deer antlers is a connatural developmental event in mammals. Therefore, studying regeneration of deer antlers could be a unique natural model of rapid and complete bone regeneration in human and other mammals. However, little is known about culture conditions and regulatory factors that stimulate growing of deer antler cells in vitro. The aim of this study was to enhance an in vitro culture efficiency of mesenchymal stem cells (MSCs) derived from deer antlers. In order to improve the culture condition, we selected minimal essential medium alpha (MEMα) as a basal medium and investigate whether serum could stimulate growing in these cells in basal medium in a dose-dependent manner. Next, to investigate the optimal temperature and O2 tension, the antler cells were cultured in different temperature and controlled O2 percentages. Through the results of number of harvested cells after 1 week, we selected MEMα, 10% fetal bovine serum (FBS), 37°C, 20% O2, and 5% CO2 tension as a basic culture conditions. Also, we could observed enhanced proliferation results by addition of the supplements [L-glutamine 2 mM, β-mercaptoethanol 100 μM, non-essential amino acid (NEAA) 0.1 mM, and HEPES 10 mM] and growth factors [basic fibroblast growth factor (bFGF) 10 ng/mL, epidermal growth factor (EGF) 20 ng/mL, insulin-like growth factor-1 (IGF-1) 10 ng/mL] and harvested antler cells strongly expressed STRO-1 and CD 90. Our results demonstrate that allow continuous proliferation of antler cells in vitro established the foundation to basic biology of antler cells and makes possible application to the regenerative medicine in a broad sence.

Comparison of the Use of Adipose Tissue–Derived and Bone Marrow–Derived Stem Cells for Rapid Bone Regeneration

Stem cell–based bone tissue engineering has been recognized as a new strategy for maxillary sinus floor elevation. More rapid bone formation may enhance this technique when simultaneous dental implant placement is desired. Adipose tissue–derived stem cells (ADSCs) and bone marrow stem cells (BMSCs) are the most well-characterized cell sources for bone regeneration, but comparative studies on the osteogenic potential of these cells have yielded conflicting conclusions. This study aimed to compare the rapid bone formation capacity of ADSCs and BMSCs in a canine sinus floor augmentation model. In in vitro studies, BMSCs had a higher proliferative ability and greater osteogenic differentiation potential at both the mRNA and protein levels. When GFP-labeled cells on calcium phosphate cement (CPC) scaffolds were implanted subcutaneously into nude mice, both ADSCs and BMSCs survived for 4 wks, but only BMSCs formed new bone. Furthermore, according to sequential fluorescence labeling results for the canine sinus, BMSCs promoted rapid and greater bone regeneration during the entire observation period. In contrast, obvious mineralization was detected starting from 3 wks after implantation in the ADSC group. These results suggest that BMSCs might be more useful than ADSCs for rapid bone regeneration for sinus augmentation with simultaneous implant placement.

In VivoBone Regeneration Using Tubular Perfusion System Bioreactor Cultured Nanofibrous Scaffolds

The use of bioreactors for the in vitro culture of constructs for bone tissue engineering has become prevalent as these systems may improve the growth and differentiation of a cultured cell population. Here we utilize a tubular perfusion system (TPS) bioreactor for the in vitro culture of human mesenchymal stem cells (hMSCs) and implant the cultured constructs into rat femoral condyle defects. Using nanofibrous electrospun poly(lactic-co-glycolic acid)/poly(ε-caprolactone) scaffolds, hMSCs were cultured for 10 days in vitro in the TPS bioreactor with cellular and acellular scaffolds cultured statically for 10 days as a control. After 3 and 6 weeks of in vivo culture, explants were removed and subjected to histomorphometric analysis. Results indicated more rapid bone regeneration in defects implanted with bioreactor cultured scaffolds with a new bone area of 1.23 ± 0.35 mm(2) at 21 days compared to 0.99 ± 0.43 mm(2) and 0.50 ± 0.29 mm(2) in defects implanted with statically cultured scaffolds and acellular scaffolds, respectively. At the 21 day timepoint, statistical differences (p<0.05) were only observed between defects implanted with cell containing scaffolds and the acellular control. After 42 days, however, defects implanted with TPS cultured scaffolds had the greatest new bone area with 1.72 ± 0.40 mm(2). Defects implanted with statically cultured and acellular scaffolds had a new bone area of 1.26 ± 0.43 mm(2) and 1.19 ± 0.33 mm(2), respectively. The increase in bone growth observed in defects implanted with TPS cultured scaffolds was statistically significant (p<0.05) when compared to both the static and acellular groups at this timepoint. This study demonstrates the efficacy of the TPS bioreactor to improve bone tissue regeneration and highlights the benefits of utilizing perfusion bioreactor systems to culture MSCs for bone tissue engineering.

Bone healing by sterilizable calcium phosphate tetrapods eluting osteogenic molecules

Although bone grafts and prosthetic implants have shown some clinical success in the treatment of bone defects, the graft availability, biocompatibility, function, and longevity still remain to be improved. One possible solution to these problems is to develop bone implants acting on host cells to induce rapid bone regeneration. Here, we demonstrate bone healing by means of a sterilizable and osteogenic molecule-eluting implant system in which two small molecules, a smoothened agonist (SAG) and a helioxanthin derivative (TH), are loaded onto tetrapod-shaped calcium phosphate granules (Tetrabone). We succeeded in directing progenitor cells toward mature osteoblasts with the combined application of the two small molecules acting on different stages of osteogenesis. Tetrabone released SAG and TH for prolonged periods when loaded with these molecules. EOG sterilization did not affect the osteogenic activity of the SAG- and TH-loaded Tetrabones. The combinatorial use of SAG- and TH-loaded Tetrabones achieved bone healing without cell transplantation in a rat femur bone defect model within two weeks. This system will allow us to vary the combination rate of implants loaded with different osteogenic factors depending on the types and sizes of defects, potentially allowing full temporal and spatial control of the bone regeneration.

Biomimetic treatment on dental implants for short-term bone regeneration

The main purpose of this work was to assess the short-term bone regenerative potential of new osteoconductive implants. The novelty of the study lies in the analysis of the effectiveness of a novel two-step treatment which combines shot-blasting with a thermo-chemical treatment, at very short times after implant placement in a minipig model. Three hundred twenty implants with four different surface treatments, namely bioactivated surfaces, micro-rough grit-blasted, micro-rough acid-etched and smooth as-machined titanium implants were placed into the bone of 20 minipigs. The percent of bone-to-implant contact was determined 3days, 1, 2, 3 and 10weeks after implant placement by histomorphometric analysis. Surface composition, topography and wettability of the implant specimens were analysed. The combination of shot-blasting and thermo-chemical treatment accelerated bone regeneration at early stages in comparison with all other treatments between day 3 and week 3 (p < 0.05). The value of osseointegration attained at week 2 was maintained until the end of the experiment without any significant changes (percent direct contact ≈ 85%). This was mostly attributed to the ability of these implants to form in vivo a layer of apatitic mineral that coated the implant and could rapidly stimulate bone nucleation and growth from the implant surface. The surface quality resulting from this treatment on cpTi provided dental implants with a unique ability of rapid bone regeneration and osseointegration. This treatment represents a step forward in the direction of reducing the time prior to implant loading.

Rapid re-synostosis following suturectomy in pediatric mice is age and location dependent

Craniosynostosis is the premature fusion of the cranial sutures early in development. If left untreated, craniosynostosis can lead to complications resulting from cranial deformities or increased intracranial pressure. The standard treatment involves calvarial reconstruction, which in many cases undergoes rapid re-synostosis. This requires additional surgical intervention that is associated with a high incidence of life threatening complications. To better understand this rapid healing, a pediatric mouse model of re-synostosis was developed and characterized. Defects (1.5mm by 2.5mm) over the posterior frontal suture were created surgically in weanling (21days post-natal) and adolescent (50days post-natal) C57Bl/6J mice. In addition, defects were created in the frontal bone lateral to the posterior frontal suture. The regeneration of bone in the defect was assessed using advanced image processing algorithms on micro-computed tomography scans. The genes associated with defect healing were assessed by real-time PCR of mRNA isolated from the tissue present in the defect. The results showed that the weanling mouse healed in a biphasic process with bone bridging the defect by post-operative (post-op) day 3 followed by an increase in the bone volume on day 14. In adolescent mice, there was a delay in bone bridging across the defect, and no subsequent increase in bone volume. No bridging of the defect by 14days post-op was seen in identically sized defects placed lateral to the suture in both weanling and adolescent animals. This study demonstrates that bone regeneration in the cranium is both age and location dependent. Rapid and robust bone regeneration only occurred when the defect was created over the posterior frontal suture in immature weanling mice.