Random-sequence DNA Pool Research Articles

In vitro selection of N 1-methyladenosine-sensitive RNA-cleaving deoxyribozymes with 105-fold selectivity over unmethylated RNA.

RNA-cleaving DNAzymes (RCDs) are catalytically active DNA molecules that cleave a wide range of RNA targets with extremely high sequence-selectivity, but none is able to faithfully discriminate methylated from unmethylated RNA (typically <30-fold). We report the first efforts to isolate RCDs from a random-sequence DNA pool by in vitro selection that cleave RNA/DNA chimera containing N 1-methyladenosine (m1A), one of the most prevalent RNA modifications that plays important regulatory roles in gene expression and human cancers. A cis-acting deoxyribozyme, RCD1-S2m1A, exhibits an observed rate constant (k obs) of 5.3 × 10-2 min-1, resulting in up to 105-fold faster cleavage of the m1A-modified versus unmethylated RNA. Furthermore, a trans-acting fluorogenic deoxyribozyme was constructed by labeling a fluorophore and a quencher at the 5' and 3' ends of the chimeric substrate, respectively. It permits the synchronization of RNA-cleaving with real-time fluorescence signaling, thus allowing the selective monitoring of ALKBH3-mediated demethylation and inhibitor screening in living cells.

An RNA-Cleaving DNAzyme That Requires an Organic Solvent to Function.

Engineering functional nucleic acids active under unusual conditions will not only reveal the hidden talents of nucleic acids but also lay groundwork for pursuing them for unique applications. Although many DNAzymes have been derived to catalyze diverse chemical reactions in aqueous solutions, no prior study has been set up to purposely derive DNAzymes that require an organic solvent to function. Herein, we utilized in vitro selection to isolate RNA-cleaving DNAzymes from a random-sequence DNA pool that were "compelled" to accept 35% dimethyl sulfoxide (DMSO) as a cosolvent, via counter selection in a purely aqueous solution followed by positive selection in the same solution containing 35% DMSO. This experiment indeed led to the discovery of a new DNAzyme that requires 35% DMSO for its catalytic activity but exhibits drastically reduced activity without DMSO. This DNAzyme also requires divalent metal ions for catalysis and uses monovalent ions for activity enhancement. A minimized, more efficient DNAzyme was also derived. This work demonstrates that highly functional organic solvent-dependent DNAzymes can be isolated from random-sequence DNA libraries via forced in vitro selection, thus expanding the capability and potential utility of DNA as enzymes.

In Vitro Selection of M2+-Independent, Fast-Responding Acidic Deoxyribozymes for Bacterial Detection.

We report on the first efforts to isolate acidic RNA-cleaving DNAzymes (aRCDs) from a random-sequence DNA pool by in vitro selection that are activated by a microbe Escherichia coli (E. coli), at pH 5.3. Importantly, these E. coli-responsive aRCDs only require monovalent metal ions as cofactors for cleaving a fluorogenic chimeric DNA/RNA substrate. Such characteristics can be used to efficiently protect RCDs from both intrinsic chemical instability and external enzymatic degradation. One remarkable DNAzyme, aRCD-EC1, is specific for E. coli, and its target is likely a protein. Furthermore, truncated aRCD-EC1 had significantly improved catalytic activity with an observed rate constant (kobs) of 1.18 min-1, making it the fastest bacteria-responding RCD reported to date. Clinical evaluation of this aRCD-based fluorescent assay using 40 patient urine samples demonstrated a diagnostic sensitivity of 100% and a specificity of 100% at a total analysis time of 50 min without a bacterial culture. This work can expand the repertoire of DNAzymes that are active under nonphysiological conditions, thus facilitating the development of diverse DNAzyme-based biosensors in clinical diagnosis.

DNA's Encounter with Ultraviolet Light: An Instinct for Self-Preservation?

Photochemical modification is the major class of environmental damage suffered by DNA, the genetic material of all free-living organisms. Photolyases are enzymes that carry out direct photochemical repair (photoreactivation) of covalent pyrimidine dimers formed in DNA from exposure to ultraviolet light. The discovery of catalytic RNAs in the 1980s led to the "RNA world hypothesis", which posits that early in evolution RNA or a similar polymer served both genetic and catalytic functions. Intrigued by the RNA world hypothesis, we set out to test whether a catalytic RNA (or a surrogate, a catalytic DNA) with photolyase activity could be contemplated. In vitro selection from a random-sequence DNA pool yielded two DNA enzymes (DNAzymes): Sero1C, which requires serotonin as an obligate cofactor, and UV1C, which is cofactor-independent and optimally uses light of 300-310 nm wavelength to repair cyclobutane thymine dimers within a gapped DNA substrate. Both Sero1C and UV1C show multiple turnover kinetics, and UV1C repairs its substrate with a quantum yield of ∼0.05, on the same order as the quantum yields of certain classes of photolyase enzymes. Intensive study of UV1C has revealed that its catalytic core consists of a guanine quadruplex (G-quadruplex) positioned proximally to the bound substrate's thymine dimer. We hypothesize that electron transfer from photoexcited guanines within UV1C's G-quadruplex is responsible for substrate photoreactivation, analogous to electron transfer to pyrimidine dimers within a DNA substrate from photoexcited flavin cofactors located within natural photolyase enzymes. Though the analogy to evolution is necessarily limited, a comparison of the properties of UV1C and Sero1C, which arose out of the same in vitro selection experiment, reveals that although the two DNAzymes comparably accelerate the rate of thymine dimer repair, Sero1C has a substantially broader substrate repertoire, as it can repair many more kinds of pyrimidine dimers than UV1C. Therefore, the co-opting of an amino acid-like cofactor by a nucleic acid enzyme in this case contributes functional versatility rather than a greater rate enhancement. In recent work on UV1C, we have succeeded in shifting its action spectrum from the UVB into the blue region of the spectrum and determined that although it catalyzes both repair and de novo formation of thymine dimers, UV1C is primarily a catalyst for thymine dimer repair. Our work on photolyase DNAzymes has stimulated broader questions about whether analogous, purely nucleotide-based photoreactivation also occurs in double-helical DNA, the dominant form of DNA in living cells. Recently, a number of different groups have reported that this kind of repair is indeed operational in DNA duplexes, i.e., that there exist nucleotide sequences that actively protect, by way of photoreactivation (rather than by simply preventing their formation), pyrimidine dimers located proximal to them. Nucleotide-based photoreactivation thus appears to be a salient, if unanticipated, property of DNA and RNA. The phenomenon also offers pointers in the direction of how in primordial evolution-in an RNA world-early nucleic acids may have protected themselves from structural and functional damage wrought by ultraviolet light.

Discovery and Biosensing Applications of Diverse RNA-Cleaving DNAzymes.

DNA-based enzymes, or DNAzymes, are not known to exist in Nature but can be isolated from random-sequence DNA pools using test tube selection techniques. Since the report of the first DNAzyme in 1994, many catalytic DNA molecules for catalyzing wide-ranging chemical transformations have been isolated and studied. Our laboratory has a keen interest in searching for diverse DNAzymes capable of cleaving RNA-containing substrates, determining their sequence requirements and structural properties, and examining their potential as biosensors. This Account begins with the description of an accidental discovery on the sequence adaptability of a small DNAzyme known as "8-17", when we performed 16 parallel selections to search for DNAzymes that targeted each and every possible dinucleotide junction of RNA for cleavage. DNAzyme 8-17 dominated all the selection pools targeting purine-containing junctions. In-depth sequence analysis revealed that 8-17 could manifest itself in many sequence options defined by the requirement of four absolutely conserved nucleotides. This study also exposed the fact that 8-17 had poor activity toward pyrimidine-pyrimidine junctions. With this information in hand, we proceeded to the discovery of diverse non-8-17 DNAzymes that exhibited robust catalytic activity under physiological conditions. These DNAzymes were found to universally interact with their substrates through two Watson-Crick binding arms and have a catalytic core of varying length and secondary-structure complexity. RNA-cleaving DNAzymes were also isolated to function at acidic conditions (pH 3-5), and these molecules exhibited intriguing pH profiles, with the highest activity precisely matching the pH used for their selection. Interestingly, these DNAzymes appear to use non-Watson-Crick interactions in defining their structures. More recently, we have embarked on the development of ligand-responsive RNA-cleaving fluorogenic DNAzymes that can recognize specific bacterial pathogens, such as Escherichia coli and Clostridium difficile, using a method that does not require a priori identification of a specific biomarker. Instead, the crude extracellular mixture as a whole is used as the target to drive the DNAzyme isolation. High recognition specificity can be achieved with a double-selection approach in which a DNA library is negatively selected against the cellular mixture prepared from unintended bacteria, followed by positive selection against the same mixture derived from a specific species or strain of bacterial pathogen. Finally, we have shown that DNAzymes' compatibility with DNA replication can benefit the design of amplification mechanisms that uniquely link the action of RNA-cleaving DNAzymes to rolling circle amplification, an isothermal DNA amplification technique. These methods are well suited for translating the target-binding and cleavage activity of an analyte-activated RNA-cleaving DNAzyme into the production of massive amounts of DNA amplicons to achieve ultrahigh detection sensitivity. Given the high chemical stability of DNA, our ability to discover catalytic DNA sequences by simultaneously evaluating as many as 1016 different DNA sequences, the accessibility to diverse RNA-cleaving DNAzymes in a single DNA pool, and the availability of methods for designing simple biosensors that incorporate RNA-cleaving DNAzymes, we believe we are moving closer to employing RNA-cleaving DNAzymes for exciting applications, such as point of care diagnostics or field detection of environmental toxins.

In vitro selection of RNA-cleaving DNAzymes for bacterial detection

DNAzymes refer to single-stranded DNA molecules with catalytic activity and can be isolated from synthetic random-sequence DNA pools using the technique of in vitro selection. DNAzymes that cleave RNA, known as “RNA-cleaving DNAzymes”, represent one of the best-studied classes of DNAzymes and have been widely used for the development of biosensors and bioassays for various analytes. We have been interested in developing RNA-cleaving DNAzymes as bacterial sensors and these DNAzymes are engineered to perform three linked functions: recognition of a bacterial biomarker, RNA cleavage, and fluorescence generation. These fluorogenic DNAzymes emit fluorescence automatically in the presence of a bacterium of interest and can be used to set up a simple “mix-and-read” assay to detect this bacterium. In this article, we will discuss this DNAzyme system and present a proven strategy for isolating highly specific bacteria-responding DNAzyme probes from random-sequence DNA pools. We will also provide an in vitro selection protocol successfully used to derive RNA-cleaving fluorogenic DNAzyme probes that are capable of recognizing a targeted strain of Clostridium difficile.

An Efficient Catalytic DNA that Cleaves L-RNA.

Many DNAzymes have been isolated from synthetic DNA pools to cleave natural RNA (D-RNA) substrates and some have been utilized for the design of aptazyme biosensors for bioanalytical applications. Even though these biosensors perform well in simple sample matrices, they do not function effectively in complex biological samples due to ubiquitous RNases that can efficiently cleave D-RNA substrates. To overcome this issue, we set out to develop DNAzymes that cleave L-RNA, the enantiomer of D-RNA, which is known to be completely resistant to RNases. Through in vitro selection we isolated three L-RNA-cleaving DNAzymes from a random-sequence DNA pool. The most active DNAzyme exhibits a catalytic rate constant ~3 min-1 and has a structure that contains a kissing loop, a structural motif that has never been observed with D-RNA-cleaving DNAzymes. Furthermore we have used this DNAzyme and a well-known ATP-binding DNA aptamer to construct an aptazyme sensor and demonstrated that this biosensor can achieve ATP detection in biological samples that contain RNases. The current work lays the foundation for exploring RNA-cleaving DNAzymes for engineering biosensors that are compatible with complex biological samples.

A simple and rapid approach for measurement of dissociation constants of DNA aptamers against proteins and small molecules via automated microchip electrophoresis

Automated microchip electrophoresis was used as a simple and rapid method to measure effective dissociation constants (K(d,eff)) of aptamers against both large and small molecule targets. Human thrombin, immunoglobulin E (IgE), and adenosine triphosphate (ATP) were selected as model analytes to validate the method, with four ligands including two DNA aptamers for thrombin (two distinct epitopes), an IgE aptamer, and an ATP aptamer. The approach is based on a microchip version of a DNA mobility shift assay. Non-denaturing microchip gel electrophoresis separations of DNA could resolve and quantify unbound from target-bound aptamers when using large molecules as targets. To extend the technique to small molecule targets such as ATP, an aptamer/competitor strategy was used, in which a DNA competitor complementary to the aptamer could be displaced by ATP and electrophoretically resolved. Using an automated microchip electrophoresis platform, parallel separations of 11 titration samples were completed in ~0.5 h. Analytical performance comparisons show that our approach provides significant advantages in minimized reagent consumption (typically tens of pmol of aptamer and target), reduced analysis time, and minimized user interaction when compared to previously reported methods for aptamer K(d) measurement. Moreover, the flexibility and ease of K(d,eff) measurement for aptamers against large and small targets make this a unique and valuable approach that should find widespread use. Finally, the feasibility of using this method during aptamer selection processes (e.g. SELEX) was shown by accurate bulk K(d,eff) measurement of a known thrombin aptamer (THRaptA) spiked into a random-sequence DNA pool at as low as 5.0% (molar %) of the total pool; only ~825 fmol of total binding sequences were needed for an 11-point titration curve.

Characterization of non-8–17 sequences uncovers structurally diverse RNA-cleaving deoxyribozymes

RNA-cleaving deoxyribozymes (DNAzymes) can be isolated from random-sequence DNA pools via the process of in vitro selection. However, small and simple catalytic motifs, such as the 8-17 DNAzyme, are commonly observed in sequence space, presenting a challenge in discovering large and complex DNAzymes. In an effort to investigate underrepresented molecular species derived from in vitro selection, in this study we sought to characterize non-8-17 sequences obtained from a previous in vitro selection experiment wherein the 8-17 deoxyribozyme was the dominant motif. We examined 9 sequence families from 21 motifs by characterizing their structural and functional features. We discovered 9 novel deoxyribozyme classes with large catalytic domains (>40 nucleotides) utilizing three-way or four-way junction structural frameworks. Kinetic studies revealed that these deoxyribozymes exhibit moderate to excellent catalytic rates (k(obs) from 0.003 to 1 min(-1)), compared to other known RNA-cleaving DNAzymes. Although chemical probing experiments, site-directed mutational analyses, and metal cofactor dependency tests suggest unique catalytic cores for each deoxyribozyme, common dinucleotide junction selectivity was observed between DNAzymes with similar secondary structural features. Together, our findings indicate that larger, structurally more complex, and diverse catalytic motifs are able to survive the process of in vitro selection despite a sequence space dominated by smaller and structurally simpler catalysts.

Design, Synthesis, and Amplification of DNA Pools for In Vitro Selection

Preparation of a random-sequence DNA pool is presented. The degree of randomization and the length of the random sequence are discussed, as is synthesis of the pool using a DNA synthesizer or via commercial synthesis companies. Purification of a single-stranded pool and conversion to a double-stranded pool are presented as step-by-step protocols. Support protocols describe determination of the complexity and skewing of the pool, and optimization of amplification conditions.

Design, Synthesis, and Amplification of DNA Pools for In Vitro Selection

Preparation of a random-sequence DNA pool is presented. The degree of randomization and the length of the random sequence are discussed, as is synthesis of the pool using a DNA synthesizer or via commercial synthesis companies. Purification of a single-stranded pool and conversion to a double-stranded pool are presented as step-by-step protocols. Support protocols describe determination of the complexity and skewing of the pool, and optimization of amplification conditions.

In vitro selection, characterization, and application of deoxyribozymes that cleave RNA

Over the last decade, many catalytically active DNA molecules (deoxyribozymes; DNA enzymes) have been identified by in vitro selection from random-sequence DNA pools. This article focuses on deoxyribozymes that cleave RNA substrates. The first DNA enzyme was reported in 1994 and cleaves an RNA linkage. Since that time, many other RNA-cleaving deoxyribozymes have been identified. Most but not all of these deoxyribozymes require a divalent metal ion cofactor such as Mg2+ to catalyze attack by a specific RNA 2′-hydroxyl group on the adjacent phosphodiester linkage, forming a 2′,3′-cyclic phosphate and a 5′-hydroxyl group. Several deoxyribozymes that cleave RNA have utility for in vitro RNA biochemistry. Some DNA enzymes have been applied in vivo to degrade mRNAs, and others have been engineered into sensors. The practical impact of RNA-cleaving deoxyribozymes should continue to increase as additional applications are developed.

Assemblage of signaling DNA enzymes with intriguing metal-ion specificities and pH dependences.

We report a group of new DNA enzymes that possess a synchronized RNA-cleavage/fluorescence-signaling ability and exhibit wide-ranging metal-ion and pH dependences. These DNA catalysts were derived from a random-sequence DNA pool in a two-stage process: (1) establishment of a catalytic DNA population through repetitive rounds of in vitro selection at pH 4.0, and (2) sequence-diversification and catalytic-activity optimization through five parallel paths of in vitro evolution conducted at pH 3.0, 4.0, 5.0, 6.0, and 7.0, respectively. The deoxyribozymes were evolved to cleave the phosphodiester bond of a single ribonucleotide embedded in DNA and flanked immediately by two deoxyribonucleotides modified with a fluorophore and a quencher, respectively--a setting that synchronizes catalysis with fluorescence signaling. The most dominant catalyst from each pool was examined for metal-ion specificity, catalytic efficiency, pH dependence, and fluorescence-signaling capability. Individual catalysts have different metal-ion requirements and can generate as much as a 12-fold fluorescence enhancement upon RNA cleavage. Most of the DNA enzymes have a pH optimum coinciding with the selection pH and exhibit a rate constant approximating 1 min(-)(1) under optimal reaction conditions. The demonstration of DNA enzymes that are functional under extremely high acidity (such as pH 3 and 4) indicates that DNA has the ability to perform efficient catalysis even under harsh reaction conditions. The isolation of many new signaling DNA enzymes with broad pH optima and metal-ion specificities should facilitate the development of diverse deoxyribozyme-based biosensors.

Design, Synthesis, and Amplification of DNA Pools for Construction of Combinatorial Pools and Libraries

This unit describes the design, synthesis, and amplification of random-sequence DNA pools, from which functional nucleic acid-binding or catalytic species can be selected. Since it is an expensive and time-consuming process, the authors have provided an extensive strategic planning section to guide investigators in designing and constructing the pool.

Design, Synthesis, and Amplification of DNA Pools for In Vitro Selection

Preparation of a random-sequence DNA pool is presented. The degree of randomization and the length of the random sequence are discussed, as is synthesis of the pool using a DNA synthesizer. Purification of a single-stranded pool and conversion to a double-stranded pool are presented as step-by-step protocols. Support protocols describe determination of the complexity and skewing of the pool, and optimization of amplification conditions.

Surprising fidelity of template-directed chemical ligation of oligonucleotides.

Nucleic acid replication via oligonucleotide ligation has been shown to be extremely prone to errors. If this is the case, it is difficult to envision how the assembly and replication of short oligonucleotides could have contributed to the origin of life and to the evolution of a putative RNA world. In order to assess the fidelity of oligonucleotide replication more accurately, chemical ligation reactions were performed with constant-sequence DNA templates and random-sequence DNA pools as substrates. In keeping with earlier results, constant-sequence hairpin templates were not faithfully copied by random-sequence substrates. Linear templates, however, showed exceptional replication fidelity, particularly when random hexamers were ligated at 25 degrees C. Surprisingly, at low temperatures the formation of G.A base pairs was common and sometimes occurred even more readily than the formation of the corresponding Watson-Crick A-T and G-C base pairs. The fidelity of ligation reactions increases with temperature and decreases with the length of the random-sequence substrates. Oligonucleotides with a defined sequence can be copied faithfully in the absence of enzymes. Thus, to the extent that short oligonucleotides could readily have been generated by prebiotic mechanisms, it is possible that the earliest self-replicators arose via oligonucleotide ligation.