Radical Ring-opening Copolymerization Research Articles

Functional Degradable Polymers by Radical Ring-Opening Copolymerization of MDO and Vinyl Bromobutanoate: Synthesis, Degradability and Post-Polymerization Modification.

The synthesis of vinyl bromobutanoate (VBr), a new vinyl acetate monomer derivative obtained by the palladium-catalyzed vinyl exchange reaction between vinyl acetate (VAc) and 4-bromobutyric acid is reported. The homopolymerization of this new monomer using the RAFT/MADIX polymerization technique leads to the formation of novel well-defined and controlled polymers containing pendent bromine functional groups able to be modified via postpolymerization modification. Furthermore, the copolymerization of vinyl bromobutanoate with 2-methylene-1,3-dioxepane (MDO) was also performed to deliver a range of novel functional degradable copolymers, poly(MDO-co-VBr). The copolymer composition was shown to be able to be tuned to vary the amount of ester repeat units in the polymer backbone, and hence determine the degradability, while maintaining a control of the final copolymers’ molar masses. The addition of functionalities via simple postpolymerization modifications such as azidation and the 1,3-dipolar cycloaddition of a PEG alkyne to an azide is also reported and proven by 1H NMR spectroscopy, FTIR spectroscopy, and SEC analyses. These studies enable the formation of a novel class of hydrophilic functional degradable copolymers using versatile radical polymerization methods.

Designed enzymatically degradable amphiphilic conetworks by radical ring-opening polymerization

A simple and versatile route for making functional biodegradable amphiphilic conetworks (APCNs) with unique swelling property and excellent enzymatic degradability is presented. The APCNs were made by radical ring-opening copolymerization of cyclic ketene acetal and vinyl cyclopropane derivative.

Functional 2-methylene-1,3-dioxepane terpolymer: a versatile platform to construct biodegradable polymeric prodrugs for intracellular drug delivery

Functional 2-methylene-1,3-dioxepane (MDO) terpolymers were explored here as a versatile platform to construct biodegradable pH sensitive polymeric prodrugs for intracellular drug delivery. A series of MDO-based biodegradable functional polyester P(MDO-co-PEGMA-co-PDSMA) with different compositions were synthesized by terpolymerization of MDO, poly(ethylene glycol) methyl ether methacrylate (PEGMA) and pyridyldisulfide ethylmethacrylate (PDSMA) via a simple one-pot radical ring-opening copolymerization. Mal-DOX, which contains a pH-sensitive hydrazone bond between doxorubicin (DOX) and the maleimide group, was covalently conjugated in one pot to free thiol groups of PDSMA units via thiol–ene click chemistry in the presence of tri(2-carboxyethyl)phosphine (TCEP). The DOX-conjugated P(MDO-co-PEGMA-co-PDSMA) can self-assemble into prodrug micelles. The diameter and morphology of the polymeric prodrug micelles were measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Because of the existence of the pH-sensitive hydrazone bonds, in vitro drug release results showed that the release of DOX was much faster at pH 5.5 than that at pH 7.4. Flow cytometry and fluorescence microscopy demonstrated that the prodrug micelles could be efficiently internalized by cancer cells. In vitro cytotoxicity showed that the DOX-conjugated prodrug micelles can strongly inhibit the proliferation of cancer cells remarkably. Importantly, this work provides a versatile strategy for the fabrication of biodegradable polymeric prodrug nanocarriers.

Influence of cyclodextrin on the solubility of a classically prepared 2-vinylcyclopropane macromonomer in aqueous solution

A macromonomer 5 consisting of a polymerizable vinylcyclopropane end group and a poly(N-isopropylacrylamide) (poly(NiPAAm)) chain was obtained from amidation of 1-ethoxycarbonyl-2-vinylcyclopropane-1-carboxylic acid (4) with an amino-terminated poly(NiPAAm) 3 as an example. This macromonomer 5 showed an LCST effect after complexation of the vinyl end group with ß-cyclodextrin in water. Via radical ring-opening copolymerization of 5 and NiPAAm a graft copolymer 8 with a clouding point of 32 °C was synthesized. The branched unsaturated polymer was treated with ozone to cleave the double bonds of the main chain.

Synthesis of Degradable Materials Based on Caprolactone and Vinyl Acetate Units Using Radical Chemistry

Present studies are carried out with an aim to make degradable materials based on caprolactone and vinyl acetate units using radical chemistry. Radical ring-opening copolymerization of 2-methylene-l,3-dioxepane (MDO) with vinyl acetate in presence of AIBN initiator at 70 °C was carried out to achieve the aim. The copolymerization introduced degradable PCL repeat units onto the C-C backbone of poly(vinyl acetate). Microstructure analysis of the copolymers is done using different ID and 2D NMR techniques. Complete ring-opening polymerization of MDO to give ester units was observed during copolymerizations. Reactivity ratios were found out by Kelen Tudos method and were rVAc = 1.53 and rMDO = 0.47 leading to statistical introduction of ester linkages onto the polymer backbone. The materials showed varied glass transition temperatures (from 37 to −44°C) depending upon the amount of ester linkages and very high elongations. The hydrolysis products were also tested for cytotoxicity studies in L929 cells and compared with that of known and accepted standard materials like poly(ethyleneimine). The hydrolysed products were non toxic and showed a cell viability > 95%. Keeping in view the combined properties like degradability, non-toxicity and low glass transition temperatures, the resulting materials could therefore be proposed for different applications like degradable gums, coatings etc.

“Living” free radical ring-opening copolymerization of 4,7-dimethyl-2-methylene-1,3-dioxepane and conventional vinyl monomers

It is the first report on the atom transfer radical ring-opening copolymerizations of unsaturated cyclic acetal: 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) with conventional vinyl monomers, styrene (St), acrylonitrile (AN) and methyl acrylate (MA) in the presence of ethyl α-bromobutyrate as initiator and CuBr/2,2 ′-bipyridyl as catalyst/ligand at 110 °C. 1H, 13C NMR and IR data show that the copolymerizations of DMMDO with St (or AN or MA) yield the copolymers, poly(DMMDO-co-St) [or poly(DMMDO-co-AN) or poly(DMMDO-co-MA)] with narrow molecular weight distribution, and low content of DMMDO in the copolymers for electron-donor St, higher contents of DMMDO for electron-acceptor AN or MA are observed.

Radical ring-opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2-isopropenyl-3-phenyloxirane and styrene and its functionalization

The radical ring-opening copolymerization of 2-isopropenyl-3-phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1-St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number-average molecular weights (Mn) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1-St) was estimated with the 1H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1-St) with ethylene glycol in the presence of N-chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The Mn value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1-St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000

Radical Ring-Opening Copolymerization of 2-Methylene 1,3-Dioxepane and Methyl Methacrylate: Experiments Originally Designed To Probe the Origin of the Penultimate Unit Effect

Pulsed-laser polymerization experiments were conducted on the copolymerization of 2-methylene 1,3-dioxepane (MDO) and methyl methacrylate (MMA) at 40 °C. Reactivity ratios, based on the terminal mo...

Toward anti-adhesion therapy for microbial diseases

A small library of degradable polyester-like glycopolymers was successfully prepared by the combination of radical ring-opening copolymerization of 2-methylene-1,3-dioxepane as a cyclic ketene acetal (CKA) with vinyl ether (VE) derivatives and a Pd-catalyzed thioglycoconjugation. The resulting thioglycopolymers were formulated into self-stabilized thioglyconanoparticles, which were stable up to 4 months and were enzymatically degraded. Nanoparticles and their degradation products exhibited a good cytocompatibility on two healthy cell lines. Interactions between thioglyconanoparticles and lectins were investigated and highlighted the presence of both specific carbohydrate/lectin interactions and nonspecific hydrophobic interactions. Fluorescent thioglyconanoparticles were also prepared either by encapsulation of Nile red or by the functionalization of the polymer backbone with rhodamine B. Such nanoparticles were used to prove the cell internalization of the thioglyconanoparticles by lung adenocarcinoma (A549) cells, which underlined the great potential of P­(CKA-co-VE) copolymers for biomedical applications.