Radial Views Research Articles

Significant systematic bias of alpha angles measured on MRI compared to various radiographic views in patients with femoroacetabular impingement syndrome.

The aim of this study was to assess the inter-rater reproducibility and inter-method comparability of hip alpha angle measurements on magnetic resonance imaging (MRI)/magnetic resonance arthrography (MRA) and plain radiographs in patients with femoroacetabular impingement syndrome (FAIS). A cross-sectional study of patients who were diagnosed with symptomatic FAIS underwent preoperative MRI/MRA with axial oblique and/or radial plane imagingand had preoperative radiographs with anterior-posterior (AP), 45° Dunnand 90° Dunn views. Alpha angle measurements were performed independently by two musculoskeletal radiologists. Inter-rater reproducibility and inter-method comparability between MRI/MRA images and radiographic views were assessed using the intraclass correlation coefficient (ICC) with 95% confidence interval (CI). Ninety-seven patients were included of whom 93 (95.8%) received axial oblique plane images and 54 (55.6%) had radial plane MRI/MRA images. Inter-rater reproducibility was excellent (ICC > 0.9) for all planes on MRI/MRA and radiographs. MRI/MRA axial oblique images had poor (ICC 0.39, 95% CI [0.09, 0.59]), moderate (ICC 0.57, 95% CI [0.18, 0.75])and moderate (ICC 0.64, 95% CI [0.20, 0.81]) comparability with AP, 45° Dunnand 90° Dunn, respectively. MRI/MRA radial plane images had equivocal (0 included in all CIs) comparability with AP (ICC 0.66), 45° Dunn (ICC 0.35)and 90° Dunn (ICC 0.14) radiographs. On average, alpha angle measurements were significantly higher with radial images and lower with axial oblique images, when compared to all radiographic views (p < 0.05), except axial oblique versus 45° Dunn views, where angles measured on axial oblique were significantly larger. Alpha angle measurements taken on axial oblique MRI/MRA images show moderate comparability to radiographic 45° Dunnand 90° Dunn views despite negative bias to measurements taken on radiographic AP and 45° Dunn view. Larger alpha angles were appreciated on MRI/MRA radial and axial oblique views compared to radiographic views supporting the inclusion of MRI/MRA alpha angle measurements to properly identify deformity. Level II.

Characterizing a learning curve for robotic-assisted bronchoscopy: Analysis of skills acquisition in a high-volume academic center

ObjectiveShape-sensing robotic-assisted bronchoscopy is an emerging technology for the sampling of pulmonary lesions. We seek to characterize the shape-sensing robotic-assisted bronchoscopy learning curve at an academic center. MethodsShape-sensing robotic-assisted bronchoscopy procedures performed by 9 proceduralists at a single institution were analyzed. Cumulative sum analyses were performed to examine diagnostic sampling and procedure time over each operator’s first 50 cases, with the acceptable yield threshold set to 73%. ResultsDuring the study period, 442 patients underwent sampling of 551 lesions. Each operator sampled 61 lesions (interquartile range, 60-63 lesions). Lesion size was 1.90 cm (interquartile range, 1.33-2.80 cm). The median procedure time for single-target cases decreased from 62 minutes during the first 10 cases to 39 minutes after case 40 (P < .001). The overall diagnostic yield was 72% (range, 58%-83%). Six of 9 operators achieved proficiency over the study period. An aggregated cumulative sum analysis of those who achieved competency demonstrated a steep improvement between lesions 1 and 21 and crossing of the competency threshold by lesion 25. Temporal analysis of yield-related lesion characteristics demonstrated that at approximately lesion 20, more challenging lesions were increasingly targeted, as evidenced by smaller target size, higher rates of unfavorable radial endobronchial ultrasound views, and a negative bronchus sign. ConclusionsSkills acquisition in shape-sensing robotic-assisted bronchoscopy is variable. Approximately half of proceduralists become facile with the technology within 25 lesions. After the initial learning phase, operators increasingly target lesions with more challenging features. Overall, these findings can inform certification and competency standards and provide new users with expectations related to performance over time.

Accelerated free-breathing liver fat and quantification using multi-echo stack-of-radial MRI with motion-resolved multidimensional regularized reconstruction: Initial retrospective evaluation.

To improve image quality, mitigate quantification biases and variations for free-breathing liver proton density fat fraction (PDFF) and quantification accelerated by radial k-space undersampling. A free-breathing multi-echo stack-of-radial MRI method was developed with compressed sensing with multidimensional regularization. It was validated in motion phantoms with reference acquisitions without motion and in 11 subjects (6 patients with nonalcoholic fatty liver disease) with reference breath-hold Cartesian acquisitions. Images, PDFF, and maps were reconstructed using different radial view k-space sampling factors and reconstruction settings. Results were compared with reference-standard results using Bland-Altman analysis. Using linear mixed-effects model fitting (p < 0.05 considered significant), mean and SD were evaluated for biases and variations of PDFF and , respectively, and coefficient of variation on the first echo image was evaluated as a surrogate for image quality. Using the empirically determined optimal sampling factor of 0.25 in the accelerated in vivo protocols, mean differences and limits of agreement for the proposed method were [-0.5; -33.6, 32.7] s-1 for and [-1.0%; -5.8%, 3.8%] for PDFF, close to those of a previous self-gating method using fully sampled radial views: [-0.1; -27.1, 27.0] s-1 for and [-0.4%; -4.5%, 3.7%] for PDFF. The proposed method had significantly lower coefficient of variation than other methods (p < 0.001). Effective acquisition time of 64 s or 59 s was achieved, compared with 171 s or 153 s for two baseline protocols with different radial views corresponding to sampling factor of 1.0. This proposed method may allow accelerated free-breathing liver PDFF and mapping with reduced biases and variations.

Optimized quantitative mapping of cardiopulmonary oscillations using hyperpolarized 129 Xe gas exchange MRI: Digital phantoms and clinical evaluation in CTEPH.

The interaction between 129 Xe atoms and pulmonary capillary red blood cells provides cardiogenic signal oscillations that display sensitivity to precapillary and postcapillary pulmonary hypertension. Recently, such oscillations have been spatially mapped, but little is known about optimal reconstruction or sensitivity to artifacts. In this study, we use digital phantom simulations to specifically optimize keyhole reconstruction for oscillation imaging. We then use this optimized method to re-establish healthy reference values and quantitatively evaluate microvascular flow changes in patients with chronic thromboembolic pulmonary hypertension (CTEPH) before and after pulmonary thromboendarterectomy (PTE). A six-zone digital lung phantom was designed to investigate the effects of radial views, key radius, and SNR. One-point Dixon 129 Xe gas exchange MRI images were acquired in a healthy cohort (n = 17) to generate a reference distribution and thresholds for mapping red blood cell oscillations. These thresholds were applied to 10 CTEPH participants, with 6 rescanned following PTE. For undersampled acquisitions, a key radius of was found to optimally resolve oscillation defects while minimizing excessive heterogeneity. CTEPH participants at baseline showed higher oscillation defect + low (32 ± 14%) compared with healthy volunteers (18 ± 12%, p < 0.001). For those scanned both before and after PTE, oscillation defect + low decreased from 37 ± 13% to 23 ± 14% (p = 0.03). Digital phantom simulations have informed an optimized keyhole reconstruction technique for gas exchange images acquired with standard 1-point Dixon parameters. Our proposed methodology enables more robust quantitative mapping of cardiogenic oscillations, potentially facilitating effective regional quantification of microvascular flow impairment in patients with pulmonary vascular diseases such asCTEPH.

Image quality optimization: dynamic contrast-enhanced MRI of the abdomen at 3T using a continuously acquired radial golden-angle compressed sensing acquisition

IntroductionThe image quality of continuously acquired free-breathing Dynamic Contrast-Enhanced (DCE) golden-angle radial Magnetic Resonance Imaging (MRI) of abdomen suffers from motion artifacts and motion-related blurring. We propose a scheme by minimizing patients’ motion status from breathing as well as optimizing the acquiring parameters to improve image quality and diagnostic performance of DCE-MRI with Golden-Angle Radial Sparse Parallel (GRASP) sequence of abdomen.MethodsThe optimization scheme follows two principles: (1) reduce the impact on images from unpredictable and irregulate motions during examination and (2) adjust the sequence parameters to increase the number of radial views in each partition. For the assessment of image quality, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), the severity of radial artifact, the degree of image sharpness, and a visual scoring of image quality with a 5-point scale were assessed.ResultsA total of 64 patients were included in this study before (16 men, 14 women, age: 54.9 ± 17.0) and after (18 men, 16 women, age: 58.6 ± 12.6) the optimization scheme was performed. The results showed that the SNR values of right and left lobe of liver in both plain phase and arterial phase were significantly increased (All P < 0.001) after the GRASP sequence been optimized. Significant improvements in CNR values were observed in the arterial phase (All P < 0.05). The significant differences in scores at each phase for visual scoring of image quality, noise of the right and left lobe of liver, radial artifact, and sharpness indicating that the image quality was significantly improved after the optimization (All P < 0.001).ConclusionOur study demonstrated that the optimized scheme significantly improved the image quality of liver DCE-MRI with GRASP sequence both in plain and arterial phases. The optimized scheme of GRASP sequence could be a superior alternative to conventional approach for the assessment of liver.

Inter- and Intra-Operator Variability of Regularized Backscatter Quantitative Ultrasound for the Characterization of Breast Masses.

Here we report on the intra- and inter-operator variability of the backscatter coefficient (BSC) estimated with a new low-variance quantitative ultrasound (QUS) approach applied to breast lesions in vivo. Radiofrequency (RF) echo signals were acquired from 29 BIRADS 4 and 5 breast lesions in 2 sequential cohorts following 2 imaging protocols: cohort 1) radial and antiradial views, and cohort 2) short- and long-axis views. Protocol 2 was implemented after retraining and discussion on how to improve reproducibility. Each patient was scanned by at least 2 of 3 radiologists; each performed 3 acquisitions with transducer and patient repositioning in between acquisitions. BSC was estimated using a low-variance QUS approach based on regularization. Intra- and inter-operator variability of the intra-lesion median BSC was evaluated with a multifactorial ANOVA test (P-values) and the intraclass correlation coefficient (ICC). Inter-operator variability was only significant in the first protocol (P < .007); ICCinter = .77 (95% CI .71-.82), indicating good inter-operator agreement. In the second protocol, the inter-operator variability was not significant (P > .05) and agreement was excellent (ICCinter = .92 [.89-.94]). In both protocols, the intra-operator variability was not significant. Our findings demonstrate the need for standardizing image acquisition protocols for backscatter-based QUS to reduce inter-operator variability and ensure its successful translation to the characterization of suspicious breast masses.

MP-RAVE: IR-Prepared T1 -Weighted Radial Stack-of-Stars 3D GRE imaging with retrospective motion correction.

To describe an inversion-recovery T1 -weighted radial stack-of-stars 3D gradient echo (GRE) sequence with comparable image quality to conventional MP-RAGE and to demonstrate how the radial acquisition scheme can be utilized for additional retrospective motion correction to improve robustness to head motion. The proposed sequence, named MP-RAVE, has been derived from a previously described radial stack-of-stars 3D GRE sequence (RAVE) and includes a 180° inversion recovery pulse that is generated once for every stack of radial views. The sequence is combined with retrospective 3D motion correction to improve robustness. The effectiveness has been evaluated in phantoms and healthy volunteers and compared to conventional MP-RAGE acquisition. MP-RAGE and MP-RAVE anatomical images were rated "good" to "excellent" in overall image quality, with artifact level between "mild" and "no artifacts", and with no statistically significant difference between methods. During head motion, MP-RAVE showed higher inherent robustness with artifacts confined to local brain regions. In combination with motion correction, MP-RAVE provided noticeably improved image quality during different head motion and showed statistically significant improvement in image sharpness. MP-RAVE provides comparable image quality and contrast to conventional MP-RAGE with improved robustness to head motion. In combination with retrospective 3D motion correction, MP-RAVE can be a useful alternative to MP-RAGE, especially in non-cooperative or pediatric patients.

Evaluation of Enhanced 3D Brain Image Using Ultrashort TE Sequence with Inversion Recovery for Preoperative Examination of Brain Tumor: Phantom Study Compared with MPRAGE

It is important to obtain accurate anatomical information with little distortion in preoperative examination of brain tumors. Using PETRA, which is an ultrashort echo time (UTE) sequence that is less affected by magnetic susceptibility artifacts, we determined the optimal imaging conditions (radial views [RV] and inversion time [TI]) for IR-PETRA using the inversion recovery (IR) method and compared it with MPRAGE. IR-PETRA was found to be slightly inferior to MPRAGE in sharpness under the optimum conditions (RV=100,000 and TI=500 ms), but it was significantly improved by using a high RV value, and SNR and CNR were higher than or equal to MPRAGE. It is suggested that IR-PETRA may be an alternative sequence of MPRAGE in preoperative examination of brain tumors.

Design of an electron cyclotron emission diagnostics suite for COMPASS Upgrade tokamak.

COMPASS Upgrade is a medium size and high field tokamak that is capable of addressing key challenges for reactor grade tokamaks, including power exhaust and advanced confinement scenarios. Electron cyclotron emission will be available among the first diagnostics to provide measurements of high spatial and temporal resolution of electron temperature profiles and electron temperature fluctuation profiles through a radial view. A separate oblique view at 12° from normal will be utilized to study non-thermal electrons. Both the radial and oblique views are envisioned to be located in a wide-angle midplane port, which has dimensions that enable simultaneous hosting of the front-end of their quasi-optical (QO) designs. Each QO design will have an in situ hot calibration source in the front-end to provide standalone and calibrated Te (R,t) measurements. The conceptual design for each QO system, the Gaussian beam analysis, and the details of the diagnostic channels are presented.

An Experimental Study of a 3D Bone Position Estimation System Based on Fluoroscopic Images.

To compare a 3D preoperative planning image and fluoroscopic image, a 3D bone position estimation system that displays 3D images in response to changes in the position of fluoroscopic images was developed. The objective of the present study was to evaluate the accuracy of the estimated position of 3D bone images with reference to fluoroscopic images. Bone positions were estimated from reference points on a fluoroscopic image compared with those on a 3D image. The four reference markers positional relationships on the fluoroscopic image were compared with those on the 3D image to evaluate whether a 3D image may be drawn by tracking positional changes in the radius model. Intra-class correlations coefficients for reference marker distances between the fluoroscopic image and 3D image were 0.98–0.99. Average differences between measured values on the fluoroscopic image and 3D bone image for each marker corresponding to the direction of the bone model were 1.1 ± 0.7 mm, 2.4 ± 1.8 mm, 1.4 ± 0.8 mm, and 2.0 ± 1.6 mm in the anterior-posterior view, ulnar side lateral view, posterior-anterior view, and radial side lateral view, respectively. Marker positions were more accurate in the anterior-posterior and posterior-anterior views than in the radial and ulnar side lateral views. This system helps in real-time comparison of dynamic changes in preoperative 3D and intraoperative fluoroscopy images.

Focus on analytical equipment, spectroscopy, and spectrometry

Focus on analytical equipment, spectroscopy, and spectrometry

Evaluation of Cam Deformity on 3-Dimensional Computed Tomography With the Best-Fit Sphere Technique and the Alpha Angle Marking Method

Background: Three-dimensional computed tomography (3D-CT) is commonly used for the evaluation of cam deformity; however, it does not display the cam border directly. Purpose: To compare the efficacy of the best-fit sphere (BFS) method and the alpha angle marking (AAM) method in 3D-CT evaluation for the cam border. Study Design: Cohort study (Diagnosis); Level of evidence, 3. Methods: Twenty-six cases of cam deformity, confirmed during hip arthroscopy, were included in this study. All patients underwent a CT scan before surgery. Using multiplanar reconstruction, we obtained reformatted CT images of oblique axial, oblique coronal, and radial views. The alpha angle and femoral head-neck offset ratio (hnoR) were measured on the reformatted CT images. The cam area on 3D-CT was displayed in 4 different ways: by importing the markers from the reformatted CT images of the oblique axial view (cam-oa), the oblique coronal view (cam-oc), or the radial view (cam-r) using the AAM method, or by using the BFS method (cam-bfs). The sizes and locations of the displayed cams were compared. Results: All hips in this study had an alpha angle greater than 60° and an hnoR smaller than 0.17. The radial view measured a larger alpha angle and smaller hnoR than the oblique axial and coronal views (P < .05). The areas of cam-oa, cam-oc, cam-r, and cam-bfs were 161.47 ± 27.96, 89.78 ± 19.23, 241.73 ± 34.55, and 329.75 ± 42.73 mm2, respectively, and their medial-to-lateral ranges along the acetabulum (clockface referents) were 12:30 to 03:00, 11:30 to 01:30, 11:30 to 03:00, and 11:00 to 03:30, respectively. Among the 4 displays, cam-bfs had the largest area and medial-to-lateral range (P < .05), and cam-r had the second largest area and range (P < .05). No significant difference in the mean distances from the acetabular rim to the superior border was detected among the 4 displays (P > .05). Conclusion: The cam area displayed by the BFS method on 3D-CT was larger than those evaluated by the AAM method. In the reformatted CT, the sizes and locations of cam deformity differed among the oblique axial, oblique coronal, and radial views, with the radial view showing the greatest area.

Effect of respiratory motion on free-breathing 3D stack-of-radial liver relaxometry and improved quantification accuracy using self-gating.

To develop an accurate free-breathing 3D liver mapping approach and to evaluate it in vivo. A free-breathing multi-echo stack-of-radial sequence was applied in 5 normal subjects and 6 patients at 3 Tesla. Respiratory motion compensation was implemented using the inherent self-gating signal. A breath-hold Cartesian acquisition was the reference standard. Protondensity fat fraction and were measured and compared between radial and Cartesian methods using Bland-Altman plots. The normal subject results were fitted to a linear mixed model (P < .05 considered significant). Free-breathing stack-of-radial without self-gating exhibited signal attenuation in echo images and artifactually elevated apparent values. In the Bland-Altman plots of normal subjects, compared to breath-hold Cartesian, free-breathing stack-of-radial acquisitions of 22, 30, 36, and 44 slices, had mean differences of 27.4, 19.4, 10.9, and 14.7 s-1 with 800 radial views, and they had 18.4, 11.9, 9.7, and 27.7 s-1 with 404 views, which were reduced to 0.4, 0.9, -0.2, and -0.7 s-1 and to -1.7, -1.9, -2.1, and 0.5 s-1 with self-gating, respectively. No substantial protondensity fat fraction differences were found. The linear mixed model showed free-breathing radial results without self-gating were significantly biased by 17.2 s-1 averagely (P = .002), which was eliminated with self-gating (P = .930). Protondensity fat fraction results were not different (P > .234). For patients, Bland-Altman plots exhibited mean differences of 14.4 and 0.1 s-1 for free-breathing stack-of-radial without self-gating and with self-gating, respectively, but no substantial protondensity fat fraction differences. The proposed self-gating method corrects the respiratory motion bias and enables accurate free-breathing stack-of-radial quantification of liver .

Prototype Design of a 700 °C In-Vacuum Blackbody Source for &lt;italic&gt;In Situ&lt;/italic&gt; Calibration of the ITER ECE Diagnostic

Two blackbody sources permanently located within the international thermonuclear experimental reactor (ITER) diagnostic shield module at equatorial port 9 will operate in conjunction with two remotely retractable mirrors to generate and direct blackbody radiation to calibrate the radial and oblique views of the ITER electron cyclotron emission diagnostic. The main calibration requirements include a high-emissivity surface heated to 700 °C or higher, the ability to perform the calibration in high vacuum and in the presence of a magnetic field, and 5000-h operational lifetime over 20 years. Major constraints include a heater current limit of 40 A, no direct fluid cooling to mitigate failure risks, small size to avoid compromising neutron shielding, and adequate structural support to mitigate vibration loads. This paper describes the preliminary design of a hot calibration source supported by analysis and test results of a calibration source test prototype developed to address the calibration source requirements and its constraints.

Subchondral fracture begins from the bone resorption area in osteonecrosis of the femoral head: a micro-computerised tomography study.

For successful joint preservation in osteonecrosis of the femoral head (ONFH), it is important to understand the mechanism of collapse. The purpose of this study was to investigate the initiation of subchondral fracture in ONFH by using micro-CT imaging of the whole femoral head, focusing on the three-dimensional relationship between the subchondral fracture and the bone resorption area. A total of 40 femoral heads from 37 patients retrieved during total hip arthroplasty for stage 3A or 3B ONFH by Japanese Investigation Committee criteria were scanned using micro-CT with a 0.146-mm thickness cuts. We divided the cohort into early and late collapsed stages according to a threshold of 3mm of collapse as measured by micro-CT. According to the analysis on multiple radial plane views in the whole femoral head, there were two interesting findings. First, the initial fracture cracks ran between separated bone resorption areas at the anterosuperior portions of all 18 femoral heads in the early collapsed stage. Second, fractures of the necrotic bone at the sclerotic boundary and a fibrous, granulation-like, low-density tissue along the necrotic side of the sclerotic boundary were seen in 19 of the 22 in the late collapsed stage. After bone resorption around the retinaculum and teres insertion initiates the subchondral fracture, bone resorption expanding at the anterosuperior portion of the femoral head may result in the spread of fracture and the potential for massive collapse. Three-dimensional micro-CT showed bone resorption around the reparative zone initiates the subchondral fracture in ONFH.

Detections of Screw Penetration during Volar Plating for Distal Radius Fractures.

Background We evaluated the detection for screw penetration on the dorsal cortex of the radius in serial oblique, dorsal tangential, and radial groove radiographic views in volar plating fixation. Materials and Methods Eight screw positions were set in each of the four cadaveric radii. Screw 1 was placed in the styloid subregion, whereas screws 2 and 3 were placed just proximal to the styloid and were defined for the radial region of the radius. Screws 4 (distal to the extensor pollicis longus [EPL] groove), 5 (the distal half of the groove), and 6 (the proximal half of the groove) were placed in the central region of the radius. Screws 7 (just medial to the groove) and 8 (sigmoid notch subregion) were positioned in the ulnar region of the radius. The screws were overlengthened by 1 and 2 mm and were evaluated in three radiographic views. Results Penetrations in the radial region were fully visible in supinated oblique views with 1- and 2-mm overlengthened screws. The penetration of screw 4 was clearly observable over a considerable range of views. However, the 1-mm penetration of screw 5 was not detectable at any angle of projection. Detection of the ulnar region screw was the most difficult among the three regions with oblique views. In the dorsal tangential view, the 1-mm penetration of screw 4 was not observed in any of the four radii, but the penetration of screw 5 was detectable in all the radii. The screws 2, 3, 5, 7, and 8 were readily detectable. The screw 4 was barely seen in the radial groove view, while the screws 5 and 6 were readily detectable. Conclusion/Clinical Relevance Appropriate combinations of these well-known radiological views are essential for the overall detection of penetrated screws during plating in distal radius fractures.

Free-Breathing Hepatobiliary Phase Gd-EOB-DTPA-Enhanced MR Imaging with Radial VIBE Sequence: Comparison with Conventional Cartesian VIBE Sequence

Purpose: To assess the feasibility of three-dimensional fat-suppressed T1-weighted gradient-echo sequence with radial volumetric interpolated breath-hold examination (rVIBE) compared with that of conventional Cartesian VIBE (cVIBE) sequence for free-breathing hepatobiliary phase of gadolinium-ethoxybenzyl-diethylenetriaminepentaacetic acid (Gd-EOB-DTPA)-enhanced MR imaging and to investigate the optimal number of radial views for rVIBE. Methods: Thirty patients who underwent hepatobiliary phase Gd-EOB-DTPA-enhanced MR imaging with freebreathing cVIBE and rVIBE sequences using radial views of 256 (rVIBE256), 512 (rVIBE512), and 1024 (rVIBE1024) for the evaluation of suspected liver tumors were enrolled in our study. Signal-to-noise ratios (SNRs) of the liver and image quality were compared between cVIBE and rVIBE sequences using the Steel-Dwass test of post hoc nonparametric multiple comparisons. Results: SNR of the liver was significantly higher for rVIBE with all three radial views than for cVIBE (all, P<0.001). The rVIBE256 showed a significantly lower SNR than rVIBE512 (P=0.004) and rVIBE1024 (P<0.001), but no significant difference was obtained between rVIBE512 and rVIBE1024 (P=0.122). The overall image quality was significantly higher for all rVIBE radial views than for cVIBE (all, P<0.001). The mean score of overall image quality was significantly lower for rVIBE256 than for rVIBE512 and rVIBE1024 (both, P<0.001), and there was no significant difference between rVIBE512 and rVIBE1024 (P=0.902). Conclusions: Our study suggests that rVIBE512 is more feasible in patients with diminished respiratory capacity in the hepatobiliary phase of Gd-EOB-DTPA-enhanced MR imaging.

Update on the status of the ITER ECE diagnostic design

Considerable progress has been made on the design of the ITER electron cyclotron emission (ECE) diagnostic over the past two years. Radial and oblique views are still included in the design in order to measure distortions in the electron momentum distribution, but the oblique view has been redirected to reduce stray millimeter radiation from the electron cyclotron heating system. A major challenge has been designing the 1000 K calibration sources and remotely activated mirrors located in the ECE diagnostic shield module (DSM) in the equatorial port plug #09. These critical systems are being modeled and prototypes are being developed. Providing adequate neutron shielding in the DSM while allowing sufficient space for optical components is also a significant challenge. Four 45-meter long low-loss transmission lines transport the 70–1000 GHz ECE from the DSM to the ECE instrumentation room. Prototype transmission lines are being tested, as are the polarization splitter modules that separate O-mode and X-mode polarized ECE. A highly integrated prototype 200–300 GHz radiometer is being tested on the DIII-D tokamak in the USA. Design activities also include integration of ECE signals into the ITER plasma control system and determining the hardware and software architecture needed to control and calibrate the ECE instruments.

Alpha Angle Measurements in Healthy Adult Volunteers Vary Depending on the MRI Plane Acquisition Used

Background: It has been shown that cam deformities are located at a more anterosuperior location than was previously described. Purpose: To establish, in a large group of asymptomatic participants, the normative range of the alpha angle in the anterosuperior location in both the oblique axial and radial views of magnetic resonance imaging (MRI). Study Design: Cross-sectional study; Level of evidence, 3. Methods: In 197 asymptomatic participants (394 asymptomatic hips) with a mean age of 29.4 years (range, 21.4-50.6 years), T1-weighted MRI scans were studied. The anterosuperior alpha angle measurement was performed by 2 observers using a previously described methodology and also using the radial view. The intraclass correlation coefficient (ICC) was determined for interobserver and intraobserver reliability. Descriptive statistics, the Student t test, correlation studies, and the Bland-Altman technique were used for data analysis. Results: The ICC for interobserver and intraobserver reproducibility was 0.74 (good agreement) and 0.84 (very good agreement), respectively. Anterosuperiorly, the mean (±SD) alpha angles in the oblique axial and radial views were 45.11° ± 8.52° and 50.30° ± 7.91°, respectively (P < .0001). The upper limits of the 95% reference interval for the oblique axial and radial views were 63° and 66°, respectively. In the oblique axial view, the mean (±SD) alpha angle for male participants was 48.3° ± 7.5° compared with 42.6° ± 6.2° for female participants (P < .0001), and in the radial view, it was 53.0° ± 7.1° compared with 48.1° ± 5.6°, respectively (P < .0001). Linear regression analysis demonstrated an insignificant relationship between age and alpha angle, regardless of the imaging plane (r2 = 0.06). Conclusion: We suggest using a higher threshold of 63° (in the oblique axial view) and 66° (in the radial view) at the 1:30 clockface position for the diagnosis of a cam-type deformity. This is significantly higher than 50° to 55° at the 3-o’clock position traditionally used based on the oblique axial view that has been initially described.

Focus on test, measurement, and analytical equipment

Focus on test, measurement, and analytical equipment