Radial Distribution Of Dust Research Articles

An Outbursting Protostar: The Environment of L1251 VLA 6

Young protostars that undergo episodic accretion can provide insight into the impact on their circumstellar environments while matter is accreted from the disk onto the protostar. IRAS 22343+7501 is a four-component protostar system with one of those being a fading outbursting protostar, which was obseved with the Karl G. Jansky Very Large Array (VLA) and is referred to as L1251 VLA 6. Given the rarity of young stellar objects undergoing this type of accretion, L1251 VLA 6 can elucidate the fading phase of the post-outburst process. Here, we examine structure in the disk around L1251 VLA 6 at frequencies of 10 and 33 GHz with the VLA. We model the disk structure using Markov Chain Monte Carlo (MCMC). This method is then combined with a parametric ray-tracing code to generate synthetic model images of an axisymmetric disk, allowing us to characterize the radial distribution of dust in the system. The results of our MCMC fit show that the most probable values for the mass and radius are consistent with values typical of Class I objects. We find that the total mass of the disk is 0.070−0.2+0.031M☉ and investigate the conditions that could cause the accretion outburst. We conclude that the eruption is not caused by gravitational instability and consider alternative explanations and trigger mechanisms.

Debris rings from extrasolar irregular satellites

ABSTRACT Irregular satellites are the minor bodies found orbiting all four Solar system giant planets, with large semimajor axes, eccentricities, and inclinations. Previous studies have determined that the Solar system’s irregular satellites are extremely collisionally evolved populations today, having lost ∼99 per cent of their initial mass over the course of hundreds of Myr. Such an evolution implies that the irregular satellites must have produced a population of dusty collisional debris in the past, which is potentially observable due to the resulting reprocessing of stellar light. In this paper, we examine the signatures of the debris discs produced by extrasolar analogues of this process. Radiation pressure, quantified by the parameter β, is the driving force behind the liberation of dust grains from the planetary Hill sphere, and results in the formation of circumstellar dust rings, even in the absence of an underlying belt of asteroids in the system. Our simulated discs reproduce many of the same features seen in some classes of observed debris discs, such as thin ring morphology, a large blowout size, and azimuthal symmetry. We compare our simulated discs’ radial profiles to those of the narrow dust rings observed around Fomalhaut and HR 4796A, and show that they can broadly reproduce the observed radial distribution of dust.

A Potential Site for Wide-orbit Giant Planet Formation in the IM Lup Disk

The radial transport, or drift, of dust has taken a critical role in giant planet formation theory. However, it has been challenging to identify dust drift pileups in the hard-to-observe inner disk. We find that the IM Lup disk shows evidence that it has been shaped by an episode of dust drift. Using radiative transfer and dust dynamical modeling we study the radial and vertical dust distribution. We find that high dust drift rates exceeding 110 M ⊕ Myr−1 are necessary to explain both the dust and CO observations. Furthermore, the bulk of the large dust present in the inner 20 au needs to be vertically extended, implying high turbulence (α z ≳ 10−3) and small grains (0.2–1 mm). We suggest that this increased level of particle stirring is consistent with the inner dust-rich disk undergoing turbulence triggered by the vertical shear instability. The conditions in the IM Lup disk imply that giant planet formation through pebble accretion is only effective outside of 20 au. If such an early, high-turbulence inner region is a natural consequence of high dust drift rates, then this has major implications for understanding the formation regions of giant planets including Jupiter and Saturn.

Dust evolution with MUPPI in cosmological volumes

ABSTRACT We study the evolution of dust in a cosmological volume using a hydrodynamical simulation in which the dust production is coupled with the MUPPI (MUlti Phase Particle Integrator) sub-resolution model of star formation and feedback. As for the latter, we keep as reference the model setup calibrated previously to match the general properties of Milky Way-like galaxies in zoom-in simulations. However, we suggest that an increase of the star formation efficiency with the local dust-to-gas ratio would better reproduce the observed evolution of the cosmic star formation density. Moreover, the paucity of quenched galaxies at low redshift demands a stronger role of active galactic nucleus feedback. We tune the parameters ruling direct dust production from evolved stars and accretion in the interstellar medium to get scaling relations involving dust, stellar mass and metallicity in good agreement with observations. In low-mass galaxies, the accretion process is inefficient. As a consequence, they remain poorer in silicate and small grains than higher mass ones. We reproduce reasonably well the few available data on the radial distribution of dust outside the galactic region, supporting the assumption that the dust and gas dynamics are well coupled at galactic scales.

Eccentric Dust-ring Formation in Kozai–Lidov Gas Disks

Abstract A highly misaligned gas disk around one component of a binary star system can undergo global Kozai–Lidov (KL) oscillations for which the disk inclination and eccentricity are exchanged. With hydrodynamical simulations of a gas and dust disk we explore the effects of these oscillations on the dust density distribution. For dust that is marginally coupled to the gas (St ≈ 1), we find that the dust undergoes dynamical behavior similar to that of the gas disk but the radial distribution of dust may be very different from that of the gas. The inward radial drift of the dust is faster in an eccentric disk leading to a smaller outer dust disk radius. The dust breaks into multiple narrow eccentric rings during the highly eccentric disk phase. Eccentric dust-ring formation may have significant implications for the formation of planets in misaligned disks. We suggest that multiple dust rings may generally occur within gas disks that have sufficiently strong eccentricity peaks at intermediate radii.

Segregation of dockage and foreign materials in wheat during loading into a 10-m diameter corrugated steel bin

Segregation of dockage and foreign materials (DFM) is an unavoidable phenomenon in bulk grain and causes many problems. In this study, distributions of DFM, and shrunken and broken kernels (SBK) were determined during loading of wheat in a 10-m diameter flat-bottom cylindrical bin. Wheat was loaded through a vertical funnel (spout) into the bin from five drop heights (1.6, 2.5, 3.4, 4.3 and 5.2 m). Samples were collected using a sampling tube (29 cm diameter and 50 cm deep) inserted vertically at five locations (0.00, 1.25, 2.50, 3.75 and 5.00 m of horizontal distances from the center) along three radii of the bin for each drop height. The impurities from each collected sample were divided into five categories with different sizes (other grains, other particles, SBK, fine particles, and dust and fragments) by sieving analyses. Impurities larger and smaller than wheat kernels were categorized as large and small impurities, respectively. Drop height significantly influenced the radial distribution of fine particles, dust and fragments, but not the distribution of other grains and other particles. Fine particles and dust and fragments mainly accumulated in the center, while SBK accumulated mostly near the wall of the bin. Both true density and apparent test weight (bulk density) of unclean wheat and test weight of clean wheat significantly changed along the radius of bin. Apparent test weight of unclean wheat was minimum in the center and close to the wall of bin. Drop height did not influence true density and apparent test weight of clean and unclean wheat. Thousand kernel weight, dimensions, and sphericity of wheat kernels were similar at different radial locations of bin for all drop heights. This study can be used as a reference for further studies on grain handling and associated effects on grain grading system and design of aeration, drying, and insect control. .

Dust settling and rings in the outer regions of protoplanetary discs subject to ambipolar diffusion

Context. Magnetohydrodynamic (MHD) turbulence plays a crucial role in the dust dynamics of protoplanetary discs. It affects planet formation, vertical settling, and is one possible origin of the large scale axisymmetric structures, such as rings, recently imaged by ALMA and SPHERE. Among the variety of MHD processes in discs, the magnetorotational instability (MRI) has raised particular interest since it provides a source of turbulence and potentially organizes the flow into large scale structures. However, the weak ionization of discs prevents the MRI from being excited beyond 1 AU. Moreover, the low velocity dispersion observed in CO and strong sedimentation of millimetre dust measured in T-Tauri discs are in contradiction with predictions based on ideal MRI turbulence. Aims. In this paper, we study the effects of non-ideal MHD and magnetized winds on the dynamics and sedimentation of dust grains. We consider a weakly ionized plasma subject to ambipolar diffusion characterizing the disc outer regions (≫1 AU). Methods. To compute the dust and gas motions, we performed numerical MHD simulations in the stratified shearing box, using a modified version of the PLUTO code. We explored different grain sizes from micrometre to few centimetres and different disc vertical magnetizations with plasma beta ranging from 103 to 105. Results. Our simulations show that the mm-cm dust is contained vertically in a very thin layer, with typical heightscale ≲0.4 AU at R = 30 AU, compatible with recent ALMA observations. Horizontally, the grains are trapped within the pressure maxima (or zonal flows) induced by ambipolar diffusion, leading to the formation of dust rings. For micrometre grains and strong magnetization, we find that the dust layer has a size comparable to the disc heightscale H. In this regime, dust settling cannot be explained by a simple 1D diffusion theory but results from a large scale 2D circulation induced by both MHD winds and zonal flows. Conclusions. Our results suggest that non-ideal MHD effects and MHD winds associated with zonal flows play a major role in shaping the radial and vertical distribution of dust in protoplanetary discs. Leading to effective accretion efficiency α ≃ 10−3–10−1, non-ideal MHD models are also a promising avenue to reconcile the low turbulent activity measured in discs with their relatively high accretion rates.

The Emission and Distribution of Dust of the Torus of NGC 1068

Abstract We present observations of NGC 1068 covering the 19.7–53.0 μm wavelength range using FORCAST and HAWC+ on board SOFIA. Using these observations, high-angular-resolution infrared (IR) and submillimeter observations, we find an observational turnover of the torus emission in the 30–40 μm wavelength range with a characteristic temperature of 70–100 K. This component is clearly different from the diffuse extended emission in the narrow line and star formation regions at 10–100 μm within the central 700 pc. We compute 2.2–432 μm 2D images using the best inferred clumpy torus model based on several nuclear spectral energy distribution (SED) coverages. We find that when 1–20 μm SED is used, the inferred result gives a small torus size (<4 pc radius) and a steep radial dust distribution. The computed torus using the 1–432 μm SED provides comparable torus sizes, pc radius, and morphology to the recently resolved 432 μm Atacama Large Millimeter Array observations. This result indicates that the 1–20 μm wavelength range is not able to probe the full extent of the torus. The characterization of the turnover emission of the torus using the 30–60 μm wavelength range is sensitive to the detection of cold dust in the torus. The morphology of the dust emission in our 2D image at 432 μm is spatially coincident with the cloud distribution, while the morphology of the emission in the 1–20 μm wavelength range shows an elongated morphology perpendicular to the cloud distribution. We find that our 2D clumpy torus image at 12 μm can produce comparable results to those observed using IR interferometry.

Radial distribution of dust, stars, gas, and star-formation rate in DustPedia face-on galaxies

The purpose of this work is the characterization of the radial distribution of dust, stars, gas, and star-formation rate (SFR) in a sub-sample of 18 face-on spiral galaxies extracted from the DustPedia sample. This study is performed by exploiting the multi-wavelength, from UV to sub-mm bands, DustPedia database, in addition to molecular (12CO) and atomic (HI) gas maps and metallicity abundance information available in the literature. We fitted the surface brightness profiles of the tracers of dust and stars, the mass surface density profiles of dust, stars, molecular gas, and total gas, and the SFR surface density profiles with an exponential curve and derived their scale-lengths. We also developed a method to solve for the CO-to-H2 conversion factor (alpha_CO) per galaxy by using dust and gas mass profiles. Although each galaxy has its own peculiar behaviour, we identified a common trend of the exponential scale-lengths vs. wavelength. On average, the scale-lengths normalized to the B-band 25 mag/arcsec^2 radius decrease from UV to 70 micron, from 0.4 to 0.2, and then increase back up to 0.3 at 500 microns. The main result is that, on average, the dust mass surface density scale-length is about 1.8 times the stellar one derived from IRAC data and the 3.6 micron surface brightness, and close to that in the UV. We found a mild dependence of the scale-lengths on the Hubble stage T: the scale-lengths of the Herschel bands and the 3.6 micron scale-length tend to increase from earlier to later types, the scale-length at 70 micron tends to be smaller than that at longer sub-mm wavelength with ratios between longer sub-mm wavelengths and 70 micron that decrease with increasing T. The scale-length ratio of SFR and stars shows a weak increasing trend towards later types.

The Herschel exploitation of local galaxy Andromeda (HELGA) – V. Strengthening the case for substantial interstellar grain growth

In this paper we consider the implications of the distributions of dust and metals in the disc of M31. We derive mean radial dust distributions using a dust map created from Herschel images of M31 sampling the entire far-infrared (FIR) peak. Modified blackbodies are fit to approximately 4000 pixels with a varying, as well as a fixed, dust emissivity index (beta). An overall metal distribution is also derived using data collected from the literature. We use a simple analytical model of the evolution of the dust in a galaxy with dust contributed by stellar sources and interstellar grain growth, and fit this model to the radial dust-to-metals distribution across the galaxy. Our analysis shows that the dust-to-gas gradient in M31 is steeper than the metallicity gradient, suggesting interstellar dust growth is (or has been) important in M31. We argue that M31 helps build a case for cosmic dust in galaxies being the result of substantial interstellar grain growth, while the net dust production from stars may be limited. We note, however, that the efficiency of dust production in stars, e.g., in supernovae (SNe) ejecta and/or stellar atmospheres, and grain destruction in the interstellar medium (ISM) may be degenerate in our simple model. We can conclude that interstellar grain growth by accretion is likely at least as important as stellar dust production channels in building the cosmic dust component in M31.

On the dust abundance gradients in late-type galaxies - I. Effects of destruction and growth of dust in the interstellar medium

We present basic theoretical constraints on the effects of destruction by supernovae (SNe) and growth of dust grains in the interstellar medium (ISM) on the radial distribution of dust in late-type galaxies. The radial gradient of the dust-to-metals ratio is shown to be essentially flat (zero) if interstellar dust is not destroyed by SN shock waves and all dust is produced in stars. If there is net dust destruction by SN shock waves, the dust-to-metals gradient is flatter than or equal to the metallicity gradient (assuming the gradients have the same sign). Similarly, if there is net dust growth in the ISM, then the dust-to-metals gradient is steeper than or equal to the metallicity gradient. The latter result implies that if dust gradients are steeper than metallicity gradients, i.e., the dust-to-metals gradients are not flat, then it is unlikely dust destruction by SN shock waves is an efficient process, while dust growth must be a significant mechanism for dust production. Moreover, we conclude that dust-to-metals gradients can be used as a diagnostic for interstellar dust growth in galaxy discs, where a negative slope indicates dust growth.

On the dust abundance gradients in late-type galaxies - II. Analytical models as evidence for massive interstellar dust growth in SINGS galaxies

We use simple analytical models of the build up of the dust component and compare these with radial dust distributions derived from observations of SINGS galaxies. The observations show that dust gradients are indeed typically steeper than the corresponding metallicity gradients and our models indicate very little dust destruction, but significant dust growth in the ISM for most of these galaxies. Hence, we conclude that there is evidence for significant non-stellar dust production, and little evidence for dust destruction due to SNe shock waves. We find that dust is reprocessed rather than destroyed by shocks from SNe. Finally, we argue that dust abundances derived using standard methods may be overestimated, since even very 'generous' estimates of the metallicity results in dust-to-metals ratios above unity in several cases, if the dust abundances given in the literature are taken at face value.

A dual-frequency sub-arcsecond study of proto-planetary disks at mm wavelengths: first evidence for radial variations of the dust properties

(Abridged) We attempt to characterize the radial distribution of dust in disks around a sample of young stars from an observational point of view, and, when possible, in a model-independent way, by using parametric laws. We used the IRAM PdBI interferometer to provide very high angular resolution (down to 0.4" in some sources) observations of the continuum at 1.3 mm and 3 mm around a sample of T Tauri stars in the Taurus-Auriga region. The sample includes single and multiple systems, with a total of 23 individual disks. We used track-sharing observing mode to minimize the biases. We fitted these data with two kinds of models: a "truncated power law" model and a model presenting an exponential decay at the disk edge ("viscous" model). ect evidence for tidal truncation is found in the multiple systems. The temperature of the mm-emitting dust is constrained in a few systems. Unambiguous evidence for large grains is obtained by resolving out disks with very low values of the dust emissivity index Beta. In most disks that are sufficiently resolved at two different wavelengths, we find a radial dependence of Beta, which appears to increase from low values (as low as 0) at the center to about 1.7 -- 2 at the disk edge. The same behavior could apply to all studied disks. It introduces further ambiguities in interpreting the brightness profile, because the regions with apparent Beta = 0 can also be interpreted as being optically thick when their brightness temperature is high enough. Despite the added uncertainty on the dust absorption coefficient, the characteristic size of the disk appears to increase with a higher estimated star age. These results provide the first direct evidence of the radial dependence of the grain size in proto-planetary disks.

The dusty heart of nearby active galaxies

The dusty environments (= "dust tori'') of AGN are now in reach of observations. Following our paper I on ground-based mid-IR spectro-photometry (H\"onig et al. 2010), we present an upgrade to our radiative transfer model of 3-dimensional clumpy dust tori. The upgrade with respect to H\"onig et al. (2006) concerns an improved handling of the diffuse radiation field in the torus which is approximated by a statistical approach. The models are presented as tools to translate classical and interferometric observations into characteristic properties of the dust distribution. We compare model SEDs for different chemical and grain-size compositions of the dust and find that clouds with standard ISM dust and optical depth tau_V~50 appear in overall agreement with observed IR SEDs. By studying parameter dependencies, it is shown that type 1 AGN SEDs, in particular the mid-IR spectral index, can be used to constrain the radial dust cloud distribution power-law index 'a', while other parameters are more difficult to assess using SEDs only. Interferometry adds important additional information for modeling when interpreted simultaneously with the SED. Although type 2 AGN can, in principle, be used to constrain model parameters as well, obscuration effects make the analysis more ambiguous. We propose a simple, interferometry-based method to distinguish between "compact'' and "extended'' radial dust distributions without detailed modeling of the data and introduce a way to easily determine individual or sample average model parameters using the observed optical depth in the silicate feature and the mid-IR spectral index.

Observable signatures of dust evolution mechanisms which shape the planet forming regions

AbstractOverdensity of dust with respect to the gas in the planet forming regions is a crucial prerequisite to form larger bodies and eventually planets. We use a state-of-the-art code to simulate dust evolution processes in gas-rich circumstellar discs, including the viscous gas evolution. We find significant deviations of the radial distribution of dust from that of the gas as early as 1-2Myr. These deviations are closely related to the efficiency of grain growth. Apparent discrepancies between dust and gas distributions are suggested by the current millimetre interferometer observations, and ALMA will allow us tointerpret any such discrepancies in the context of dust evolution.

The dusty heart of nearby active galaxies

We present 8-13 micron imaging and spectroscopy of 9 type 1 and 10 type 2 AGN obtained with the VLT/VISIR instrument at spatial resolution <100 pc. The emission from the host galaxy sources is resolved out in most cases. The silicate absorption features are moderately deep and emission features are shallow. We compare the mid-IR luminosities to AGN luminosity tracers and found that the mid-IR radiation is emitted quite isotropically. In two cases, IC5063 and MCG-3-34-64, we find evidence for extended dust emission in the narrow-line region. We confirm the correlation between observed silicate feature strength and Hydrogen column density recently found in Spitzer data. In a further step, our 3D clumpy torus model has been used to interpret the data. We show that the strength of the silicate feature and the mid-IR spectral index can be used to get reasonable constraints on the dust distribution in the torus. The mid-IR spectral index, alpha, is almost exclusively determined by the radial dust distribution power-law index, a, and the silicate feature depth is mostly depending on the average number of clouds, N0, along an equatorial line-of-sight and the torus inclination. A comparison of model predictions to our type 1 and type 2 AGN reveals typical average parameters a=-1.0+/-0.5 and N0=5-8, which means that the radial dust distribution is rather shallow. As a proof-of-concept of this method, we compared the model parameters derived from alpha and the silicate feature to more detailed studies of IR SEDs and interferometry and found that the constraints on a and N0 are consistent. Finally, we might have found evidence that the radial structure of the torus changes from low to high AGN luminosities towards steeper dust distributions, and we discuss implications for the IR size-luminosity relation. (abridged)

Analysis of the infrared spectra of the peculiar post-AGB stars EP Lyrae and HD 52961

Aim: We aim to study in detail the peculiar mineralogy and structure of the circumstellar environment of two binary post-AGB stars, EPLyr and HD52961. Both stars were selected from a larger sample of evolved disc sources observed with Spitzer and show unique solid-state and gas features in their infrared spectra. Moreover, they show a very small infrared excess in comparison with the other sample stars. Methods: The different dust and gas species are identified on the basis of high-resolution Spitzer-IRS spectra. We fit the full spectrum to constrain grain sizes and temperature distributions in the discs. This, combined with our broad-band spectral energy distribution and interferometric measurements, allows us to study the physical structure of the disc, using a self-consistent 2D radiative-transfer disc model. Results: We find that both stars have strong emission features due to CO_2 gas, dominated by ^{12}C^{16}O_2, but with clear ^{13}C^{16}O_2 and even ^{16}O^{12}C^{18}O isotopic signatures. Crystalline silicates are apparent in both sources but proved very hard to model. EP Lyr also shows evidence of mixed chemistry, with emission features of the rare class-C PAHs. Whether these PAHs reside in the oxygen-rich disc or in a carbon-rich outflow is still unclear. With the strongly processed silicates, the mixed chemistry and the low ^{12}C/^{13}C ratio, EP Lyr resembles some silicate J-type stars, although the depleted photosphere makes nucleosynthetic signatures difficult to probe. We find that the disc environment of both sources is, to a first approximation, well modelled with a passive disc, but additional physics such as grain settling, radial dust distributions, and an outflow component must be included to explain the details of the observed spectral energy distributions in both stars.

Model infrared spectra of passively heated proto-planetary disks surrounding intermediate-mass pre-main-sequence stars

Aims. We study theoretical spectra at mid-infrared (5−40 μm) wavelengths of proto-planetary disks surrounding intermediate-mass pre-main-sequence stars. Observations show a wide range of spectral shapes and a rich variety in strength and shape of dust resonances. These strong variations in spectral shape reflect differences in the nature and spatial distribution of dust particles in the disk. The aim of this study is to establish what model parameters influence the mid-IR spectra of planet-forming disks. Methods. A grid of models of passively heated proto-planetary disks is used to calculate the infrared spectrum. We use hydrostatic equilibrium disk models and radiative transfer to calculate the emerging spectrum. We focus on the effects that different disk geometries (flaring, self-shadowed) and dust mineralogy have on the emerging 5−40 μm spectrum. We adopt four scenarios for the radial and vertical distribution of crystalline silicate dust. Results. In our model, the 23.5 μm forsterite band is more sensitive to emission from regions 5 percent) of crystalline silicates at a long distance from the star (>20−50 AU) show detectable emission in the 33.5 μm forsterite band. The carbon-dust abundance affects the strength of the dust resonances in the 10 μm spectral region, but not in the 30 μm region.

Dust ring formation due to ice sublimation of radially drifting dust particles under the Poynting–Robertson effect in debris disks

In a disk with a low optical depth, dust particles drift radially inward by the Poynting–Robertson (P-R) drag rather than are blown out by stellar radiation pressure following destructive collisions. We investigate the radial distribution of icy dust composed of pure ice and refractory materials in dust-debris disks taking into account the P-R drag and ice sublimation. We find that icy dust particles form a dust ring by their pile-ups at the edge of their sublimation zone, where they sublime substantially at the temperature 100–110 K. The distance of the dust ring is 20–35 AU from the central star with its luminosity L ⋆ ≲ 30 L ⊙ and 65 ( L ⋆ / 100 L ⊙ ) 1 / 2 AU for L ⋆ ≳ 30 L ⊙ , where L ⊙ is the solar luminosity. The effective optical depth is enhanced by a factor of 2 for L ⋆ ≲ 100 L ⊙ and more than 10 for L ⋆ ≳ 100 L ⊙ . The optical depth of the outer icy dust disk exceeds that of the inner disk filled with refractory particles, namely, the residue of ice sublimation, which are further subjected to the P-R effect. As a result, an inner hole is formed inside the sublimation zone together with a dust ring along the outer edge of the hole.

The distribution of atomic gas and dust in nearby galaxies - III. Radial distributions and metallicity gradients

The radial distribution of dust and gas in 38 nearby galaxies is investigated, using a sample of galaxies for which matched resolution (25 arcsec) neutral hydrogen (H i) and 850-μm images are available. Most of these radial profiles are fitted well by an exponential model, and the derived 850-μm scalelengths are proportional to the H i scalelengths. From this relation, it is found that the metallicity gradients of these galaxies are much shallower than previous studies, unless the dust temperature is constant within the disc, or a significant component of molecular gas exists at large radii that is not traced by CO observations.