Rabbit Skin Irritation Research Articles

In vitro and in vivo burn healing study of standardized propolis: Unveiling its antibacterial, antioxidant and anti-inflammatory actions in relation to its phytochemical profiling.

Natural propolis has been used since decades owing to its broad-spectrum activities. Burn injuries are a global health problem with negative impacts on communities. Bacterial infections usually accompany burns, which demand implementation of antibiotics. Antibiotics abuse led to emergence of microbial drug resistance resulting in poor treatment outcomes. In such instances, the promising alternative would be natural antimicrobials such as propolis. Full chemical profiling of propolis and evaluation of in vitro antibacterial, antioxidant and anti-inflammatory activities as well as in vivo burn healing properties. Chemical profiling of propolis was performed using Liquid chromatography (UHPLC/MS-PDA and HPLC-PDA). In vitro assessment was done using Disc Diffusion susceptibility test against Staphylococcus aureus and infected burn wound mice model was used for in vivo assessment. In vitro antioxidant properties of propolis were assessed using DPPH, ABTS and FRAP techniques. The anti-inflammatory effect of propolis was assessed against lipopolysaccharide/interferon-gamma mediated inflammation. UHPLC/MS-PDA results revealed identification of 71 phytochemicals, mainly flavonoids. Upon flavonoids quantification (HPLC-PDA), Pinocembrin, chrysin and galangin recorded high content 21.58±0.84, 22.73±0.68 and 14.26±0.70 mg/g hydroalcoholic propolis extract, respectively. Propolis showed concentration dependent antibacterial activity in vitro and in vivo burn healing via wound diameter reduction and histopathological analysis without signs of skin irritation in rabbits nor sensitization in guinea pigs. Propolis showed promising antioxidant IC50 values 46.52±1.25 and 11.74±0.26 μg/mL whereas FRAP result was 445.29±29.9 μM TE/mg. Anti-inflammatory experiment results showed significant increase of Toll-like receptor 4 (TLR4), interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-α) mRNA levels. Nitric oxide and iNOS were markedly increased in Griess assay and western blot respectively. However, upon testing propolis against LPS/IFN-γ-mediated inflammation, TLR4, IL-6 and TNF-α expression were downregulated at transcriptional and post-transcriptional levels. Propolis proved to be a promising natural burn healing agent through its antibacterial, antioxidant and anti-inflammatory activities.

Development of a hydrogel containing bisabolol-loaded nanocapsules for the treatment of atopic dermatitis in a Balb/c mice model

α-Bisabolol (αBIS), a plant-derived compound with anti-inflammatory properties, is potentially a therapeutic agent for Atopic dermatitis. However, its poor water solubility and photoinstability limit its topical application. Therefore, the present study, aimed to develop cationic polymeric nanocapsules of αBIS to improve its skin delivery, photostability, and therapeutic efficacy. The αBIS-loaded nanocapsules were prepared using the solvent displacement technique. A Box-Behnken (BB) design was employed to statistically optimize formulation variables and αBIS-loaded nanocapsules characterized by particle size, surface charge and encapsulation efficiency. The optimal formulation was selected, and the spherical shape of the nanocapsules was confirmed by scanning electron microscopy (SEM). Furthermore, hydrogel containing αBIS-loaded nanocapsules was prepared by thickening of nanocapsule suspension with Carbopol 934 and evaluated for rheology, in vitro drug release and skin permeation. Furthermore, a mice model of atopic dermatitis was used to evaluate the anti-inflammatory potential of the hydrogels. The optimal formulation displayed a spherical morphology under scanning electron microscopy (SEM) with an optimum particle size of 133.00 nm, polydispersity index (PDI) of 0.12, high EE% of 93 %, and improved optical stability of αBIS in the prepared nanocapsules compared to the free drug. The nano-based hydrogels demonstrated non-Newtonian pseudoplastic behavior and an increased αBIS in vitro release profile without causing skin irritation in rabbits. Drug retention within the dermis and epidermis layers significantly surpassed that of drug-free hydrogel. Moreover, in vivo histopathological studies and myeloperoxidase (MPO) enzyme activity, revealed that hydrogel containing bisabolol nanocapsules exhibited The best anti-inflammatory effect. The results showed that hydrogels containing bisabolol nanocapsules markedly alleviated dermatitis-related inflammation and reduced skin thickness in Balb/c mice. Our findings support nanocapsules as an effective drug delivery system to enhance αBIS stability, bioavailability, and therapeutic efficacy in AD treatment.

Mechanically Durable Superhydrophobic Strain Sensors with High Biocompatibility and Sensing Performance for Underwater Motion Monitoring.

Much progress has been made toward the development of wearable flexible strain sensors with high sensing performance to monitor human motion, but continuous function in harsh aqueous environments remains a significant challenge. A promising strategy has been the design of sensors with highly durable superhydrophobicity and maintenance of unique sensing properties. Herein, an extremely durable superhydrophobic strain sensor with an ultrawide sensing range was simply fabricated by directly brushing conductive carbon black nanoparticles (CBNPs) onto an elastic silicone rubber sheet (SS) with poly(dimethylsiloxane) (PDMS) coatings (i.e., SS/PDMS-CBNPs sensors). First, this method avoided the use of toxic solvents and a conventional prestretching treatment. Second, considering the easily destroyed rough structures and surface chemistry for conventional superhydrophobic sensors during practical applications, the prepared SS/PDMS-CBNP sensors showed excellent mechanical durability of both superhydrophobicity and sensing as examined by harsh abrasion (300 cycles), stretching (up to 200%), and ultrasonication (40 min) treatments. Third, the prepared superhydrophobic strain sensor exhibited high sensitivity (gauge factor of 101.75), high stretchability (0.015-460%), low hysteresis (83 ms), and long-term stability (10000 cycles). Fourth, the high biocompatibility of the SS/PDMS-CBNP sensor was demonstrated by rabbit skin irritation tests. Finally, the remarkable water-repellent and sensing properties of the SS/PDMS-CBNP sensor allowed its application to monitor a swimmer's real-time situation and send distress signals when needed.

Assessment of the utility of the novel Phenion® full thickness human skin model for detecting the skin irritation potential of antimicrobial cleaning products

The skin is a potential route of exposure to antimicrobial cleaning products (ACP). Skin irritation, reversible damage to the skin, is an endpoint for protecting consumers and operators accidently exposed to these complex mixtures. To assess skin irritation of 24 ACP formulations, a new protocol was developed and adapted from OECD Test Guideline No. 439 with EpiDerm™ (epidermis model) replaced by Phenion® FT (full thickness tissue, including epidermis and dermis) as the test system. A full thickness tissue was utilized to provide a more human in vivo-like model. Formulations were applied to Phenion® FT and cell viability measured by MTT reduction after a 15-min exposure and 42 h post exposure period. A prediction model was applied, and results compared with in vivo rabbit skin irritation data. Concordance between in vivo and in vitro was demonstrated to be suitable (i.e., sensitivity 78%, specificity 83%, and accuracy 79%) using this modified OECD Test Guideline No. 439 method with a 70% cell viability selected as the most reasonable cut off for discriminating non-irritants (EPA Class IV). These results were considered suitable to develop a draft IATA i.e., with any ACP formulation identified as EPA Category IV in this test. The method will be further refined to distinguish irritant categories.

Improved Tool for Predicting Skin Irritation on Reconstructed Human Epidermis Models Based on Electrochemical Impedance Spectroscopy

The rabbit skin irritation test has been the standard for evaluating the irritation potential of chemicals; however, alternative methods that do not use animal testing are actively encouraged. Reconstructed human epidermis (RhE) models mimic the biochemical and physiological properties of the human epidermis and can be used as an alternative method. On RhE methods, the metabolic activity of RhE models is used to predict skin irritation, with a reduction in metabolic activity indicating a reduced number of viable cells and linking cell death to skin irritation processes. However, new challenges have emerged as the use of RhE models increases, including the need for non-invasive and marker-free methodologies to assess cellular states. Electrochemical impedance spectroscopy (EIS) is one such methodology that can meet these requirements. In this study, our results showed that EIS can differentiate between irritant and non-irritant chemicals, with a significant increase in the capacitance values observed in the irritant samples. A ROC curve analysis showed that the prediction method based on EIS met OECD TG 439 requirements at all time points and had 95% within-laboratory reproducibility. Comparison with the MTT viability assay showed that prediction using EIS achieved higher sensitivity, specificity, and accuracy. These results suggest that EIS could potentially replace animal testing in the evaluation of irritation potential and could be a valuable addition to in vitro testing strategies.

In vitro and in vivo evaluation of a novel lidocaine-loaded cubosomal gel for prolonged local anesthesia.

Marketed lidocaine dosage forms (such as ointment, gels, and injections) used to manage acute and chronic pain showed a short duration of action (<2 h). In this study, a lidocaine-loaded cubosomal gel was prepared to sustain the release of lidocaine to prolong the local anesthetic effect (high drug retention in the skin). Lidocaine-loaded cubosomal gels were prepared by melt emulsification and sonication using Pluronic F127 and DL-α-monoolein (at different levels). The cubosomal gels were characterized by morphology, size, zeta potential, entrapment efficacy, assay, viscosity, pH, and texture profiles. Ex vivo lidocaine permeation and retention studies were performed using Sprague-Dawley rat skin. Transmission electron microscopy images confirmed the bi-continuous liquid crystalline phase with a honeycomb cubosome structure. The cubosomal particle size (103-227nm), viscosity (13,524-15,627cp), and entrapment efficacy (78.4-94.7%) increase with the level of monoolein. The ex-vivo permeation study showed a biphasic release pattern, with lidocaine cleared from ointment within 4h (97.9% cumulative release), while cubosomal gels showed sustained release up to 24h (53.33-98.86% cumulative release). A skin retention study demonstrated that cubosomes can increase (up to 28-fold) the lidocaine content in the skin (4.56mg) compared to ointment (0.19mg). A rabbit skin irritation study showed no sign of irritation after the application of cubosomal gel. In the radiant heat tail-flick study, the local anesthetic effect of lidocaine from the cubosomal gel was sustained for up to 16h with 1.43-fold higher efficacy than marketed ointment. In conclusion, the study demonstrated the potential of cubosomal nanoparticle-laden gel to sustain the release of lidocaine for prolonging local anesthetic effects for pain management.

Preparation and In Vitro and In Vivo Evaluation of a Testosterone Film Forming Gel for the Treatment of Hypoactive Sexual Desire Disorder in Women.

Hypoactive sexual desire disorder (HSDD) is one of the most common sexual complaints in women. Currently, there is an unmet need for a drug treatment for this disorder. The purpose of this study was to develop a testosterone (TS) film forming gel used for women to treat HSDD by measuring the tackiness, peel adhesion force, tensile strength, and elasticity of the formulation. Diethylene glycol monoethyl ether (Transcutol P), an efficient penetration enhancer, was added to the optimized formulation and the transdermal permeation characteristics in vitro were studied using Franz-diffusion cells. The quantitative determination of TS was performed by high-performance liquid chromatography (HPLC). After 24 h, Transcutol P at 3% had the largest cumulative amount of drug and enhancement ratio of TS of 75.14 μg/cm2 and 2.82, respectively. After the screening of film forming polymers and penetration enhancers, the optimal formulation was as follows: glycerol (1%, w/w); 12.5% sodium carboxymethylcellulose (CMC-Na) aqueous solution (0.5%, w/w); 2.5% Carbomer ethanol solution (0.5%, w/w); Transcutol P ethanol solution (3%, w/w) containing 0.5% TS; and 8% Poly vinyl alcohol (PVA) aqueous solution (30%, w/w). The optimized film forming gel had good uniformity and the release of TS in vitro was close to 100% within 24 h. In vivo studies showed the formulations had optimal area under blood drug concentration curve values in the order of 3% Transcutol P > 1% Transcutol P > 5% Transcutol P > control preparation. The formulation with 3% Transcutol P provided the highest permeation effect both in vitro and in vivo. The safety of this formulation was further evaluated with a skin irritation test. It could effectively improve the rabbit skin irritation observed with a marketed transdermal patch Androderm®. The present study provides a promising approach for the development of a novel TS film forming gel for the treatment of HSDD in women.

Sustained transdermal delivery of human growth hormone from niosomal gel: in vitro and in vivo studies

Human growth hormone (hGH) is widely used to treat several diseases for decades. However, the current treatment regime requires frequent injections via subcutaneous route due to short in vivo half-life, which leads to pain and poor patient compliance. In this study, a novel transdermal (non-invasive) hGH loaded niosomes gel was prepared to reduce the frequency of subcutaneous injections and to improve the patient compliance. Niosomes were prepared by film hydration technique at three levels of cholesterol. The particle size and entrapment efficiency increases with an increase in the level of cholesterol. Transmission electron microscopy images confirmed the spherical shape of niosomes without aggregation. Texture profiles analysis indicates that the niosomal gel has the required mechanical properties for transdermal application. The ex vivo permeation profile showed sustain hGH release for 4 days from the niosomal gel compared to 24 h from the control gel without niosomes. A rabbit skin irritation study showed no sign of irritation after application of niosomal gel. The pharmacokinetic parameters in the rat model showed 7.22-fold higher bioavailability with niosomal gel compared to control gel. In conclusion, the study demonstrated the potential of niosomal gel as an effective long-term sustained release strategy for hGH delivery to replace traditional subcutaneous injections.

Safety assessment of Asterarcys quadricellulare, a microalga, with applications in poultry and livestock feed

Asterarcys quadricellulare (AQ) is a microalgal species with potential applications in improving the quality of animal feed, and safety studies on this species are lacking. Therefore, this study presents safety data on an industrially cultivated strain of AQ tested using the following Organisation for Economic Co-operation and Development (OECD) guidelines: acute skin irritation in rabbits; skin sensitisation in guinea pigs; acute eye irritation in rabbits; acute oral fixed-dose procedure in rats; and bacterial reverse mutation using the B.N. Ames technique. Results showed that AQ is non-irritant and non-sensitising to skin. AQ caused transient conjunctival lacrimation and redness; however, the scores for these clinical signs translated into low ocular irritation indices and classification of AQ as non-irritant to the eyes. An acute oral dose of AQ (2000 mg/kg) did not cause mortality, change in body weight gain, or any general, functional, and neurobehavioral clinical signs. In five strains of Salmonella typhimurium bacteria, treatment with AQ did not cause biologically or statistically significant changes in the number of revertant colonies, indicating that AQ does not cause mutagenic toxicity. This study demonstrates the safety of a heterotrophically-produced strain of AQ and supports its use as a safe and non-toxic feed ingredient.

Asthma-inducing potential of 28 substances in spray cleaning products-Assessed by quantitative structure activity relationship (QSAR) testing and literature review.

Exposure to spray cleaning products constitutes a potential risk for asthma induction. We set out to review whether substances in such products are potential inducers of asthma. We identified 101 spray cleaning products for professional use. Twenty‐eight of their chemical substances were selected. We based the selection on (a) positive prediction for respiratory sensitisation in humans based on quantitative structure activity relationship (QSAR) in the Danish (Q)SAR Database, (b) positive QSAR prediction for severe skin irritation in rabbits and (c) knowledge on the substances' physico‐chemical characteristics and toxicity. Combining the findings in the literature and QSAR predictions, we could group substances into four classes: (1) some indication in humans for asthma induction: chloramine, benzalkonium chloride; (2) some indication in animals for asthma induction: ethylenediaminetetraacetic acid (EDTA), citric acid; (3) equivocal data: hypochlorite; (4) few or lacking data: nitriloacetic acid, monoethanolamine, 2‐(2‐aminoethoxy)ethanol, 2‐diethylaminoethanol, alkyldimethylamin oxide, 1‐aminopropan‐2‐ol, methylisothiazolinone, benzisothiazolinone and chlormethylisothiazolinone; three specific sulphonates and sulfamic acid, salicylic acid and its analogue sodium benzoate, propane‐1,2‐diol, glycerol, propylidynetrimethanol, lactic acid, disodium malate, morpholine, bronopol and benzyl alcohol. In conclusion, we identified an asthma induction potential for some of the substances. In addition, we identified major knowledge gaps for most substances. Thus, more data are needed to feed into a strategy of safe‐by‐design, where substances with potential for induction of asthma are avoided in future (spray) cleaning products. Moreover, we suggest that QSAR predictions can serve to prioritise substances that need further testing in various areas of toxicology.

Safety of 0.5% hydrogen peroxide mist used in the disinfection gateway for COVID-19.

Hydrogen peroxide (H2O2) is a reactive chemical used in a wide range of applications. Most importantly, it is used for sterilization process in health care environment. In the present study, safety assessment of 0.5% of H2O2 and its mist intended to be used in the disinfection gateway for COVID-19 was evaluated. Skin irritation and repeated-dose inhalation toxicity studies were carried out in rabbits and rats, respectively. In Skin irritation study, New Zealand white rabbits were exposed topically with 0.5% H2O2 solution and observed for 24 h, 48 h, and 72 h. For repeated-dose inhalation toxicity study, Wistar rats (both male and female) were exposed (whole body exposure) to 0.5% of H2O2 mist, at a concentration of 11.022 (low dose—2-min exposure), 22.044 (medium dose—4-min exposure), and 55.11mg/kg (high dose/high dose recovery—10-min exposure) body weight, daily for 7 days. Rats in the high-dose recovery group (55.11mg/kg—10-min exposure) were kept for another 7 days without any exposure. A toxicological evaluation was done based on general health parameters, hematology, serum biochemistry, gross necropsy, and histopathological data. The results of the study indicated that there was no skin irritation potential induced on exposure of 0.5% of H2O2 to rabbits. Similarly, the inhalation toxicity of 0.5% of H2O2 mist imparts no evidence of hematological, biochemical, gross pathology, or histopathological abnormalities in rats. Further, at the laboratory condition stimulated, the NOEL was found to be 55.11mg/kg body weight. Hence, the present study concluded that 0.5% H2O2 or its mist used in the disinfection gateway for COVID-19 failed to induce any skin irritation in rabbits or inhalation toxicity in rats. Graphical abstract

Application of in vitro methods to evaluate the safety of baby care products

Draize rabbit eye irritation and skin irritation tests are widely used in the chemical industry as traditional methods to evaluate the safety of cosmetics. However, great differences among laboratories have caused great doubt in the industry. In addition, with vigorous development of the global animal protection movement, developed countries have launched the “3R” campaign, and various kinds of in vitro alternative methods have emerged. Hen's egg test on the chorioallantoic membrane (HET-CAM), which is similar to the structure of the human cornea and has a clear and complete vascular system, is based on the characteristics of the chorioallantoic membrane (CAM) in mid-term SPF egg embryos. The reconstructed human epidermis (EpiSkin®) is composed of normal human keratinocytes that are histologically similar to human epidermises seen in vivo, and it is cultured on a collagen matrix. Similar to EpiSkin®, Human Corneal Epithelium (SkinEthic™) is another reconstructed 3D human-corneal structure that is an alternative to the traditional eye irritation test. Three in vitro methods were conducted to evaluate the safety of 12 baby care products, which included the most common types. In addition, a consumer research study was also carried out for two weeks to evaluate the safety. The results of the reconstructed human epidermis model, human corneal epithelium model and consumer research showed that no irritation was found in any test products; however, HET-CAM tests showed positive results.

Analysis of variability in the rabbit skin irritation assay

The in vivo rabbit test is the benchmark against which new approach methodologies for skin irritation are usually compared. No alternative method offers a complete replacement of animal use for this endpoint for all regulatory applications. Variability in the animal reference data may be a limiting factor in identifying a replacement. We established a curated data set of 2624 test records, representing 990 substances, each tested at least twice, to characterize the reproducibility of the in vivo assay. Methodological deviations from guidelines were noted, and multiple data sets with differing tolerances for deviations were created. Conditional probabilities were used to evaluate the reproducibility of the in vivo method in identification of U.S. Environmental Protection Agency or Globally Harmonized System hazard categories. Chemicals classified as moderate irritants at least once were classified as mild or non-irritants at least 40% of the time when tested repeatedly. Variability was greatest between mild and moderate irritants, which both had less than a 50% likelihood of being replicated. Increased reproducibility was observed when a binary categorization between corrosives/moderate irritants and mild/non-irritants was used. This analysis indicates that variability present in the rabbit skin irritation test should be considered when evaluating nonanimal alternative methods as potential replacements.

The suitability of reconstructed human epidermis models for medical device irritation assessment: A comparison of In Vitro and In Vivo testing results

The ISO 10993 standards on biocompatibility assessment of medical devices discourage the use of animal tests when reliable and validated in vitro methods are available. A round robin validation study of in vitro reconstructed human epidermis (RhE) assays was performed as potential replacements for rabbit skin irritation testing. The RhE assays were able to accurately identify strong irritants in dilute medical device extracts. However, there was some uncertainty about whether RhE tissues accurately predicted the results of the rabbit skin patch or intracutaneous irritation test. To address that question, this paper presents in vivo data from the round robin and subsequent follow-up studies. The follow-up studies included simultaneous in vitro RhE model and in vivo testing of round robin polymer samples and the results of dual in vitro/in vivo testing of currently marketed medical device components/materials. Our results show for the first time that for both pure chemicals and medical device extracts the intracutaneous rabbit test is more sensitive to detect irritant activity than the rabbit skin patch test. The studies showed that the RhE models produced results that were essentially equivalent to those from the intracutaneous rabbit skin irritation test. Therefore, it is concluded that RhE in vitro models are acceptable replacements for the in vivo rabbit intracutaneous irritation test for evaluating the irritant potential of medical devices.

Evaluation of the medical devices benchmark materials in the controlled human patch testing and in the RhE in vitro skin irritation protocol

Several irritants were used in the in vitro irritation medical device round robin. The objective of this study was to verify their irritation potential using the human patch test (HPT), an in vitro assay, and in vivo data. The irritants were lactic acid (LA), heptanoic acid (HA), sodium dodecyl sulfate (SDS), Genapol® X-80 (GP), and Y-4 polymer. Dilute saline and sesame seed oil (SSO) solutions of each were evaluated using a 4 and 18 h HPT and the EpiDerm™ SIT-MD RhE assay; results were then compared to existing rabbit skin irritation test data. Results from the 4 h HPT were negative in most cases except for GP and SDS, while the 18 h HPT also identified some LA, HA, and GP samples as irritants. EpiDerm™ SIT-MD correctly identified all irritants except GP in SSO due to limited solubility. Data from cutaneous rabbit irritation tests were negative, while all intracutaneous results were strongly or weakly positive except for the most dilute GP solutions. These findings indicate that EpiDerm™ SIT-MD results correlate with those from the rabbit intracutaneous test and confirm that RhE assays are suitable replacements for animals in evaluating the tissue irritation potential of medical devices.

Pre-validation of an in vitro skin irritation test for medical devices using the reconstructed human tissue model EpiDerm™

Assessment of dermal irritation is an essential component of the safety evaluation of medical devices. Reconstructed human epidermis (RhE) models have replaced rabbit skin irritation testing for neat chemicals and their mixtures (OECD Test Guideline 439). However, this guideline cannot be directly applied to the area of medical devices (MD) since their non-toxicity assessment is largely based on the testing of MD extracts that may have very low irritation potential. Therefore, the RhE-methods previously validated with neat chemicals needed to be modified to reflect the needs for detection of low levels of potential irritants.A protocol employing RhE EpiDerm was optimized in 2013 using known irritants and spiked polymers (Casas et al., 2013, TIV). In 2014 and 2015 MatTek In Vitro Life Science Laboratories (IVLSL) and RIVM assessed the transferability of the assay. After the successful transfer and standardization of the protocol, 17 laboratories were trained in the use of the protocol in the preparation for the validation. Laboratories produced data with 98% agreement of predictions for the selected references and controls.We conclude that a modified RhE skin irritation test has the potential to address the skin irritation potential of the medical devices. Standardization and focus on the technical issues is essential for accurate prediction.

Round robin study to evaluate the reconstructed human epidermis (RhE) model as an in vitro skin irritation test for detection of irritant activity in medical device extracts

Assessment of skin irritation is an essential component of the safety evaluation of medical devices. OECD Test Guideline 439 describes the use of reconstructed human epidermis (RhE) as an in vitro test system for classification of skin irritation by neat chemicals. An international round robin study was conducted to evaluate the RhE method for determination of skin irritant potential of medical device extracts. Four irritant polymers and three non-irritant controls were obtained or developed that had demonstrated their suitability to act as positive or negative test samples. The RhE tissues (EpiDerm™ and SkinEthic™ RHE) were dosed with 100 μL aliquots of either saline or sesame oil extract. Incubation times were 18 h (EpiDerm™) and 24 h (SkinEthic™ RHE). Cell viability reduction > 50% was indicative of skin irritation. Both the EpiDerm™ and SkinEthic™ RHE tissues were able to correctly identify virtually all of the irritant polymer samples either in the saline, sesame oil or both solvent extracts. Our results indicate that RhE tissue models can detect the presence of strong skin irritants at low levels in dilute medical device polymer extracts. Therefore, these models may be suitable replacements for the rabbit skin irritation test to support the biological evaluation of medical devices.

In Vitro and In Vivo Evaluation of DMSO and Azone as Penetration Enhancers for Cutaneous Application of Celecoxib.

Celecoxib (CXB) has been explored as an anti-inflammatory or chemopreventive drug for topical treatment of skin diseases and cancer. The main aim of this work was to investigate the potential of dimethylsufoxide (DMSO) and Azone (AZ) as penetration enhancers (P.Es) for topical delivery of CXB. The in vitro studies, drug release, skin permeability and potential cytotoxicity/genotoxicity were carried out with formulations containing or not DMSO or AZ (5% and 10%). Skin irritation in rabbits and topical anti-inflammatory activity in mice were assayed in vivo. Skin permeation was minimal while higher retention in stratum corneum (SC) and epidermis plus dermis was found (28.0 and 3-fold respectively) from 10.0% AZ compared to the control indicating a localized CXB effect. CXB associated to 5% or 10% DMSO has shown high drug permeation through skin with low retention. Associations of CXB with both enhancers were not cytotoxic or genotoxic, suggesting safety for cutaneous application. In vivo skin irritation assays of all formulations indicated mild irritation effects and, thus, possible use for longer periods. In vivo anti-inflammatory tests showed that ear edema could be inhibited by CXB associated with 5.0% DMSO (53.0%) or 10.0% AZ (40.0%). These inhibition values were almost 2-fold higher when compared to a commercial formula. Although DMSO- associated CXB is an efficient edema inhibitor its high skin permeation suggests risks of systemic effects, whereas association to 10% AZ may improve topical delivery of the drug with good anti-inflammatory activity and no cytotoxic/genotoxic or significant skin irritation effects.

Development of a nanogel formulation for transdermal delivery of tenoxicam: a pharmacokinetic–pharmacodynamic modeling approach for quantitative prediction of skin absorption

This study investigates potentials of solid lipid nanoparticles (SLN)-based gel for transdermal delivery of tenoxicam (TNX) and describes a pharmacokinetic–pharmacodynamic (PK–PD) modeling approach for predicting concentration–time profile in skin. A 23 factorial design was adopted to study the effect of formulation factors on SLN properties and determine the optimal formulation. SLN-gel tolerability was investigated using rabbit skin irritation test. Its anti-inflammatory activity was assessed by carrageenan-induced rat paw edema test. A published Hill model for in vitro inhibition of COX-2 enzyme was fitted to edema inhibition data. Concentration in skin was represented as a linear spline function and coefficients were estimated using non-linear regression. Uncertainty in predicted concentrations was assessed using Monte Carlo simulations. The optimized SLN was spherical vesicles (58.1 ± 3.1 nm) with adequate entrapment efficiency (69.6 ± 2.6%). The SLN-gel formulation was well-tolerated. It increased TNX activity and skin level by 40 ± 13.5, and 227 ± 116%, respectively. Average Cmax and AUC0–24 predicted by the model were 2- and 3.6-folds higher than the corresponding values computed using in vitro permeability data. SLN-gel is a safe and efficient carrier for TNX across skin in the treatment of inflammatory disorders. PK–PD modeling is a promising approach for indirect quantitation of skin deposition from PD activity data.

In vitro assessment of skin irritation potential of surfactant-based formulations by using a 3-D skin reconstructed tissue model and cytokine response.

The personal care industry is focused on developing safe, more efficacious, and increasingly milder products, that are routinely undergoing preclinical and clinical testing before becoming available for consumer use on skin. In vitro systems based on skin reconstructed equivalents are now established for the preclinical assessment of product irritation potential and as alternative testing methods to the classic Draize rabbit skin irritation test. We have used the 3-D EpiDerm™ model system to evaluate tissue viability and primary cytokine interleukin-1α release as a way to evaluate the potential dermal irritation of 224 non-ionic, amphoteric and/or anionic surfactant-containing formulations, or individual raw materials. As part of our testing programme, two representative benchmark materials with known clinical skin irritation potential were qualified through repeated testing, for use as references for the skin irritation evaluation of formulations containing new surfactant ingredients. We have established a correlation between the in vitro screening approach and clinical testing, and are continually expanding our database to enhance this correlation. This testing programme integrates the efforts of global manufacturers of personal care products that focus on the development of increasingly milder formulations to be applied to the skin, without the use of animal testing.