Quasi-static Piezoelectric D33 Coefficient Research Articles

Piezoelectricity of single-and multi-layer cellular polypropylene film electrets

The piezoelectricity of a pressure-treated cellular polypropylene (PP) (commercially available, trade name PQ50) film electret was studied by the measurement of direct-and inverse-piezoelectric d 33 coefficient. The sample expanded with optimal parameters has a quasi-static piezoelectric d 33 coefficient of more than 600 pC/N, which is about 40 times as high as that of polyvinylidene fluoride (PVDF). In addition, the hybrid multi-layer system, which properly combines single-layer cellular PP film electrets, shows a quasi-static piezoelectric sensitivity of as high as 2010 pC/N. This is around three times higher than that of well-known lead zirconate titanate (PZT) ceramics. The results are theoretically and technically helpful to promote the application of cellular PP film electrets.

Thermally stable fluorocarbon ferroelectrets with high piezoelectric coefficient

Fused layers of polytetrafluoroethylene (PTFE) and fluoroethylenepropylene (FEP) films with small interfacial cellular gas voids show large quasistatic piezoelectric d33-coefficients of more than 1000 pC/N. After annealing at a temperature of 90 °C for 4 days, d33 amounts to about 400 pC/N and thereafter changes by less than 10 percent over a period of 5 days at this temperature. The piezoelectric coefficient is independent of applied pressure in the range up to 20 kPa. Its frequency response shows a small decrease up to the vicinity of the thickness resonance frequency at 40 to 150 kHz.

Piezo- and pyroelectricity of a polymer-foam space-charge electret

Charged closed-cell polypropylene polymer foams are highly sensitive and broadband piezoelectric materials with a quasistatic piezoelectric d33 coefficient about 250 pC/N and a dynamic d33 coefficient of 140 pC/N at 600 kHz. The piezoelectric coefficient is much larger than that of ferroelectric polymers, like polyvinylidene fluoride, and compares favorably with ferroelectric ceramics, such as lead zirconate titanate. The pyroelectric coefficient p3=0.25 μC/m2 K is small in comparison to ferroelectric polymers and ferroelectric ceramics. The low density, small pyroelectric coefficient and high piezoelectric sensitivity make charged polymer foams attractive for a wide range of sensor and transducer applications in acoustics, air-borne ultrasound, medical diagnostics, and nondestructive testing.