Amount Of Volatile Organic Compounds Research Articles

Research on the types and toxicity of VOCs released from solvent-based inks in high temperature environment

ABSTRACT During the utilization, blending, transportation, and storage, a significant amount of volatile organic compounds (VOCs) are released from inks, posing risks to both human health and the ecological environment. This study sought to identify the types and structures of VOCs released from four types of solvent-based inks (referred to as CAB, PVB, AKR, and Rs inks) in high-temperature settings and to assess the bioaccumulation factors, developmental toxicity, and acute toxicity of these released VOCs. The findings revealed that all tested inks released substantial amounts of VOCs in high-temperature environments. CAB and PVB inks released fewer types of VOCs with relatively smaller molecular weights, primarily with carboxylic acid groups and hydroxyl groups, while AKR and Rs inks released more types of VOCs with larger molecular weights, including polycyclic aromatic hydrocarbons. Toxicity analysis indicated that although the primary VOCs released from CAB and PVB ink displayed some developmental toxicity, their bioaccumulation factors were below 100. The principal VOCs from AKR ink did not exhibit developmental toxicity. Conversely, the predominant VOCs from Rs ink not only demonstrated developmental toxicity but also had bioaccumulation factors exceeding 100. Additionally, the VOCs released from CAB, PVB, and AKR inks exhibited stronger acute toxicity to luminescent bacteria, while those from Rs ink showed greater acute toxicity to fish. These results offer a scientific foundation for the safe usage of inks and environmental conservation.

Pinewood VOC emissions protect from oxazolone-induced inflammation and dysbiosis in a mouse model of atopic dermatitis

Pinewood, increasingly used in construction and interior fittings, emits high amounts of volatile organic compounds (VOCs), which tend to accumulate in indoor air. Whether indoor VOCs affect the development of atopic dermatitis (AD) is a matter of debate. We aimed to evaluate the effects of pinewood VOCs on the development of AD-like inflammatory phenotype and linked microbiome alterations, both hallmarks of AD. An oxazolone-induced mouse model of AD was exposed to three different VOC concentrations emitted by pinewood plates throughout the experiment. The disease course and associated immunological and microbiological changes were evaluated. To validate and translate our results to humans, human keratinocytes were exposed to a synthetic pinewood VOCs mixture in an AD environment. Pinewood emitted mainly terpenes, which at a total concentration of 5 mg/m3 significantly improved oxazolone-induced key AD parameters, such as serum total IgE, transepidermal water loss, barrier gene alteration, inflammation, and dysbiosis. Notably, exposure to pinewood VOCs restored the loss of microbial richness and inhibit Staphylococci expansion characteristic of the oxazolone-induced mouse AD model. Most beneficial effects of pinewood VOCs were dose-dependent. In fact, lower (<3 mg/m3) or higher (>10 mg/m3) pinewood VOC levels maintained only limited beneficial effects, such as preserving the microbiome richness or impeding Staphylococci expansion, respectively. In the human in-vitro model, exposure of keratinocytes grown in an AD environment to a pinewood VOCs mixture reduced the release of inflammatory markers. In conclusion, our results indicate that airborne phytochemicals emitted from pinewood have beneficial effects on an AD-like phenotype and associated dysbiosis. These investigations highlight the effects of terpenes as environmental compounds in the prevention and/or control of atopic skin disease.

Volatile organic compounds in typical coal chemical industrial park in China and their environmental and health impacts

The coal chemical industry produces a large amount of volatile organic compounds (VOCs), and the emission characteristics and associated impact on the environment and health of the residents are still unclear. This study determined the VOC concentrations and compositions in the Jinjie Coal Chemical Industry Park which is located in northern China. The average concentrations of total measured VOCs (TVOCs) in the industrial areas in summer and winter were 231.5 and 103.2 μg/m3, which were higher than those in the residential areas (123.7 and 70.3 μg/m3), respectively. Aromatics, Oxygenated volatile organic compounds (OVOCs), and alkanes were the dominant VOC classes in the industrial areas, while halocarbons, OVOCs, and alkenes had higher compositions in the residential areas where were not only affected by industrial emissions and also other anthropogenic sources. OVOCs contributed over 43% of ozone formation potential (OFP), while aromatics contributed over 61% of secondary organic aerosol (SOA) formation in the Park in both seasons. Using the source apportionment method, biogenic emission and anthropogenic source (gasoline production, coking emission, fuel combustion, solvent coating, and vehicle exhaust) were major contributors to VOCs in residential areas. The industrial-related emissions were the main components of anthropogenic source, accounting for 53.5%–58.7% of the overall VOCs. With reliable estimations of the health aspects, exposures to acrolein (HQ: 7.4–126.6) and formaldehyde (ILCR: 5.5 × 10−3-5.7 × 10−2) posed the highest non-carcinogenic and carcinogenic risks, accounting for 94.3%–98.6% and 55.8%–93.8% of the total HQ and ILCR, respectively. The results demonstrated that substantial environmental and health co-benefits to the residents could be achieved by reducing the industrial emissions from gasoline production, coking process, and diesel-fueled vehicles in the Jinjie Coal Chemical Industry Park. Prioritizing the establishment of efficient air pollution measures and tightening industrial emission standards, especially for hazardous VOCs, are recommended according to the findings of the valuable work.

Facile and fast construction of biomimetic, waterborne, and superhydrophobic coatings via spraying strategy

Typically, the preparation of superhydrophobic coatings may release a large amount of volatile organic compounds (VOCs), which will be potentially harmful to the environment. In this condition, waterborne coatings have gradually become the main method to replace the traditional organic solvent-based coatings in recent years. Inspired by natural superhydrophobic phenomena, biomimetic, waterborne, and superhydrophobic coatings with multi-functional integration have been prepared via a one-step pneumatic spraying technique in this paper. The coatings were mainly composed of solvent (water), low surface energy substances (polytetrafluoroethylene emulsion (PTFE)), binding agents (waterborne silicone resin (WSR)), rough structure maker (polyphenylene sulfide (PPS) and graphene powder (GP)), and filler dispersion agent (dodecyl phenyl polyoxyethylene (OP-10)). Owing to the formation of hierarchical micro/nano-scaled structure covered with low surface energy, the water contact angle (WCA) and water sliding angle (WSA) values of as-prepared coatings can reach 155.5° ± 1.1° and 9.2° ± 0.3°, respectively. This is feasible for endowing the coatings with rich surface functionalities such as self-cleaning properties, anti-icing ability, anti-corrosion properties, and oil-water separation. Furthermore, the adequate durability and stability of as-prepared coatings have been confirmed by a series of mechanical and chemical damage tests. The super-hydrophobicity can be retained even after 12 m sandpaper abrasion, 24 h continuous UV irradiation and acid/alkali immersion tests. Thus, this article has provided an effective and simplified strategy for preparing multifunction-integrated and waterborne superhydrophobic coatings, which will extend its potential application in many daily life and industrial fields.

The impact of surfaces on indoor air chemistry following cooking and cleaning.

Cooking and cleaning are common sources of indoor air pollutants, including volatile organic compounds (VOCs). The chemical fate of VOCs indoors is determined by both gas-phase and multi-phase chemistry, and can result in the formation of potentially hazardous secondary pollutants. Chemical interactions at the gas-surface boundary play an important role in indoor environments due to the characteristically high surface area to volume ratios (SAVs). This study first characterises the VOC emissions from a typical cooking and cleaning activity in a semi-realistic domestic kitchen, using real-time measurements. While cooking emitted a larger amount of VOCs overall, both cooking and cleaning were sources of chemically reactive monoterpenes (peak mixing ratios 7 ppb and 2 ppb, respectively). Chemical processing of the VOC emissions from sequential cooking and cleaning activities was then simulated in a kitchen using a detailed chemical model. Results showed that ozone (O3) deposition was most effective onto plastic and soft furnishings, while wooden surfaces were the most effective at producing formaldehyde following multi-phase chemistry. Subsequent modelling of cooking and cleaning emissions using a range of measured kitchen SAVs revealed that indoor oxidant levels and the subsequent chemistry, are strongly influenced by the total and material-specific SAV of the room. O3 mixing ratios ranged from 1.3-7.8 ppb across 9 simulated kitchens, with higher concentrations of secondary pollutants observed at higher O3 concentration. Increased room volume, decreased total SAV, decreased SAVs of plastic and soft furnishings, and increased wood SAV contributed to elevated formaldehyde and total peroxyacetyl nitrates (PANs) mixing ratios, of up to 1548 ppt and 643 ppt, respectively, following cooking and cleaning. Therefore, the size and material composition of indoor environments has the potential to impact the chemical processing of VOC emissions from common occupant activities.

Utilizing traditional knowledge and creatively repurposing mining waste to develop new sustainable products geared toward eco-friendly construction

Mining is a very important activity for civil engineering. Important aggregates are removed from this for civil construction, bridges and roads, development of construction materials and several other applications. However, this activity has negatively impacted both the exploration areas and their surroundings. Associated with this environmental concern, it is possible to enter the context of real estate paints, which emit considerable amounts of volatile organic compounds that harm the atmosphere and the health of workers and users, in addition to reducing the air quality of the environment in which they are located was applied. Furthermore, with technological advances, industrial paints with synthetic pigments began to replace natural products, causing environmental pollution. The volatile organic compounds generated by real estate paints have resulted in health problems for the population. The literature has reported a growing search for renewable paint products, such as environmentally friendly paints and other environmentally friendly products for use in construction. In this way, materials from mining waste have been studied as an alternative for the development of ecological bricks. Studies suggest that mining waste, considered an environmental liability, can be an alternative for the production of soil-cement bricks that meet technical and environmental specifications. In addition to ecological bricks, another aspect that has emerged as a viable alternative for using mining waste is the production of ecological paints and the application of possible natural pigments to diversify the colors of ecological paints. Finally, the manufacture of ecological paints, natural dyes, ecological bricks and cement from mining waste, in addition to being an environmental improvement alternative, can be used in socio-environmental projects, allowing social inclusion, teaching and reproducing environmental education, and increasing environmental awareness. In this review we address the main types of mining waste that are used in the production of bricks and paints ecological.

Degradation performance and mechanism of VOCs in asphalt by alkali metal-doped La2Ce2O7-based fluorite through pyroelectric and photocatalytic synergy

Under high-temperature construction conditions, the use of asphalt can release a large amount of volatile organic compounds (VOCs), which has adverse effect on the environment and human health. Part of fluorite oxides show potential application in VOCs conversion due to their excellent photoresponse and chemical stability in addition to ferroelectricity, piezoelectricity and pyroelectricity properties. In this paper, La2Ce2O7-based fluorite was modified with alkali metal doping and its photo-thermal coupling catalytic effects on the degradation performance of VOCs in asphalt were investigated. The results show that the fluorite catalysts La1.85A0.15Ce2O7 (A=Li, Na, K, Rb, Cs) have efficient electron-hole pair separation ability. Among them, the Rb+ doped La2Ce2O7 sample not only has stronger pyroelectric effect due to increased lattice distortion and oxygen vacancies, but also has the best photogenerated charge transport property and more favorable valence band position for oxidation reaction. Under the photo-thermal synergistic effect, the catalytic degradation performance of VOCs in asphalt by Rb+ doped La2Ce2O7 catalyst can reach 82.61 % at 50 min. Additionally, dynamic shear rheological tests indicate that the addition of catalysts at this blending ratio can enhance the rutting resistance of the asphalt material. This study introduces an innovative approach to enhance the efficiency of multi-field coupled degradation processes of volatile organic compounds (VOCs) in asphalt.

Mechanisms of single and mixed microbial fermentation to improve summer-autumn green tea

To investigate the effect of individual and collaborative fermentation on summer-autumn green tea (SAGT) quality. Liquid fermentation with individual inoculation of Aspergillus cristatus (ACFT), Aspergillus niger (ANFT) and mixed inoculation of A. cristatus/A. niger (MFT), respectively, with SAGT extracts (CT) as raw materials. The volatile organic compounds (VOCs), characteristic non-volatile compounds and sensory evaluation of tea samples were determined. The results showed a significant decrease in the content of tea polyphenols, carbohydrates and nongalloylated catechins (C, EC) and a significant increase in the amount of VOCs in MFT compared to ANFT and ACFT. The results of metabolic pathway analysis and sensory evaluation showed that ACFT went through the terpene and phenylpropanoic acid metabolic pathway, which produced large amounts of α-terpineol, phenethyl alcohol, and methyl salicylate, which in turn conferred ACFT with distinctly sweet, floral, and herbal aroma. ANFT produces large amounts of linalool oxides I and II, mainly through the linalool oxide metabolic pathway, making ANFT a distinctive aged and woody aroma. MFT may be due to the strong woody aroma of linalool oxides masking other weaker and better aromas, thus giving MFT a significant woody, herbal and stale aroma. This study provides new insights and a theoretical basis for mixed fungal fermentation to improve the quality of SAGT.

Volatile organic compounds and cancer risk assessment in an intensive care unit.

Changes caused by air-cleaning devices in the amounts of volatile organic compounds in an intensive care unit were monitored in the study. The cancer risk and hazard index were calculated. The measurements were made for one month at isolated room and two different points and times in the intensive care unit. According to the sampling program, the air-cleaning devices were turned off in weeks 1 and 4 and turned on in weeks 2 and 3. Volatile organic compounds were collected by active sampling. Samples were analyzed by a thermal desorber coupled to a gas chromatography-mass spectrometry instrument with selective ion monitoring. The results showed that the concentrations of benzene, toluene, and o-xylene decreased by about 70% after the air-cleaning devices were installed. The cancer risk assessment for naphthalene was recorded at the highest level of cancer risk (Class A). The hazard index value of naphthalene was recorded at the harmful level when air-cleaning devices were not installed. The concentrations of benzene (p = 0.01), toluene (p = 0.02), ethylbenzene (p = 0.02), styrene (p = 0.01), and m, p-xylene (p = 0.04) before the air-cleaning devices were installed were significantly different from those recorded when the air-cleaning devices were turned on.

Thermo‐oxidative degradation behavior of poly(vinyl chloride) insulation for new and overloaded wires via TG‐FTIR

AbstractWhen a poly(vinyl chloride) (PVC) wire experiences overload failure, the internal structure of the insulation changes to become overloaded insulation and the fire hazard changes. In this study, the thermo‐oxidative degradation behavior of new and overloaded PVC insulation materials was analyzed using coupled thermogravimetric‐Fourier transform infrared spectroscopy (TG‐FTIR). The thermo‐oxidative degradation results show that the first two stages of thermo‐oxidative degradation of PVC insulation are important stages for measuring fire hazard. In addition, the onset temperature of thermo‐oxidative degradation of overloaded PVC insulation was increased. The activation energies of the first two stages of the overloaded PVC insulation increased by 7.7% and 27.0%, respectively, compared to the new PVC insulation. And the reaction mechanism is changed. The FTIR results indicate that the increased amount of volatile organic compounds and CO2 generated during the pyrolysis of the overloaded PVC insulation may result in the generation of more heat and smoke during combustion, thus increasing the fire hazard.

An Innovative Approach to Assessing the Quality of Organoleptic Properties of Base Polymers in Orthopedic Dentistry

Modern technologies using an «electronic nose» imitating the human sense of smell open up new prospects for the objective assessment of the organoleptic properties of polymer materials. The purpose of the study was to compare the level of emissions of volatile organic compounds from modern base materials used in various technological processes for the manufacture of removable denture structures, as well as to assess the possible organoleptic properties of the finished dentures in comparison with known analogues using an «electronic nose» gas analyzer. For this purpose, samples were made from different polymer base materials in the amount of 26 pieces, which were studied using an “electronic nose” gas analyzer using the author’s method [Kuchmenko et al., 2023]. The study confirmed the effectiveness of the proposed improved technology in reducing the noise level of volatile organic compounds in samples made from the «Belakril-E GO» base material by 29 % compared to similar samples produced using standard technology. A reduction in the amount of volatile organic compounds that can cause unwanted odors confirms the higher purity and quality of the polymer and will contribute to a more comfortable adaptation of patients to removable dentures made from this polymer.

Early Detection of Ventilator-associated Pneumonia From Exhaled Breath in Intensive Care Unit Patients.

Evaluate associations between volatile organic compounds (VOCs) in heat and moisture exchange (HME) filters and the presence of ventilator-associated pneumonia (VAP). Clinical diagnostic criteria for VAP have poor interobserver reliability, and cultures are slow to result. Exhaled breath contains VOCs related to gram-negative bacterial proliferation, the most identified organisms in VAP. We hypothesized that exhaled VOCs on HME filters can predict nascent VAP in mechanically ventilated intensive care unit patients. Gas chromatography-mass spectrometry was used to analyze 111 HME filters from 12 intubated patients who developed VAP. Identities and relative amounts of VOCs were associated with dates of clinical suspicion and culture confirmation of VAP. Matched pairs t tests were performed to compare VOC abundances in HME filters collected within 3 days pre and postclinical suspicion of VAP (pneumonia days), versus outside of these days (non-pneumonia days). A receiver operating characteristic curve was generated to determine the diagnostic potential of VOCs. Carbon disulfide, associated with the proliferation of certain gram-negative bacteria, was found in samples collected during pneumonia days for 11 of 12 patients. Carbon disulfide levels were significantly greater ( P = 0.0163) for filters on pneumonia days. The Area Under the Curve of the Reciever Operating Characteristic curve (AUC ROC) for carbon disulfide was 0.649 (95% CI: 0.419-0.88). Carbon disulfide associated with gram-negative VAP can be identified on HME filters up to 3 days before the initial clinical suspicion, and approximately a week before culture confirmation. This suggests VOC sensors may have potential as an adjunctive method for early detection of VAP.

Effect of Volatile Organic Compounds on Pulmonary Functions Among Paint Industry Workers of Unorganized Sectors.

Background Paint industry workers are constantly exposed to paints and organic solvents that contain a substantial quantity of volatile organic compounds (VOCs). Exposure to VOC emissions could result in pulmonary, neurobehavioral, and hematological consequences. Limited studies have been undertaken in India to assess the health consequences of VOCs among paint industry workers in unorganized sectors. Aim To assess the effects of VOCs on pulmonary function in paint industry workers of unorganized sectors. Methodology A hundred and twenty full-time male construction painters and small-scale paint manufacturing workers aged 25-60 were assessed for respiratory symptoms using a questionnaire, and pulmonary functions using Wright's Peak Expiratory Flow Meter (PEFR). Participants were randomly selected forVOC assessment andthe cumulative solvent exposure index was calculated. A pulmonary function test (PFT) was performed on a subset of construction painters (n=30) using a Koko spirometer. Results The concentration of VOCs such as benzene, ethylbenzene, toluene, and xylene (BETX) and dichloromethane levels exceeded American Conference of Governmental Industrial Hygienists (ACGIH)threshold limit values (TLVs) among the paint manufacturing workers. About 52% of paint workers reported respiratory symptoms. Around 22% of the participants showedreduced pulmonary function (PEFR<400 L/min). There was a significant weaknegativecorrelationbetween PEFR andwork experience (r = -0.2, p=0.03). PFT parameters among a subset of construction painters revealed a significant moderate negative correlation with work experience [forced expiratory volume at the onset of the first second (FEV1) (r = -0.6, p=0.001) and forced vital capacity (FVC) (r = -0.53, p=0.005)] and cumulative VOC exposure index [FEV1 (r = -0.53, p = 0.004) and FVC (r = -0.5, p = 0.008)]. Conclusion The concentration of VOCs was higher among paint industry workers of unorganized sectors and they reported respiratory symptoms and diminished pulmonary function. To reduce morbidity, it is critical to enhance awareness about occupational safety and services in these unorganized sectors.

Sprayed Urine Emits a Pungent Odor due to its Increased Adhesion to Vertical Objects via Urinary Proteins Rather Than to Changes in its Volatile Chemical Profile in Domestic Cats.

Spraying urine on vertical objects by raising the tail is a commonly observed functional behavior for chemical communication in Felidae species, including domestic cats (Felis silvestris catus). The sprayed urine is recognized as a chemical signal for territorial ownership of their habitats. Previous studies reported that sprayed urine emits a more pungent odor than urine excreted from a squatting position. However, little is known about how sprayed urine acts as a strong scent mark in the environment. Here, we showed that sprayed urine originates only from bladder urine without any secretions, such as anal sac secretions, but it can effectively emit volatile organic compounds (VOCs) when smeared on vertical objects due to its strong adhesion. Chemical profiles of VOCs and odor qualities were similar between fresh sprayed urine and bladder urine sampled immediately after spraying from the same individuals. Meanwhile, feline-specific proteinuria arising from excretion of a carboxylesterase that produces a precursor of cat-specific odorants resulted in reduced surface tension of the urine and increased adhesion to vertical surfaces, which kept sprayed urine on the surfaces and led to the emission of large amounts of VOCs. In conclusion, proteinuria contributes to the emission of a strong odor through its enhanced adhesion to vertical objects without other secretions containing malodorous substances. These findings improve our understanding of the mechanism of scent marking via the spraying of urine for chemical communication in cats.

Numerical Simulation of Flow Characteristics for Supercritical CO2-Sprayed Polyurethane Resin.

Conventional paint spraying processes often use small molecule organic solvents and emit a large amount of volatile organic compounds (VOCs) that are highly toxic, flammable, and explosive. Alternatively, the spraying technology using supercritical CO2 (scCO2) as a solvent has attracted attention because of its ability to reduce VOC emissions, but the flow characteristics of coatings have not been thoroughly studied. Therefore, we numerically simulate the spraying process based on the actual process of scCO2 spraying polyurethane coatings by computational fluid dynamics (CFD). The effects of inlet pressure and volume fraction of scCO2 on the fluid motion parameters inside the nozzle as well as the atomization effect of droplets outside the nozzle are investigated. The simulated results show that a fluid with a large volume fraction of scCO2 will obtain a smaller density, resulting in a larger velocity and a larger distance for the spray to effectively spray. Higher coating content and bigger inlet pressures will result in higher discrete phase model (DPM) concentrations, and thus a bigger inlet pressure should be used to make the droplets more uniform across the 30° spray range. This study can provide theoretical guidance for the process of scCO2-sprayed polyurethane resin.

Absorption of n-butyl acetate from tannery air emissions by waste vegetable oil/water emulsions

Tanning industries emit a huge quantity of Volatile Organic Compounds (VOCs), including hydrophilic and hydrophobic solvents. In this study, vegetable oil/water emulsions with 2 and 5 vol% of corn oil (O) or waste cooking oil (WCO) were prepared. Their potential as absorbents of n-butyl acetate (BA), in place of water, was investigated to increase the efficiency of tannery wet scrubbers. BA was selected as a representative component of hydrophobic VOC emissions derived from leather finishing processes. Static and dynamic absorption tests were performed with a BA concentration of 500 ppmv (2.6 g/m3) and a flowrate of 3.0 L/min to evaluate Henry’s law constant, absorption efficiency, absorption capacity, and saturation time of the various investigated absorbents. The feasibility of the absorbent regeneration was also studied by hot stripping with nitrogen. The results showed that Henry’s constant of BA in oil/surfactant/water or oil/water emulsions (5 vol% oil), regardless of the oil used, were significantly lower than those in water (3.6 versus 15.9 atm), and BA absorption capacity (0.84 g/L) was four times higher than the value in water. The presence of the surfactant (0.2–0.8 vol%) contributed to improving the oil/water emulsions stability without having a significant effect on BA absorption capacity. Almost complete BA desorption from the saturated emulsions was obtained by flowing hot N2 at 80°C, demonstrating the absorbent regeneration's feasibility followed by recovery and reuse. Therefore, the oil/water emulsions containing 5 vol% of WCO are efficient and sustainable absorbents of BA, with potential use in VOC emission treatment systems.

Extraction of volatile organic compounds liberated upon filament extrusion by 3D pen and its comparison with a desktop 3D printer using solid-phase microextraction fiber and Arrow

Desktop 3D printers that operate by the fused deposition modeling (FDM) mechanism are known to release numerous hazardous volatile organic compounds (VOCs) during printing, including some with potential carcinogenic effects. Operating in a similar manner to FDM 3D printers, 3D pens have gained popularity recently from their ability to allow users to effortlessly draw in the air or create various 3D printed shapes while handling the device like a pen. In contrast to numerous modern 3D printers, 3D pens lack their own ventilation systems and are often used in settings with minimum airflow. Their operation makes users more vulnerable to VOC emissions, as the released VOCs are likely to be in the breathing zone. Consequently, monitoring VOCs released during the use of 3D pens is crucial. In this study, VOCs liberated while extruding acrylonitrile butadiene styrene (ABS) filaments from a 3D pen were measured by solid-phase microextraction (SPME) combined with gas chromatography/mass spectrometry (GC/MS). SPME was investigated using the traditional fiber and Arrow geometries with the DVB/Carbon WR/PDMS sorbent while four different brands of ABS filaments—Amazon Basics, Gizmodork, Mynt 3D, and Novamaker—were used with the 3D pen. Heatmap analysis showed differentiation among these brands based on the liberated VOCs. The nozzle temperature and printing speed were found to affect the number and amount of released VOCs. This study goes a step further and presents for the first time a comparison between 3D pen and a desktop 3D printer based on liberated VOCs. Interestingly, the findings reveal that the 3D pen releases a greater number and amount of VOCs compared to the printer. The amounts of liberated VOCs, as indicated by the corresponding chromatographic peak areas, were found to be 1.4 to 62.6 times higher for the 3D pen compared to the 3D printer when using SPME Arrow.

Balancing the "magic triangle" performance of tire rubber nanocomposites with novel low VOC silane coupling agents

Nowadays, coupling agents are still the core technology of the “green tire” industry, which not only effectively weaken the silica network but also enhance the interface interaction between silica and rubber matrix. However, the reaction between the traditional silane coupling agents and the silanol groups on silica surface generates a large amount of volatile organic compounds (VOCs), which can affect the performance of the rubber composites and pollute the environment. In this paper, a series of novel coupling agents with low VOC emission were synthesized by reacting fatty alcohol polyoxyethylene ethers of different polyether lengths (AEOX) with bis-[γ-(triethoxysilyl) propyl]-tetrasulfide TESPT (Si69). The structure of the novel coupling agent was characterized using FT-IR and 1H NMR. Meanwhile, it has been proven through FT-IR, XPS, TGA, and GCMS that the novel coupling agent can react with silica and reduce VOC emissions. Then the novel coupling agent was added into the silica/natural rubber (NR) nanocomposite. The test results of rubber composites showed that the addition of novel coupling agent can significantly enhance the dispersion of silica in the rubber matrix and effectively balance the "magic triangle" performance of tire. As a result, the rolling resistance of the silica/NR composites is reduced by 15.8 %, the wet skid resistance is improved by 14.2 %, and the abrasion resistance is improved by 20.3 %.

In situ construction of epoxy crosslinked Si-Al zeolite-like catalytic structure in wood to achieve high flame retardancy

As green renewable resources, wood and its composites are widely used in the construction field, which puts forward higher requirements for their flame-retardant performance. In this study, a high-temperature hydrothermal crystallization method for in situ constructing an epoxy crosslinked Si–Al zeolite-like structural wood composite (WZLC) was reported. Under the action of amine guiding agents and epoxy resin, the zeolite-like catalytic structure constructed in poplar wood comprised negative electrocatalytic sites, which can efficiently catalyze the formation of the carbon layer and endow WZLC with excellent flame retardant, smoke-suppression, and self-extinguishing properties. Compared with the untreated wood (WN), the thermal stability of the treated wood (WZLC) was greatly improved, and the amount of volatile organic compounds released during the decomposition process was significantly reduced. The heat release rate, total heat release, smoke production rate, and total smoke production of WZLC1 decreased by 50.23%, 44.14%, 45.21%, and 28.46%, respectively. Particularly, CO and CO2 yields of WZLC significantly decreased by 92.26% and 92.02%, respectively, indicating that the Si–Al zeolite-like catalytic structure displayed excellent catalytic flame retardant properties, which can effectively decrease the thermal decomposition rate and combustion risk of the WZLC. This method uses less flame retardants to achieve a good flame retardant and smoke suppression effect, thereby reducing the risk of environmental pollution caused by too many flame retardants.

Tailor-made fermentation of sourdough reduces the acrylamide content in rye crispbread and improves its sensory and nutritional characteristics

Thirty strains of lactic acid bacteria (LAB) and Saccharomyces cerevisiae E8.9 (wild type) were used to formulate fifteen combinations of starters by mixing two or three LAB with the yeast (ratio LAB: yeast, 10: 1). Such combinations were used to prepare rye sourdough and their performance in term of acidification and biochemical characteristics during fermentation at two temperatures (30 and 37 °C) and duration (4 and 8 h) were screened. The best thirteen sourdough formulations were selected and used for rye crispbread making. The analysis of acrylamide concentration demonstrated that 11 out 13 formulations resulted in significant decreases of concentration compared to the baker's yeast (control), with reductions up to 79.6 %. The rye sourdough crispbreads showed also higher amount of volatile organic compounds (VOCs) compared to the baker's yeast control. Two rye sourdough crispbreads, selected to represent the opposite extremes within the thirteen formulations in term of VOC profiles and fermentation performances, demonstrated better sensory and nutritional features, such as phytic acid reduction (up to 47.3 %), and enhanced total free amino acid compared to the control. These evidences suggest the potential of tailored sourdough fermentations as alternative and suitable biotechnological strategy for lowering acrylamide levels in rye crispbread.