Quantitative Trait Loci Regions Research Articles

Weighted genome-wide association study reveals new candidate genes related to boar taint compounds 1

The weighted single-step genome-wide association study (WssGWAS) and post-GWAS analysis may be a useful tool to identify quantitative trait loci (QTL) and candidate genes linked to economically important phenotypes, such as boar taint in pigs. The boar taint is an unpleasant taste and smell observable at uncastrated pork cooking. Therefore, we aimed to identify QTL regions and pinpoint candidate genes associated with boar taint compounds applying a WssGWAS. In this study, we analyzed phenotypic records of androstenone, skatole and indole levels (AND, SKA and IND, respectively) recorded on 4,922 animals from three pig sire lines. From these animals, a total of 3,749 were genotyped. This dataset was used to perform a WssGWAS analysis. A total of 16 windows, explaining 0.5% or more of the genetic variance of boar taint compounds, were identified (5, 4 and 7 for AND, SKA and IND, respectively) at Sus scrofa chromosomes 1, 2, 3, 5, 6, 10 12, 15 and 17. Together, these windows explained 2.90%, 2.15% and 4.47% of the genetic variance of AND, SKA or IND, respectively. A total of 128 genes located in the significant QTL regions were identified. Five new candidate genes (CDK4, CRHBP, CTDSP2, CYP27B1 and SDR4E1) were identified as linked to boar taint compounds. In addition, we also find the HSD17B2 gene, which has already been described in literature as associated with the studied traits. These genes should be better studied looking to understand the boar taint occurrence and selection against that.

Linkage mapping and QTL analysis of growth traits in Rhopilema esculentum

R. esculentum is a popular seafood in Asian countries and an economic marine fishery resource in China. However, the genetic linkage map and growth-related molecular markers are still lacking, hindering marker assisted selection (MAS) for genetic improvement of R. esculentum. Therefore, we firstly used 2b-restriction site-associated DNA (2b-RAD) method to sequence 152 R. esculentum specimens and obtained 9100 single nucleotide polymorphism (SNP) markers. A 1456.34 cM linkage map was constructed using 2508 SNP markers with an average interval of 0.58 cM. Then, six quantitative trait loci (QTLs) for umbrella diameter and body weight were detected by QTL analysis based on the new linkage map. The six QTLs are located on four linkage groups (LGs), LG4, LG13, LG14 and LG15, explaining 9.4% to 13.4% of the phenotypic variation. Finally, 27 candidate genes in QTLs regions of LG 14 and 15 were found associated with growth and one gene named RE13670 (sushi, von Willebrand factor type A, EGF and pentraxin domain-containing protein 1-like) may play an important role in controlling the growth of R. esculentum. This study provides valuable information for investigating the growth mechanism and MAS breeding in R. esculentum.

New insights into flowering date in Prunus: fine mapping of a major QTL in sweet cherry.

Flowering date is an important trait in Prunus fruit species, especially for their adaptation in a global warming context. Numerous quantitative trait loci (QTLs) have been identified and a major one was previously located on LG4. The objectives of this study were to fine-map this QTL in sweet cherry, to identify robust candidate genes by using the new sweet cherry genome sequence of the cultivar “Regina” and to define markers usable in marker-assisted selection (MAS). We performed QTL analyses on two populations derived from crosses using cultivars “Regina” and “Garnet” as parents. The first one (n = 117) was phenotyped over ten years, while the second one (n = 1386) was evaluated during three years. Kompetitive allele specific PCR (KASP) markers located within the QTL region on LG4 were developed and mapped within this region, consisting in the first fine mapping in sweet cherry. The QTL interval was narrowed from 380 kb to 68 kb and candidate genes were identified by using the genome sequence of “Regina”. Their expression was analyzed from bud dormancy period to flowering in cultivars “Regina” and “Garnet”. Several genes, such as PavBOI-E3, PavSR45a and PavSAUR71, were differentially expressed in these two cultivars and could be then considered as promising candidate genes. Two KASP markers were validated using a population derived from a cross between cultivars “Regina” and “Lapins” and two collections, including landraces and modern cultivars. Thanks to the high synteny within the Prunus genus, these results give new insights into the control of flowering date in Prunus species and pave the way for the development of molecular breeding strategies.

Construction of a high-density bin-map and identification of fruit quality-related quantitative trait loci and functional genes in pear.

Pear (Pyrus spp.) is one of the most common fruit crops grown in temperate regions worldwide. Genetic enhancement of fruit quality is a fundamental goal of pear breeding programs. The genetic control of pear fruit quality traits is highly quantitative, and development of high-density genetic maps can facilitate fine-mapping of quantitative trait loci (QTLs) and gene identification. Bin-mapping is a powerful method of constructing high-resolution genetic maps from large-scale genotyping datasets. We performed whole-genome sequencing of pear cultivars ‘Niitaka’ and ‘Hongxiangsu’ and their 176 F1 progeny to identify genome-wide single-nucleotide polymorphism (SNP) markers for constructing a high-density bin-map of pear. This analysis yielded a total of 1.93 million SNPs and a genetic bin-map of 3190 markers spanning 1358.5 cM, with an average adjacent interval of 0.43 cM. This bin-map, along with other high-density genetic maps in pear, improved the reference genome assembly from 75.5 to 83.7% by re-anchoring the scaffolds. A quantitative genetic analysis identified 148 QTLs for 18 fruit-related traits; among them, QTLs for stone cell content, several key monosaccharides, and fruit pulp acids were identified for the first time in pear. A gene expression analysis of six pear cultivars identified 399 candidates in the identified QTL regions, which showed expression specific to fruit developmental stages in pear. Finally, we confirmed the function of PbrtMT1, a tonoplast monosaccharide transporter-related gene responsible for the enhancement of fructose accumulation in pear fruit on linkage group 16, in a transient transformation experiment. This study provides genomic and genetic resources as well as potential candidate genes for fruit quality improvement in pear.

Association analysis and functional annotation of imputed sequence data within genomic regions influencing resistance to gastro-intestinal parasites detected by an LDLA approach in a nucleus flock of Sarda dairy sheep

BackgroundGastroinestinal nematodes (GIN) are one of the major health problem in grazing sheep. Although genetic variability of the resistance to GIN has been documented, traditional selection is hampered by the difficulty of recording phenotypes, usually fecal egg count (FEC). To identify causative mutations or markers in linkage disequilibrium (LD) to be used for selection, the detection of quantitative trait loci (QTL) for FEC based on linkage disequilibrium-linkage analysis (LDLA) was performed on 4097 ewes (from 181 sires) all genotyped with the OvineSNP50 Beadchip. Identified QTL regions (QTLR) were imputed from whole-genome sequences of 56 target animals of the population. An association analysis and a functional annotation of imputed polymorphisms in the identified QTLR were performed to pinpoint functional variants with potential impact on candidate genes identified from ontological classification or differentially expressed in previous studies.ResultsAfter clustering close significant locations, ten QTLR were defined on nine Ovis aries chromosomes (OAR) by LDLA. The ratio between the ANOVA estimators of the QTL variance and the total phenotypic variance ranged from 0.0087 to 0.0176. QTL on OAR4, 12, 19, and 20 were the most significant. The combination of association analysis and functional annotation of sequence data did not highlight any putative causative mutations. None of the most significant SNPs showed a functional effect on genes’ transcript. However, in the most significant QTLR, we identified genes that contained polymorphisms with a high or moderate impact, were differentially expressed in previous studies, contributed to enrich the most represented GO process (regulation of immune system process, defense response). Among these, the most likely candidate genes were: TNFRSF1B and SELE on OAR12, IL5RA on OAR19, IL17A, IL17F, TRIM26, TRIM38, TNFRSF21, LOC101118999, VEGFA, and TNF on OAR20.ConclusionsThis study performed on a large experimental population provides a list of candidate genes and polymorphisms which could be used in further validation studies. The expected advancements in the quality of the annotation of the ovine genome and the use of experimental designs based on sequence data and phenotypes from multiple breeds that show different LD extents and gametic phases may help to identify causative mutations.

The evolution of larger size in high-altitude Drosophila melanogaster has a variable genetic architecture.

Important uncertainties persist regarding the genetic architecture of adaptive trait evolution in natural populations, including the number of genetic variants involved, whether they are drawn from standing genetic variation, and whether directional selection drives them to complete fixation. Here, we take advantage of a unique natural population of Drosophila melanogaster from the Ethiopian highlands, which has evolved larger body size than any other known population of this species. We apply a bulk segregant quantitative trait locus mapping approach to 4 unique crosses between highland Ethiopian and lowland Zambian populations for both thorax length and wing length. Results indicated a persistently variable genetic basis for these evolved traits (with largely distinct sets of quantitative trait loci for each cross), and at least a moderately polygenic architecture with relatively strong effects present. We complemented these mapping experiments with population genetic analyses of quantitative trait locus regions and gene ontology enrichment analysis, generating strong hypotheses for specific genes and functional processes that may have contributed to these adaptive trait changes. Finally, we find that the genetic architectures indicated by our quantitative trait locus mapping results for size traits mirror those from similar experiments on other recently evolved traits in this species. Collectively, these studies suggest a recurring pattern of polygenic adaptation in this species, in which causative variants do not approach fixation and moderately strong effect loci are present.

QTL-seq analysis of the seed size trait in grape provides new molecular insights on seedlessness

Seedlessness in grape (Vitis vinifera) is an important commercial trait for both the fresh and drying markets. However, despite numerous studies, the mechanisms and key genes regulating grape seedlessness are mostly unknown. In this study, we sequenced the genomes of the V. vinifera seeded cultivar ‘Red Globe’, the seedless cultivar 'Centennial Seedless’, and the derived hybrids. Nonsynonymous single nucleotide polymorphisms (SNPs) were identified by genome sequencing and analyzed using published transcriptome data. Nonsynonymous SNPs occurred in genes related to seed development, which were identified as protein kinases, transcription factors, and cytochrome P450s and showed differential expression during ovule development in both seeded and seedless grapes. These nonsynonymous SNP-associated genes were mainly involved in biological processes such as hormone balance, seed coat and endosperm development, reproductive organ development, oxidation and reduction, senescence and cell death. A potential quantitative trait locus (QTL) region associated with seed size was characterized based on the SNP-index, and expression analysis of candidate genes in the QTL region during ovule development in multiple seeded and seedless grape cultivars were conducted. Three SNPs were further subjected to SNaPshot analysis and one SNP in G8 showed 67.5% efficiency in the grape progeny validation. Overall, the data obtained in this study shed light on the differences in seed development between seeded and seedless progeny at the genomic level, which provides valuable resources for future functional studies and grape breeding.

Identification of Sclerotinia stem rot resistance quantitative trait loci in a chickpea (Cicer arietinum) recombinant inbred line population.

Sclerotinia stem rot (SSR), caused by Sclerotinia sclerotiorum , is one of the most economically devastating diseases in chickpea (Cicer arietinum L.). No complete resistance is available in chickpea to this disease, and the inheritance of partial resistance is not understood. Two hundred F7 recombinant inbred lines (RILs) derived from a cross between a partially resistant variety PBA HatTrick, and a highly susceptible variety Kyabra were characterised for their responses to SSR inoculation. Quantitative trait locus (QTL) analysis was conducted for the area under the disease progress curve (AUDPC) after RIL infection with S. sclerotiorum . Four QTLs on chromosomes, Ca4 (qSSR4-1, qSSR4-2), Ca6 (qSSR6-1) and Ca7 (qSSR7-1), individually accounted for between 4.2 and 15.8% of the total estimated phenotypic variation for the response to SSR inoculation. Candidate genes located in these QTL regions are predicted to be involved in a wide range of processes, including phenylpropanoid biosynthesis, plant-pathogen interaction, and plant hormone signal transduction. This is the first study investigating the inheritance of resistance to S. sclerotiorum in chickpea. Markers associated with the identified QTLs could be employed for marker-assisted selection in chickpea breeding.

Rapid Identification of a Stripe Rust Resistance Gene YrXK in Chinese Wheat Line Xike01015 Using Specific Locus Amplified Fragment (SLAF) Sequencing.

Wheat stripe rust, an airborne fungal disease caused by Puccinia striiformis Westend. f. sp. tritici, is one of the most devastating diseases of wheat. Chinese wheat cultivar Xike01015 displays high levels of all-stage resistance (ASR) to the current predominant P. striiformis f. sp. tritici race CYR33. In this study, a single dominant gene, designated YrXk, was identified in Xike01015 conferring resistance to CYR33 with genetic analysis of F2 and BC1 populations from a cross of Mingxian169 (susceptible) and Xike01015. The specific length amplified fragment sequencing (SLAF-seq) strategy was used to construct a linkage map in the F2 population. Quantitative trait loci (QTL) analysis mapped YrXk to a 12.4-Mb segment on chromosome1 BS, explaining >86.96% of the phenotypic variance. Gene annotation in the QTL region identified three differential expressed candidate genes, TraesCS1B02G168600.1, TraesCS1B02G170200.1, and TraesCS1B02G172400.1. The qRT-PCR results showed that TraesCS1B02G172400.1 and TraesCS1B02G168600.1 are upregulated and that TraesCS1B02G170200.1 is slightly downregulated after inoculation with CYR33 in the seedling stage, which indicates that these genes may function in wheat resistance to stripe rust. The results of this study can be used in wheat breeding for improving resistance to stripe rust.

A genome-wide association study (GWAS) identifies multiple loci linked with the natural variation for Al3+ resistance in Brassica napus.

Acid soils limit yields of many important crops including canola (Brassica napus ), Australia's third largest crop. Aluminium (Al3+ ) stress is the main cause of this limitation primarily because the toxic Al3+ present inhibits root growth. Breeding programmes do not target acid-soil tolerance in B. napus because genetic variation and convincing quantitative trait loci have not been reported. We conducted a genome-wide association study (GWAS) using the BnASSYST diversity panel of B. napus genotyped with 35 729 high-quality DArTseq markers. We screened 352 B. napus accessions in hydroponics with and without a toxic concentration of AlCl3 (12μM, pH 4.3) for 12days and measured shoot biomass, root biomass, and root length. By accounting for both population structure and kinship matrices, five significant quantitative trait loci for different measures of resistance were identified using incremental Al3+ resistance indices. Within these quantitative trait locus regions of B. napus , 40 Arabidopsis thaliana gene orthologues were identified, including some previously linked with Al3+ resistance. GWAS analysis indicated that multiple genes are responsible for the natural variation in Al3+ resistance in B. napus . The results provide new genetic resources and markers to enhance that Al3+ resistance of B. napus germplasm via genomic and marker-assisted selection.

Resistance of the Wheat Cultivar 'Renan' to Septoria Leaf Blotch Explained by a Combination of Strain Specific and Strain Non-Specific QTL Mapped on an Ultra-Dense Genetic Map.

Quantitative resistance is considered more durable than qualitative resistance as it does not involve major resistance genes that can be easily overcome by pathogen populations, but rather a combination of genes with a lower individual effect. This durability means that quantitative resistance could be an interesting tool for breeding crops that would not systematically require phytosanitary products. Quantitative resistance has yet to reveal all of its intricacies. Here, we delve into the case of the wheat/Septoria tritici blotch (STB) pathosystem. Using a population resulting from a cross between French cultivar Renan, generally resistant to STB, and Chinese Spring, a cultivar susceptible to the disease, we built an ultra-dense genetic map that carries 148,820 single nucleotide polymorphism (SNP) markers. Phenotyping the interaction was done with two different Zymoseptoria tritici strains with contrasted pathogenicities on Renan. A linkage analysis led to the detection of three quantitative trait loci (QTL) related to resistance in Renan. These QTL, on chromosomes 7B, 1D, and 5D, present with an interesting diversity as that on 7B was detected with both fungal strains, while those on 1D and 5D were strain-specific. The resistance on 7B was located in the region of Stb8 and the resistance on 1D colocalized with Stb19. However, the resistance on 5D was new, so further designated Stb20q. Several wall-associated kinases (WAK), nucleotide-binding and leucine-rich repeats (NB-LRR) type, and kinase domain carrying genes were present in the QTL regions, and some of them were expressed during the infection. These results advocate for a role of Stb genes in quantitative resistance and for resistance in the wheat/STB pathosystem being as a whole quantitative and polygenic.

Genome-wide association study with imputed whole-genome sequence variants including large deletions for female fertility in 3 Nordic dairy cattle breeds

Fertility is an economically important trait in livestock. Poor fertility in dairy cattle can be due to loss-of-function variants affecting any essential gene that causes early embryonic mortality in homozygotes. To identify fertility-associated quantitative trait loci, we performed single-marker association analyses for 8 fertility traits in Holstein, Jersey, and Nordic Red Dairy cattle using imputed whole-genome sequence variants including SNPs, indels, and large deletion. We then performed stepwise selection of independent markers from GWAS loci using conditional and joint association analyses. From single-marker analyses for fertility traits, we reported genome-wide significant associations of 30,384 SNPs, 178 indels, and 3 deletions in Holstein; 23,481 SNPs, 189 indels, and 13 deletions in Nordic Red; and 17 SNPs in Jersey cattle. Conditional and joint association analyses identified 37 and 23 independent associations in Holstein and Nordic Red Dairy cattle, respectively. Fertility-associated GWAS loci were enriched for developmental and cellular processes (Gene Ontology enrichment, false discovery rate < 0.05). For these quantitative trait loci regions (top marker and 500 kb of surrounding regions), we proposed several candidate genes with functional annotations corresponding to embryonic lethality and various fertility-related phenotypes in mouse and cattle. The inclusion of these top markers in future releases of the custom SNP chip used for genomic evaluations will enable their validation in independent populations and improve the accuracy of genomic predictions.

Unravelling Rubber Tree Growth by Integrating GWAS and Biological Network-Based Approaches.

Hevea brasiliensis (rubber tree) is a large tree species of the Euphorbiaceae family with inestimable economic importance. Rubber tree breeding programs currently aim to improve growth and production, and the use of early genotype selection technologies can accelerate such processes, mainly with the incorporation of genomic tools, such as marker-assisted selection (MAS). However, few quantitative trait loci (QTLs) have been used successfully in MAS for complex characteristics. Recent research shows the efficiency of genome-wide association studies (GWAS) for locating QTL regions in different populations. In this way, the integration of GWAS, RNA-sequencing (RNA-Seq) methodologies, coexpression networks and enzyme networks can provide a better understanding of the molecular relationships involved in the definition of the phenotypes of interest, supplying research support for the development of appropriate genomic based strategies for breeding. In this context, this work presents the potential of using combined multiomics to decipher the mechanisms of genotype and phenotype associations involved in the growth of rubber trees. Using GWAS from a genotyping-by-sequencing (GBS) Hevea population, we were able to identify molecular markers in QTL regions with a main effect on rubber tree plant growth under constant water stress. The underlying genes were evaluated and incorporated into a gene coexpression network modelled with an assembled RNA-Seq-based transcriptome of the species, where novel gene relationships were estimated and evaluated through in silico methodologies, including an estimated enzymatic network. From all these analyses, we were able to estimate not only the main genes involved in defining the phenotype but also the interactions between a core of genes related to rubber tree growth at the transcriptional and translational levels. This work was the first to integrate multiomics analysis into the in-depth investigation of rubber tree plant growth, producing useful data for future genetic studies in the species and enhancing the efficiency of the species improvement programs.

Variation in the promoter of the sorbitol dehydrogenase gene MdSDH2 affects binding of the transcription factor MdABI3 and alters fructose content in apple fruit.

Fructose (Fru) content is a key determinant of fruit sweetness and quality. An F1 hybrid population of the apple cultivars 'Honeycrisp' × 'Qinguan' was used to investigate the quantitative trait locus (QTL) regions and genes controlling Fru content in fruit. A stable QTL on linkage group (LG) 01 in 'Honeycrisp' was detected on the single nucleotide polymorphism (SNP) genetic linkage maps. In this region, a sorbitol dehydrogenase (SDH) gene, MdSDH2, was detected and showed promoter variations and differential expression patterns between 'Honeycrisp' and 'Qinguan' fruits as well as their hybrids. A SNP variant (A/G) in the MdSDH2 promoter region (SDH2p-491) affected the binding ability of the transcription factor MdABI3, which can affect the expression of MdSDH2. Promoter sequences with an A nucleotide at SDH2p-491 had stronger binding affinity for MdABI3 than those with a G. Among 27 domesticated apple cultivars and wild relatives, this SNP (A/G) was associated with Fru content. Our results indicate that MdSDH2 can alter Fru content as the major regulatory gene and that ABA signaling might be involved in Fru content accumulation in apple fruit.

Detection of drought tolerance-related QTL in the Plainsman V./Cappelle Desprez doubled haploid wheat population

Drought stress is one of the major abiotic factors that significantly reduces wheat grain yield. Improving drought tolerance is a challenge that plant breeders are facing nowadays. In this study, our goal was to identify quantitative trait loci (QTL) in the Plainsman V./Cappelle Desprez doubled haploid (DH) population under drought induced as decreased irrigation (ds) and well-watered (ww) conditions in glasshouse. In total, 54 QTL were detected across the three years in two water regimes linked to 10 drought tolerance-related agronomic traits. Out of the detected QTL regions several have been previously reported. The QTL on chromosome 1A (wPt-744613-wPt-8016) related to thousand grain weight was detected in both ds and ww conditions, explaining the 12.7–17.4% of the phenotypic variance. QTL for grain yield was detected on chromosomes 1A, and 6B in the ds treatment. Numerous QTL was identified under both irrigation levels.

Novel Quantitative Trait Loci for Grain Cadmium Content Identified in Hard White Spring Wheat.

Cadmium (Cd) is a heavy metal that can cause a variety of adverse effects on human health, including cancer. Wheat comprises approximately 20% of the human diet worldwide; therefore, reducing the concentrations of Cd in wheat grain will have significant impacts on the intake of Cd in food products. The tests for measuring the Cd content in grain are costly, and the content is affected significantly by soil pH. To facilitate breeding for low Cd content, this study sought to identify quantitative trait loci (QTL) and associated molecular markers that can be used in molecular breeding. One spring wheat population of 181 doubled haploid lines (DHLs), which was derived from a cross between two hard white spring wheat cultivars “UI Platinum” (UIP) and “LCS Star” (LCS), was assessed for the Cd content in grain in multiple field trials in Southeast Idaho, United States. Three major QTL regions, namely, QCd.uia2-5B, QCd.uia2-7B, and QCd.uia2-7D, were identified on chromosomes 5B, 7B, and 7D, respectively. All genes in these three QTL regions were identified from the NCBI database. However, three genes related to the uptake and transport of Cd were used in the candidate gene analysis. The sequences of TraesCS5B02G388000 (TaHMA3) in the QCd.uia2-5B region and TraesCS7B02G320900 (TaHMA2) and TraesCS7B02G322900 (TaMSRMK3) in the QCd.uia2-7B region were compared between UIP and LCS. TaHMA2 on 7B is proposed for the first time as a candidate gene for grain Cd content in wheat. A KASP marker associated with this gene was developed and it will be further validated in near-isogenic lines via a gene-editing system in future studies.

Mapping novel QTLs for yield related traits from a popular rice hybrid KRH-2 derived doubled haploid (DH) population.

The online version contains supplementary material available at 10.1007/s13205-021-03045-7.

Genome-wide Association Study for Carcass Primal Cut Yields Using Single-step Bayesian Approach in Hanwoo Cattle

The importance of meat and carcass quality is growing in beef cattle production to meet both producer and consumer demands. Primal cut yields, which reflect the body compositions of carcass, could determine the carcass grade and, consequently, command premium prices. Despite its importance, there have been few genome-wide association studies on these traits. This study aimed to identify genomic regions and putative candidate genes related to 10 primal cut traits, including tenderloin, sirloin, striploin, chuck, brisket, top round, bottom round, shank, flank, and rib in Hanwoo cattle using a single-step Bayesian regression (ssBR) approach. After genomic data quality control, 43,987 SNPs from 3,745 genotyped animals were available, of which 3,467 had phenotypic records for the analyzed traits. A total of 16 significant genomic regions (1-Mb window) were identified, of which five large-effect quantitative trait loci (QTLs) located on chromosomes 6 at 38–39 Mb, 11 at 21–22 Mb, 14 at 6–7 Mb and 26–27 Mb, and 19 at 26–27 Mb were associated with more than one trait, while the remaining 11 QTLs were trait-specific. These significant regions were harbored by 154 genes, among which TOX, FAM184B, SPP1, IBSP, PKD2, SDCBP, PIGY, LCORL, NCAPG, and ABCG2 were noteworthy. Enrichment analysis revealed biological processes and functional terms involved in growth and lipid metabolism, such as growth (GO:0040007), muscle structure development (GO:0061061), skeletal system development (GO:0001501), animal organ development (GO:0048513), lipid metabolic process (GO:0006629), response to lipid (GO:0033993), metabolic pathways (bta01100), focal adhesion (bta04510), ECM–receptor interaction (bta04512), fat digestion and absorption (bta04975), and Rap1 signaling pathway (bta04015) being the most significant for the carcass primal cut traits. Thus, identification of quantitative trait loci regions and plausible candidate genes will aid in a better understanding of the genetic and biological mechanisms regulating carcass primal cut yields.

Identification and verification of grain shape QTLs by SNP array in rice.

Grain shape strongly influences the economic value and grain yield of rice. Thus, identifying quantitative trait loci (QTLs) for grain shape has been a longstanding goal in rice genetic research and breeding programs. Single nucleotide polymorphism (SNP) markers are ubiquitous in the rice genome and are more abundant and evenly distributed on the 12 rice chromosomes than traditional markers. An F2 population was genotyped using the RICE6K SNP array to elucidate the mechanisms governing grain shape. Thirty-five QTLs for grain shape were detected on 11 of 12 chromosomes over 2 years. The major QTL cluster qGS7 was detected in both years and displayed strong genetic effects on grain length and width, showing consistency with GL7/GW7. Some minor QTLs were also detected, and the effects of four QTLs on seed size were then validated using BC1F6 populations with residual heterozygous lines in each QTL region. Our findings provide insights into the molecular basis of grain shape as well as additional resources and approaches for producing hybrid high-yield rice varieties.

Identification and molecular mapping of a major quantitative trait locus underlying branch angle in soybean.

A major quantitative trait locus (QTL) modulating soybean (Glycine max) branch angle was identified by linkage analysis using two bi-parental mapping populations with and without pedigree from wild soybean (Glycine soja). Soybean branch angle is a critical architectural trait that affects many other traits of agronomic importance associated with the plant's productivity and grain yield and is thus a vital consideration in soybean breeding. However, the genetic basis for modulating this important trait in soybean and many other crops remain unknown. Previously, we developed a recombinant inbred line (RIL) population derived from a cross between a domesticated soybean (Glycine max) variety, Williams 82, and a wild soybean (Glycine soja) accession, PI 479,752, and observed drastic variation in plant architecture including branch angle among individual RILs. In this study, one of the RILs possessing extremely wide branch angle (WBA) was crossed with an elite soybean cultivar (LD00-3309) possessing narrow branch angle (NBA) to produce an F2 population composed of 147 plants and F2-derived F3 families for inheritance analysis and QTL mapping. We found that branch angle is controlled by a major QTL located on chromosome 19, designated qGmBa1 and that WBA-derived from the wild soybean accession-is dominant over NBA. This locus was also detected as a major one underlying branch angle by QTL mapping using a subset of the soybean nested association mapping (SoyNAM) population composed of 140 RILs, which were derived from a cross between a landrace, PI 437169B, possessing WBA and an elite variety, IA3023, possessing NBA. Molecular markers located in the QTL region defined by both mapping populations can be used for marker-assisted selection of branch angle in soybean breeding.