Quantitative Density Functional Theory Research Articles

Boosting photocatalytic overall water splitting performance by dual-metallic single Ni and Pd atoms decoration of MoS2: A DFT study

Herein, we propose a novel MoS2 supported single Ni and Pb atoms catalyst (Ni/Pd@MoS2), on which the enhanced efficiency of water splitting is confirmed by quantitative density functional theory (DFT) calculations. The Bader charge, electron density difference (EDD) and projected density of state (PDOS) analysis demonstrates that the moderate electron transfer is reached by the synergy of the Ni atom and the Pd atom. As extra channel for excited carrier migration, the present of defect states obviously prolongs the carrier lifetime (143.45 ps). The unique electronic environment contributes to the electronic synergy and spatially separated of the effective active sites, leading the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) happen smoothly on the Pd and S site, respectively. Our research presents a novel idea for the development of highly efficient diatomic catalysts towards overall water splitting.

Regulating photosalient behavior in dynamic metal-organic crystals

Dynamic photoactuating crystals have become a sensation due to their potential applications in developing smart medical devices, molecular machines, artificial muscles, flexible electronics actuators, probes and microrobots. Here we report the synthesis of two iso-structural metal-organic crystals, [Zn(4-ohbz)2(4-nvp)2] (1) and [Cd(4-ohbz)2(4-nvp)2] (2) {H4-ohbz = 4-hydroxy benzoic acid; 4-nvp = 4-(1-naphthylvinyl)pyridine} which undergo topochemical [2 + 2] cycloaddition under UV irradiation as well as sunlight to generate a dimerized product of discrete metal-complex [Zn(4-ohbz)2(rctt-4-pncb)] {rctt-4-pncb = 1,3-bis(4′-pyridyl)-2,4-bis(naphthyl)cyclobutane} (1′) and one-dimensional coordination polymer (1D CP) [Cd(4-ohbz)2(rctt-4-pncb)] (2′) respectively, in a single-crystal-to-single-crystal (SCSC) process. The Zn-based compound demonstrates photosalient behaviour, wherein crystals show jumping, splitting, rolling, and swelling upon UV irradiation. However, the Cd-based crystals do not show such behaviour maintaining the initial supramolecular packing and space group. Thus the photomechanical behaviour can be induced by choosing a suitable metal ion. The above findings are thoroughly validated by quantitative density functional theory (DFT) calculations which show that the Zn-based crystal shifts towards an orthorhombic structure to resolve the anisotropic UV-induced mechanical strain. Furthermore, the mechano-structure-property relationship has been established by complimentary nanoindentation measurements, which are in-line with the DFT-predicted single crystal values.

Understanding Terminal versus Bridging End-on N2 Coordination in Transition Metal Complexes.

Terminal and bridging end-on coordination of N2 to transition metal complexes offer possibilities for distinct pathways in ammonia synthesis and N2 functionalization. Here we elucidate the fundamental factors controlling the two binding modes and determining which is favored for a given metal-ligand system, using both quantitative density functional theory (DFT) and qualitative molecular orbital (MO) analyses. The Gibbs free energy for converting two terminal MN2 complexes into a bridging MNNM complex and a free N2 molecule (2ΔGeq°) is examined through systematic variations of the metal and ligands; values of ΔGeq° range between +9.1 and -24.0 kcal/mol per M-N2 bond. We propose a model that accounts for these broad variations by assigning a fixed π-bond order (BOπ) to the triatomic terminal MNN moiety that is equal to that of the free N2 molecule, and a variable BOπ to the bridging complexes based on the character (bonding or antibonding) and occupancy of the π-MOs in the tetratomic MNNM core. When the conversion from terminal to bridging coordination and free N2 is associated with an increase in the number of π-bonds (ΔBOeqπ > 0), the bridging mode is greatly favored; this condition is satisfied when each metal provides 1, 2, or 3 electrons to the π-MOs of the MNNM core. When each metal in the bridging complex provides 4 electrons to the MNNM π-MOs, ΔBOeqπ = 0; the equilibrium in this case is approximately ergoneutral and the direction can be shifted by dispersion interactions.

Reaction Path Analysis of CO2 Reduction to Methanol through Multisite Microkinetic Modelling over Cu/ZnO/Al2O3 Catalysts

The changing hierarchical structure of the applied heterogeneous Cu/ZnO/Al2O3 material during methanol synthesis reactions hinders an efficient engineered process condition optimization, causing sub-optimal functional performance. A robust literature comparison is conducted to determine that activity is tightly coupled with Cu–Zn interactions. In order to investigate this physical behaviour further, characteristic experimental data is acquired through the catalytic reactor tests with an activated commercial catalyst, aged at different input measurements, monitored and characterized by the Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), scanning transmission electron microscopy (STEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), H2 transient adsorption (TA) and N2O pulsed surface oxidation (PSO) methodologies. It is shown that apparent rate law, exponents and activation energies do not vary significantly by increasing the ZnOX coverage from 7% to 23 %, while not all of ZnOX over-layer is catalytically active. For Cu/ZnO/Al2O3 with ZnOX over 7%, a highly-dispersed Al2O3 decreases the measured intrinsic kinetics of the Cu–Zn site, implying a steric hindrance effect. Finally, building on unveiled chemical relations, a thorough multisite system micro-kinetic model, based on systematic contribution analysis, mechanisms and quantitative density functional theory (DFT) constants is developed. Values were optimized using the sequential screening results for an industrially relevant application (the temperatures of 160–260 °C, 50 bar pressure, 12,000–200,000 h–1 gas hourly space velocity (GHSV) flow and relative feed compositions).Designed mathematical relationships can therefore be utilised to accurately predict the turnover, selectivity and stability/deactivation in correspondence to ZnOX over Cu.

Studies on the Kinetics of Doxazosin Degradation in Simulated Environmental Conditions and Selected Advanced Oxidation Processes

The photochemical behavior of doxazosin (DOX) in simulated environmental conditions using natural waters taken from local rivers as a solvent was studied. The chemical characteristics of applied waters was done and a correlation analysis was used to explain the impact of individual parameters of matrix on the rate of the DOX degradation. It was stated that DOX is a photoliable compound in an aqueous environment. Its degradation is promoted by basic medium, presence of environmentally important ions such as Cl−, NO3−, SO42− and organic matter. The kinetics of DOX reactions with OH− and SO4− radicals were examined individually. The UV/H2O2, classical Fenton and photo-Fenton processes, were applied for the generation of hydroxyl radicals while the UV/VIS:Fe2(SO4)3:Na2SO2 system was employed for production of SO4− radicals. The obtained results pointed that photo-Fenton, as well as UV/VIS:Fe2(SO4)3:Na2SO2, are very reactive in ratio to DOX, leading to its complete degradation in a short time. A quantitative density functional theory (DFT) mechanistic study was carried out in order to explain the molecular mechanism of DOX degradation using the GAUSSIAN 09 program.

Orbital Control of Single-Molecule Conductance Perturbed by π-Accepting Anchor Groups: Cyanide and Isocyanide

Electron transport properties through benzene molecules disubstituted with π-accepting cyanide and isocyanide anchor groups at their para and meta positions are investigated on the basis of a qualitative orbital analysis at the Hückel molecular orbital level of theory. The applicability of a previously derived orbital symmetry rule for electron transport is extended to the systems perturbed by the π-accepting anchor groups, where the HOMO–LUMO symmetry in the molecular orbital energies relative to the Fermi level is removed. The conservation of the HOMO–LUMO symmetry in the spatial distribution of the molecular orbitals between the unperturbed benzene molecule and the perturbed molecules with the anchor groups rationalizes symmetry-allowed electron transport through the para isomers. On the other hand, destructive interferences between the nearly 2-fold degenerate frontier orbitals constructed from the 2-fold degenerate orbitals of the unperturbed benzene molecule and the anchor groups lead to symmetry-forbidden electron transport through the meta isomers. The qualitative orbital thinking is supported by more quantitative density functional theory (DFT) calculations combined with the nonequilibrium Green’s function (NEGF) method. The orbital analysis is a powerful tool for the understanding and rational design of molecular devices composed of π-conjugated hydrocarbons and those perturbed by the π-accepting anchor groups.