Quadrupole Ion Trap Mass Spectrometry Research Articles

Accurate and High-Resolution Particle Mass Measurement Using a Peak Filtering Algorithm.

Charge detection quadrupole ion trap mass spectrometry (CD-QIT MS) is an effective way of achieving the mass analysis of microparticles with ultrahigh mass. However, its mass accuracy and resolution are still poor. To enhance the performance of CD-QIT MS, the resolution Rpeak of each peak in the mass spectra resulting from an individual particle was assessed, and a peak filtering algorithm that can filter out particle adducts and clusters with a lower Rpeak was proposed. By using this strategy, more accurate mass information about the analyzed particles could be obtained, and the mass resolution of CD-QIT MS was improved by nearly 2-fold, which was demonstrated by using the polystyrene (PS) particle size standards and red blood cells (RBCs). Benefiting from these advantages of the peak filtering algorithm, the baseline separation and relative quantification of 3 and 4 μm PS particles were achieved. To prove the application value of this algorithm in a biological system, the mass of yeast cells harvested at different times was measured, and it was found that the mixed unbudded and budded yeast cells, which otherwise would not be differentiable, were distinguished and quantified with the algorithm.

Carbon-Atom Exchange between [MC2]+ (M = Os and Ir) and Methane: on the Thermodynamic and Dynamic Aspects.

Gas-phase reactions of [OsC2]+ and [IrC2]+ with methane at ambient temperature have been studied using quadrupole-ion trap mass spectrometry combined with quantum chemical calculations. Both [OsC2]+ and [IrC2]+ undergo carbon-atom exchange reactions with methane. The associated mechanisms for the two systems are found to be similar. The differences in the rates of carbon isotope exchange reactions of methane with [MC2]+ (M = Os and Ir) are explained by several factors like the energy barrier for the initial H3C-H bond breaking processes, the molecular dynamics, orbital interactions, and the H-binding energies of the pivotal steps. Besides, the number of participating valence orbitals might be one of the keys to regulate the rate in the key step. The present findings may provide useful ideas and inspiration for designing similar processes.

Protonation Isomer Specific Ion-Molecule Radical Reactions.

Through a combination of ion-mobility filtering and laser-equipped quadrupole ion-trap mass spectrometry, the gas-phase reaction kinetics of two protonation isomers of the distonic-radical quinazoline cation are independently measured with ethylene. For these radical addition reactions, protonation site variations drive significant changes in nearby radical reactivity, and this is primarily due to through-space electrostatic effects. Furthermore, quantum chemical methods specifically designed for calculating long-range interactions, such as double-hybrid density functional theory, are required to rationalize the experimentally measured difference in reactivity.

Methane Activation by [OsC3]+: Implications for Catalyst Design.

Gas-phase reactions of [OsC3]+ with methane at ambient temperature have been studied by using quadrupole-ion trap mass spectrometry combined with quantum chemical calculations. The comparison of [OsC3]+ with the product clusters revealed significant changes in cluster reactivity. In particular, with different ligands, the cluster may produce multiple products or, alternatively, just a single product. Theoretical calculations reveal the influence of electronic features such as molecular polarity index, charge and spin distribution, and HOMO-LUMO gap on the reactivity of the Os complexes. Fundamentally, it is the polarity of the clusters that leads to the cluster reactivity in the methane activation. Furthermore, reducing the local polarity of the catalyst active site may be one means of reducing the number of byproducts in the reaction.

Quantitative analysis and hepatoprotective mechanism of Cistanche deserticola Y. C. Ma against alcohol-induced liver injury in mice

Cistanche deserticola Y. C. Ma (CD), known as “desert ginseng”, has been found to have hepatoprotective effect. This research aimed to investigate the quality control and its alleviating effect on alcoholic liver injury in mice. In this study, for the first time, a sensitive and efficient ultra-high-performance liquid chromatography with quadrupole ion-trap mass spectrometry (UPLC-Q-TRAP/MS) method was developed to rapidly characterize nine representative phenylethanoid glycosides (PhGs) in the CD extract within 14 min, offering a reference for the quality control standard of this plant. In addition, we found that the CD extract significantly inhibited the weight loss, decreased the liver index, and attenuated excessive lipid deposition, inflammatory and oxidative stress in the mice liver. With the help of the high-throughput lipidomics technique, we discovered that CD markedly reversed 17 lipid metabolites and their involved linoleic acid, arachidonic acid and glycerophospholipid metabolic pathways. As these metabolites are mainly associated with lipid metabolism and liver damage, we further used molecular biological tests to found that CD could regulate the upstream genes and proteins of the lipid metabolism pathway, including adenosine 5′-monophosphate-activated protein kinase (AMPK), sterol regulatory element binding protein-1c (SREBP-1c), fatty acid synthase (FAS), and peroxidase proliferators activate receptors α (PPARα). In conclusion, this study elucidates the modulatory effects of CD on lipid metabolism disorders in alcoholic fatty liver from holistic system and provides a reference for further research and development of CD as a therapeutic agent.

Examining Interactions of Uranyl(VI) Ions with Amino Acids in the Gas Phase

Gas-phase experiments, using electrospray ionization quadrupole ion trap mass spectrometry (ESI-QIT/MS), were conducted to probe basic interactions of the uranyl(VI) ion, UO22+, with selected natural amino acids, namely, L-cysteine (Cys), L-histidine (His), and L-aspartic acid (Asp), which strongly bind to metal ions. The simplest amino acid, glycine (Gly), was also studied for comparison. Cys, His, and Asp have additional potentially coordinating groups beyond the amino and carboxylic acid functional groups, specifically thiol in Cys, imidazole in His, and a second carboxylate in Asp. Gas-phase experiments comprised collision-induced dissociation (CID) of uranyl–amino acid complexes and competitive CID to assess the relative binding strength of different amino acids in the same uranyl complex. Reactivity of selected uranyl–amino acid complexes with water provided further insights into relative stabilities. In positive ion mode, CID and ensuing reactions with water suggested that uranyl–neutral AA binding strength decreased in the order His > Asp > Cys > Gly, which is similar to amino acid proton affinities. In negative ion mode, CID revealed a decreasing dissociation tendency in the order Gly >> His ≈ Cys > Asp, presumably reflecting a reverse enhanced binding to uranyl of the doubly deprotonated amino acids formed in CID.

Enhancement of Portable Mass Spectrometer Sensitivity and Selectivity by a Qualitative Pre-Scan Waveform (QPSW)

While portability is a key aspect of small mass spectrometers, they also need to be able to effectively screen the analytes from complex matrices. The accuracy and performance of mass spectrometers depend not only on the identification of parent ion signals in targets but also fragment ion signals. This paper reports on the construction of a device that uses a new time-domain excitation waveform called qualitative pre-scan waveform (QPSW) for its quadrupole ion trap mass spectrometry analyzer. This approach uses scanning to eliminate interfering ions, thus improving the sensitivity for the analyte and removing the cumbersome steps required to convert conventional stored waveform inverse Fourier transform (SWIFT) waveforms from the frequency domain to the time domain. Tests show that the target ions can be fragmented just by introducing air at the moment when the pinch valve is opened without any need for a carrier gas. This simplifies the equipment required, making the mass spectrometer more portable. Tests were undertaken to compare the performance with the use of conventional SWIFT waveforms and to optimize its experimental parameters so that the target ions were effectively accumulated in the ion trap. An approximate 5-fold improvement in sensitivity was achieved by QPSW compared to the SWIFT for 2 μg/mL ketamine. A 5-fold reduction in the limit of detection (LOD) to 20 ng/mL was also obtained for enrofloxacin. In addition, the stability was improved by QPSW with a relative standard deviation less than 13% compared to 16% for SWIFT.

Investigation of solvent microparticle formation in spray ionization–quadrupole ion trap–mass spectrometry

AbstractIn the present study, a new method has been developed for the real‐time analysis of insource created solvent particles based on spray ionization–quadrupole ion trap–mass spectrometry (SI‐QIT‐MS). This is the first work in the literature reporting the formation of different solvent particles during solvent spray in mass spectrometry. The solvent particles formed from the solvent droplets are detected by a charge detector. Our ion trap system allows the measurement of a wide range particle masses. Various solvents and solvent mixtures such as water, methanol, acetone, toluene, n‐butanol, water‐methanol, and water‐ethanol were sprayed through a cone system, and the mass of the particles was monitored by different trap frequencies and voltages. While polar molecules produce larger and more diverse particles due to their strong intermolecular forces, apolar solvents generally do not produce a significant number of particles. We obtained results using a homemade ion trap mass spectrometer capable of determining the mass of micro‐sized solvent and solvent mixture particles weighing up to 1015 (Da). The instrument uses a charge detector connected to the exit of the ion trap. Simultaneous acquisition of particle mass spectra and measurement of the amount of charge in each particle allow mass assignment of each particle. Sprayed solvent particles were examined at various trap frequencies and voltages to find the best instrumental parameters for the highest trapping efficiency. The custom SI‐QIT‐MS instrument allows the measurement of the mass distribution of charged particles from the solvent spray.

Simultaneous quantitative analysis of nine saponins in Gynostemma pentaphyllum before and after heat processing based on UPLC-Q-Trap-MS

Heat-processed Gynostemma pentaphyllum has strong biological activity, and saponins are the main components. To investigate the changes of saponins in G. pentaphyllum before and after heat processing, the present study determined and analyzed the content of nine saponins in G. pentaphyllum from Zhangzhou of Fujian and Jinxiu of Guangxi by ultra-high performance liquid chromatography with quadrupole ion-trap mass spectrometry(UPLC-Q-Trap-MS). The separation of the analytes was performed on an ACQUITY UPLC BEH C_(18) column(2.1 mm×50 mm, 1.7 μm) at 30 ℃, with acetonitrile and 0.1% formic acid in water as the mobile phase by gradient elution, and the flow rate was 0.3 mL·min~(-1). Quantitative analysis was performed using electrospray ionization source(ESI) in the multiple reaction-monitoring(MRM) mode. The results showed that the content of saponins with biological activities increased after heat processing. Specifically, gypenoside L, gypenoside LI, damulin A, damulin B, ginsenoside Rg_3(S), and ginsenoside Rg_3(R) in G. pentaphyllum produced in Zhangzhou of Fujian increased by 7.369, 8.289, 12.155, 7.587, 0.929, and 1.068 μg·g~(-1), respectively, while the content of ginsenoside Rd, gypenoside LVI, and gypenoside XLVI, which were abundant in the raw materials, decreased by 0.779, 19.37, and 9.19 μg·g~(-1), respectively. The content of gypenoside L, gypenoside LI, damulin A, damulin B, ginsenoside Rg_3(S), and ginsenoside Rg_3(R) in G. pentaphyllum produced in Jinxiu of Guangxi increased by 0.100, 0.161, 0.317, 0.228, 3.280, and 3.395 μg·g~(-1), respectively, while the content of ginsenoside Rd, gypenoside LVI, and gypenoside XLVI in the raw materials was reduced by 1.661, 0.014, and 0.010 μg·g~(-1), respectively. The results suggest that heat processing is an effective way to transform rare gypenosides. Furthermore, it is found that there are great differences in the content of gypenosides in different regions.

Monitoring Silver(I)-Insulin Complexes with Electrospray Ionization Quadrupole Ion Trap Mass Spectrometry.

Ag(I)-insulin complex formation was investigated using electrospray quadrupole ion trap mass spectrometry (ESI-QIT-MS), and Ag(I) ion binding to an insulin molecule was evaluated. The Ag(I) binding ratios were measured in the range of pH 3-8. The highest binding ratio of the Ag(I) ions was obtained at pH 7. Spectrometric titration was carried out at varied molar ratios of Ag(I) ions to insulin from 20/1 to 250/1. It was observed that four Ag(I) ions were bound effectively to an insulin molecule to form Ag(I)1-4-insulin complexes. The formation equilibrium constants of Ag(I)1-4-insulin complexes were calculated from the ESI-QIT-MS peak intensities. The equilibrium constants were found as Kf1 = (2.92 ± 0.18) × 104 M-1, Kf2 = (1.03 ± 0.07) × 104 M-1, Kf3 = (6.67 ± 0.46) × 103 M-1, and Kf4 = (2.00 ± 0.16) × 103 M-1. The tandem MS/MS spectroscopies were studied to evaluate the stability of the Ag(I) complexes. The different flow rates with nano-ESI were performed to determine the binding of Ag(I) ions in solution or gas phase. In conclusion, it was observed that the Ag(I) ion forms stable Ag(I)1-4-complexes with high formation equilibrium constants.

Laser Desorption Ionization Time-of-Flight Mass Spectrometry of Silver-Doped (GeS2)50(Sb2S3)50 Chalcogenide Glasses.

Mass spectra of (GeS2)50(Sb2S3)50 glass and Ag-doped glasses [5% Ag (GeS2)50(Sb2S3)50 and 15% Ag (GeS2)50(Sb2S3)50] obtained using laser desorption ionization (LDI) time-of-flight coupled with quadrupole ion trap mass spectrometry were studied. The analysis of the mass spectra indicated the formation of AgaGebSbcSd clusters. In addition to the SbSd+ (d = 1 and 2), Sb2Sd+ (d = 1–3), Sb3Sd+ (d = 1–5), Sb4Sd+ (d = 3 and 4), Sb5S2+, and Sbc+ (c = 3 and 5) clusters, various clusters containing Ag, such as Aga+ (a = 1 and 2), AgGeS+, AgSbc+ (c = 1, 2, and 4), AgSbS+, AgSb2Sd+ (d = 1–5), AgSb3S3+, AgSb4S4+, Ag2Sb3Sd+ (d = 4 and 5), Ag4Sb2S3+, and Ag5SbS3+, were generated. Moreover, in spite of the five-ninth purity of all glass components, several hydrogenated clusters (SbS3H8+, Sb4S2H+, Ag2H11+, Ag2Sb3H4+, Ag3Sb2H4+, Ag4Sb2H2+, and Ag4S3H8+) and some low-intensity oxidized clusters, such as Sb3O+ and Sb3O5+, were also detected. When applying LDI on (GeS2)50(Sb2S3)50 glass, no Ge-containing clusters were detected in the positive ion mode, and just one Ge-containing cluster was observed after doping the glass with Ag. Hydrogen plays an important role in the glasses studied. The knowledge gained concerning cluster stoichiometry contributes to the elucidation of the structure of Ag-doped Ge–Sb–S chalcogenide glasses. It should be noted that some of the clusters were considered to be structural fragments. Furthermore, mass spectrometry was complemented with Raman spectroscopy.

Comparison of Clusters Produced from Sb2Se3 Homemade Polycrystalline Material, Thin Films, and Commercial Polycrystalline Bulk Using Laser Desorption Ionization with Time of Flight Quadrupole Ion Trap Mass Spectrometry.

This study compared Sb2Se3 material in the form of commercial polycrystalline bulk, sputtered thin film, and homemade polycrystalline material using laser desorption ionization (LDI) time of flight mass spectrometry with quadrupole ion trap mass spectrometry. It also analyzed the stoichiometry of the SbmSen clusters formed. The results showed that homemade Sb2Se3 bulk was more stable compared to thin film; its mass spectra showed the expected cluster formation. The use of materials for surface-assisted LDI (SALDI), i.e., graphene, graphene oxide, and C60, significantly increased the mass spectra intensity. In total, 19 SbmSen clusters were observed. Six novel, high-mass clusters-Sb4Se4+, Sb5Se3-6+, and Sb7Se4+-were observed for the first time when using paraffin as a protective agent.

Role of Ligand in the Selective Production of Hydrogen from Formic Acid Catalysed by the Mononuclear Cationic Zinc Complexes [(L)Zn(H)]+ (L=tpy, phen, and bpy).

A series of zinc-based catalysts was evaluated for their efficiency in decomposing formic acid into molecular hydrogen and carbon dioxide in the gas phase using quadrupole ion trap mass spectrometry experiments. The effectiveness of the catalysts in the series [(L)Zn(H)]+ , where L=2,2':6',2''-terpyridine (tpy), 1,10-phenanthroline (phen) or 2,2'-bipyrydine (bpy), was found to depend on the ligand used, which turned out to be fundamental in tuning the catalytic properties of the zinc complex. Specifically, [(tpy)Zn(H)]+ displayed the fastest reaction with formic acid proceeding by dehydrogenation to produce the zinc formate complex [(tpy)Zn(O2 CH)]+ and H2 . The catalysts [(L)Zn(H)]+ are reformed by decarboxylating the zinc formate complexes [(L)Zn(O2 CH)]+ by collision-induced dissociation, which is the only reaction channel for each of the ligands used. The decarboxylation reaction was found to be reversible, since the zinc hydride complexes [(L)Zn(H)]+ react with carbon dioxide yielding the zinc formate complex. This reaction was again substantially faster for L=tpy than L=phen or bpy. The energetics and mechanisms of these processes were modelled using several levels of density functional theory (DFT) calculations. Experimental results are fully supported by the computational predictions.

Formation, Identification, and Occurrence of New Bromo- and Mixed Halo-Tyrosyl Dipeptides in Chloraminated Water.

Dipeptides are widely present in surface water and serve as precursors to form disinfection byproducts (DBPs) during disinfection (e.g., chloramination). Bromide (Br-) and iodide (I-) are common in many source waters, enhancing Br- and I-DBP formation. Recently Cl-, I-, and Cl-I-dipeptides were identified after chloramination of tyrosyl dipeptides in the presence of I- and were detected in authentic disinfected drinking water samples. However, the formation and occurrence of Br- and mixed halogen (Cl, Br, and/or I)-dipeptides in disinfected water have not been studied. Here we investigated the formation of halogenated dipeptides from three aromatic dipeptides, phenylalanylglycine (Phe-Gly), tyrosylalanine (Tyr-Ala), and tyrosylglycine (Tyr-Gly), under chloramination in the presence of Br- and I- at environmentally relevant levels ([Br-] and [I-], 0 and 0 μg L-1, 6 and 30 μg L-1, 30 and 30 μg L-1, 150 and 30 μg L-1, 300 and 30 μg L-1, and 900 and 30 μg L-1, respectively). For the first time, N-Br- and N,N-di-Br- as well as N-Br- N-Cl- and N-Br-3-I-tyrosyl dipeptides were identified using infusion electrospray quadrupole time-of-flight mass spectrometry. Tyrosyl dipeptides produced N-Cl-, 3-I-/3,5-di-I-, and N-Cl-3-I-tyrosyl dipeptides, while Phe-Gly formed only N-Cl-/ N, N-di-Cl-Phe-Gly. To determine halogenated dipeptides in authentic water samples, we developed a new method of solid phase extraction and high-performance liquid chromatography with quadrupole ion trap mass spectrometry using reaction monitoring. 3,5-Di-I-Tyr-Ala and N-Br-Tyr-Ala were detected in treated water but not in the corresponding raw water, warranting further investigation into the occurrence of halogenated peptides in other drinking water systems.

Photodissociation spectroscopy of protonated guanosine monophosphate based on IR-laser ablation of droplet beam and quadrupole ion trap mass spectrometry

Photodissociation (PD) spectroscopy of protonated guanosine monophosphate (GMPH+) ions was performed using IR-laser ablation of droplet beam and quadruple ion trap techniques. Photofragmentation of GMPH+ gave a protonated guanine ion (GH+) as the main product. A wide-range PD spectrum (3.9–5.4 eV) monitored by the GH+ ion intensity showed four characteristic electronic transitions related to their three different anti glycosyl-bond conformers of GMPH+, which were identified by their π-π* transitions based on time dependent density functional theory calculation. Furthermore, the narrow-bandwidth PD spectrum (4.28–4.33 eV) shows the existence of syn glycosyl-bond conformation with keto form.

Comprehensive Secondary Metabolite Profiling Toward Delineating the Solid and Submerged-State Fermentation of Aspergillus oryzae KCCM 12698.

Aspergillus oryzae has been commonly used to make koji, meju, and soy sauce in traditional food fermentation industries. However, the metabolic behaviors of A. oryzae during fermentation in various culture environments are largely uncharacterized. Thus, we performed time resolved (0, 4, 8, 12, 16 day) secondary metabolite profiling for A. oryzae KCCM 12698 cultivated on malt extract agar and broth (MEA and MEB) under solid-state fermentation (SSF) and submerged fermentation (SmF) conditions using the ultrahigh performance liquid chromatography-linear trap quadrupole-ion trap-mass spectrometry (UHPLC-LTQ-IT-MS/MS) followed by multivariate analyses. We observed the relatively higher proportions of coumarins and oxylipins in SSF, whereas the terpenoids were abundant in SmF. Moreover, we investigated the antimicrobial efficacy of metabolites that were extracted from SSF and SmF. The SSF extracts showed higher antimicrobial activities as compared to SmF, with higher production rates of bioactive secondary metabolites viz., ketone-citreoisocoumarin, pentahydroxy-anthraquinone, hexylitaconic acid, oxylipins, and saturated fatty acids. The current study provides the underpinnings of a metabolomic framework regarding the growth and bioactive compound production for A. oryzae under the primarily employed industrial cultivation states. Furthermore, the study holds the potentials for rapid screening and MS-characterization of metabolites helpful in determining the consumer safety implications of fermented foods involving Koji mold.

Determination of spirotetramat and its four metabolites in citrus by ultra-high performance liquid chromatography-triple quadrupole-ion trap mass spectrometry

A method for the simultaneous determination of spirotetramat and its four metabolites in citrus was developed by ultra-high performance liquid chromatography-triple quadrupole-ion trap mass spectrometry (UPLC-Q TRAP MS).The samples were extracted with acetonitrile and purified by QuEChERS pretreatment.The extracts were detected using an electrospray ionization (ESI) positive ion source under multiple reaction monitoring (MRM) mode, and quantified by matrix matching external standard method.The results showed that spirotetramat and its four metabolites had good linearities in the range of 2-1000 μg/L with correlation coefficients (R2) greater than 0.99.The limits of detection (LODs) of spirotetramat and its four metabolites were in the range of 0.08 to 0.49 μg/kg, while the limits of quantification (LOQ) were in the range of 0.26 to 1.62 μg/kg.The average spiked recoveries were in the range of 94.0% to 98.70%, and the relative standard deviations were 1.1%-5.3%.The results from field trials showed that the contents of the final residues of spirotetramat and its four metabolites in the flesh, peel and whole fruit samples were 5.93-14.20, 11.30-17.86 and 1.30-16.51 μg/kg with the highest recommended dose of 60 mg/kg (active ingredient).The residues in harvested citrus were lower than the national standard maximum residue limit (1.00 mg/kg).The method is simple, rapid and accurate, with a high sensitivity and good separation effect, and the effect of matrix interference can be effectively reduced.The accuracy and precision of this method can meet the requirements of quantitative analysis.The method is suitable for the qualitative and quantitative detection of spirotetramat and its four metabolites in citrus.

Simultaneous determination of six estrogens in dairy products by high performance liquid chromatography-triple quadrupole-ion trap mass spectrometry coupled with matrix solid-phase dispersion and solid phase extraction

Matrix solid-phase dispersion (MSPD) and solid-phase extraction (SPE) were respectively developed for the pretreatment six estrogens in milk powder and liquid milk. It was implied that MSPD was suitable for the treatment of milk powder, while SPE was suitable for liquid milk treatment. Based on the optimized pretreatment procedures, the method for the simultaneous determination of the six estrogens in different dairy products was established by high performance liquid chromatography-triple quadrupole-ion trap mass spectrometry (HPLC-Q-TRAP-MS). The proposed method provided low limits of detection (LODs, 0.01-0.05 mg/L) and limits of quantification (LOQs, 0.05-0.10 mg/L), wide linearity range of 0.1-200 mg/L (except for estriol of 0.1-20 mg/L) with excellent correlation coefficients (R2)> 0.99. The average recoveries of the six estrogens in milk powder pretreated by MSPD ranged from 71.8% to 106.0% with RSD of 1.6%-9.2% (n=3), while the corresponding average recoveries in liquid milk pretreated by SPE ranged from 70.3% to 108.4% with RSD of 2.0% and 11.0% (n=3) with spiking levels of 1.0, 5.0, and 10 mg/kg, respectively. This sensitive and reliable method meets the demand for the analysis of trace estrogen residues in complex matrices.

Extensive study on physicochemical properties of polychlorinated biphenyls in a commercial ion trap mass spectrometer, relevance in analytical and environmental chemistry.

Polychlorinated biphenyls (PCBs) exist as 209 congeners, consisting of biphenyl molecules, where the number and substitution positions of halogen atoms are known to affect industrial uses, environmental transport mechanisms, distribution, fate, and toxicity. The complexity of the problem requires accurate physicochemical studies of an increasing number of congeners in order to understand the environmental and biological processes at play. This work presents a systematic study on the thermodynamic and kinetic properties of PCBs by quadrupole ion trap mass spectrometry. A clear relationship between structure and behavior of PCBs in mass spectrometry experiments has been observed. Overall data demonstrate that di-ortho congeners show lower thermodynamic stability and higher fragmentation rate than non/mono-ortho. Congeners follow different fragmentation mechanisms according to the number of chlorine atoms in ortho position of the biphenyl system. Experimental kinetic curves of mono/non-ortho and di-ortho congeners show a strong similarity with classical first-order kinetics curves; in particular, di-ortho congeners follow a first-order consecutive reaction, while mono/non-ortho follow a first-order parallel reaction. For each studied congener, the kinetic constant of reaction (fragmentation) has been determined. Data support environmental levels and biochemical transformations described in literature. The general picture of the PCB behavior inside a quadrupole ion trap provides the basis for the development of reliable and cost-effective analytical methods to the determination of ultra-low level trace of PCB congeners.

Solid Sampling with a Diode Laser for Portable Ambient Mass Spectrometry.

A hand-held diode laser is implemented for solid sampling in portable ambient mass spectrometry (MS). Specifically, a pseudocontinuous wave battery-powered surgical laser diode is employed for portable laser diode thermal desorption (LDTD) at 940 nm and compared with nanosecond pulsed laser ablation at 2940 nm. Postionization is achieved in both cases using atmospheric pressure photoionization (APPI). The laser ablation atmospheric pressure photoionization (LAAPPI) and LDTD-APPI mass spectra of sage leaves (Salvia officinalis) using a field-deployable quadrupole ion trap MS display many similar ion peaks, as do the mass spectra of membrane grown biofilms of Pseudomonas aeruginosa. These results indicate that LDTD-APPI method should be useful for in-field sampling of plant and microbial communities, for example, by portable ambient MS. The feasibility of many portable MS applications is facilitated by the availability of relatively low cost, portable, battery-powered diode lasers. LDTD could also be coupled with plasma- or electrospray-based ionization for the analysis of a variety of solid samples.