Quadrature Phase Shift Keying Research Articles

Implementing intelligent‐based sparse channel estimation in Multi User‐Multiple Input Multiple Output‐Orthogonal Frequency Division Multiplexing system with hybridized optimization algorithm

SummaryThe channel plays a significant role as the multipath in Multiple Input Multiple Output‐Orthogonal Frequency Division Multiplexing (MIMO‐OFDM) systems. The precoding‐based channel estimation algorithms estimate the channel capacity at the receiver node and they provide efficient channel estimates under worst case channel scenarios. To estimate the channel capacity in the mobile node, semi‐blind scenario is a crucial task in Multi User (MU) MIMO systems. Therefore, a semi blind sparse channel estimation algorithm is demonstrated in the MU‐MIMO system to provide better performance. In the transmitter side, the signal modulation is performed with the help of Quadrature Phase Shift Keying (QPSK), and the modulated signal is given to Pulse Shaping Algorithm (PSA) to reduce the inter‐carrier interference as well as inter symbol interference. At each transmitter, the Inverse Fast Fourier Transforms (IFFT) technique is used for mapping the symbols and then the mapped signal is send to the receiver. In the receiver side, the FFT, pulse reshaping, and QPSK demodulation blocks are serially connected and perform inverse operations of the transmitter in the receiver. Then, the sparse channel is estimated at the receiver by using the semi blind sparse algorithm, where the parameters are optimized by using the Hybridized Drosophila with Virus Colony Search Optimization (HD‐VCSO). The objective function of the developed sparse channel estimation is the reduction of Minimum Mean Square Error (MMSE) in the channel. The performance of the developed sparse channel estimation algorithm is analyzed through different conventional algorithms to validate the effectiveness of the proposed algorithm.

Investigation of IEEE 802.16e LDPC Code Application in PM-DQPSK System

With the development of the Internet and information technology, optical fiber communication systems need to meet people’s information demand for large capacity and high speed. High-order phase modulation and channel multiplexing can improve the capacity and data rate of optical fiber communication systems, but they also bring the problem of bit error. To improve the transmission quality and reliability of optical fiber communication systems, forward error correction (FEC) coding techniques are commonly used, which serve as the fundamental approach to enhance the quality and reliability of fiber optic communication systems, ensuring that the received data remain accurate and reliable. The FEC in optical fiber communication systems is divided into three generations. The first generation FEC is mainly hard decision codewords, represented as RS code. The second generation FEC is mainly cascaded code, which stands for interleaved cascaded code. The third generation of FEC mainly refers to soft decision codes, which are represented as low-density parity-check (LDPC) codes. As a kind of FEC, LDPC codes stand out as pivotal contributors in the field of optical communication and have gained remarkable attention due to exceptional error correction performance and low decoding complexity. Based on IEEE802.16e standard, LDPC code with specific code length and rate is compiled and simulated in MATLAB and VPItransmissionMaker 10.1 and successfully incorporated into polarization multiplexed differential quadrature phase shift keying (PM-DQPSK) coherent optical transmission system. The simulation results indicate that the bit error rate (BER) can be reduced to 10−3 when the optical signal-to-noise ratio (OSNR) reaches 14.2 dB, and the BER experiences a reduction by nearly three orders of magnitude when the OSNR is 17.2 dB. These findings underscore the efficacy of LDPC codes in significantly improving the performance of optical communication systems, particularly in scenarios demanding robust error correction capabilities. This study provides valuable, significant results regarding the potential of LDPC codes for enhancing the reliability of optical transmission in real-world applications.

Rate 5/6 TCM Code Having 64 States with 64 QAM for Fading Channel

Trellis Coded Modulation (TCM) is powerful technique employed in digital communication systems to improve the reliability and efficiency of data transmission. TCM combines error control coding and modulation schemes to achieve superior performance in challenging channel conditions. In TCM, information bits are encoded using a trellis encoder, which generates a sequence of encoded symbols. These symbols are then mapped onto a modulation scheme, such as Quadrature Amplitude Modulation (QAM) or Phase Shift Keying (PSK), to create the modulated signal. At the receiver, the received signal is demodulated and decoded using a trellis decoder, which employs maximum likelihood decoding to recover the original information bits. The trellis structure allows for efficient error correction and makes TCM particularly suitable for channels with fading, noise, and other impairments. TCM has been widely used in various communication standards and applications to enhance data transmission reliability and spectral efficiency. TCM is a coding technique that merges coding and modulation to attain substantial coding gain without compromising bandwidth efficiency. The emergence of TCM occurred in the late 1970s, and ever since, it has found extensive utilization in various contemporary information transmission systems. In this paper, a new methodology is introduced for the design of a 64-state rate 5/6 TCM code optimized for fading channels. The outcomes obtained from the study are remarkably encouraging, demonstrating coding gain of around 10 dB in comparison to uncoded 32 PSK. This substantial gain plays a pivotal role in boosting data rates, especially in situations where bandwidth-limited channels are involved.

Time-frequency dual-dimension deep neural network (TF-DD-DNN)-based OSNR and XT monitoring in mode-division multiplexing systems

We propose a time-frequency dual-dimension deep neural network (TF-DD-DNN)-based optical performance monitoring (OPM) scheme to jointly monitor the optical signal-to-noise ratio (OSNR) and the mode-coupling induced crosstalk strength (XT) in mode-division multiplexing (MDM) systems, by revealing the diversity of the amplified spontaneous emission (ASE) and XT distortions on optical signals in the time- and frequency-domains. We numerically quantify the predictions of OSNR and XT for a coherent MDM transmission link, achieving the OSNR prediction accuracy of more than 0.99 and the XT prediction accuracy of up to 1 with the root mean square error (RMSE) of 0.11 dB at OSNR = 30 dB @0.1 nm for the case of quadrature-phase-shift keying (QPSK) signals. We evaluate the impacts of the chromatic dispersion (CD) of fibers and the low-pass filter bandwidth on the prediction procedures. The dependency of the modulation formats is also discussed, confirming the robust operation of the proposed scheme. Finally, the TF-DD-DNN scheme is experimental verified. High consistency is obtained between the simulation and experimental results.

Design and Test of Offset Quadrature Phase-Shift Keying Modulator with GF180MCU Open Source Process Design Kit

This article explores the evolution of integrated circuits (ICs), highlighting the fundamental role of open source Electronic Design Automation (EDA) tools in their development. It describes the IC’s design flow, differentiating between Front-end and Back-end design stages, and details the process of implementing the digital stage in offset quadrature phase-shift keying (OQPSK) modulation in an IC, including its hardware description language (HDL), the implementation test in the field-programmable gate array (FPGA), and the physical layout using the first manufactured open source process design kits (PDKs) in Global Foundries’ 180 nm, as well as the use of OpenLane and Caravel. To conclude, the results of the physical tests obtained from the digital modulation are presented, as well as the performance of the raised cosine shaping filter.

A Temporal Methodology for Assessing the Performance of Concatenated Codes in OFDM Systems for 4K-UHD Video Transmission

The communication channel is a critical part of the process of information degradation. In the 4K ultra-resolution video transmission domain, the communication channel is a crucial part where information degradation occurs, inevitably leading to errors during reception. To enhance the transmission process in terms of fidelity, advanced technologies such as digital video broadcasting terrestrial (DVB-T) and its evolutionary successor, digital video broadcasting terrestrial second generation (DVB-T2), are utilized to mitigate the effects of data transmission errors. Within this scenario, this research presents an innovative methodology for the temporal analysis of 4K ultra-resolution video quality under the influence of additive white Gaussian noise (AWGN) and Rayleigh channels. This analytical endeavor is facilitated through the application of concatenated coding schemes, specifically, the Bose–Chaudhuri–Hocquenghem concatenated low-density parity check (BCH-LDPC) and Reed–Solomon concatenated convolutional (RS-CONV) coders. A more comprehensive understanding of video quality can be attained by considering its temporal variations, a crucial aspect of the ongoing evolution of technological paradigms. In this study, the Structural Similarity Index (SSIM) serves as the main metric for quality assessment during simulations. Furthermore, the simulated Peak Signal-to-Noise Ratio (PSNR) values validate these findings, exhibiting consistent alignment with the SSIM-based evaluations. Additionally, the performance of the BCH-LDPC significantly outperforms that of RS-CONV under the 64-QAM modulation scheme, yielding superior video quality levels that approximate or surpass those achieved by RS-CONV under QPSK (Quadrature Phase Shift Keying) modulation, leading to an increase in spectral efficiency. This enhancement is evidenced by SSIM gains exceeding 78% on average. The computation of average gains between distinct technologies in video quality analysis furnishes a robust and comprehensive evaluation framework, empowering stakeholders to make informed decisions within this domain.

Simulation and analysis of 5G waveforms to reduce BER for vehicular communications

In today's rapidly evolving world, wireless communication has become a pervasive force, profoundly impacting various facets of our daily lives. Wireless Vehicular Networks stand out as a captivating realm of research, with a key focus on fostering information exchange among autonomous vehicles. As researchers witness surging demand in this domain, there is a growing emphasis on devising advanced techniques to augment network performance, particularly within the context of Fifth-generation (5G) applications, such as vehicular communication. The concept of Vehicle-to-vehicle (V2V) communications is poised to play a pivotal role in the future, presenting formidable challenges for the air interface by accommodating asynchronous multiple access and high mobility. Within this dynamic landscape, security and privacy issues loom large for 5G-enabled vehicle networks, many of which remain largely unexplored. The conventional waveforms, including Orthogonal Frequency Division Multiplexing (OFDM), may fall short of meeting these evolving standards. In this paper, authors delve into a comparative exploration of two waveform families, namely Filter Bank Multicarrier (FBMC) and Universal Filtered Multi-Carrier (UFMC), concerning their design and performance trade-offs. authors also examine their compatibility with various digital modulation schemes like 4-Quadrature Amplitude Modulation (QAM), 16-QAM, Offset Quadrature Phase Shift Keying (OQPSK), and Shaped offset OQPSK (SOQPSK). Through MATLAB simulations, our research vividly demonstrates the superior performance of UFMC when juxtaposed with OFDM and FBMC, especially concerning Bit Error Rate (BER) in both Rayleigh and Nakagami fading channels. In particular, authors consider a Nakagami shape parameter of 10, which yields a remarkable minimum BER for UFMC.

Fiber-optic parametric amplifier-based all-optical format conversion enabling optical networks interconnection with different modulation formats

A fiber-optic parametric amplifier (FOPA)-based all-optical format conversion (AOFC) scheme is proposed and numerically simulated to achieve optical networks interconnection with different modulation formats. In this scheme, the power transfer function (PTF) and the relative phase shift (RPS) functions between the input and output optical signals for the single-pump FOPA are derived and numerically analyzed. For the input 20 Gbps bipolar 4-ary pulse amplitude modulation (PAM4) signal, it can be converted into a BPSK signal (BPSK1) based on the power saturation characteristic of the PTF. By adjusting the input power of the input PAM4 signal, it can also be converted into a level-swapping PAM4 signal based on the single-pump FOPA. When the level-swapping PAM4 signal is sent into the single-pump FOPA with suitable power again, another BPSK signal (BPSK2) could also be generated. When the PAM4-to-BPSK format converter based on the single-pump FOPA is combined with the dual-pump FOPA (namely phase-sensitive amplifier, PSA), the 16-ary quadrature amplitude modulation (16QAM) signal can also be de-aggregated into four BPSK signals or two quadrature phase shift keying (QPSK) signals. The constellation diagrams, the power waveforms, the error vector magnitude (EVM) and the bit error rate (BER) of the relevant optical signals are measured to evaluate the scheme performance. The scheme can be deployed at the optical gateway to realize optical networks interconnection using different modulation formats.

Energy Efficient Wireless Signal Detection: A Revisit through the Lens of Approximate Computing

In the pursuit of energy efficiency in next-generation communication systems, approximate computing is emerging as a promising technique. In the proposed work, efforts are made to address the challenge of bridging the gap between the level of approximation and the Quality-of-Service (QoS) of the system. The application of approximate multiplication to wireless signal detection is explored systematically, illustrated by employing Truncated Multiplication (TM) on Quadrature Phase Shift Keying (QPSK) Minimum Mean Square Error (MMSE) detection. The irregularities induced by approximation in the multiplication operation employed in wireless signal detection are captured by the Approximate Multiplication Noise (AMN) model, which aids in the analysis of signal fidelity and resiliency of the system. The energy efficiency gains through approximation are highlighted in the approximation analysis. Signal fidelity analysis provides the capability to predict system output for varying levels of approximation, which aids in improving the stability of the system. The higher approximation levels are advantageous in low Signal-to-Noise Ratio (SNR) regimes, whereas lower approximation levels prove beneficial in high SNR regimes.

Analysis of Filtered Multicarrier Modulation Techniques Using Different Windows for 5G and Beyond Wireless Systems

In contemporary wireless communication systems, multicarrier modulation schemes have become widely adopted over single-carrier techniques due to their improved capacity to address challenges posed by multipath fading channels, leading to enhanced spectral efficiency. Orthogonal frequency division multiplexing (OFDM), a prevalent multicarrier scheme in 4G, is favored for its ease of implementation, interference resilience, and high data rate provision. But it falls short of meeting the requirements for 5G and beyond due to limitations such as out-of-band (OOB) emissions and cyclic prefixes. This paper introduces the filter bank multicarrier (FBMC) and universal filtered multicarrier (UFMC) with quadrature amplitude modulation (QAM) and phase shift keying (PSK) waveforms through Additive White Gaussian Noise channel (AWGN), Rayleigh fading channel and Rician channel. The objective of this paper is to enhance the performance of UFMC with reduced complexity through the new filtering approach for achieving optimal outcomes. The proposed scheme, incorporating Tukey filtering technique, demonstrates superior performance in reducing peak-to-average power ratio (PAPR) and improving bit error ratio (BER) compared to the original UFMC signal without necessitating additional power increments. Specifically, the UFMC system with Tukey filtering achieves a notable net gain of 5 dB. Simulation results demonstrate that utilizing various filter types in FBMC and UFMC systems, combined with QAM modulation, significantly reduces OOB emissions compared to conventional systems. In aspect to BER, Tukey window showed almost 10−6 at 15 dB SNR in UFMC which is better than FBMC.

Optimized pilot structure for PS-PDM ultrahigh-order QAM coherent optical transmission

We proposed and experimentally demonstrated a general pilot structure for probabilistic shaped (PS)-polarization division multiplexing (PDM) M-ary quadrature amplitude modulation (MQAM) coherent optical transmission, where a portion of PS-MQAM symbols is exploited as the pilot symbols with the same information entropy as the transmitted signal. The pilot symbols are simultaneously used in the entire digital signal processing (DSP) modules for polarization de-multiplexing, frequency offset estimation, carrier phase recovery, nonlinear equalization, and linear equalization. Compared to the conventional quadrature phase shift keying (QPSK) pilot structure, the proposed MQAM pilot structure can yield the nonlinear properties of the overall signal so that nonlinear equalization can effectively improve the performance of the normalized generalized mutual information. The remarkable performance has been achieved at the shaping parameters of 3.25 and 4.35 for 1024QAM and 4096QAM signals based on the proposed pilot scheme, which corresponds to the raw spectral efficiency of 16.190 and 20.381 bit/s/Hz, respectively. The pilot ratio is optimized to 5% for higher achievable information rates (AIRs).

SC and OFDM hybrid coherent optical transmission scheme based on 1-bit bandpass delta-sigma modulation.

High-order quadrature amplitude modulation (QAM) can effectively improve the capacity and spectral efficiency of coherent optical transmission systems. However, as the modulation order increases, the signal becomes less tolerant to noise and nonlinear effects during transmission, and the implementation cost also increases. We propose a single carrier (SC) and orthogonal frequency division multiplexing (OFDM) hybrid coherent optical transmission scheme based on a 1-bit bandpass (BP) delta-sigma modulation (DSM). The driving I-channel and Q-channel signals for the optical in-phase/quadrature (I/Q) modulator carry SC-modulated and OFDM-modulated transmitter data, respectively. Optical quadrature-phase-shift-keying (QPSK) modulation is realized by the 1-bit DSM quantizer and I/Q modulator, which can effectively suppress quantization noise and reduce the complexity of digital signal processing (DSP) and the performance requirements of optoelectronic devices. In addition, the hybrid transmission of SC and OFDM can balance the advantages of both to meet the variable channel conditions and complex application scenarios. High-fidelity transmission of SC 512QAM and OFDM 512QAM hybrid signals, in the form of a 60 Gbaud optical QPSK signal, over 60 km single-mode fiber-28 (SMF-28) is verified by offline experiments, and the bit error rates (BERs) of both SC 512QAM and OFDM 512QAM are below the hard-decision forward-error correction (HD-FEC) threshold of 3.8e-3.

FrFT-based estimation of linear and nonlinear impairments using Vision Transformer

To comprehensively assess the conditions of an optical fiber communication system, it is essential to implement joint estimation of the following four critical impairments: nonlinear signal-to-noise ratio (SNRNL), optical signal-to-noise ratio (OSNR), chromatic dispersion (CD), and differential group delay (DGD). However, current studies only achieve identifying a limited number of impairments within a narrow range, due to a lack of high-performance computing algorithms and a unified representation of impairments. To address these challenges, we adopt time-frequency signal processing based on the fractional Fourier transform (FrFT) to achieve the unified representation of impairments, while employing a Transformer-based neural network (NN) to break through network performance limitations. To verify the effectiveness of the proposed estimation method, numerical simulations were conducted on a five-channel polarization-division-multiplexed quadrature phase shift keying (PDM-QPSK) long haul optical transmission system with the symbol rate of 50 GBaud per channel. The mean absolute error (MAE) for SNRNL, OSNR, CD, and DGD estimation is 0.091 dB, 0.058 dB, 117 ps/nm, and 0.38 ps, and the monitoring window ranges from 0−20dB, 10−30dB, 1700−51,000ps/nm, and 0−100ps, respectively. Our proposed method achieves accurate estimation of linear and nonlinear impairments over a broad range, representing a significant advancement in the field of optical performance monitoring (OPM).

All-Optical format conversion from PAM4 to QPSK based on non-degenerate Phase-Sensitive amplification and pump assisted nonlinear optical loop mirror

An all-optical format conversion (AOFC) scheme from 4-ary pulse amplitude modulation (PAM4) to quadrature phase shift keying (QPSK) based on the non-degenerate phase-sensitive amplification (PSA) and the pump assisted nonlinear optical loop mirror (PA-NOLM) is proposed and numerically simulated for the first time. The input unipolar PAM4 signal with equal amplitude distance (UPAM4-A) is coupled with two input pump lights and injected into the symmetric interferometric fiber optic parameter amplifier (FOPA) to achieve the separation of the UPAM4-A and the new pump light generated at the signal frequency based on the non-degenerate PSA. When the filtered out UPAM4-A is coherent added with the new generated pump, the UPAM4-A signal to the biplolar PAM4 (BPAM4) signal. When the converted BPAM4 is sent into the PA-NOLM after adjusting its power, the BPAM4 signal could be converted into the QPSK signal. The error vector magnitude (EVM) and bit error ratio (BER) performance of the system are measured before and after AOFC with different input and receiver optical signal to noise ratio (OSNR). For the input UPAM4-A signal with an input OSNR of 27 dB, there is about 8.2 dB BER performance improvement in receiver OSNR for the final converted QPSK signal. Additionally, the proposed non-degenerate PSA configuration can be extended to realize the AOFC from one QPSK to two on–off keying (OOK) signals. The scheme can be applied in the optical gateway connecting the long-haul and the short-reach optical networks with suitable modulation formats.

Dual vector millimeter-wave signal generation based on optical carrier suppression modulation and direct detection with one photodetector.

We propose a novel, to the best of our knowledge, scheme for dual vector millimeter-wave (mm-wave) signal generation and transmission, based on optical carrier suppression (OCS) modulation, precoding, and direct detection by a single-ended photodiode (PD). At the transmitter side, two independent vector radio frequency (RF) signals with precoding, generated via digital signal processing (DSP), are used to drive an in-phase/quadrature (I/Q) modulator operating at the optical OCS modulation mode to simultaneously generate two independent frequency-doubling optical vector mm-wave signals, which can reduce the bandwidth requirement of transmitter's components and enhance spectral efficiency. With the aid of the single-ended PD and subsequent DSP at the receiver side, two independent frequency-doubling vector mm-wave signals can be separated and demodulated without data error. Based on our proposed scheme, we experimentally demonstrate the generation, transmission, and detection of 2-Gbaud 30-GHz quadrature-phase-shift-keying (QPSK) and 2-Gbaud 46-GHz QPSK signals over 10-km single-mode fiber-28 (SMF-28) and 1-m wireless transmission. The results indicate that the bit-error ratio (BER) of the dual vector mm-wave signals can each reach the hard-decision forward-error-correction (HD-FEC) threshold of 3.8 × 10-3.

Turbulence mitigation of four mode-division-multiplexed QPSK channels in a pilot-assisted self-coherent free-space optical link using a photodetector array and DSP-based channel demultiplexing.

In this Letter, we demonstrate turbulence mitigation of four mode-division-multiplexing (MDM) quadrature-phase-shift-keying (QPSK) channels in a pilot-assisted self-coherent free-space optical (FSO) link using a photodetector (PD) array and digital signal processing (DSP)-based channel demultiplexing. A Gaussian pilot beam is co-transmitted with four 1-Gbaud QPSK channels carried by four orbital angular momentum (OAM) modes. The pilot beam experiences similar turbulence-induced wavefront distortion to the data beams. At the receiver, the turbulence distortion is mitigated by its conjugate during the pilot-data mixing in a PD array. Subsequently, we demultiplex the four channels by applying in DSP a fixed matrix on the signals. Results show that our approach has <3-dB turbulence-induced power penalty at a 7% forward error correction (FEC) limit under a turbulence strength of 2w0/r0 = ∼4.4. The same turbulence can cause >18-dB penalties for a local oscillator (LO)-based coherent MDM system.

Suitability analysis of optical filters for enhancing performance parameters in a QPSK CO-OFDM modulation system

Abstract Optical filtering affects the fiber impairments in a fiber optic transmission system and its overall efficiency. The fiber impairments like attenuation, dispersion, and nonlinearities are challenges to overcome. The optical orthogonal frequency division multiplexing (O-OFDM) modulation is among the techniques to overcome these challenges. This paper uses O-OFDM with coherent transmission (denoted as CO-OFDM) and quadrature phase shift keying (QPSK) for modulating subcarriers. It is denoted as QPSK CO-OFDM modulation. This QPSK CO-OFDM (denoted here as QC) modulation system is further modified by introducing different optical filters in its fiber optic link. Different variants of QC are created by using optical filters in its fiber link. For example, the QC_BL is the variant having an optical Bessel filter in its fiber link. Performances of each variant have been evaluated and compared in terms of BER. This comparison allows us to select a suitable filter for a particular parameter, such as dispersion, fiber length, input power, etc. The QC variant having no filter is denoted as QC_WF and is taken as a reference for comparison.

A Dual-Mode CMOS Power Amplifier with an External Power Amplifier Driver Using 40 nm CMOS for Narrowband Internet-of-Things Applications

The narrowband Internet-of-Things (NB-IoT) has been developed to provide low-power, wide-area IoT applications. The efficiency of a power amplifier (PA) in a transmitter is crucial for a longer battery lifetime, satisfying the requirements for output power and linearity. In addition, the design of an internal complementary metal-oxide semiconductor (CMOS) PA is typically required when considering commercial applications to include the operation of an optional external PA. This paper presents a dual-mode CMOS PA with an external PA driver for NB-IoT applications. The proposed PA supports an external PA mode without degrading the performances of output power, linearity, and stability. In the operation of an external PA mode, the PA provides a sufficient gain to drive an external PA. A parallel-combined transistor method is adopted for a dual-mode operation and a third-order intermodulation distortion (IMD3) cancellation. The proposed CMOS PA with an external PA driver was implemented using 40 nm-CMOS technology. The PA achieves a gain of 20.4 dB, a saturated output power of 28.8 dBm, and a power-added efficiency (PAE) of 57.8% in high-power (HP) mode at 920 MHz. With an NB-IoT signal (200 kHz π/4-differential quadrature phase shift keying (DQPSK)), the proposed PA achieves 24.2 dBm output power (Pout) with a 31.0% PAE, while satisfying −45 dBc adjacent channel leakage ratio (ACLR). More than 80% of the current consumption at 12 dBm Pout could be saved compared to that in HP mode when the proposed PA operates in low-power (LP) mode. The implemented dual-mode CMOS PA provides high linear output power with high efficiency, while supporting an external PA mode. The proposed PA is a good candidate for NB-IoT applications.

Terahertz Replica Generation of Ultra-High Data Rate Transmission in an Electro-Optical Semiconductor Optical Amplifier Mach–Zehnder Interferometer System

This article presents an analysis of an electro-optical up-converter relying on a semiconductor optical amplifier Mach–Zehnder interferometer (SOA-MZI). The pulsed control signal is generated by an optical pulse clock (OPC) with a repetition rate of fs= 19.5 GHz. The intermediate frequency (IF) signal, which carries the modulation format known as quadratic phase shift keying (QPSK) at a frequency fIF, is shifted at the output of the SOA-MZI to high outlet mixing frequencies nfs±fIF, where n represents the harmonic order of the OPC. To examine the characteristics of the sampled QPSK signals, we employ the Virtual Photonics Inc. (VPI) emulator and evaluate them using significate metrics like error vector magnitudes (EVMs), conversion gains, and bit error rates (BERs). The up-mixing process is mainly achieved through the cross-phase modulation (XPM) effect in the SOA-MZI, which operates within a 195.5 GHz ultrahigh frequency (UHF). The electro-optical SOA-MZI up-converter demonstrates consistent uplifting conversion gains across the scope of the output mixing frequencies. The simulated conversion gain deteriorates from 38 dB at 20 GHz to 13 dB at 195.5 GHz. The operational efficiency of the electro-optical SOA-MZI design, employing the standard modulation approach, is also evaluated by measuring the EVM values. The EVM attains a 24% performance level at a data rate of 5 Gbit/s in conjunction with the UHF of 195.5 GHz. To corroborate our results, we compare them with real-world experiments conducted with the UHF of 59 GHz. The maximum frequency range of 1 THz is attained by increasing the OPC repetition rate. Ultimately, through elevating the control frequency to 100 GHz, the generation of terahertz replicas of the 4096-QAM (quadrature amplitude modulation) compound signal becomes achievable at heightened UHF, extending 1 THz, while maintaining a data transmission rate of 120 Gbit/s and upholding exceptional performance characteristics.

Energy Consumption Analysis for Continuous Phase Modulation in Smart-Grid Internet of Things of beyond 5G.

Wireless sensor network (WSN) underpinning the smart-grid Internet of Things (SG-IoT) has been a popular research topic in recent years due to its great potential for enabling a wide range of important applications. However, the energy consumption (EC) characteristic of sensor nodes is a key factor that affects the operational performance (e.g., lifetime of sensors) and the total cost of ownership of WSNs. In this paper, to find the modulation techniques suitable for WSNs, we investigate the EC characteristic of continuous phase modulation (CPM), which is an attractive modulation scheme candidate for WSNs because of its constant envelope property. We first develop an EC model for the sensor nodes of WSNs by considering the circuits and a typical communication protocol that relies on automatic repeat request (ARQ)-based retransmissions to ensure successful data delivery. Then, we use this model to analyze the EC characteristic of CPM under various configurations of modulation parameters. Furthermore, we compare the EC characteristic of CPM with that of other representative modulation schemes, such as offset quadrature phase-shift keying (OQPSK) and quadrature amplitude modulation (QAM), which are commonly used in communication protocols of WSNs. Our analysis and simulation results provide insights into the EC characteristics of multiple modulation schemes in the context of WSNs; thus, they are beneficial for designing energy-efficient SG-IoT in the beyond-5G (B5G) and the 6G era.