Quadrature Components Research Articles

Slidingan analysis of analytical signal of non-contact photoplethysmography for assessing heart rate

The paper proposes a method for studying the variability of the subject’s heart rate based on the intellectual analysis of the pulse wave measured with remote photoplethysmography. The logically related stages of the formation of quadrature components based on the Hilbert transform of biomedical signals’ dynamics are presented. Within the framework of modern methods of intellectual analysis of non-stationary time series, realizations of adaptive estimates of instantaneous frequencies and periods of the heartbeat basic tone are obtained.

Mechanical wave velocities by clutter filter wave imaging detects myocardial dysfunction in acute coronary syndrome

Abstract Background/introduction Mechanical waves within the myocardium arising from physiologic events in the cardiac cycle such as the atrial kick (AK), mitral valve closure (MVC) and aortic valve closure (AVC) offer insight to tissue stiffness and can be measured by high frame rate echocardiography. Purpose To investigate the feasibility of measuring mechanical wave velocities in the left ventricle by clutter filter wave imaging (CFWI) and its potential for detecting regional myocardial dysfunction in patients with acute coronary syndrome. Methods We examined 60 patients (66±9 years of age, 72% male) with acute coronary syndrome by high frame rate echocardiography after revascularisation, imaging the left ventricle from the parasternal long axis view and three apical projections. Intrinsic mechanical waves generated by the AK, MVC and AVC were analysed off-line by CFWI of all walls using custom software (PyMWI) on 2000 frames of in-phase and quadrature component data per view extracted from a Vivid E95 scanner. Results We analysed a total number of 2372 waves recorded with a frame rate of 1180 (1134-1199) frames per second. The feasibility for measuring AK waves was high in all regions (mean 89%), but lower for the MVC and AVC waves with significant variability between regions (mean 44% and 46%, respectively; p<0.001). Feasibility declined from basal to apical segments for all waves (p=0.0001). Mean mechanical wave velocity was slowest for the AK wave at 2.5 (2.0-3.0) m/s, faster for the AVC wave at 5.1 (3.5-6.3) m/s and fastest for the MVC wave at 6.6 (4.9-8.6) m/s (p=0.0001). Basal AK wave velocity was faster in patients with basal wall motion abnormalities compared to those without (2.7 vs. 2.0 m/s, p=0.0004) and could detect the presence of wall motion abnormalities adjusting for age, gender and parameters of diastolic function (univariable OR 3.4, 95% CI 1.5-7.7, p<0.01; multivariable OR 4.4, 95% CI 1.4-14.1, p=0.01). Basal AK wave velocity detected wall motion abnormalities with an AUC of 0.78 with cut-off speeds of 2.3 m/s and 3.0 m/s, both correctly classifying 73% of cases (sensitivity/specificity 81%/68% and 43%/89%, respectively). Mechanical wave velocities of other waves and in other regions were not consistently and only weakly associated with echocardiographic parameters of systolic and diastolic function. Conclusion(s) Mechanical wave velocities by CFWI detects myocardial dysfunction in acute coronary syndrome. Elevated basal AK wave velocity was independently associated with myocardial dysfunction where AK wave velocity ≥2.3 m/s provided a good sensitivity and ≥3.0 m/s a good specificity for detecting regional wall motion abnormalities. The feasibility of measuring the AK wave was good, whereas MVC and AVC waves had lower feasibility and were inadequate for assessment of myocardial function. Feasibility variations between AK and MVC/AVC waves suggest differences in wave propagation dynamics or intrinsic wave properties.Illustration Clutter Filter Wave ImagingRisk of myocardial dysfunction

MIMO Volterra polynomial equalizer for PDM ultrahigh-order QAM signals.

In this work, we proposed and experimentally demonstrated a multiple-input multiple-output (MIMO) Volterra polynomial equalizer (MVPE), in a probabilistic shaping (PS) polarization-division multiplexed (PDM) 4096-quadrature amplitude modulation (QAM) coherent optical transmission system. In comparison with the conventional single-input single-output (SISO) Volterra nonlinear equalizers (VNLEs), the proposed MVPE can equalize the in-phase (I) and quadrature (Q) components in both the X and Y polarizations simultaneously and effectively alleviate nonlinear distortions. In the PS-PDM-4096-QAM experiment, the normalized generalized mutual information (NGMI) reached the threshold of DVB-S2 low-density parity-check (LDPC) codes with a 20% overhead. Compared to the SISO VNLE scheme, the MVPE scheme improves receiver sensitivity by approximately 2.8 dB while maintaining nearly similar computational complexity.

Dynamic range extension method for sinusoidal phase modulating interferometer based on in-phase component signal reconstruction

Abstract The continuous increase of the amplitude of the measured vibration will cause spectrum aliasing in the interference signal of the sinusoidal phase modulating interferometer (SPMI), thereby constraining its measurement dynamic range (DR). To address this issue, a dynamic range extension method of SPMI based on the reconstruction of in-phase component signal is proposed. On the basis of conventional SPMI, an additional reference signal is introduced for estimating the phase modulation depth (PMD) and the major to minor axis ratio Re of the Lissajous ellipse formed by orthogonal interference signal pair and a phase demodulation algorithm named as PGC-ICR-DCM which integrates PGC-DCM algorithm and the in-phase component signal reconstruction (ICR) is proposed. Initially, the PMD is regulated to approximately 1.8412 rad, ensuring that the quadrature component signal can be accurately extracted from the mixed signal of the interference and carrier signals, even in the presence of spectrum aliasing in the original interference signal. Then, the undistorted quadrature component signal is used to reconstruct an in-phase component signal with the estimated value of Re. Finally, the reconstructed in-phase component signal and quadrature component signal are normalized, and a differential-and-cross-multiplying algorithm (DCM) is applied to obtain the measured vibration. A SPMI measurement system based on Michelson interferometer structure is constructed to experimentally validate the proposed method. The experimental results demonstrate that the proposed method can effectively extend the DR of the SPMI system in the presence of spectrum aliasing. The DR of the system is increased from 97.52 dB @ 55 Hz to 102.6 dB @ 55 Hz, with the maximum measurable amplitude increasing from 7728.75 nm @ 55Hz to 13705.16 nm @ 55 Hz.

Enhancement of single-photon level signal detection based on phase sensitive amplification strategy

Abstract We investigate the ability of phase-sensitive amplification (PSA) to noiselessly amplify the preferred quadrature components of single-photonsignals that are limited by phase fluctuations relative to the pump. We presenta PSA enhancement strategy that is more realistic for possible experimentalrealization and is expected to significantly improve the detection of weaksignals at the single-photon level and obtain more useful information. Our studyshows that with a large PSA gain, proper transmissivity allows both direct and
balanced homodyne detections to operate optimally simultaneously, and effectively improves the noise figure degradation owing to the internal losses and non-ideal detection efficiency.

Higher-order squeezing of both quadrature components in superposition of orthogonal even coherent state and vacuum state

Higher-order squeezing of both quadrature components in superposition of orthogonal even coherent state and vacuum state

NOMA‐based precoded quadrature spatial modulation in multiuser MIMO downlink transmission over correlated channel

SummaryIn this paper, a non‐orthogonal multiple access (NOMA)‐based precoded quadrature spatial modulation (PQSM) technique (NOMA‐PQSM) has been proposed for the downlink scenario. In NOMA‐PQSM, two intended receiving antennas are activated at any time instant. One antenna is activated for the in‐phase component of the transmitted signal, and another one is activated for the quadrature phase component, on the basis of data bits. NOMA‐PQSM provides benefits like improved spatial diversity and spectral efficiency in comparison with spatial modulation. This work uses zero forcing (ZF) precoding over downlink flat fading Rayleigh multiple input multiple output (MIMO) channels, to limit the channel's deteriorating effect on transmitted signal, assuming perfect channel state information (CSI) at the transmitter. A low complexity receiver based on the successive interference cancellation is used. An expression for the upper bound of average bit error probability is derived. Moreover, the expressions for the sum mutual information of users and its lower bound are also derived. The proposed scheme is compared with the preprocessing aided spatial modulation (PSM)‐based counterpart. Monte Carlo simulations reveal that the NOMA‐PQSM scheme outperforms its orthogonal counterpart and the PSM scheme.

Transceiver impairment robust and joint monitoring of PDL, DGD, and CD using frequency domain pilot tones for digital subcarrier multiplexing systems

Optical performance monitoring is vital for enabling dynamically reconfigurable optical networks. This paper introduces a monitoring scheme that is robust to transceiver impairments for coherent digital subcarrier multiplexing (DSCM) systems that simultaneously monitors polarization-dependent loss (PDL), differential group delay (DGD), and chromatic dispersion (CD). In the proposed scheme, a pair of frequency domain pilot tones (FPTs) are inserted into the X and Y polarizations of the transmitted dual-polarization signal. Both the signal and the FPTs endure identical channel impairments during fiber transmission. At the receiver side, the transmitted FPTs are extracted to monitor the channel impairments. We begin by establishing a simplified system model using a single frequency tone to analyze the effects of system impairments on the frequency domain pilots. Based on this model, CD, PDL, and DGD are jointly and accurately estimated. In addition, the influences of temporal, amplitude, and phase mismatches between in-phase (I) and quadrature (Q) components of transceivers on channel impairment monitoring are completely eliminated. This achieves a channel impairment monitoring scheme that is robust to transceiver impairments. Experimental verification shows that the proposed scheme can jointly and accurately estimate a wide range of CD, PDL, and DGD. Additionally, the proposed monitoring scheme demonstrates strong robustness against transceiver impairments, rapid polarization fluctuations, and amplified spontaneous emission (ASE) noise.

Comparative Study of Multilevel Converters using DQ Current Control

This paper presents a comprehensive comparative analysis of different multilevel converter topologies, including 2-level, Neutral Point-Clamped (NPC), Cascaded H-Bridge (CHB), and T-Type converters using the DQ current control strategy. The study aims to evaluate the performance of these topologies concerning current Total Harmonic Distortion (THD) and ripple in the direct and quadrature components of the current. A mathematical model of the grid is presented to facilitate the simulation study. The DQ current control scheme is implemented to regulate the current in both the direct and quadrature axes. The simulations are conducted under various operating conditions to capture the converters’ performance across different load scenarios and modulation techniques. Results indicate significant variations in the performance metrics among the different converter topologies. The 2-level converter exhibits higher THD and ripple compared to the more complex multilevel topologies.

CONTRÔLE DIRECT DU COUPLE AVEC MODULATION VECTORIELLE SPATIALE UTILISANT DES RÉGULATEURS À LOGIQUE FLUUSE DE TYPE 2 À INTERVALLE D'UNE MACHINE À INDUCTION À DOUBLE ÉTOILE ALIMENTÉE PAR DEUX ONDULEURS À POINT NEUTRE À TROIS NIVEAUX SERRÉS

This paper introduces a direct torque control (DTC) method with space vector modulation (SVM) using interval type-2 fuzzy logic regulators for a dual-star induction machine fed by two three-level neutral point clamped inverters. The conventional DTC drive utilizes a pair of hysteresis comparators, which can lead to issues such as high torque ripple and variable switching frequency. As a result, we introduce several alternative methods, including DTC-SVM. We replace the hysteresis comparators with two Proportional-Integral (PI) regulators to enhance DTC performance, which generates the direct and quadrature voltage components in the d-q frame. The intricacy of the control system can make adjusting the PI regulator parameters difficult. To address this challenge, we propose using an interval type-2 fuzzy logic regulator for PI parameter adjustment in this paper. Our simulation results demonstrate the robustness and efficiency of the IT2FLC regulator.

Характеристики обнаружения когерентной системы при рассогласовании квадратурных каналов

Introduction – The operation of an adaptive coherent detection system is considered. The structure of a processing device is presented, containing a series-connected shaper of quadrature signal components that convert high-frequency input radio signals to video frequency, an adaptive multi-channel coherent storage device with threshold devices. Goal – To study the influence of amplitude and phase mismatches of quadrature channel parameters, which are inevitable in practice, on the operation of an adaptive coherent detection system. Formulation of the problem – Determine the spectral-correlation characteristics of the processed signals when the parameters of the quadrature channels are mismatched. Assess the influence of amplitude and phase deviations of the parameters of quadrature channels on the characteristics of a coherent detection system. Method – The complex variable method is used, in which the input high-frequency signals are represented at the video frequency by a pair of complex conjugate real components, shifted in phase by ninety degrees. Results – A model of the processed signal is presented at the video frequency, taking into account possible mismatches in the parameters of quadrature channels in practice. Expressions are obtained and graphs of the spectral density of the complex signal are plotted separately for the amplitude and phase mismatch of the quadrature channels. It is shown that the mismatch of quadrature channels leads to the appearance in the spectrum of the output signal of phase detectors of a component at a frequency that is the mirror frequency of the signal, which leads to an increase in the probability of false detection. The results of calculations of the probability of false detection of a signal depending on the deviation of the transmission coefficients of the quadrature channels and the phase mismatch of the reference voltages of the quadrature channels are presented. Conclusion – The significant influence of amplitude and phase mismatches of the parameters of quadrature channels on the spectral-correlation characteristics of the complex signal is shown. The mismatch of the parameters of the quadrature channels leads to deterioration in the detection characteristics of the coherent processing system. The research methodology used allows us to develop requirements for the quality of tuning quadrature channels.

Understanding the Phase of Responsivity and Noise Sources in Frequency-Domain Multiplexed Readout of Transition Edge Sensor Bolometers

Cosmic microwave background (CMB) experiments have deployed focal planes with O(104)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mathcal {O}(10^{4})$$\\end{document} transition edge sensor (TES) bolometers cooled to sub-Kelvin temperatures by multiplexing the readout of many TES channels onto a single pair of wires. Digital Frequency-domain Multiplexing (DfMux) is a multiplexing technique used in many CMB polarization experiments, such as the Simons Array, SPT-3 G, and EBEX. The DfMux system studied here uses LC filters with resonant frequencies ranging from 1.5 to 4.5 MHz connected to an array of TESs. Each detector has an amplitude-modulated carrier tone at the resonant frequency of its accompanying LC resonator. The signal is recovered via quadrature demodulation where the in-phase (I) component of the demodulated current is in phase with the complex admittance of the circuit and the quadrature (Q) component is orthogonal to I. Observed excess current noise in the Q component is consistent with fluctuations in the resonant frequency. This noise has been shown to be non-orthogonal to the phase of the detector’s responsivity. We present a detailed analysis of the phase of responsivity of the TES and noise sources in our DfMux readout system. Further, we investigate how modifications to the TES operating resistance and bias frequency can affect the phase of noise relative to the phase of the detector responsivity, using data from Simons Array to evaluate our predictions. We find that both the phase of responsivity and phase of noise are functions of the two tuning parameters, which can be purposefully selected to maximize signal-to-noise (SNR) ratio.

Airborne GNSS reflectometry for coastal monitoring of sea state

Sea level rise and sea state variability, resulting from climate change and global warming, are critical research areas. However, current techniques for observing and monitoring these phenomena have limitations in terms of spatial and temporal resolution, particularly in dynamic coastal zones. GNSS Reflectometry (GNSS-R) is an emerging bistatic radar-based technique that utilizes the GNSS direct (transmitter-receiver) and reflected (transmitter-reflection point-receiver) signals to extract properties of the reflecting surface. This study explores the potential of airborne GNSS-R as a means to monitor sea state in coastal areas by using the Doppler spread and reflectivity as observables. The paper aims to derive a sea state factor from the reflected signal power and the Doppler shift distribution to analyze its correlation with wind speed and significant wave height data obtained from the ERA5 model. The experiment involved four flights conducted along the coast between Calais and Boulogne-sur-Mer, France, in July 2019. A GNSS software receiver processes the direct and reflected signals, tracking and re-tracking the reflected signals with the aid of a specular reflection model. The resulting in-phase and quadrature components are analyzed in the spectral domain every minute to estimate the power, the surface reflectivity, and the relative Doppler shift. The findings reveal that the sea state factor and Doppler spreading are sensitive to sea state conditions, correlated with the ERA5 parameters, and influenced by the elevation angle of GNSS satellites. At low elevations (E<10°), the sea state factor demonstrates an inverse relationship (anti-correlation) with the wind speed and significant wave height, while the Doppler distribution shows a correlation with these parameters. Both correlations decrease with increasing elevation angle. This research underscores the potential of airborne GNSS-R for monitoring sea state variability in coastal areas enhancing our understanding of the relationships between GNSS-R measurements and sea state parameters.

Theoretical and experimental study of modulation transfer spectroscopy for non-cycling transitions of Rb D1 lines

Modulation transfer spectroscopy (MTS) of the D1 transitions of 85Rb and 87Rb atoms with only non-cycling transitions have been investigated theoretically and experimentally using the density matrix equation for four different polarization configurations: linear orthogonal (lin⊥lin), linear parallel (lin ∥ lin), circular orthogonal (σ+−σ−), and circular parallel (σ+−σ+). MTS signals for the Fg=3→Fe=2 transition of 85Rb atom and Fg=2→Fe=1 transition of the 87Rb atom among D1 transition lines were found to be stronger than those for the other transitions. The two non-cycling transitions have strong MTS signals because of the branching ratios and populations of the relevant ground states. The observed line shapes of the in-phase and quadrature components of MTS signals agree well with the theoretical shapes obtained by solving the density matrix equation.

Nonlinear-tolerant two-dimensional distribution matcher scheme for probabilistic shaping.

This Letter proposes a nonlinear-tolerant two-dimensional distribution matcher (2D-DM) scheme. It removes the corner points of probabilistically shaped quadrature amplitude modulation (QAM) to obtain better nonlinear tolerance. Because the remaining number of points is not a power of 2, we propose to divide constellation points into different layers and symbols. Then, the proposed 2D-DM performs matching using one-dimensional shapers, which generates the in-phase and quadrature components of QAM together. In fact, it realizes two-dimensional shapers from one-dimensional shapers. Simulation results show that two-dimensional shapers generated by the proposed 2D-DM have higher tolerance to power amplifier nonlinearity and fiber nonlinearity compared to one-dimensional shapers.

A PGC demodulation scheme based on the Lissajous ellipse fitting for homodyne interferometer without using second harmonic carrier signal

This paper proposes a phase generated carrier (PGC) demodulation scheme for sinusoidal phase modulation interferometer (SPMI) that does not require a second harmonic carrier signal. In this scheme, an in-phase interference signal component with direct current (DC) bias is obtained by low-pass filtering the original interference signal, and a quadrature interference signal component is obtained by conventional means. The Lissajous figure formed by these two quadrature interference signal components is an ellipse whose center deviates from the origin of the I-Q coordinates. By fitting this ellipse, the major and minor axes and the center coordinates can be obtained. These elliptic parameters are then used to eliminate DC bias and normalize the amplitude of the quadrature signal components. Finally, the phase demodulation of the interference signal can be realized by using arctangent algorithm or differential cross multiplication (DCM) algorithm. The results of simulation and experiment have verified the validity and accuracy of the proposed PGC demodulation scheme, and show that it is insensitive to the phase modulation depth C. Compared with conventional PGC demodulation, this scheme requires lower depth of carrier phase modulation. The vibration measurement results indicate that the average signal-to-noise and distortion Ratio (SINAD) and total harmonic distortion (THD) values of demodulation results in the frequency range of 130 Hz to 250 Hz are 34 dB and -33 dB respectively. The proposed PGC demodulation scheme shows good performance in displacement measurement using SPMI.

Geophysical characterization of lamproite fields in the Dharwar craton using VLF-EM and advanced filtering techniques: insights from conductivity analysis and analytical signal mapping

Abstract This study presents a geophysical investigation of the lamproite fields located in the Dharwar craton, aiming to map conductivity variations using contemporary techniques. The study employs very low-frequency electromagnetic (VLF-EM) methods, applying Hilbert transformations, and first-order vertical derivatives to the Fraser and Karous–Hjelt filtered contoured of VLF-EM data. The peninsular gneissic complex (PGC) granitic rocks in the study area experienced tectonic forces, resulting in fractures along specific WNW–ESE to NW–SE trends. Within these crustal weak zones, these lamproites are emplaced. The lamproite pipes are volcanic rocks. As a result, the top portions are weathered and tend to conductive, and the conductivity tends to decrease with depth. The volumetric size of lamproites ranges from centimetres to hundreds of metres, unlike kimberlites that are larger. Hence, the exploration of lamproites poses challenges. The contours of in-phase and quadrature components were used to identify the cluster of lamproite zones within the study area. From this study, the boundaries of the lamproite pipes were clearly identified using real component's analytical and first-order vertical derivative signal contour maps. The VLF-EM pseudo-depth current density section was used to identify anomalous lamproite, pipes, and their subsurface extensions, along with the surrounding formations. The current investigation findings specify that the lamproites exhibit weak conductive. These results provide valuable insights for exploration efforts within the Dharwar craton, and can aid in the identification and mapping of the lamproite fields.

EEG stress classification based on Doppler spectral features for ensemble 1D-CNN with LCL activation function

The paper proposes an induced stress classification algorithm that uses features from the Doppler spectrum. In this approach, a reference signal source is used to obtain the quadrature and in-phase components of the EEG signal. The higher frequency components from the in-phase and quadrature are then eliminated using a pair of low-pass filters. The Doppler spectrum was then constructed from which the Doppler frequency features are then estimated. The features that were thus obtained are trained using an ensemble 1D-CNN (one-dimensional Convolutional neural network) which uses two sections of 1D-CNN. The first section 1D-CNN trains the features based on the EEG signal classes namely Stroop test, arithmetic task, and mirror tasks, while the second 1D-CNN section trains the features based on the EEG signal intense classes namely high, low, and medium stress. We also propose a linear-cosine-linear (LCL) activation function for the ensemble 1D-CNN which was derived from the cosine signal. The proposed stress classification scheme was evaluated using the SAM-40 datasets with induced stress classes namely arithmetic task, Stroop color-word test, and mirror image recognition task with stress levels namely high, low, and medium with the evaluation metrics such as precision, F1-score, accuracy, specificity, and recall. The proposed stress classification scheme attains an average accuracy, precision, and recall of 95.25%, 95.22%, and 92.9% when evaluated in 9 classes of EEGs.

Graphene nanomechanical vibrations measured with a phase-coherent software-defined radio

Software-defined radios (SDRs) are radio frequency transceivers designed to facilitate digital signal processing through the use of vast libraries of open-source software. Here, we assemble a simple data acquisition system whose architecture, based on SDR, allows us to develop a comprehensive suite of tools to study the vibrations of a few-layer graphene nanomechanical resonator. Namely, we measure the cross-spectrum of vibrations in the frequency domain, we measure their energy decay rate in the time domain, we perform vector measurements of their in-phase and quadrature components, and we control their phase using a time-dependent strain field –all with a single measurement platform. Our approach allows us to tailor our experiments at will and gives us control over every stage of data processing. Overall, our versatile system enables measuring a wide range of nanomechanical properties of graphene by customizing the signal acquisition and replacing some analog electrical circuits, such as filters, mixers, and demodulators, by blocks of code.

Vector-based feedback of continuous wave radiofrequency compression cavity for ultrafast electron diffraction.

The temporal resolution of ultrafast electron diffraction at weakly relativistic beam energies (100 keV) suffers from space-charge induced electron pulse broadening. We describe the implementation of a radio frequency (RF) cavity operating in the continuous wave regime to compress high repetition rate electron bunches from a 40.4 kV DC photoinjector for ultrafast electron diffraction applications. Active stabilization of the RF amplitude and phase through a feedback loop based on the demodulated in-phase and quadrature components of the RF signal is demonstrated. This scheme yields 144 ± 19 fs RMS temporal resolution in pump-probe studies.