Qilian Orogenic Belt Research Articles

Chemical and isotopic characteristics and origins of thermal springs in the Jiangcang Basin, China

Thermal springs in the Jiangcang Basin occur in a typical geothermal zone along the northeastern edge of the Qinghai-Tibet Plateau in the northern Qilian orogenic belt. The thermal spring water (TSW) in this region can be divided into three groups on the basis of temperature and salinity, but the origin and recharge-discharge mechanism of the geothermal fluid remain unclear. The chemical and isotopic characteristics of these thermal springs were studied, and the genesis of the thermal system hosted by deep-seated faults was assessed. The results indicate that the springs in this region are of meteoric origin and heated via deep circulation through well-developed faults. The TSW in the Datong River washland and in the southern part of the basin are derived from carbonate rocks recharged from Datong Mountain, whereas the TSW in the northern part of the basin originates from silicates recharged from Tuolai Mountain. Differences in the circulation depth, flow pathway, residence time, and mixing relationship with cold water lead to different TWS characteristics. The results are used to establish a conceptual model of the origins and circulation of the Jiangcang thermal springs. These findings provide a geological and scientific basis for the development and use of geothermal resources in the northeastern Qinghai-Tibet Plateau.

Provenance and paleogeography of Carboniferous–Permian strata in the Bayanhot Basin: Constraints from sedimentary records and detrital zircon geochronology

The Bayanhot Basin is a superimposed basin that experienced multiple-staged tectonic movements; it is in the eastern Alxa Block, adjacent to the North China Craton (NCC) and the North Qilian Orogenic Belt (NQOB). There are well-developed Paleozoic–Cenozoic strata in this basin, and these provide a crucial window to a greater understanding of the amalgamation process and source-to-sink relationships between the Alxa Block and surrounding tectonic units. However, due to intensive post-depositional modification, and lack of subsurface data, several fundamental issues—including the distribution and evolution of the depositional systems, provenance supplies and source-to-sink relationships during the Carboniferous– Permian remain unclear and thus hinder hydrocarbon exploration and limit the geological understanding of this basin. Employing integrated outcrop surveys, new drilling data, and detrital zircon dating, this study examines the paleogeographic distribution and evolution, and provenance characteristics of the Carboniferous–Permian strata in the Bayanhot Basin. Our results show that the Bayanhot Basin experienced a long-term depositional evolution process from transgression to retrogression during the Carboniferous–late Permian. The transgression extent could reach the central basin in the early Carboniferous. The maximum regional transgression occurred in the early Permian and might connect the Qilian and North China seas with each other. Subsequently, a gradual regression followed until the end of the Permian. The northwestern NCC appeared as a paleo-uplift area and served as a sediments provenance area for the Alxa Block at that time. The NCC, Bayanwula Mountain, and NQOB jointly served as major provenances during the Carboniferous–Permian. There was no ocean separation, nor was there an orogenic belt between the Alxa Block and the NCC that provided sediments for both sides during the Carboniferous–Permian. The accretion of the Alxa and North China blocks should have been completed before the Carboniferous period.

Carboniferous–Permian transgression/regression mechanisms in the Eastern Ordos Basin and their sea-level spatiotemporal variability: Insights from source-to-sink systems

Developed on the North China Craton, the intracratonic Ordos Basin contains a complete Paleozoic-to-Cenozoic sediment record, allowing for long-term paleoenvironmental and climate change investigation. During the Carboniferous–Permian period, convergence between the North China block and the paleo-Yangtze plate to the south resulted in a general marine regression characterized by a series of second-order transgression/regression cycles diachronous along the eastern margin of the Ordos. However, the detailed mechanisms that induced these cycles, as well as the associated paleoecological changes, remain unknown. In this study, we integrate multiple indices, including δ18O and δ13C, rare earth element (REE), paleontological assemblages, and clay content (w (chlorite + kaolinite)/w((Illite) ratio) planar distribution, to restore the paleo-water depth distribution. These parameters are then used to reconstruct the paleo-sea level from the Pennsylvanian to the middle Permian. We conclude that the direction of second-order transgression/regression was mainly toward the east during the Pennsylvanian–early Permian and switched clockwise toward the north during the middle Permian. We suggest that the second-order cycles, diachronous in space and time, are mainly linked to local variations in sediment supply and regional uplift. Using detrital zircon U–Pb data and the REE and trace element content and heavy mineral assemblages (HMA), we estimate the sediment provenance area. The sediment volumes deposited in the basin through time are obtained using 2D seismic data. During the Carboniferous, the coarse-grained sediments deposited in the eastern Ordos were derived from the uplifting Helan Mountain (Qiandam–Qilian orogenic belt). By the middle Permian, the detrital material became multi-sourced, thus issuing the Yinshan range to the north and the Qinling range to the south. We then integrate the description of numerous core samples with electric log and 2D seismic data to reconstruct the sediment facies associations across the first-order regression from the Carboniferous tidal flat depositional system to the middle Permian prograding fluvial delta system. According to the transfer of the glacial epoch, the sedimentation rate, and the transgression/regression rate above, we classify the evolution process into three patterns: low-transgression rate and less-sediment supply pattern (the late Carboniferous), high regression rate and mass sediment supply pattern (the north block during the early Permian), and low regression rate and mass sediment supply pattern (the south block during the Sakmarian stage). Lastly, with the quantitative calculation of the source-to-sink (S2S) parameters, including the S2S system volume and the elevated height of regional uplift with the 2D seismic data, we propose the mechanism of transgression/regression in the Ordos Basin, responding to the above three pattern s. The first pattern was controlled by regional uplift, whereas the second pattern was controlled by sediment supply. As to the third one, uplift and sediment supply could affect the transgression/regression process.

Lajishan Ayishan Formation Rhyolites: Implications for the Closure Time of the Proto‐Tethys Ocean

AbstractThe Qilian orogenic belt, as an important component of the central orogenic system, can be divided into three tectonic units from north to south: the North Qilian tectonic belt, the Central Qilian tectonic belt and the South Qilian tectonic belt. The Lajishan ophiolitic mélange zone is an important part of the South Qilian tectonic belt. The study of the formation age and tectonic attributes of the different rock units in the Lajishan is of great significance for reconstructing the tectonic evolution of the south Qilian tectonics belt and the Proto‐Tethys Ocean. The Ayishan formation is an important unit of the Lajishan mélange belt, but its stratigraphic age and formation environment are still not constrained, which limits the reconstruction of the early Palaeozoic tectonic evolution of the South Qilian tectonic belt and the closure time of the Proto‐Tethys Ocean. In recent years, a set of rock assemblages consisting of andesite, rhyolite, sandstone and pebbly sandstone have been identified in the Ayishan formation exposed in the Lajishan through detailed geological mapping in the field. They are in fault contact with the underlying ophiolite mélange.Regionally, a volcano‐sedimentary succession consisting of andesite, rhyolite, volcanic breccia, and volcaniclastic sandstone nonconformably overlies the Cambrian arc‐accretionarycomplex system in the Ayishan area. These rocks were originally assigned to the Ayishan formation and attributed an Early Ordovician age (BGMRQP, 1964, 1991). Our rhyolite samples from the Ayishan formation yielded a weighted mean 206Pb/238U age of 447 Ma using zircon U‐Pb dating, which can be interpreted as the eruption age of the volcanic rocks. These volcanic rock assemblages are distributed in sandstone, pebbled sandstone and conglomerate in the form of interlayers. Therefore, the zircon U‐Pb age of the volcanic rocks can constrain the age of Ayishan formation that it should belong to the late Ordovician rather than early Ordovician. Additionally, we propose that the Ayishan rhyolites were formed in collision‐related tectonic setting based on the geochemistry of the rhyolites, which means the initial continental collision between the Central Qilian block and the Qaidam block occurred at least in the Late Ordovician.Ayishan formation are in fault contact with the Cambrian Donggoumeikuang complex in the south. The Donggoumeikuang complex represents a Cambrian introceanic subduction system that formed in response to subduction of the Proto‐Tethyan Ocean (Yan et al., 2015; Fu et al., 2018). At 450 to 420 Ma, the Proto‐Tethyan Ocean closed and the Qaidam block collided against the central Qilian tectonics belt. Voluminous 450–440 Ma I‐type and S‐type granites (Yan et al., 2015; Tung et al., 2016) that straddle the Central and South Qilian belts formed a broad Andean‐type continental margin (Yan et al., 2019), which indicates that the transition from oceanic subduction to continental subduction occurred in 450–440Ma. At 440–420 Ma, the syncollisional and postcollisional granitoids extensively developed, accompanied by high‐pressure granulite‐facies metamorphism and anatexis in the South Qilian belt and the Qaidam block (Yu et al., 2014; Yan et al., 2015; Fu et al., 2018; Li et al., 2018).

Formation Age and Tectonic Setting of the Muli Arc‐Ophiolite Complex in the South Qilian Belt, NW China

AbstractThe Qilian orogenic belt is the northernmost orogen of the Tethyan domain and connects the Altaids to the north. It contains an assembly of Precambrian micro‐continental fragments, early Paleozoic island arcs, accretionary complexes, ophiolites, forearc and backarc basins, and high‐pressure (HP) metamorphic rocks, indicating a long history of accretionary processes. Spatially, this orogen is adjacent to the Tarim, Qaidam, and North China blocks, which also extends into accretionary orogenic belts to the east and SW such as the Qinling and Kunlun belts. Abundant ophiolites in this orogen record the closure of an early Tethyan Ocean and amalgamations between micro‐continents of North China, Qaidam, and Tarim. Thus, the ages and tectonic settings of these ophiolites within this belt provide important information regarding evolution of the Proto‐Tethys Ocean and assembly of micro‐continental blocks, which aids understanding of the spatial and temporal relationship of this orogen within the Tethyan realm.Dismembered ophiolites sporadically crop out along the northern margin of the South Qilian belt, and, from east to west, are locally referred to as the Lajishan, Gangcha, Muli, and Dadaoerji ophiolites. Much attention had been paid to these ophiolites, and several competing models for the tectonic evolution of this belt have been suggested. Considerable disagreement remains in respect of the temporal and spatial framework of the Qilian Orogen and details such as timing of subduction (s) and associated polarities, early collision events, and final closure of oceanic basins. In particular, the formation age and tectonic setting of Muli arc‐ophiolite complex remains unknown, which limits understanding of the tectonics of the South Qilian belt and the history of the Proto‐Tethys Ocean.The Muli arc‐ophiolite complex is distributed over 20 km2 west of the township of Muli in the western segment of the South Qilian Belt and consists of serpentinite, dunite, cumulate gabbro, basalt, plagiogranite, and chert. Field mapping results demonstrate that these units have been largely destroyed by faulting and generally occur as blocks/slices. They are tectonically interlayered with Upper Ordovician – Lower Silurian siliciclastic turbidite. Arc‐ophiolite rocks are intruded by 470–450 Ma subduction‐related granitoid plutons and are unconformably overlain by shallow marine to non‐marine sediments of Permian‐Jurassic age. Basalts show typical subduction‐related calc‐alkaline geochemical affinity, representing portions of an island arc. Geochemical results for plagiogranites and spinels from serpentinite demonstrate that the Muli arc‐ophiolite complex represents a super‐subduction zone (SSZ)‐type ophiolite.U‐Pb zircon data indicate formation associated with southward subduction of the Proto‐Tethyan Ocean during a short interval between 539–522 Ma. Voluminous Late Ordovician ‐ Early Silurian deep‐water marine siliciclastic and volcaniclastic turbidites and volcanic arc rocks are exposed to the south of the Muli arc‐ophiolite complex, whereas fluvial coarse‐grained sandstones and conglomerates unconformably overlie the Cambrian‐Middle Ordovician ophiolite‐arc systems in the eastern South Qilian Belt. These indicate that closure of the Proto‐Tethys Ocean was diachronous during the early Paleozoic.

Multiple generations of tourmaline from Yushishanxi leucogranite in South Qilian of western China record a complex formation history from B-rich melt to hydrothermal fluid

Abstract One tourmaline-bearing leucogranite dike occurs in the Yushishanxi Nb-Ta mining area in the Yushishan district of the South Qilian orogenic belt in western China. Abundant tourmalines have been identified in the leucogranite, including disseminated, crosscutting quartz-tourmaline veins and tourmaline veinlets. Detailed petrological, geochemical, and boron isotopic studies indicate that these tourmalines have distinctive core-rim zoning signatures and significant chemical variations, which can be divided into four paragenetic generations. Generation-I tourmalines in the leucogranite have a magmatic origin and were followed by hydrothermal Generation-II, Generation-III, and Generation-IV. Tourmalines from all four generations belong to the alkali group and the schorl-dravite solid-solution series. The most notable features are the variations in Mg, Fe, and Ca contents. The variable Mg/(Mg+Fe) ratios in generations I to IV may be attributed to the multiple influx and/or interaction of initially magma-derived hydrothermal fluid with surrounding rocks, magma-derived Fe-rich hydrothermal fluid, and external metamorphic fluid. In situ B-isotope analyses of tourmaline yield a total range of δ11B values from –11.7 to –6.0‰. The earliest Generation-I tourmalines have δ11B values of –11.1 to –9.6‰, whereas Generation-II and Generation-III tourmalines record a higher δ11B value of –9.5 to –6.0‰ and –9.3 to –6.9‰, respectively. Such an increase is mainly controlled by boron-isotope fractionation between melt-fluid and tourmaline-fluid, Rayleigh fractionation, and also, to some extent, by a hydrothermal recharge from the same magma source. Generation-IV tourmalines have the lightest B-isotope values (down to –11.7‰). This shift back to lighter B-isotopes in the Generation-IV cannot be explained by closed-system crystallization and isotope fractionation of known phases. Alternatively, a lighter source of boron via fluid circulation from the surrounding metamorphic rocks can explain this light boron isotope composition. Therefore, we propose that an isotopically light fluid may have derived from B release during mica breakdown within the surrounding metamorphic rocks.

Petrogenesis and tectonic significance of the Early Devonian lamprophyres and diorites in the Alxa Block, NW China

The North Qilian orogenic belt (NQOB) has been defined as a subduction-collision zone between the Alxa Block and the Qilian Block during the Early Paleozoic. To constrain the post-collisional tectonic evolution of the NQOB, analyses of zircon U-Pb-Hf isotopes, whole-rock major, trace element and Sr-Nd-Pb isotope compositions of the newly discovered Early Devonian lamprophyres and diorites dikes from the Longshoushan area in southwestern margin of the Alxa Block were conducted. Zircon U-Pb dating yields emplacement ages of 400 ± 4 Ma and 403 ± 6 Ma for two lamprophyre dikes and 391 ± 3 Ma for two diorite dikes. The lamprophyres dikes are shoshonitic-high-K (calc-alkaline) in nature, and are characterized by SiO2 contents of 53.6–56.3 wt %, (87Sr/86Sr)i ratios of 0.7064 to 0.7072, εNd(t) values of 0.1–1.0, and zircon εHf(t) values of −8.0 to −2.9. The diorite dikes are high-K (calc-alkaline), and are characterized by MgO contents of 6.32–6.98 wt %, (87Sr/86Sr)i ratios of 0.7089–0.7137, εNd(t) values of −3.8 to −3.5, and zircon εHf(t) values of −9.9–0.4. Both the lamprophyre and diorite dikes show parallel enrichments in LREEs and LILEs and depletions in HREEs and HFSEs and have similar ratios of (206Pb/204Pb)i (17.587–18.133), (207Pb/204Pb)i (15.518–15.584) and (208Pb/204Pb)i (37.676–38.058). Geochemical and isotopic data suggest that the lamprophyre and diorite dikes were derived from low-degrees melts of amphibole- and phlogopite-bearing lherzolite and phlogopite-bearing lherzolite, respectively, in the spinel-garnet transition facies. Their parental magmas both experienced extensive fractional crystallization in a deep magma chamber and negligible crustal contamination during their ascent. Regarding the Palaeozoic tectonic development of the North Qilian orogenic belt, we propose that the Early Devonian lamprophyres and diorites possibly are related to North Qilian orogen unrooting and collapse and marking the end of the North Qilian orogenic events.

Geochemistry and zircon ages of the Yushigou diabase in the Longshoushan area, Alxa Block: implications for crust–mantle interaction and tectonic evolution

AbstractThe North Qilian orogenic belt in North China has been defined as a subduction–collision zone between the Alxa Block and the Qilian Block. We present petrography, zircon U–Pb geochronology, major- and trace-element geochemistry, and Sr–Nd–Pb–Hf isotope analysis for the Yushigou diabase from the Longshoushan area, which is located SW of the Alxa Block, aiming to understand its petrogenetic link to subduction processes. The Yushigou diabase belongs to the tholeiite series, and shows enrichment in light rare earth and large-ion lithophile elements, and a depletion in heavy rare earth and high-field-strength elements. Laser ablation – inductively coupled plasma – mass spectrometry U–Pb zircon dating yielded an emplacement age of 414 ± 9 Ma, with an ϵHf(t) value in the range of −10.3 to 1.8. The whole-rock initial 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios of the diabase range over 16.811–17.157, 15.331–15.422 and 37.768–37.895, respectively. The (87Sr/86Sr)i ratios vary between 0.7086 and 0.7106, and ϵNd(t) values vary between −14.4 and −13.4, which are significantly higher than the ϵHf(t) value (Nd–Hf decoupling). An interpretation of the elemental and isotopic data suggests that the Yushigou diabase was derived from partial melting of an enriched mantle I (EM-I) -type lithospheric mantle in the spinel–garnet transitional zone. Based on the geochemical features and previous regional geological data, we propose that the Silurian magmatism was most likely triggered by slab break-off after the closure of the North Qilian Ocean, and ancient continental materials from the subduction slab metasomatized the overlying lithospheric mantle during exhumation.

Early Neoproterozoic magmatism in the Central Qilian block, NW China: Geochronological and petrogenetic constraints for Rodinia assembly

Abstract The supercontinent Rodinia existed as a coherent large landmass from 900 to 750 Ma and is now dispersed over all current major continents. Controversy has long surrounded the reconstructions of the East Asian blocks in Rodinia, especially the South China craton and nearby microcontinents. The Central Qilian block is a Precambrian microcontinent in the early Paleozoic Qilian orogenic belt, which is located in the northeastern part of the Qinghai-Xizang (Tibet) Plateau and marks the junction of the North China, South China and Tarim cratons. The formation and tectonic affinity of the Precambrian basement in the Central Qilian block is unclear, which affects our understanding of the assembly of Rodinia. The Huangyuan Group and the Maxianshan Group crop out in the eastern part of the block and represent the lower part of the basement. In this paper, we present a systematic study of the petrology, whole-rock geochemistry, and geochronology of amphibolites and orthogneisses from the Huangyuan and Maxianshan Groups. The protolith of the amphibolites was tholeiitic and calc-alkaline gabbro or gabbroic diorite formed in a continental arc environment, with laser ablation–inductively coupled plasma mass spectrometry (LA-ICPMS) zircon U-Pb ages of 967–957 Ma, a wide range of εHf(t) values of –3.74 to +5.06 and TDM1 model ages peaking at 1470 Ma and 1607 Ma. Minor inherited zircon grains with older ages of 1207–1515 Ma were collected from the amphibolites. The primitive magma was derived from partial melting of a spinel-facies fertile (lherzolite) lithospheric mantle that was modified by fluids and melts from a subducted slab. Fractionation of olivine, Fe-Ti oxides and plagioclase played a dominant role in the magma differentiation for gabbroic rocks in the Huangyuan Group, while fractionation of olivine and clinopyroxene controlled differentiation to form Maxianshan Group gabbros. The protolith of orthogneisses includes weakly peraluminous I-type and A2-type granites with consistent LA-ICPMS zircon U-Pb ages of 963–936 Ma, a wide range of εHf(t) values of –3.86 to +6.15 and TDM2 model age peaks at 2001 Ma and 1772 Ma. A few inherited zircon grains yield ages of 1033–2558 Ma. The peraluminous I-type granites resulted from a low-pressure partial melting process and the peraluminous A-type granites were derived from a charnockite source heated by large-scale magmatic underplating. Fractionation of plagioclase, biotite, and K-feldspar from the magma played the main role during the generation of the granitoids. The intrusion of these granites is related to a back-arc extension. It is inferred that the lower part of Precambrian basement of the Central Qilian block is composed mainly of early Neoproterozoic rock assemblages formed in a trench-arc-basin system during the assembly of the Rodinia supercontinent, with probable existence of late Paleoproterozoic to Mesoproterozoic continental nuclei. Combining our results with existing data, we identify a sequence of initial intra-oceanic subduction (ca. 1121–967 Ma) in front of a continental nucleus, continuous subduction of oceanic crust beneath the continental mass with formation of a mature continental arc and a back-arc basin (ca. 967–896 Ma) and continental rifting (<ca. 882 Ma) during the formation of the Central Qilian block. As a mature continental arc after ca. 967 Ma, the Central Qilian block was located at the margin of Rodinia and faced the Neoproterozoic Mirovoi Ocean. The breakup of the supercontinent left the Central Qilian block as a late Neoproterozoic isolated arc terrane.

Provenance and Implication of Carboniferous–Permian Detrital Zircons from the Upper Paleozoic, Southern Ordos Basin, China: Evidence from U-Pb Geochronology and Hf Isotopes

Carboniferous–Permian detrital zircons are recognized in the Upper Paleozoic of the whole Ordos Basin. Previous studies revealed that these Carboniferous–Permian zircons occurred in the Northern Ordos Basin mainly originated from the Yinshan Block. What has not been well documented until now is where this period’s zircons in the Southern Ordos Basin came from, and very little discussion about their provenance. To identify the provenance of the detrital zircons dating from ~350 to 260 Ma, five sandstone samples from the Shan 1 Member of Shanxi Formation and eight sandstone samples from the He 8 Member of Shihezi Formation were analyzed for detrital zircon U-Pb age dating and in situ Lu-Hf isotopic compositions. The results indicate that the two age clusters of 520–378 Ma and ~350–260 Ma in the Southern Ordos Basin most likely derived from the North Qinling Orogenic Belt–North Qilian Orogenic Belt and the North Qinling Orogenic Belt, respectively. Furthermore, we propose that the zircons aging ~320–260 Ma are representative of the important tectonothermal events occurred in the North Qinling Orogenic Belt during the Late Paleozoic.

Structural anatomy of the early Paleozoic Laohushan ophiolite and subduction complex: Implications for accretionary tectonics of the Proto-Tethyan North Qilian orogenic belt, northeastern Tibet

Abstract Recognition of accretionary tectonics in ancient orogenic collages is important for reconstructing the long-term subduction, accretion, and erosional history of fossil convergent margins, and for understanding crustal growth and supercontinent assembly. The North Qilian orogenic belt (NQOB), located between the Alxa block and the Central Qilian–Qaidam block in northeastern Tibet, is a typical Phanerozoic accretionary-to-collisional orogenic belt that represents the termination of the northern branch of the Proto-Tethys Ocean. It contains two subparallel ophiolitic belts, arcs, and subduction complexes; the ophiolitic rocks in the northern belt have generally been considered to have formed in a back-arc setting. However, the subduction-accretion-collision history, subduction polarity, and timing of closure of the back-arc ocean remain equivocal. To address these problems, we conducted detailed field, structural, and geochronological investigations of the Laohushan ophiolite–accretionary complex and related sedimentary rocks in the eastern NQOB. The Laohushan Complex is divisible into (1) a northern sedimentary forearc, and a supra-subduction zone-type ultramafic-mafic forearc (ca. 450 Ma) composed of serpentinized harzburgite, gabbro, basalt, and plagiogranite; and (2) a southern accretionary complex, which consists of relatively coherent basalt-chert-mudstone ocean plate stratigraphy that is structurally repeated many times, trench-fill turbidites, mélanges, and widespread thrust imbricates and duplexes, block-in-matrix and asymmetric structures. Kinematic analysis indicates that the accretionary complex underwent southward thrusting and shearing; coupled with the spatial architecture of the different tectonic units, which suggests northward subduction beneath the northern forearc on the southern margin of the Alxa block. Detrital zircon ages of forearc clastic sandstones, pelagic mudstones, trench-fill turbidites, and the matrix of mélanges, together with the zircon ages of igneous ophiolitic rocks and post-accretionary intrusions, indicate that the terminal accretion and tectonic stacking of the Laohushan subduction complex was between ca. 447 and 430 Ma. We propose a geodynamic model involving back-arc basin opening (ca. 517–449 Ma), intra-oceanic subduction-accretion (ca. 449–430 Ma), and final obduction of the northern forearc to account for the evolutionary processes of the North Qilian back-arc basin. The anatomy of the forearc ophiolite and structurally lower accretionary complex indicates the complicated origins and mechanism of emplacement of the ophiolitic rocks. Field-based reconstruction of accretionary complexes and upper plate ophiolites, together with provenance analysis of related sedimentary sequences, provide crucial constraints on the prolonged evolution of paleo-ocean basins and accretionary-to-collisional orogens.

Tectono-magmatic events of the Qilian orogenic belt in northern Tibet: new insights from detrital zircon geochronology of river sands

ABSTRACT The Precambrian–Palaeozoic evolution of the Qilian orogen is widely debated due to the complexity of the orogen’s structure and the extent of Phanerozoic deformation. In order to identify the tectono-magmatic events of the Qilian orogenic belt, we conducted detrital zircon U-Pb geochronology on river sediments across the orogen. The results indicate that the detrital zircon ages mainly comprise five populations: 220–280 Ma, 400–520 Ma, 800–1000 Ma, 1200–2100 Ma, and 2200–2700 Ma. The sediments in the Central Qilian Block exhibit zircon age peaks at ~1.8 Ga and ~1.0 Ga, which support that the Central Qilian Block successively accreted to the Columbia and Rodinia supercontinents. The sediments in the Quanji Block exhibit zircon age peaks at ~1.8 Ga and ~2.5 Ga, revealing possible affinity of the Quanji Block to the North China Craton prior to the Neoproterozoic. The detrital zircon age population in 400–520 Ma of all the sediments recorded the continental aggregation process among the Quanji, Qaidam, and Central Qilian Blocks. The widespread 200–300 Ma zircon ages in Central Qilian, Quanji, and North Qaidam regions, reflect a tectono-magmatic event which was most likely associated with the low-angle Paleo-Tethys subduction at the southern margin of Qaidam Block. Our results underline that the overlooked Neoarchean to Paleoproterozoic and Permian to Triassic tectono-magmatic events of the Qilian orogenic belt deserves more attention in the future study. The detrital zircon age populations of different river sand samples indicate fairly high variability, highlighting that caution should be exercised while using modern river sand detrital zircon age signatures to track tectono-magmatic history of such complex orogens.

Petrogenesis and tectonic setting of Early Paleozoic granites and high-Mg diorites in the Northern Qilian Orogen, China

The Northern Qilian Orogenic Belt (N-QOB) was formed by oceanic subduction and collision between the Alashan and Central Qilian Belt in the Early Paleozoic. New zircon U–Pb ages, Hf isotopic and whole-rock elemental data of the intrusive rocks in the central N-QOB have been conducted to constrain the tectonic evolution of N-QOB. Zircon dating results revealed that the Ladonggou, Suyougou granitic plutons and Xichagou dioritic pluton were emplaced at 505 ± 3 Ma, 471 ± 3 M and 425 ± 3 Ma, respectively. The Ladonggou monzogranite displays depletion of Nb, Ta, Ti, P and negative εHf(t) values (−6.5 to −0.3), and old Hf crustal model ages (1.5–1.9 Ga), suggesting generation from melting of ancient crust above subducted North Qilian oceanic slab. The Suyougou granite possesses geochemistry of I-type granite. The relative enrichment of LILEs, depletion of HFSEs and negative Eu anomalies, as well as prominent Hf isotope heterogeneities and old Hf crustal model ages (2.1–2.5 Ga) suggest a magma source of ancient crust mixed with minor mantle-derived melts in a subduction-related setting. Diorites from the Xichagou plutonare characterized by high Mg# values, enrichments in Cr, Ni, Y, Yb and high Sr/Y ratios, and convincing subduction-related features, suggesting generation from partial melting of subducted sediments mixed with mantle components. Taking all these geochemistry and geochronology together with the regional geology, we interpreted the Ladonggou monzogranite, Suyougou granite and Xichagou diorite were related to the long-term northward subduction of North Qilian oceanic lithosphere during ca. 505 and 425 Ma.

Petrography and geochemistry of the Lower Silurian sandstones from the Angzanggou Formation in the North Qilian Belt, China: implications for provenance, weathering and tectonic setting

AbstractThe North Qilian Orogenic Belt is on the northeastern margin of the Tibetan Plateau. It is connected with the Alxa Block in the north and the Tethyan orogenic assemblage in the south. The Lower Silurian Angzanggou Formation, deposited in the northern area of the North Qilian Orogenic Belt, is the most important for revealing the architecture and orogenic processes of the North Qilian Belt. Provenance analysis of the Angzanggou Formation can reveal not only the tectonic evolution of the central orogenic belt of China but also Palaeozoic Asia plate reconstructions. Petrographic analysis indicated that the compositional and textural maturity of the sandstones was low. The detrital composition of the Angzanggou Formation samples consists of quartz (8–14 %), feldspar (6–29 %) and lithic fragments (56–86 %). The sandstones could be classified as litharenites or feldspathic litharenites. The detrital modal composition suggests that these sandstones were probably deposited in a fore-arc basin. The element ratios and some discrimination diagrams based on geochemistry indicate that felsic and intermediate rocks were the main source rocks. The SiO2/Al2O3 ratio, the index of chemical variability and the Th/Sc versus Zr/Sc discrimination diagram suggest that the compositional maturity and degree of recycling were moderate to low. The index of alteration (CIA) and the A–CN–K diagram indicate the intensity of weathering was moderate. The discrimination diagrams based on major and trace elements and petrographic discrimination diagrams imply that the Angzanggou Formation rocks were derived from a continental island arc, and a sedimentary cover probably overlaid the volcanic arc. Therefore, we infer that during Early Silurian time the North Qilian Belt sediments accumulated in a fore-arc basin.

Partial melting of thickened lower crust in post‐collisional setting: Evidence from high silicon adakitic granites in the North Qilian orogen

During orogenic extension, partial melting of the continental crust usually produces post‐collisional granitoids, and the characteristics of their petrogenesis can provide crucial constraints on the geodynamics of tectonic regimes and post‐collisional lithospheric processes. A case study for this issue is the high‐silicon adakitic granites from the Jingtieshan area, North Qilian orogenic belt. In this study, we present a range of evidences on petrology, zircon U‐Pb dating, zircon Lu‐Hf isotopic composition, whole‐rock geochemistry, and Sr‐Nd isotopes from the studied high‐silicon adakitic granites to better understand the geodynamic processes of the North Qilian orogenic belt. The adakitic rocks consisted of plagioclase (55–60 %), K‐feldspar (5–10 %), quartz (20–25 %), and a small amount of biotite and accessory minerals. Zircon grains from the studied sample yielded a weighted mean 206Pb/238U age of 430 ± 2 Ma (MSWD = 0.96) with positive εHf(t) values (−1.4 to +6.3, with an average of +4.2). Geochemical results suggested that the adakitic rocks were enriched in LREE without evident Eu anomalies (except for one sample; δEu = 0.32–0.41), and these samples exhibited high Sr/Y ratios with negative εNd(t) values (−4.9 to −3.1). A combined study of petrology and geochemical arguments lead us to propose that the high‐silicon adakitic granites from the Jingtieshan area within the North Qilian orogenic belt were generated by partial melting of the thickened crust in a post‐collisional tectonic setting and that the adakitic melts were derived from the partial melting of the metabasite that was emplaced into the crust during the late Proterozoic‐early Neoproterozoic.

Lithospheric SH Wave Velocity Structure Beneath the Northeastern Tibetan Plateau From Love Wave Tomography

AbstractThe northeastern (NE) Tibetan plateau has been a prime site to understand the dynamic processes responsible for the rise and lateral growth of the Tibetan plateau. Here we construct a high‐resolution lithospheric scale isotropic SH wave velocity model (down to the depth of 130 km) for the NE Tibetan plateau and its adjacent regions based on the measurements of fundamental‐mode Love wave dispersions (20–100 s) with seismic data recorded by ChinArray II and China Digital Seismic Array using two‐plane wave method. Prominent slow SH wave velocity (VSH) is observed in the midlower crust of the NE Tibetan plateau, specifically in the Qilian Orogenic Belt and the Songpan‐Ganzi Terrane regions, coincident with previously indicated significantly slow SV wave velocity (VSV), probably implying the existence of partial melts in the midlower crust. This low SH wave velocity anomaly could be traced down to the uppermost mantle, indicating a weak and warm lithosphere, which we interpret as a consequence of asthenosphere upwelling after lithospheric mantle removal in the NE Tibetan plateau. The asthenosphere upwelling and associated deep‐seated thermal buoyancy could explain the occurrence of partial melting in the mid‐lower crust and account for parts of high elevations in the NE Tibetan plateau. The western Qinling orogenic belt is characterized with a high velocity anomaly in most of lithosphere, which is inconsistent with the existence of channel flow within the lithosphere along the Qinling orogenic belt from the Tibetan plateau.

Geology, Fluid Inclusions and Stable Isotopes of the Xialiugou Polymetallic Deposit in North Qilian, Northwest China: Constraints on its Metallogenesis

The Xialiugou polymetallic deposit is located in the North Qilian Orogenic Belt, Northwest China, of which the main ore-bearing strata are the Middle Cambrian Heicigou Group. The mineralization is zoned with “black” orebodies (galena–sphalerite), which are stratigraphically above the “yellow” orebodies (pyrite–chalcopyrite–tennantite) at the lower zone, corresponding to the alteration assemblages of quartz–sericite in the ore-proximal zone and chlorite in the ore-distal zone. The Xialiugou mineralization can be divided into three stages: (1) Stage I (pyrite); (2) Stage II (chalcopyrite–tennantite–sphalerite); and (3) Stage III (galena–sphalerite). Fluid inclusions data indicate that the physicochemical conditions that lead to ore formation were the medium–low temperature (157–350 °C) and low salinity (0.17–6.87 wt % NaCleqv), and that the ore-forming temperature tended to decrease with the successive mineralization processes. Taking the H–O isotopic compositions (δDV-SMOW = −51.0‰ to −40.5‰, δ18OH2O = −0.4‰ to 8.6‰) into consideration, the ore-forming fluids were most likely derived from seawater with a small amount of magmatic- and meteoric-fluids input. In addition, the combined S (−3.70‰ to 0.10‰) and Pb isotopic (206Pb/204Pb = 18.357 to 18.422, 207Pb/204Pb = 15.615 to 15.687, 208Pb/204Pb = 38.056 to 38.248) data of pyrite indicate that the ore-bearing volcanic rocks may be an important source of ore-forming materials. Finally, we inferred that the Xialiugou deposit shares similarities with the most important volcanogenic massive sulfide (VMS) deposits (Baiyinchang ore field) in China and typical “black ore” type VMS deposits worldwide.

Discrepancy between bulk-rock and zircon Hf isotopes accompanying Nd-Hf isotope decoupling

Abstract Zircon is an important accessory mineral for studying the crust-mantle interaction and crustal growth through time because zircon crystals not only allow precise dating but also record initial Hf isotope ratios of the host magma. Our study on a suite of gabbronorite, mafic diorite cumulate, diorite and granite from the Kekeli Batholith in the North Qilian Orogenic Belt, Northern Tibetan Plateau, shows (1) a significant Hf isotope discrepancy between zircon and their bulk rocks; and (2) bulk-rock Nd-Hf isotope decoupling. These observations thus demonstrate that zircons do not always capture the full history of magmatic system. The significant positive correlation between bulk-rock Hf isotope ratios and TiO2 content (R2 = 0.94) indicates that Ti-rich minerals (e.g., ilmenite, amphibole) are likely important Hf hosts. The early-formed Ti-rich minerals possibly record different Hf isotopes from those of zircons crystallized subsequently, thus causing discrepancy between zircon and bulk-rocks and leading to bulk-rock Nd-Hf isotope decoupling. Correlations between bulk-rock TiO2 content, Mg isotopes and Hf isotopes indicate a mixing process, with granite and gabbronorite representing two compositional endmembers. Because Ti minerals have higher crystallization temperatures than zircons, when the mixing melts have contrasting isotopes (or from heterogeneous sources/have a strong crustal contamination), the bulk-rock and zircon Hf isotope discrepancies reflect mineral crystallization sequence during mafic and felsic magma mixing. It is thus imperative to consider early formed minerals such as Ti-rich minerals and the bulk rock composition, not just zircons, when using Hf isotopes to track melt evolution and precisely constrain mantle contribution to granitoid petrogenesis.

Petrogenesis of Early Silurian granitoids in the Longshoushan area and their implications for the extensional environment of the North Qilian Orogenic Belt, China

Analyses of the zircon U—Pb age, mineralogical chemistry and whole-rock geochemistry of the Jiling pluton along the southern margin of the Alxa Block were conducted. The results of these analyses will provide crucial information for investigations of Paleozoic crust-mantle interactions in the North Qilian Orogenic Belt (NQOB) and explorations of the transition age from a compressional to extensional environment during the collision between the Alxa Block and the Qilian-Qaidam Block. The zircon dating results reveal that the Jiling pluton is composed of Early Silurian granitoids (435–442 Ma) with contemporaneous mafic microgranular enclaves (MMEs). Most granitoids contain amphibole and titanite and have A/CNK values <1, illustrating that they belong to amphibolite-rich calc-alkaline granitoids (ACGs) and K-rich and K-feldspar porphyritic calc-alkaline granitoids (KCGs). Both the granitoid and MME samples display variable initial Sr and Nd isotopic compositions. We suggest that the Jiling pluton was formed by crust-mantle-derived magma mixing. The high HFSE content of the MMEs indicates that the mantle-derived magmas were derived from melting of the mantle wedge metasomatized by adakitic magma, and the crustal-derived magmas were derived from melting of Paleoproterozoic meta-basaltic rocks in the Longshoushan Group. The discovery of the Jiling granitoids indicates that the NQOB was dominated by a compressional environment during Middle Ordovician-Early Silurian in response to the collision between the Qilian-Qaidam Block and the Alxa Block, and the initial extensional environment began before 442 Ma.

Deep seismic reflection profiling of the Qilian Orogenic Belt: evidence for bi‐directional subduction of the Proto‐Tethys Ocean plate and northward growth of the Qinghai‐Tibet Plateau

Deep seismic reflection profiling of the Qilian Orogenic Belt: evidence for bi‐directional subduction of the Proto‐Tethys Ocean plate and northward growth of the Qinghai‐Tibet Plateau