Pumped Storage Research Articles

Ensembled snake optimiser to solve multiobjective mixed energy generation scheduling

This paper presents Ensembled Snake Optimiser (ESO), to optimise the scheduling of mixed energy generation from coordinated thermal, hydro, pumped-storage hydro, and solar units. It tackles operational constraints while minimising non-convex and non-linear objectives. To reduce the pollutants emitted and operating cost of thermal and solar units, the mixed energy generation scheduling problem uses committed hydro, thermal, and solar units to generate power, pumped-storage hydro units to maintain water levels, and hydro units to maximise available water volume. Utilising the water volume and actively exceeding the power-generating limit are the primary obstacles to satisfy the load requirement. The heuristics are utilised to satisfy the load demand and water volume constraints. The binary-optimistic approach commits solar units. The snake optimisation algorithm tends to get trapped in the local minima while solving complex engineering optimisation problems, which leads to sluggish convergence behaviour. A local search, simplex search, and extended opposition-based learning are investigated to improve its exploitation aspect, convergence behaviour, and procure good solutions. Three electric power systems are undertaken for the simulation studies. ESO gives better results. The significant cost savings for integrated energy scheduling are ranging from 10–15%. The rapid convergence behaviour and whisker box plots justify ESO’s robustness.

Hybrid Renewable Systems for Small Energy Communities: What Is the Best Solution?

This research developed smart integrated hybrid renewable systems for small energy communities and applied them to a real system to achieve energy self-sufficiency and promote sustainable decentralized energy generation. It compares stand-alone (SA) and grid-connected (GC) configurations using a developed optimized mathematical model and data-driven optimization, with economic analysis of various renewable combinations (PV, Wind, PHS, BESS, and Grid) to search for the optimal solution. Four cases were developed: two stand-alone (SA1: PV + Wind + PHS, SA2: PV + Wind + PHS + BESS) and two grid-connected (GC1: PV + PHS + Grid, GC2: Wind + PHS + Grid). GC2 shows the most economical with stable cash flow (−€123.2 annually), low CO2 costs (€367.2), and 91.7% of grid independence, requiring 125 kW of installed power. While GC options had lower initial investments (between €157k to €205k), the SA configurations provided lower levelized costs of energy (LCOE) ranging from €0.039 to €0.044/kWh. The integration of pumped hydropower storage enhances energy independence, supporting peak loads for up to two days with a storage capacity of 2.17 MWh.

Chaotic Analysis of the Reversible Pump Turbine Exhaust Process in Pump Mode Based on a Data-driven Method

Due to the important strategic position of Pumped Storage Power Plants (PSPP) in global energy upgrading, conducting in-depth research on the various operating conditions of pump turbine units is important for their safe and stable operation. This study sought to clarify the gas–liquid phase motion and the nonlinear chaotic characteristics of the process of exhaust and pressurization in pump mode; with the simplified objective model proposed here, a visualization of the process is achieved using data-driven methods, and the nonlinear characteristics of gas–liquid phase motion during the process are theoretically demonstrated. A method that combines data-driven and chaotic analysis is proposed to qualitatively and quantitatively analyze the force and torque time-series signals of the runner under different exhaust rates. The results indicate that the chaotic characteristics of the force signals and torque signals of the runner are not in a single linear relationship with the exhaust rates. Therefore, this research also provides guidance on exhaust rates with the aim of informing actual engineering practice, the purpose of which is to reduce the vibration amplitude caused by repetitive torque and improve the stability of the unit operations.

A multi-energy inertia-based coordinated voltage and frequency regulation in isolated hybrid power system using PI-TISMC

This paper proposes novel multi-energy inertia support for simultaneous frequency and voltage control of an isolated hybrid power system (IHPS). Multi-energy storage (gas inertia – hydrogen storage, thermal inertia – solar thermal storage, hydro inertia – gravity hydro storage, chemical inertia – battery energy storage) supported by demand side management (DSM) for simultaneous voltage and frequency regulation and backed by biodiesel generators, are the essential elements of IHPS. A novel control strategy of concurrent virtual droop control, virtual damping control, virtual inertia control, and virtual negative inertia control is proposed to utilise multiple inertia sources and to improve LFC and AVR performance effectively. The effective coordination of inertia sources in eradicating oscillations in IHPS, is aided by a developed cascaded proportional integral-tilt-integral-sliding mode (PI-TISMC) controller. The performance of PI-TISMC is compared with PID, PI-PID, and PI-SMC controllers. A maiden attempt has been done by training five diverse classes of optimization techniques to optimize the parameters of controllers in the present work. The results are evaluated in MATLAB and it is evident from the results that the performance of frequency control is improved by 6.5%, 7.8% and 3.4 s (over shoot, undershoot, and settling time). The performance of frequency control is improved by 6.5%, 7.8% and 3.4 s (over shoot, undershoot, and settling time). Similarly, the performance of voltage control is improved by 6.7%, 4.8% and 2.3 s (over shoot, undershoot, and settling time) by employing developed PI-TISMC controller and proposed concurrent inertia control. The combination exhibits superior performance in minimizing oscillations in IHPS due to variations in loading and solar insolation.

Trend Prediction of Vibration Signals for Pumped-Storage Units Based on BA-VMD and LSTM

Under “dual-carbon” goals and rapid renewable energy growth, increasing start-stop frequency poses new challenges to safe operations of pumped-storage power plant equipment. Ensuring equipment safety and predictive maintenance under complex conditions urgently requires vibration warnings and trend forecasting for pumped-storage units. In this study, the measured vibration-signal characteristics of pumped-storage units in a strong background-noise environment are obtained using a noise-reduction method that integrates BA-VMD and wavelet thresholding. We monitored the vibration-signal data of hydroelectric units over a long period of time, and the measured vibration-signal characteristics of pumped-storage units in a strong background-noise environment are accurately obtained using a noise-reduction method that integrates BA-VMD and wavelet thresholding. In this paper, a BP neural network prediction model, a support vector machine (SVM) prediction model, a convolutional neural network (CNN) prediction model, and a long short-term memory network (LSTM) prediction model are used to predict the trend of vibration signals of the pumped-storage unit under different operating conditions. The model prediction effect is analyzed by using the different error evaluation functions, and the prediction results are compared with the predicted results of the four different methods. By comparing the prediction effects of the four different methods, it is concluded that LSTM has higher prediction accuracy and can predict the vibration trends of hydropower units more accurately.

Distribution of Microorganisms and Antibiotic Resistance Genes in Production Wastewater During Pumped Storage Power Station Construction

The construction period of pumped storage power stations (PSPS) generates amounts of production wastewater, which may contain pathogenic bacteria and antibiotic resistance genes (ARGs) in these bacteria, potentially posing environmental and health risks. This study used the metagenome approach to analyze the distribution of microorganisms, ARGs and their correlation with water quality indicators in wastewater collected from two typical PSPSs. Coagulation system wastewater exhibits strong alkalinity (11.88), and aggregate system wastewater has high suspended solids (SS, 8 × 104 mg/L), resulting in lower richness and diversity of bacterial communities. Serpentinimonas, a kind of alkaliphilic bacteria, had the highest relative abundance (48.58–99.7%). The ARG subtypes obtained conferred wastewater resistance to tetracycline, macrolide, fluoroquinolone and so on, but wastewater treatment has limited removal effect on ARGs. The results indicate that resistant bacteria and resistance genes can still be present and distributed under highly alkaline conditions, and the removal efficiency of ARGs by wastewater treatment in PSPS is limited. Attention should be given to the environmental and health risks posed by production wastewater, thereby providing a theoretical basis for the sustainable development of the PSPS industry.

A new integrated modelling and control of ternary pumped storage hydro power generation for small signal stability studies

Pumped storage hydro power generation (PSHPG), a reliable renewable energy source with an energy storage feature, can impart efficient damping torque to power system oscillations to improve small signal stability with appropriate modelling and additional compensation through the governor. But ternary PSHPG (T-PSHPG) has the unique feature of hydraulic short circuit (HSC) mode, where both pumping and generating modes operate simultaneously. This study presents a novel fourth-order modified Heffron Phillips (MHP) model of T-PSHPG in coordination with a multi-band Power system stabilizer (MB-PSS) employing 2-way penstock, where primary penstock circulates water from the upper reservoir to the lower reservoir through the turbine and secondary penstock divides primary penstock, thereby creating short-circuit path through the pump. Also, this model includes additional reactive power droop control to maintain the voltage profile. A new state space matrix has been developed for coordinating T-PSHPG in HSC mode with MB-PSS. The control parameters of the proposed coordinated model are set by a new multi-objective differential evolution-improved particle swam optimization (DE-IPSO) algorithm. With variable load, random solar and wind source penetrations, it has been found that the proposed model can provide adequate damping actions. The sensitivity of the proposed model has been observed by varying critical model parameters by ±50 %. For all conditions, the settling time of speed variation is within 2.672 s to 5.951 s and the minimum damping ratio lies within 0.105 to 0.455. The minimum damping ratio is 0.32 and the settling time is found to be 3.1 s for system response subject to sudden solar power variation, which has been observed by shifting system eigenvalues toward the left half of the complex plane. Time and frequency domain parameters with sensitivity analysis predict system oscillations being damped effectively with consistency for the proposed modelling and control strategy. The results are verified in real-time with OPAL-RT real-time digital simulator. It has been justified by the present study that appropriate modelling of T-PSHPG along with coordinated control action provided by MB-PSS can handle critical power system oscillations efficiently and effective damping torque can be imparted in HSC mode.

Design of reliable standalone utility-scale pumped hydroelectric storage powered by PV/Wind hybrid renewable system

With a target of 35 % renewable energy in the country’s energy mix by 2030, the goal of this research is to support the Libyan government’s plan to maximize the use of environmentally friendly and sustainable energy sources. This will be accomplished by making effective use of the region’s plentiful natural resources. The feasibility of wind and solar energy has been established by local research, and the presence of highlands that can store pumped hydropower (PHS) makes hybrid renewable energy systems (HRES) even more feasible. These systems might offer a sizable edge over competitors in the regional energy market. In this study, PHS was utilized to stabilize electricity production in addition to storing energy. A hydropower turbine provides electricity to the load, and the PHS system is powered by a PV/wind supply. By lowering the volatility of wind and photovoltaic power generation, the suggested system could offer a more dependable renewable energy source without requiring complicated control mechanisms. This strategy could encourage a wider adoption of renewable energy, which could be especially advantageous for developing nations. Under particular load and climate conditions, the energy production of different solar PV array and wind turbine farm configurations was estimated using the System Advisor Model (SAM) software. The ideal HRES configuration consists of a 290 MW wind farm, a 154 MW solar PV field, and a 508 MW PHS system. This configuration will provide 100 % of the annual electrical demand of 513 GWh, plus a 20 % safety margin. The levelized cost of energy (LCOE), estimated at $211.65/MWh, is reduced by this configuration. It is anticipated that the $929.02 million initial investment will be recovered in 11 years, and the system will turn a profit in the following 9 years. Also, the planned HRES will stop 532.17 tons of CO2 emissions from being released each year.

Optimisation of Integrated Heat Pump and Thermal Energy Storage Systems in Active Buildings for Community Heat Decarbonisation

The electrification of residential heating systems, crucial for achieving net-zero emissions, poses significant challenges for low-voltage distribution networks. This study develops a simulation model to explore the integration of heat pumps within active building systems for community heating decarbonisation. The model optimises heat pump operations in conjunction with thermal energy storage units to reduce peak demand on low-voltage networks by using real-time measured electricity demand data and modelled heat demand data for 76 houses. The study employs an algorithm that adjusts thermal storage charging and discharging cycles to align with off-peak periods. Three scenarios were simulated: a baseline with unoptimised heat pumps, a fixed threshold model, and an active building model with daily optimised thresholds. The results demonstrate that the active building model achieves a 21% reduction in peak demand on the low-voltage substation compared to the baseline scenario; it also reduces the total electrical energy consumption by 12% and carbon emissions by 17%. The fixed threshold scenario shows a 16% improvement in peak demand reduction, but it also shows an increase in energy consumption and emissions. These findings highlight the potential of active buildings to enhance the efficiency and sustainability of residential energy systems, marking a significant step toward decarbonising residential heating while maintaining grid stability.

Reliable cost-efficient integration of pumped hydro storage in islanded hybrid microgrid for optimum decarbonization

The employment of renewable energy-based resources is growing rapidly, necessitating the use of energy storage technologies to effectively manage their intermittent power generation. This study proposes an optimal planning for various distributed generators in a microgrid system. The objective is to size and operate a reliable hybrid islanded microgrid with minimum total system operational cost. To determine the optimal energy management and size of each unit, the problem is formulated applying Particle Swarm Optimization methodology utilizing sets of historical data such as wind speed, solar irradiation, and load demand on an hourly basis. With the proposed methodology, the capacities of photovoltaic, wind turbine, pumped hydro storage, and fuel cell are optimized as 1300 kW, 1125 kW, 400 kW, and 1590 kW, respectively. The obtained results concluded that optimum size reduces 14.85 % and 22.6 % in the fuel cell consumption in summer and fall respectively. Furthermore, the amount of CO2 emission is reduced by 10.6 ton in those mentioned seasons. The results obtained indicate that the proposed system having cost of energy (COE) of 0.2961 ($/kWh), and an excess energy of 196.208 MWh. An effectiveness analysis highlights the significant impact of incorporating pumped hydro storage, increasing the reliability index by 50.9 %.

Characteristics of flow structure of lateral inlet/outlet in pumped storage power stations

Investigating the complex separated flows in lateral inlet/outlets of pumped-storage power stations(PSPS) is crucial for optimizing their design to ensure safe and efficient operation. In this study, Large Eddy Simulations (LES) are employed to reveal the relationship between turbulence intensity and the distribution of coherent structures in separated flows, as well as the evolution characteristics of hairpin vortices. The flow separation is notably influenced by the vertical diffusion angles α, which causes recirculation zones at the top of the inlet/outlet, leading to significant local flow velocities at the trash racks and increasing the risk of flow-induced vibration damage. Areas of high turbulence intensity exist at the top and bottom of the core flow, caused by the propagation of corresponding streams of vortical flow, which is identified as the primary cause of head loss in the inlet/outlet. Based on the average turbulence intensity, the inlet/outlet can be divided into zones of sharp turbulence increase, high turbulence intensity, and decreasing turbulence intensity. The vortical flow mainly includes three types of coherent structures: attached vortices, hairpin vortices, and quasi-streamwise vortices. Among these, the frequency of top hairpin vortices and the growth angle of hairpin vortex packets are highly susceptible to α. The growth direction of hairpin vortex packets closely aligns with the direction of turbulence intensity propagation. These findings contribute to optimizing the design of inlet/outlet of PSPS.

Transient behavior of pumped storage-wind hybrid power system under grid-connected operation condition

The large-scale grid connection of renewable energy represented by wind power threatens the safe and stable operation of electric system. The vigorous development pumped storage power station (PSPS) is a global consensus to support the grid-connected of renewable energy. This paper investigates the transient behavior of pumped storage-wind (PSW) hybrid power system under grid-connected operation condition (GCOC). Firstly, a model of PSW hybrid power system under GCOC is constructed. The stable domain is determined according to Hopf bifurcation theory. The influence of system parameters on the stability of PSW hybrid power system under GCOC is analyzed. A synergetic control strategy is designed to improve the dynamic performance of the system. Then, the mechanism of multi-time-scale dynamic response is revealed. Finally, the transient behavior of PSPS under different application scenarios and the interaction between PSPS and wind power station (WPS) are studied. The results show that the stability of PSW hybrid power system under GCOC can be judged by stable domain. The designed synergetic control strategy can improve the dynamic performance of the system. The dynamic response is composed of three oscillations with different frequencies, namely, mass oscillation at low frequency, water hammer oscillation at medium frequency, and electrical oscillation at high frequency. The principal oscillation is caused by water hammer. The interaction between PSPS and WPS has a significant effect on the transient behavior. By adjusting the interaction between PSPS and WPS, the system can absorb more wind power while ensuring safe and stable operation, which can increase profits and avoid unnecessary operation oscillations. The analytical methods and results presented in this paper are of great significance for improving the ability of power grid to accept renewable energy.

Optimal micro-pump-storage system for the average Greek hotel with PV generation

In this paper, a modern micro-scale pumped hydro storage system that is specifically designed to operate in coordination with photovoltaics installed at the roof of an average Greek hotel is presented. The fictitious hotel chosen as a case study, displays the energy profile of an average sea-side hotel around the Mediterranean Sea, while photovoltaics’ energy generation is assumed to follow the typical production profile of such sites. Pumped hydro storage and photovoltaic generation, size and cost have been appropriately modeled so that they realistically simulate their operational scheme, while also considering the spatial and technical characteristics and limitations of such projects. Results derived from the implementation of such a scheme into the Average Greek hotel demonstrated significant monetary benefits, accompanied with a substantial net annual profit and low payback period of the investment.

Optimal Flexibility Dispatching of Multi-Pumped Hydro Storage Stations Considering the Uncertainty of Renewable Energy

With the continuous increase in the penetration rate of renewable energy, the randomness and flexibility demand in the power system continues to increase. The main grid side of the power system vigorously develops pumped hydro storage (PHS) resources. However, the current PHS station scheduling method of a fixed time period and fixed power has lost a certain flexibility supply. In this paper, an optimal dispatching model of multi-pumped hydro storage stations is proposed to supply flexibility for different regions of the state grid in east China. Firstly, the credible predictable power (CPP) of renewable energy is calculated and the definition of flexibility demand of a power system is given. The calculation model for flexibility demand is established. Secondly, considering the regional allocation constraint in the state grid in east China, a non-centralized model of multi-PHS within the dispatch scope is established. In the model, the constraints of storage capacity of different hydropower conversion coefficients of each PHS station is considered. The flexibility supply model of PHS stations to each region of the state grid in east China is established to realize reasonable flexibility allocation. Then, by combining the PHS station models and the flexibility demand calculation model, the optimal dispatching model for the flexibility supply of multi-PHS stations is established. Finally, based on the network dispatching example, the effectiveness and superiority of the proposed strategy are verified by a case study.

Modelling a low-head seawater-pumped hydro storage system's impeller for energy production within a small island developing state

ABSTRACT The proposed seawater pumped hydro storage (SPHS) is one option for providing a buffered energy storage system that will surely be required in the future. Given the fact that most small island developing states (SIDS) are isolated and surrounded by large bodies of water, the medium of seawater becomes an infinite supply. However, SIDS are also low lying and therefore only low heads will be available at high flows to maximize the energy efficiency of the system. The computational fluid dynamics (CFD) model, ANSYS Fluent, was used to simulate this SPHS pump turbine impeller at low heads and high flows. This pump turbine impeller was simulated to function as both a pump and as a turbine at various revolutions per minute (rpm). The performance of the system was evaluated based on the pressure and velocity distributions of the pump turbine impeller at varying rpm. It was found that there were less energy losses within the turbine mode compared to the pump mode. Furthermore, this study showcases that the CFD model ANSYS Fluent is an economical, efficient, and easily diagnosable technique for analysing an impeller in both pump and turbine modes.

Multi-Criteria Decision-Making Approach for Optimal Energy Storage System Selection and Applications in Oman

This research aims to support the goals of Oman Vision 2040 by reducing the dependency on non-renewable energy resources and increasing the utilization of the national natural renewable energy resources. Selecting appropriate energy storage systems (ESSs) will play a key role in achieving this vision by enabling a greater integration of solar and other renewable energy. ESSs allow for solar power generated during daylight hours to be stored for use during peak demand periods. Additionally, the proposed framework provides guidance for large-scale ESS infrastructure planning and investments to support Oman’s renewable energy goals. As the global renewable energy market grows rapidly and Oman implements economic reforms, the ESS market is expected to flourish in Oman. In the near future, ESS is expected to contribute to lower electricity costs and enhance stability compared to traditional energy systems. While ESS technologies have been studied broadly, there is a lack of comprehensive analysis for optimal ESS selection tailored to Oman’s unique geographical, technical, and policy context. The main objective of this study is to provide a comprehensive evaluation of ESS options and identify the type(s) most suitable for integration with Oman’s national grid using a multi-criteria decision-making (MCDM) methodology. This study addresses this gap by applying the Hesitate Fuzzy Analytic Hierarchy Process (HF-AHP) and Hesitate Fuzzy VIKOR methods to assess alternative ESS technologies based on technical, economic, environmental, and social criteria specifically for Oman’s context. The analysis reveals pumped hydro energy storage (PHES) and compressed air energy storage (CAES) as the most appropriate solutions. The tailored selection framework aims to guide policy and infrastructure planning to determine investments for large-scale ESSs and provide a model for comprehensive ESS assessment in energy transition planning for countries with similar challenges.

Study on Operation Strategy of Pumped Storage Power Station Under Different Development Models- A case study of China

Study on Operation Strategy of Pumped Storage Power Station Under Different Development Models- A case study of China

3D modeling in land management design

The article substantiates the relevance of using 3D visualization of land management objects at the pre-design stage, examines the process of designing land use of the Kozlovskaya PSPP (pumped storage power plant) of the Chuvash Republic with the development of a 3D model in AutoCAD Civil 3D. The use of 3D modeling and visualization provides additional opportunities for the presentation of objects and decision-making, allowing to reduce the costs of the project by 1.5-2 times.

Converting second-order saddle points to transition states: New principles for the design of 4π photoswitches.

Molecular photoswitches have demonstrated potential for storing solar energy at the molecular level, with power densities comparable to commercial batteries and hydroelectric energy storage. However, development of efficient photoswitches is hindered by limitations in cyclability and optical properties of existing materials. We here demonstrate that certain limitations in photoswitches based on electrocyclizations stem from the issue of controlling competition between Woodward-Hoffmann allowed and forbidden pathways. Our approach moves beyond the traditional view of activation barriers and reveals that second-order saddle points are crucial in dictating the competition between disrotatory and conrotatory pathways. These insights suggest new opportunities to manipulate the competition between these pathways through geometric constraints, fundamentally altering the connectivity of the potential energy surface. Our study also emphasizes the necessity of multi-reference methods and the need to conduct higher-dimensional explorations for competing pathways beyond photoswitch design.

Doing dams better? A case study of a proposed pumped hydro scheme at Lake Onslow, Central Otago

AbstractWater resource managers and Geographers share common interests in meeting Sustainable Development Goal Seven (universal access to affordable energy) and addressing climate change. Hydropower plays a key role but dams have environmental, social and cultural consequences. The Hydropower Sustainability Assessment Protocol (HSAP) aims to ensure that dams are built safely and potential impacts are understood. This study of a proposed pumped hydro scheme at Lake Onslow in Central Otago, New Zealand, considers the effectiveness of HSAP. Results reported here show that HSAP works well but that it can also be improved by including new groups of stakeholders and by widening the perception of risks.