Pumped Storage Hydropower Plants Research Articles

Analysis and Suppression of Oscillations in Doubly Fed Variable Speed Pumped Storage Hydropower Plants Considering the Water Conveyance System

The doubly fed variable speed pumped storage (DFVSPS) system is a hydraulically, mechanically, and electrically coupled system, and the characteristics of the components from the water conveyance system to the transmission line need to be fully considered in the oscillation analysis. Hence, the model of the water conveyance system is included to investigate the oscillation characteristics of the DFVSPS connecting to the grid via a series-compensated line. A small-signal state-space model of the DFVSPS system in the generation mode is first established. The oscillation characteristics of the DFVSPS are studied, and the dominant state variables for each oscillation mode are identified. The impact of system parameters on oscillations is further studied, and simulations are carried out to validate the accuracy of the model. The results indicate the oscillation mode of the DFVSPS comprises the electrical sub-synchronous oscillation (SSO) mode and the hydraulically, mechanically coupled low-frequency mechanical oscillation modes. When the series compensation level is high, the SSO becomes divergent, and the system is more likely to be unstable. Optimizing the rotor-side control parameters and the governor control parameters, sub-synchronous and low-frequency oscillations could be effectively suppressed, respectively. This study provides reference suggestions for the development and use of the future DFVSPS system.

Capacity Optimization of Pumped–Hydro–Wind–Photovoltaic Hybrid System Based on Normal Boundary Intersection Method

Introducing pumped storage to retrofit existing cascade hydropower plants into hybrid pumped storage hydropower plants (HPSPs) could increase the regulating capacity of hydropower. From this perspective, a capacity configuration optimization method for a multi-energy complementary power generation system comprising hydro, wind, and photovoltaic power is developed. Firstly, to address the uncertainty of wind and photovoltaic power outputs, the K-means clustering algorithm is applied to deal with historical data on load and photovoltaic, wind, and water inflow within a specific region over the past year. This process helps reduce the number of scenarios, resulting in 12 representative scenarios and their corresponding probabilities. Secondly, with the aim of enhancing outbound transmission channel utilization and decreasing the peak–valley difference for the receiving-end power grid’s load curve, a multi-objective optimization model based on the normal boundary intersection (NBI) algorithm is developed for the capacity optimization of the multi-energy complementary power generation system. The result shows that retrofitting cascade hydropower plants with pumped storage units to construct HPSPs enhances their ability to accommodate wind and photovoltaic power. The optimal capacity of wind and photovoltaic power is increased, the utilization rate of the system’s transmission channel is improved, and the peak-to-valley difference for the residual load of the receiving-end power grid is reduced.

Maximization of Total Profit for Hybrid Hydro-Thermal-Wind-Solar Power Systems Considering Pumped Storage, Cascaded Systems, and Renewable Energy Uncertainty in a Real Zone, Vietnam

The study maximizes the total profit of a hybrid power system with cascaded hydropower plants, thermal power plants, pumped storage hydropower plants, and wind and solar power plants over one operation day, considering the uncertainty of wind speed and solar radiation. Wind speed and solar radiation in a specific zone in Vietnam are collected using the wind and solar global atlases, and the maximum data are then supposed to be 120% of the collection for uncertainty consideration. The metaheuristic algorithms, including the original Slime mould algorithm (SMA), Equilibrium optimizer, and improved Slime mould algorithm (ISMA), are implemented for the system. ISMA is a developed version of SMA that cancels old methods and proposes new methods of updating new solutions. In the first stage, the cascaded system with four hydropower plants is optimally operated by simulating two cases: simultaneous optimization and individual optimization. ISMA is better than EO and SMA for the two cases, and the results of ISMA from the simultaneous optimization reach greater energy than individual optimization by 154.8 MW, equivalent to 4.11% of the individual optimization. For the whole system, ISMA can reach a greater total profit than EO and SMA over one operating day by USD 6007.5 and USD 650.5, equivalent to 0.12% and 0.013%. The results indicate that the optimization operation of cascaded hydropower plants and hybrid power systems can reach a huge benefit in electricity sales

Research on Low Voltage Ride-through Characteristics of 300 MW VSPSH Based on BPA

Abstract With the development of new energy, the power grid scale is constantly expanding, which also brings new challenges to the stability of the grid. When some faults occur in the power grid, it leads to a voltage dip; if most of the devices are removed from the power system, it is easy to cause problems of stability and losses. Therefore, it is necessary to investigate the low voltage ride-through (LVRT) characteristics of power electronic equipment with large capacity before grid connection. Different from constant-speed pumped-storage hydropower plants (CSPSH), variable-speed pumped-storage hydropower (VSPSH) units have broad prospects for development in China due to their characteristics of frequency and voltage regulation, energy saving, and high efficiency. In this paper, the three-machine-nine-node model of 300 MW VSPSH is built based on BPA, and the large voltage dip caused by a three-phase short-circuit fault at the grid side is designed to test the LVRT capability of 300 MW doubly fed VSPSH.

Uncertainty Estimation in the Modeling of a Flood Wave Caused by a Dam Failure in a Hydropower System with Pumped Hydro Energy Storage

Future global sustainability depends heavily on the development of renewable energy. The object of this study is a system of two plants (Kaunas hydropower plant (HP) and Kruonis pumped-storage hydropower plant) and upper and lower reservoirs. A possible dam failure accident in such an important system can endanger the population of Kaunas City. The methodology for estimating dam-failure-induced flood wave uncertainty included scenarios of the upper reservoir embankment failure hydrographs, modeling flood wave spreading (MIKE 21 hydrodynamic model), and estimating wave heights. The GRS methodology was selected to assess the uncertainty of flood wave modeling results and the sensitivity of hydrodynamic model parameters. The findings revealed that the discharge values of the Nemunas inflow and outflow through the HP outlets are the most important parameters determining the greatest height of the flood wave. Therefore, by correctly managing the amount of water in the upper reservoir, it would be possible to prevent the lower reservoir dam from breaking.

Loss of load probability for power systems based on renewable sources

An increasing number of small and variable power sources, such as wind and solar power plants, are being integrated into power systems, potentially affecting their reliability. This study was aimed at developing a method for evaluating reliability in terms of the loss of load probability. To this end, an algorithm capable of assessing the expanded role of renewable sources in the power system was established, which could take into account the specific roles and features of wind, solar, and hydro power plants, including pumped storage hydro power plants. Various models were developed and tested to closely emulate real power system behavior. A regional power system was evaluated over multiple years. The results indicated that the reliability of power systems fluctuates with the available capacity of renewable resources. These findings provide a foundation for a more precise specification of power reserves in such systems to prevent excessive reduction in reliability.

Nuclear and Hydrotechnical Expertise Combined: Gidroproekt and the South Ukraine Energy Complex

This article investigates the juncture of hydropower and nuclear engineering traditions at the South Ukraine Energy Complex in the USSR from the late 1960s onwards. Engineers from the hydrotechnical design institute Gidroproekt played a key role in the envisioning, planning and realisation of this unique project. It combined a nuclear power plant and its cooling water reservoir with a pumped-storage hydropower plant and an accompanying run-of-river hydropower plant, allowing for potential synergies with irrigation and pisciculture. A mixture of hydraulic and nuclear technocratic traditions manifested itself in a large-scale attempt to change the natural environment as proof of Soviet technological superiority.

A Score-Based Evaluation Model for Rehabilitation of Existing Pumped Storage Hydropower Plant Construction

As the proportion of new and renewable energy increases, power control demands are becoming more frequent due to variability in power generation. As a complementary means against this, the pumped storage hydropower plants (PSHP) are attracting attention as energy storage systems (ESS), but it has high construction costs. Therefore, this study aims to improve the economic feasibility by developing the evaluation model of the existing infrastructure into an upper/lower dam suitable for PSHP. The concept of upper dam capacity is newly defined, and the evaluation index is constructed using normalization. A new evaluation system is presented for five factors: environment, stability, energy, capacity, and economy. Finally, it is tested in the pilot area in Korea. Several candidates, including the PSHP in operation, are found to have been distributed with higher scores. These results will help to satisfy the selection of candidates during the preliminary feasibility study phase, and programming them will enable more accurate and rapid assessment.

Minimize Total Cost and Maximize Total Profit for Power Systems with Pumped Storage Hydro and Renewable Power Plants Using Improved Self-Organizing Migration Algorithm

This study presents the application of an improved self-organizing migration algorithm (ISOMA) for minimizing the total electricity production expenditure (TEPE) and maximizing the total electricity sale profit (TPRF) for hydrothermal power systems (HTPS) without and with renewable energies. Two power system configurations were employed to test the real efficiency of ISOMA while dealing with two objective functions. In the first configuration, there was one thermal power plant and one hydropower plant, while in the second configuration, wind and solar energy were both connected to the first system. The results achieved in the first configuration with the first objective function indicated that ISOMA not only outperformed SOMA according to all comparison criteria but was also superior to other methods such as evolutionary programming (EP), acceleration factor-based particle swarm optimization (AFPSO), and accelerated particle swarm optimization (APSO). The evaluation of the results achieved by ISOMA in the second configuration with the objective function of maximizing the TPRF revealed that ISOMA could reach better profits than SOMA in terms of maximum, mean and minimum TPRF values over fifty trial runs. As a result, it was concluded that pumped storage hydropower plants are very useful in integrating with renewable power plants to cut total cost for thermal power plants and in reaching the highest profit for the whole system. Also, ISOMA is a suitable algorithm for the considered problem.

Stability analysis of pumped storage hydropower plant in abandoned open-pit mine affected by dynamic surface subsidence of combined mining.

The construction of a pumped storage hydropower plant (PSHP) in an abandoned open-pit mine is a potential alternative to green mining and energy storage, which can increase the utilization rate of renewable energy and develop residual resources of abandoned mines. Dynamic surface subsidence affected by combined underground and open-pit mining (CUOPM) seriously affects the construction and operation of the PSHP and is one of the critical scientific issues that needs to be solved immediately. The stability of the PSHP was analyzed and treatment scheme of the goafs was proposed based on on-site measurement, theoretical analysis, and numerical simulation. First, the distribution of goafs in the Haizhou open-pit mining area was investigated and surface subsidence value was obtained using InSAR technology and ground monitoring. Secondly, the surface subsidence mechanism affected by CUOPM is analyzed and indicates the subsidence maximum values and scope of influence are greater than those of single underground mining. A dynamic surface subsidence prediction model for combined mining is established based on the Knothe time function model. Thirdly, based on the CVISC model, the numerical calculation models were established by using FLAC3D, and the characteristics and laws of surface subsidence in different periods of CUOPM were studied. The comparative analysis of the observation results shows that the proposed model and numerical simulation calculation method have excellent applicability and accuracy. Finally, a stability evaluation method of PSHP was established, and the results of the evaluation show that the affected areas are the semi-ground powerhouse (SGPH) and the west side of the lower reservoir. The method of grouting filling was used to treat the goafs, and the results showed that it effectively alleviates the dynamic surface subsidence affected by CUOPM, and provides a safety guarantee for PSHP.

Open pit limit optimization considering the pumped storage benefit after mine closure: a case study

Repurposing a closed mine as lower reservoir is a cost-effective way for the construction of pumped storage hydropower (PSH) plant. This method can eliminate the expenses of mine reclamation, reservoir construction, and land acquisition, resulting in significant cost savings and benefits for the PSH project, known as the PSH benefit. The construction of PSH plants within a closed mine is divided into surface mode and semi-underground mode in this paper. Through a general comparison of two in-situ cases, the finding highlight that the surface mode can achieve a larger potential installed capacity and lower construction cost. Furthermore, the PSH benefit is quantified and internalized as an economic parameter in the ultimate pit limit (UPL) optimization by allocating it into unit ore. Taken an undisclosed open-pit iron mine as example, the UPL is optimized by considering the PSH benefit. The internalized PSH benefit is calculated to be 6.59 CN¥/t when the installed capacity is 2000 MW, and ore amount within the optimized UPL is increased by 1.4%. The results indicated that the PSH benefit does influence the shape and size of UPL, but not significantly. Besides, converting several bottoms in a single open-pit into lower and upper reservoirs presents more challenges for UPL optimization, which further explorations is needed.

Optimal Short-Term Dispatch of Pumped-Storage Hydropower Plants Including Hydraulic Short Circuit

Optimal Short-Term Dispatch of Pumped-Storage Hydropower Plants Including Hydraulic Short Circuit

Stochastic optimal scheduling of wind power and pumped-storage hydropower complementary systems with multiple uncertainties

The joint operation of wind farms (WFs) and pumped-storage hydropower plants (PSHPs) is an effective way to smooth out the random fluctuations of wind power and improve its consumption rate. In this paper, a novel method to describe the multiple uncertainties of wind power outputs is proposed. A WFs-PSHP joint optimal scheduling model based on chance-constrained programming is then developed. The optimization model aims to maximize the total generation profit of the WFs-PSHP complementary system, and comprehensively considers the hydraulic constraints, unit operation constraints and system power balance constraint of the PSHP. To improve the model solving efficiency, this study converts the previous model with high-dimensional, non-convex, nonlinear and stochastic characteristics to the deterministic mixed integer linear programming (MILP) one. The optimization results demonstrate that the PSHP not only compensates for the fluctuations in wind power output, but also increases the total generation profit of this complementary system to 966.48 × 104 CNY, which is 17.56 % higher than that of independent operation.

FED evaluation in a small double-suction reversible pump turbine considering sediment erosion

Double-suction pump-turbines are a special type of reversible pump-turbine which serves the pumped storage hydro power plant. Enhancing the energy conversion efficiency of the power station can be effectively achieved by reducing the internal Flow Energy Dissipation (FED) within the pump-turbine. The key to addressing this challenge lies in the identification of high FED regions and conducting visualized analyses. In this study, computational fluid dynamics (CFD), thermodynamic calculation methods and the Finnie erosion model are combined to perform two-phase flow numerical simulations of a specific double-suction pump-turbine model under both pump and turbine operating modes. We analyzed the FED in different regions off wall. The energy loss distribution is provided within these five regions for the volute casing, suction chamber, and impeller separately, and conducted an analysis of component wear. The research findings revealed that, in the pump mode, FED primarily concentrates within the volute casing, while in the turbine mode, it is concentrated within the suction chamber, with both regions accounting for over 70 % of the total energy dissipation. The proportion of internal FED in five regions at varying distances from the wall for each component showed significant disparities under different operating conditions, closely related to the internal flow characteristics of the components. In pump mode, wear primarily occurs in the volute casing, while the wear in the suction chamber and impeller can be considered negligible. In turbine mode, each component experiences some level of wear. This provides a foundation for reducing flow energy losses and preventing sediment erosion.

Increasing Demand Covered by Renewable Energy in El Hierro Island

The power system of the El Hierro island comprises a wind farm, a pumped storage hydropower plant and a diesel power plant. Its operational history shows that the renewable energy participation in the energy mix is approximately 50%. In order to increase this participation, the installation of residential photovoltaic generation and battery storage has been considered. In this paper, the operation of the whole system is analyzed by simulation. Simulations consider historical data of electric supply and demand in addition to meteorological data to obtain the wind and solar power production. The simulation tool has been tuned to successfully reproduce past system performance. From the simulations, the effect of adding new renewable generation and storage has been assessed. Also, the effect of a different operation strategy has been analyzed. From the results of these simulations, adding batteries has a negligible effect in increasing renewable energy participation. By contrast, adding solar power provides an increase in renewable energy participation. However, eliminating the requirement of 50% of synchronous generation has the largest effect on increasing renewable energy participation in the energy mix.

Optimal scheduling of pumped storage hydropower plants with multi-type of units in day-ahead electricity market considering water head effects

Optimal scheduling of pumped storage hydropower plants with multi-type of units in day-ahead electricity market considering water head effects

Complementary scheduling rules for hybrid pumped storage hydropower-photovoltaic power system reconstructing from conventional cascade hydropower stations

The reconstruction of conventional cascade hydropower plants (CHP) into hybrid pumped storage hydropower plants (HPSH) by adding a pumping station has the potential to increase the hydropower's flexibility and promote the consumption of renewable energy into the power grid. However, the complex hydraulic and electric connections between cascade hydropower stations and multi-energy sources pose challenges to safe and economic operation. This study explores the complementary scheduling for hybrid pumped storage hydropower-photovoltaic (HPSH-PV) system and evaluates the operation benefit and risk. First, the complementary scheduling rules that consider the demand for long-distance and across-regions power transmission are proposed to guide the peak-shaving operation of the system. Then a case study is performed with a hydro-PV complementary project in China, and the benefit and risks are evaluated quantitatively while considering the uncertainty of PV power prediction. The results demonstrate that after a pumping station is added (1) the power generation profit can be increased, especially in the dry seasons and the upstream reservoir; (2) the regulation capacity and power-supply reliability of the upstream reservoir is increased, while that of the downstream reservoir is slightly reduced; (3) the reservoir water level fluctuation and operation risk increase, but it can be lowered as the inflow increases.

Challenges of Large Converter-Fed Synchronous Machines for Variable-Speed Pumped Hydro Storage

The green energy transition of electrical energy production is leading to an increasing share of total energy production for volatile renewable energy sources, mainly wind and solar power. To handle this volatile production, flexible and efficient energy storage is required. The development of high-power converters has enabled the generation of variable-speed pumped hydro storage power plants, combining the so-far-unequalled energy storage capacity of classical pumped-storage hydro power plants and the recently increased operation requirements. The introduction of large-scale converters has led to new challenges in the overall design of power plant systems. This paper intended to take a closer look at a large-scale converter-fed synchronous generator, especially the distribution of the current and voltage harmonics caused by the converter in the implemented generation system. Thereby, holistic design considerations for an ideal loss distribution as well as possible measures to limit the effects of harmonic coupling at the generator shaft and bearings are discussed. Furthermore, basic considerations of harmonic emission to the connected network are described. These topics are addressed by analyzing on-site measurements at an 85 MVA converter-fed synchronous generator with a voltage source inverter, underpinned with the theoretical background.

Valuing the social cost of carbon: Do economists really care about climate change?

The aim of the article is to analyse the scientific literature of the last decade on the social cost of carbon to identify and discuss the best values representing the external cost of CO2 emis-sions calculated with a damage valuation approach, to use in cost-benefit analysis and in other external costs applications, such as Life Cycle Assessment. The social cost of carbon repre-sents the present value of the global damages of climate change attributable to the emission of an additional ton of carbon dioxide into the atmosphere. The measurement of the social cost of carbon is fundamental in the transition to a net zero emissions economy because it allows bal-ancing the costs of investments needed for decarbonization with their benefits in terms of avoided climate damages. The paper develops and applies a method for identifying the best social cost of carbon estimates, that starts from study reviews conducted within institutional processes (IPCC, OECD, US Government bodies), to then analyse the study reviews made in academic or research contexts and only in the end it delves into selected academic studies that provide original estimates of the social cost of carbon. The method allowed to identify and dis-cuss a robust even if conservative estimate of the social cost of carbon for emissions in the period 2020-2080, recently elaborated by the US Environmental Protection Agency, that can be used worldwide, for example to update the reference external cost values for CO2 emis-sions recommended by the European Commission Handbook on external cost of transport.

Bidding strategy of storage hydropower plants in reserve markets

The increasing share of intermittent sources of energy will increase the need for frequency-control reserves. However, the supply from gas and coal-fired power plants might decrease in the following years. Being the procurement of reserves mostly market-based in Europe, the market design should send price signals to encourage participation in these markets. This pa-per analyses the incentives provided by the French market design for seasonal storage and pumped storage hydropower plants to participate in reserve markets. To that end, a determinis-tic mixed-integer linear optimization model is presented. The objective is to maximize profits in the energy and reserve markets according to 2019 market prices. By optimising the trade-offs between the day-ahead and the reserve markets, the storage hydropower plant increase its profits. The pumped storage hydropower plant sometimes chooses the Frequency Contain-ment Reserve market or the day-ahead market only. The apparition of some hours of FCR par-ticipation with the pumped storage plant is explained by its higher number of generating hours and by the higher volatility of reserve energy prices. These two factors also explain the greater response of the pumped storage plant to the incentive measures on the FCR market.