Pulsed CO2 Research Articles

Molecular level insights on the pulsed electrochemical CO2 reduction.

Electrochemical CO2 reduction reaction (CO2RR) occurring at the electrode/electrolyte interface is sensitive to both the potential and concentration polarization. Compared to static electrolysis at a fixed potential, pulsed electrolysis with alternating anodic and cathodic potentials is an intriguing approach that not only reconstructs the surface structure, but also regulates the local pH and mass transport from the electrolyte side in the immediate vicinity of the cathode. Herein, via a combined online mass spectrometry investigation with sub-second temporal resolution and 1-dimensional diffusion profile simulations, we reveal that heightened surface CO2 concentration promotes CO2RR over H2 evolution for both polycrystalline Ag and Cu electrodes after anodic pulses. Moreover, mild oxidative pulses generate a roughened surface topology with under-coordinated Ag or Cu sites, delivering the best CO2-to-CO and CO2-to-C2+ performance, respectively. Surface-enhanced infrared absorption spectroscopy elucidates the potential dependence of *CO and *OCHO species on Ag as well as the gradually improved *CO consumption rate over under-coordinated Cu after oxidative pulses, directly correlating apparent CO2RR selectivity with dynamic interfacial chemistry at the molecular level.

Investigation of material ejection in laser decal transfer-based µ-3D printing of ZnO ceramics with microsecond pulsed CO2 laser

Investigation of material ejection in laser decal transfer-based µ-3D printing of ZnO ceramics with microsecond pulsed CO2 laser

Optimization of efficiency of short-pulsed fast flow CO2 laser amplifier with dual-band and multispectral lines

In this paper, we optimize the amplification efficiency of a nanosecond pulse CO2 laser in a fast flow amplifier using dual-band and multispectral lines techniques. Utilizing a six-temperature model and a random rotational relaxation model, we simulate the time-domain amplification process of dual-band and multispectral lines short-pulse seeds in a fast flow CO2 laser amplifier, analyzing the effects of input pulse fluence, pulse width, and spectral line composition on amplification efficiency. Compared to single-line 10P(20) amplification, the extraction efficiency of 10.6-µm and 9.6-µm dual-band two-line 15-ns pulses is improved by approximately 70%, surpassing that of 10.6-µm single-band four-line amplification. This study is of great significance for the efficient amplification of short-pulse CO2 lasers and the generation of extreme ultraviolet light from laser produced plasma.

Respiratory responses and isocapnic buffering phase in child and youth soccer players during an incremental exercise test.

This study investigated the respiratory response and isocapnic buffering (IB) phase during an incremental exercise test to exhaustion in 16 child soccer players (11.9±0.9 years) and 18 youth soccer players (18.2±2.9 years). The IB phase was calculated as the difference in oxygen uptake (VO2) between the respiratory compensation point (RCP) and metabolic threshold (MT) and expressed in either absolute or relative values. The maximal oxygen uptake (VO2max) was higher in youth players than in child players. For youth players, VO2max was measured at 55.9 ± 3.6mLmin-1kg-1 and 74.9 ± 4.8mLmin-1kg-0.75, while for child players, VO2max was 50.8 ± 4.1mLmin-1kg-1 and 67.2 ± 6.1mLmin-1kg-0.75 (p < 0.001). MT and RCP occurred at 69.8 ± 6.7% and 90.9 ± 6.9% of VO2max in child players and at 73.9 ± 5.1% and 91.5 ± 4.5% of VO2max in youth players, respectively. The two groups had no significant difference (p > 0.05). Absolute IB (10.6 ± 2.8 vs 9.7 ± 3.1mLmin-1kg-1), relative IB (23.1 ± 5.7 vs 19.1 ± 6.1), and the ratio of RCP VO2 to MT VO2 (1.3 ± 0.09 vs 1.24 ± 0.09) were similar in child and youth players (p > 0.05). There was no difference in minute ventilation (V̇E, mLmin-1kg-1) and respiratory exchange ratio during exercise between the two groups (p > 0.05). During exercise, respiratory frequency, ventilatory equivalent for carbon dioxide (VE/VCO2) and oxygen (VE/VO2), VE/VCO2 slope, end-tidal O2 pressure were higher in child players than in youth players, while tidal volume (L kg-1), O2 pulse, and end-tidal CO2 pressure were lower (p < 0.05). Despite differences in aerobic capacity and ventilatory response to exercise, child players showed similar IB phase as youth players. Although child players have lower ventilation efficiency than youth players, the higher ventilation response for a given VCO2 may provide an advantage in regulating acid-base balance during intense exercise.

Timing of Laser Intervention on Facial Scars: A 3D Imaging and Scar Scale Analysis in a Retrospective Study.

Scars resulting from injuries or surgical procedures often present both physical and aesthetic challenges. Recent studies have indicated promising results in improving postoperative scar outcomes through the combined use of specific laser technologies. Nevertheless, there remains a crucial need for further exploration to ascertain the optimal timing for initiating such treatments. In this retrospective investigation, a cohort of 47 adult patients who did not require hospitalization was analyzed. These patients were divided into two distinct groups: Group A, which received intervention beginning 2 weeks after their respective operations, and Group B, which commenced intervention 4 weeks postoperation. Each group underwent a comprehensive treatment protocol consisting of five laser sessions. Initially, patients underwent three sessions of V-beam pulsed-dye laser (PDL) therapy followed by two sessions of ablative fractional CO2 laser (AFL) therapy. Evaluation of outcomes was conducted using advanced imaging techniques such as Antera 3D imaging, in conjunction with established scar assessment tools including the Vancouver Scar Scale (VSS) and the University of North Carolina "4P" Scar Scale (UNC4P). All patients successfully completed the full course of five treatment sessions, with no dropouts and no reported adverse events. Baseline cosmetic assessments of scars were equivalent across both groups. In Group A, the mean VSS scores decreased from 7.04 before treatment to 5.29 at 3 months posttreatment and further to 4.33 at 6 months posttreatment. Meanwhile, in Group B, scores decreased from 7.52 to 6.83 at 3 months and 6.17 at 6 months. There were no statistically significant differences in baseline VSS scores between the two groups (p = 0.34). At both the 3- and 6-month follow-up points, mean VSS scores were significantly lower in Group A compared to Group B (p < 0.05). Similar trends were observed in UNC4P scores. Statistically significant differences were noted across all time points (baseline, 3 months, and 6 months posttreatment) for both VSS and UNC4P scores (p < 0.05). Subset analysis revealed greater improvements in texture and depression volume at 3 months posttreatment, while improvements in depression area, depth, elevation variation, and area were more pronounced at the 6-month mark. Early intervention using the combined 595-nm pulse dye laser and CO2 ablative fractional laser (AFL) 2- and 4-weeks post-surgery proves to be an effective and safe method for improving scar outcomes, particularly for facial surgical scars when treatment starts 2 weeks after surgery. However, further research is needed to refine our understanding and address potential study limitations.

Machine Learning Based Surface Finish Prediction and Optimization of Process Parameters in Pulsed CO2 Laser Cutting of Particle (TiC) Reinforced Al6061 Composite Using KNN &amp; ANN

Machine Learning Based Surface Finish Prediction and Optimization of Process Parameters in Pulsed CO2 Laser Cutting of Particle (TiC) Reinforced Al6061 Composite Using KNN &amp; ANN

Effects of “blue” (λ = 450 nm) and pulsed periodic CO2 (λ = 10.6 μm) laser light at the skin of laboratory animals. A comparative experimental study

Effects of “blue” (λ = 450 nm) and pulsed periodic CO2 (λ = 10.6 μm) laser light at the skin of laboratory animals. A comparative experimental study

Dynamic Cation Enrichment during Pulsed CO2 Electrolysis and the Cation-Promoted Multicarbon Formation.

Recently, pulsed electrolysis has been demonstrated as an emerging electrochemical technique that significantly promotes the performance of various electrocatalysis applications. The ionic nature of aqueous electrolytes implies a likely change in ionic distribution under these alternating potential conditions. However, despite the well-known importance of cations, the impact of pulsed electrolysis on the cation distribution remains unexplored as well as its influences on the performance. Herein, we explore the cation effects on the pulsed electrochemical CO2 reduction (p-CO2RR) using the most widely utilized alkali metal cations, including Li+, Na+, K+, and Cs+. It is discovered that the nature of cations can significantly influence the product ratio of C2+ over C1 (mostly CH4) during p-CO2RR in an order of Li+< Na+< K+< Cs+, much more profoundly than those of static cases. We report direct experimental evidence for the cation enrichment caused by pulsed electrolysis, depending on the radius of the hydrated ions. With further quasi-in situ analysis of the catalyst surface, the cation-promoted Cu dissolution-and-redeposition process was identified; this is found to alter the surface CuxO/Cu ratio during the pulsed process. We demonstrate that both the cation enrichment and the cation-adjusted surface CuxO/Cu composition impact the C2+/C1 ratio through the control of the surface-adsorbed CO population. These results reveal the presence of pulse-induced cation redistribution in emerging pulsed electrolysis techniques and provide a comprehensive understanding of alkali metal cation effects for improving the selectivity of p-CO2RR.

Dynamics of the Boundary Layer in Pulsed CO2 Electrolysis.

Electrochemical reduction of CO2 poses a vast potential to contribute to a defossilized industry. Despite tremendous developments within the field, mass transport limitations, carbonate salt formation, and electrode degradation mechanisms still hamper the process performance. One promising approach to tweak CO2 electrolysis beyond today's limitations is pulsed electrolysis with potential cycling between an operating and a regeneration mode. Here, we rigorously model the boundary layer at a silver electrode in pulsed operation to get profound insights into the dynamic reorganization of the electrode microenvironment. In our simulation, pulsed electrolysis leads to a significant improvement of up to six times higher CO current density and 20 times higher cathodic energy efficiency when pulsing between -1.85 and -1.05 V vs SHE compared to constant potential operation. We found that elevated reactant availability in pulsed electrolysis originates from alternating replenishment of CO2 by diffusion and not from pH-induced carbonate and bicarbonate conversion. Moreover, pulsed electrolysis substantially promotes carbonate removal from the electrode by up to 83 % compared to constant potential operation, thus reducing the risk of salt formation. Therefore, this model lays the groundwork for an accurate simulation of the dynamic boundary layer modulation, which can provide insights into manifold electrochemical conversions.

Elevated temperature rusting characteristics of UNS 31254 weldments within the operational confines of fossil fuel-fired plants and municipal waste incinerator surroundings at 700 °C

ABSTRACT This study investigates the air oxidation and rusting traits of fully austenitic alloy 254 stainless steel samples at 700°C after pulse current gas tungsten arc welding (PCGTA) and CO2 laser beam welding (CO2 LBW), with or without molten salt, relevant to coal-fired plants and waste incinerator settings. Among the weldments studied, CO2 laser weldments demonstrate greater resilience to corrosive gas and salt amalgamation, as well as air oxidation, compared to gas tungsten arc weldments, possibly due to thermal disparities and microstructural differences inherent in the welding processes. Protective oxides enhance corrosion resistance in air-oxidised samples, while corrosive compounds like CrS, Cr2K2O7, etc., reduce corrosion resistance and promote spallation in salt-degraded material. A thermogravimetric approach was used to assess rusting effects, alongside microstructural analysis employing optical, Scanning electron microscopy/ Energy dispersive x-ray spectroscopy (SEM/EDS), and X-Ray diffraction analysis (XRD) techniques.

Research on key factors of pulsed CO2 laser annealing of Ge core fiber

The germanium (Ge) core fiber with a core diameter of 29–32 μm and a cladding diameter of 158–162 μm was annealed by pulsed CO2 laser, exploring the key factors determining the properties of annealed Ge core fiber. The experimental results shown that the single pulse energy and the laser scanning speed are key factors of pulsed CO2 laser annealing of Ge core fibers. The reasons for experimental results were preliminarily analyzed from the perspectives of Ge atomic instantaneous kinetic energy and temperature field of Ge core during annealing. For different frequencies of laser annealing, optimal samples with similar properties can be obtained by adjusting the single pulse energy and laser scanning speed. For the samples annealed by 30 kHz, 50 kHz, 60 kHz, and 70 kHz lasers, the optimal Raman frequency average value is 301.191 cm−1, 301.107 cm−1, 301.153 cm−1, and 301.174 cm−1; the lowest propagation loss is 2.174 dB/cm, 2.596 dB/cm, 2.387 dB/cm, and 2.312 dB/cm respectively, which were measured using a quantum cascade laser with the wavelength range from 4.7 to 4.9 μm.

Influence of energy transfer processes on the rovibrational characteristics of CO2 in low-temperature conversion plasma with Ar and He admixture.

The influence of argon and helium on the rovibrational kinetics of carbon dioxide (CO2) and CO in low-temperature conversion plasma is investigated. With this objective, a combined experimental and computational study is conducted, applying quantum cascade laser infrared absorption spectroscopy to a pulsed DC CO2 glow discharge with varying noble gas admixture and modeling it with a two-term Boltzmann solver. Time-resolved rovibrational temperatures and dissociation fractions are presented, exhibiting an increase in rotational-vibrational non-equilibrium and an increasing CO2 conversion with argon (Ar) and helium (He) admixtures. Results are discussed in the context of energy transfer processes for collisions involving electrons, corroborated by electron-kinetic modeling, and heavy particle collisions. With noble gas addition, an increase in the electron number density, promoting excitation, and the high-energy tail of the electron energy distribution function are found. Penning ionization processes are proposed as an explanation for the increase in conversion, showing higher conversion for Ar due to the lower excitation thresholds and, therefore, larger state population. In the context of rovibrational kinetics, processes leading to the gain or loss of vibrational energy of CO2 are analyzed, pointing out subtle differences in, for example, relaxation rate coefficients between Ar and He. However, the cooling of the gas through conductive heat transfer is identified as the most important influence of the Ar and He admixture, as it keeps the relaxation rate for vibrational quenching low.

Efficient synthesis of CO and H2O2 via nanosecond pulsed CO2 bubble discharge

In the context of escalating global efforts to mitigate carbon emissions and explore sustainable energy resources, the transformation of CO2 into valuable chemicals and fuels via plasma technology has garnered significant attention. This study demonstrated a new pathway of CO2 conversion into CO and H2O2 via the bubble-enabled gas-liquid discharge driven by a nanosecond pulse. Results showed that the increased discharge frequency and larger pulse widths could enhance CO2 conversion rates and H2O2 yields, albeit potentially at the cost of reduced energy efficiency. Conversely, the rising time of pulse showed negligible impact on the process, whereas varying gas flow rates significantly altered CO and H2O2 yields, underscoring the nuanced influence of these parameters on the efficiency and selectivity of conversion processes. Through illuminating the dynamics of bubble discharge-assisted CO2 transformation, this study contributes to the broader understanding of gas-liquid discharge driven by nanosecond pulse, underlining its potential for addressing environmental and energy challenges.

Operando Raman spectroscopy uncovers hydroxide and CO species enhance ethanol selectivity during pulsed CO2 electroreduction

Pulsed CO2 electroreduction (CO2RR) has recently emerged as a facile way to in situ tune the product selectivity, in particular toward ethanol, without re-designing the catalytic system. However, in-depth mechanistic understanding requires comprehensive operando time-resolved studies to identify the kinetics and dynamics of the electrocatalytic interface. Here, we track the adsorbates and the catalyst state of pre-reduced Cu2O nanocubes ( ~ 30 nm) during pulsed CO2RR using sub-second time-resolved operando Raman spectroscopy. By screening a variety of product-steering pulse length conditions, we unravel the critical role of co-adsorbed OH and CO on the Cu surface next to the oxidative formation of Cu-Oad or CuOx/(OH)y species, impacting the kinetics of CO adsorption and boosting the ethanol selectivity. However, a too low OHad coverage following the formation of bulk-like Cu2O induces a significant increase in the C1 selectivity, while a too high OHad coverage poisons the surface for C-C coupling. Thus, we unveil the importance of co-adsorbed OH on the alcohol formation under CO2RR conditions and thereby, pave the way for improved catalyst design and operating conditions.

The effect of biomimetic laser surface treatment on the wear performance of high manganese steel

High manganese steel finds widespread applications in diverse friction and wear environments. The poor wear resistance of high manganese steel at low stress levels has prompted researchers globally to focus on studying its wear performance. Drawing inspiration from the protective features of pangolin scales, this study employed a pulsed radiation mode CO2 laser to conduct biomimetic laser surface treatment (BLST) on Mn13 high manganese steel. The BLST generated a biomimetic surface morphology consisting of tiny scales on the high manganese steel specimens. Subsequently, the biomimetic laser surface-treated (BLSTed) specimens underwent tests for surface morphology, microstructure, microhardness, and surface roughness. These tests employed metallographic microscopy, scanning electron microscopy, a microhardness tester, and a surface profilometer, respectively. A ring block friction and wear testing machine was utilized to evaluate the wear performance of the BLSTed specimens. Changes in laser power, laser frequency, and laser scanning velocity were found to alter the surface morphology of BLSTed specimens. The experimental results revealed that the microstructure of the BLSTed specimen surface comprised needle-like martensite. The increment in surface hardness and surface roughness of BLSTed specimens contributed to an elevation in their average friction coefficient. Furthermore, the surface hardness and wear performance of BLSTed specimens exhibited varying degrees of improvement with the increase in laser power, laser frequency, and laser scanning velocity. The tiny biomimetic scales, created through BLST, provided protection to high manganese steel akin to the protective scales on the body of pangolins. Finally, the study unveiled the wear resistance mechanism of BLSTed specimens.

Evolution mechanism of subsurface damage during laser machining process of fused silica

The machining-induced subsurface damage (SSD) on fused silica optics would incur damage when irradiated by intense lasers, which severely restricts the service life of fused silica optics. The high absorption of fused silica to 10.6 µm makes it possible to utilize pulsed CO2 laser to remove and characterize SSD by layer-by-layer ablation, which improves its laser-induced damage threshold. However, thermal stress during the laser ablation process may have an impact on SSD, leading to extension. Still, the law of SSD morphology evolution mechanism has not been clearly revealed. In this work, a multi-physics simulated model considering light field modulation is established to reveal the evolution law of radial SSD during the laser layer-by-layer ablation process. Based on the simulation of different characteristic structural parameters, two evolution mechanisms of radial SSD are revealed, and the influence of characteristic structural parameters on SSD is also elaborated. By prefabricating the SSD by femtosecond laser, the measurements of SSD during CO2 laser layer-by-layer ablation experiments are consistent with the simulated results, and three stages of SSD depth variation under two evolution processes are further proposed. The findings of this study provide theoretical guidance for effectively characterizing SSD based on laser layer-by-layer ablation strategies on fused silica optics.

Thermally Induced Structure and Functionality Evolution of a Pt‐based Lean NOx Trap Catalyst

Applying a NOx trap catalyst to effectively remove NOx contaminants from the oxygen‐rich exhaust is still very challenging, due to the lack of use guidance based on deactivation mechanisms. The temperature‐dependent Pt sintering rate constant was described using Pt dispersion determined by pulse CO chemisorption. It was found that 700‐850 ºC was the determining temperature regions for the significant Pt sintering, according to the sintering kinetics and the evolution of active Ptδ+ sites. The weak basicity plays a critical role in trapping NOx at low‐temperature (≤ 300 ºC), and the NOx trap efficiency decreases because of the loss of catalytic activity and medium basicity caused by forming BaAl2O4 phase. The reduction of NOx towards N2 on the Pt crystallites smaller than 18 nm is structure sensitive and decreases with losing the reducibility of catalysts. The security for long‐time use of a NOx trap catalyst should be exposed to the exhaust gas within 750 ºC, and effectively removing NOx contaminants requires it to be worked in the 350‐500 ºC regions. These findings can guide engineers and applied chemists how to efficiently use a NOx trap catalyst in the automotive exhaust purification system.

Optimization of some input parameters of a pulsed TEA CO2 laser based on the generalized Landau-Teller equations

Optimization of some input parameters of a pulsed TEA CO2 laser based on the generalized Landau-Teller equations

Pulsed CO2 Laser Pumped by a Longitudinal Discharge in an Alternating Magnetic Field

Pulsed CO2 Laser Pumped by a Longitudinal Discharge in an Alternating Magnetic Field

Time-resolved operando insights into the tunable selectivity of Cu–Zn nanocubes during pulsed CO2 electroreduction

Electrochemical CO2 reduction using CuZn nanocubes boosted ethanol selectivity when pulsed in the oxidation regime of zinc, while time-resolved operando techniques uncovered the key roles of dynamic zinc oxide formation and hydroxide coverage.