Pulsed CO2 Laser Research Articles

Investigation of material ejection in laser decal transfer-based µ-3D printing of ZnO ceramics with microsecond pulsed CO2 laser

Investigation of material ejection in laser decal transfer-based µ-3D printing of ZnO ceramics with microsecond pulsed CO2 laser

Optimization of efficiency of short-pulsed fast flow CO2 laser amplifier with dual-band and multispectral lines

In this paper, we optimize the amplification efficiency of a nanosecond pulse CO2 laser in a fast flow amplifier using dual-band and multispectral lines techniques. Utilizing a six-temperature model and a random rotational relaxation model, we simulate the time-domain amplification process of dual-band and multispectral lines short-pulse seeds in a fast flow CO2 laser amplifier, analyzing the effects of input pulse fluence, pulse width, and spectral line composition on amplification efficiency. Compared to single-line 10P(20) amplification, the extraction efficiency of 10.6-µm and 9.6-µm dual-band two-line 15-ns pulses is improved by approximately 70%, surpassing that of 10.6-µm single-band four-line amplification. This study is of great significance for the efficient amplification of short-pulse CO2 lasers and the generation of extreme ultraviolet light from laser produced plasma.

Machine Learning Based Surface Finish Prediction and Optimization of Process Parameters in Pulsed CO2 Laser Cutting of Particle (TiC) Reinforced Al6061 Composite Using KNN & ANN

Machine Learning Based Surface Finish Prediction and Optimization of Process Parameters in Pulsed CO2 Laser Cutting of Particle (TiC) Reinforced Al6061 Composite Using KNN & ANN

Effects of “blue” (λ = 450 nm) and pulsed periodic CO2 (λ = 10.6 μm) laser light at the skin of laboratory animals. A comparative experimental study

Effects of “blue” (λ = 450 nm) and pulsed periodic CO2 (λ = 10.6 μm) laser light at the skin of laboratory animals. A comparative experimental study

Elevated temperature rusting characteristics of UNS 31254 weldments within the operational confines of fossil fuel-fired plants and municipal waste incinerator surroundings at 700 °C

ABSTRACT This study investigates the air oxidation and rusting traits of fully austenitic alloy 254 stainless steel samples at 700°C after pulse current gas tungsten arc welding (PCGTA) and CO2 laser beam welding (CO2 LBW), with or without molten salt, relevant to coal-fired plants and waste incinerator settings. Among the weldments studied, CO2 laser weldments demonstrate greater resilience to corrosive gas and salt amalgamation, as well as air oxidation, compared to gas tungsten arc weldments, possibly due to thermal disparities and microstructural differences inherent in the welding processes. Protective oxides enhance corrosion resistance in air-oxidised samples, while corrosive compounds like CrS, Cr2K2O7, etc., reduce corrosion resistance and promote spallation in salt-degraded material. A thermogravimetric approach was used to assess rusting effects, alongside microstructural analysis employing optical, Scanning electron microscopy/ Energy dispersive x-ray spectroscopy (SEM/EDS), and X-Ray diffraction analysis (XRD) techniques.

Research on key factors of pulsed CO2 laser annealing of Ge core fiber

The germanium (Ge) core fiber with a core diameter of 29–32 μm and a cladding diameter of 158–162 μm was annealed by pulsed CO2 laser, exploring the key factors determining the properties of annealed Ge core fiber. The experimental results shown that the single pulse energy and the laser scanning speed are key factors of pulsed CO2 laser annealing of Ge core fibers. The reasons for experimental results were preliminarily analyzed from the perspectives of Ge atomic instantaneous kinetic energy and temperature field of Ge core during annealing. For different frequencies of laser annealing, optimal samples with similar properties can be obtained by adjusting the single pulse energy and laser scanning speed. For the samples annealed by 30 kHz, 50 kHz, 60 kHz, and 70 kHz lasers, the optimal Raman frequency average value is 301.191 cm−1, 301.107 cm−1, 301.153 cm−1, and 301.174 cm−1; the lowest propagation loss is 2.174 dB/cm, 2.596 dB/cm, 2.387 dB/cm, and 2.312 dB/cm respectively, which were measured using a quantum cascade laser with the wavelength range from 4.7 to 4.9 μm.

Altering CO2 Laser Pulse Energy Settings Did Not Influence Differential Gene Transcription in Normal Skin in a Red DurocPig Model.

Fractional ablative CO2 lasers are used clinically to treat cutaneous burn scars with reported varying degrees of effectiveness. It was hypothesized that different laser pulse energy settings may lead to differential gene transcription in a porcine model. Uninjured skin from red Duroc pigs was treated with a fractional ablative CO2 laser set to 70, 100, or 120 mJ across the abdomen (n = 4 areas per treatment). Punch biopsies of both treated and untreated sites were taken before treatment (baseline), at 30 min, and at each hour for 6 h and stored in All-Protect tissue reagent. The biopsies were then used to isolate RNA, which was subsequently used in qRT-PCR for eight genes associated with wound healing and the extracellular matrix: CCL2, IL6, FGF2, TIMP1, TIMP3, COL1A2, MMP2, andDCN. RPL13a was used as a housekeeping gene to normalize the eightgenes of interest. One-way ANOVA tests were used to assess for differences among laser pulse energies and two-way ANOVA tests were used to assess the differences between treated and untreated areas. While six of the eight genes were upregulated after treatment (p < 0.05), there were no significant differences in gene expression between the different laser pulse energies for any of the eight genes. While laser treatment is correlated with a positive and significant upregulation for six of the eight genes 4 h after intervention, the pulse energy settings of the laser did not lead to a statistically significant difference in gene transcription among the treatment areas. Different laser pulse energies may not be required to induce similar cellular responses in a clinical setting.

88‐2: The Characteristics Analysis for Laser Cutting Process of Multilayers Display Panels

In this study, we analyzed the laser cutting characteristics of pulse transverse electrical discharge in gas at atmospheric pressure (TEA) CO2 and ultraviolet (UV) pulse laser processing in a multilayer display panels. First, the numerical calculation for was performed to confirm the thermal characteristics of each materials and optical field distribution at the interface of different material layers. Also, processing characteristics were experimentally confirmed by measuring cutting profile and adhesion characteristics of layer interface. Experimental results show that the characteristics of multi layers polymer cutting have different trend from those in a single‐layer because of the optical and thermal properties of each layer. In particular, the interface of layers had a substantial affect due to optical field distributions and thermal characteristic difference. Also, the optical absorbance of layers affect adhesion at the interface. The result suggests proper processing condition to enhance the laser ablation processing quality of multilayer display panel. In conclusion, understanding the characteristics of multilayer laser cutting processing is important for determining the optimal conditions for display panel micromachining and enhancing the quality of laser cutting for the cutting edge technology.

The effect of biomimetic laser surface treatment on the wear performance of high manganese steel

High manganese steel finds widespread applications in diverse friction and wear environments. The poor wear resistance of high manganese steel at low stress levels has prompted researchers globally to focus on studying its wear performance. Drawing inspiration from the protective features of pangolin scales, this study employed a pulsed radiation mode CO2 laser to conduct biomimetic laser surface treatment (BLST) on Mn13 high manganese steel. The BLST generated a biomimetic surface morphology consisting of tiny scales on the high manganese steel specimens. Subsequently, the biomimetic laser surface-treated (BLSTed) specimens underwent tests for surface morphology, microstructure, microhardness, and surface roughness. These tests employed metallographic microscopy, scanning electron microscopy, a microhardness tester, and a surface profilometer, respectively. A ring block friction and wear testing machine was utilized to evaluate the wear performance of the BLSTed specimens. Changes in laser power, laser frequency, and laser scanning velocity were found to alter the surface morphology of BLSTed specimens. The experimental results revealed that the microstructure of the BLSTed specimen surface comprised needle-like martensite. The increment in surface hardness and surface roughness of BLSTed specimens contributed to an elevation in their average friction coefficient. Furthermore, the surface hardness and wear performance of BLSTed specimens exhibited varying degrees of improvement with the increase in laser power, laser frequency, and laser scanning velocity. The tiny biomimetic scales, created through BLST, provided protection to high manganese steel akin to the protective scales on the body of pangolins. Finally, the study unveiled the wear resistance mechanism of BLSTed specimens.

Evolution mechanism of subsurface damage during laser machining process of fused silica

The machining-induced subsurface damage (SSD) on fused silica optics would incur damage when irradiated by intense lasers, which severely restricts the service life of fused silica optics. The high absorption of fused silica to 10.6 µm makes it possible to utilize pulsed CO2 laser to remove and characterize SSD by layer-by-layer ablation, which improves its laser-induced damage threshold. However, thermal stress during the laser ablation process may have an impact on SSD, leading to extension. Still, the law of SSD morphology evolution mechanism has not been clearly revealed. In this work, a multi-physics simulated model considering light field modulation is established to reveal the evolution law of radial SSD during the laser layer-by-layer ablation process. Based on the simulation of different characteristic structural parameters, two evolution mechanisms of radial SSD are revealed, and the influence of characteristic structural parameters on SSD is also elaborated. By prefabricating the SSD by femtosecond laser, the measurements of SSD during CO2 laser layer-by-layer ablation experiments are consistent with the simulated results, and three stages of SSD depth variation under two evolution processes are further proposed. The findings of this study provide theoretical guidance for effectively characterizing SSD based on laser layer-by-layer ablation strategies on fused silica optics.

Terawatt-class femtosecond long-wave infrared laser

We utilized a nonlinear post-compression technique to generate 675-fs, 9.2-μm CO2 laser pulses with a peak power of 1.6 TW. This achievement represents the highest peak power ever attained in the femtosecond pulse format within the long-wave infrared (LWIR) spectral range. The successful implementation of this post-compression technique opens avenues for the development of few-cycle, multi-terawatt 9–10 μm lasers, crucial for applications currently relying on near-infrared solid-state lasers, and which stand to benefit from the scaling of laser wavelengths into the long-wave infrared region.

Stress wave in the mesoscopic discontinuous medium by fractional approach

A fractional approach based on the generalized Taylor's formula is proposed to describe the dynamic responses in the meso-discontinuous medium (e.g., oyster shell). The governing equations with the Caputo-defined fractional derivatives in space are derived. In order to describe the dynamic effect of geometric structures in the meso- discontinuous medium, the finite element method (FEM) is employed together with the fractional governing equations to establish the relation of the equivalent fractional order (α¯) with the fractal dimension (D), and the linear relation is obtained as: α¯=0.99D−0.97. The results also show that the equivalent effects of porous structure on wave propagation could be determined by fractal dimension and fractional order. The CO2 pulse laser together with VISAR measurement is then employed to investigate the dynamic responses in the oyster shell specimens. The evaluated equivalent fractional order decreases with increasing of the density, and the equivalent fractional orders (α¯) of pure nacre and pure chalk are estimated to be respectively 0.61 and 0.69, while the estimated α¯ of pure nacre and pure chalk by FEM are 0.63 and 0.79. The difference of estimated α¯(0.79) with actual α¯(0.69) of chalk is due to the irregular interface, which would cause greater wave attenuation. Due to the stronger and much more meso-discontinuous interfaces (i.e., the brick-mud structures) in the nacre, wave amplitude decays more seriously in the nacre (denser with higher density) than those in the chalk (looser with lower density), and measured velocities decrease with increasing of the density. This work provided a new approach to investigate the dynamic mechanical properties of meso-discontinuous mediums.

Dazzling Evaluation of the Impact of a High-Repetition-Rate CO2 Pulsed Laser on Infrared Imaging Systems.

This article utilizes the Canny edge extraction algorithm based on contour curvature and the cross-correlation template matching algorithm to extensively study the impact of a high-repetition-rate CO2 pulsed laser on the target extraction and tracking performance of an infrared imaging detector. It establishes a quantified dazzling pattern for lasers on infrared imaging systems. By conducting laser dazzling and damage experiments, a detailed analysis of the normalized correlation between the target and the dazzling images is performed to quantitatively describe the laser dazzling effects. Simultaneously, an evaluation system, including target distance and laser power evaluation factors, is established to determine the dazzling level and whether the target is recognizable. The research results reveal that the laser power and target position are crucial factors affecting the detection performance of infrared imaging detector systems under laser dazzling. Different laser powers are required to successfully interfere with the recognition algorithm of the infrared imaging detector at different distances. And laser dazzling produces a considerable quantity of false edge information, which seriously affects the performance of the pattern recognition algorithm. In laser damage experiments, the detector experienced functional damage, with a quarter of the image displaying as completely black. The energy density threshold required for the functional damage of the detector is approximately 3 J/cm2. The dazzling assessment conclusions also apply to the evaluation of the damage results. Finally, the proposed evaluation formula aligns with the experimental results, objectively reflecting the actual impact of laser dazzling on the target extraction and the tracking performance of infrared imaging systems. This study provides an in-depth and accurate analysis for understanding the influence of lasers on the performance of infrared imaging detectors.

Optimization of some input parameters of a pulsed TEA CO2 laser based on the generalized Landau-Teller equations

Optimization of some input parameters of a pulsed TEA CO2 laser based on the generalized Landau-Teller equations

Pulsed CO2 Laser Pumped by a Longitudinal Discharge in an Alternating Magnetic Field

Pulsed CO2 Laser Pumped by a Longitudinal Discharge in an Alternating Magnetic Field

Gain measurements of longitudinally excited CO2 laser using low-pressure gas without helium

The gain characteristics of a CO2 laser pumped by a longitudinal pulsed discharge were investigated to develop a compact He-free CO2 laser operating at a high repetition rate. The longitudinal discharge tube had an inner diameter of 0.8 cm and a length of 45 cm. High-voltage pulses with a discharge starting voltage of 13.4–30.2 kV at a rise time of about 321 ns were applied to the discharge tube. CO2/N2 mixture gas with mixing ratios of 1:0, 1:1, 1:2 and 1:3 was used. The small signal gain coefficient was measured by inputting a seed CO2 laser pulse into the longitudinal discharge tube. The small signal gain coefficient depended on the delay time between the start of the discharge in the longitudinal discharge tube and the input of a seed CO2 laser pulse, the gas mixing ratio, the gas pressure, the repetition rate and the input energy to the longitudinal discharge tube. In this work, in He-free gas, the maximum small signal gain coefficient at a repetition rate of 300 Hz was 2.11%/cm with a delay time of 30.4 μs, a CO2/N2 gas mixing ratio of 1:2, a gas pressure of 2.6 kPa and an input energy of 191 mJ.

Self-channeling of a multi-Joule 10 µm picosecond pulse train through long distances in air.

In the long-wave infrared (LWIR) range, where, due to wavelength scaling, the critical power of Kerr self-focusing Pcr in air increases to 300-400 GW, we demonstrate that without external focusing a train of picosecond CO2 laser pulses can propagate in the form of a single several-centimeter diameter channel over hundreds of meters. The train of 10 µm pulses, for which the total energy ≥20 J is distributed over several near-terawatt picosecond pulses with a maximum power ≤2Pcr, is generated naturally during short pulse amplification in a CO2 laser. It is observed that the high-power 10 µm beam forms a large diameter "hot gas" channel in the ambient air with a ≥ 50 ms lifetime. Simulations of the experiment show that such filamentation-free self-channeling regime has low propagation losses and can deliver multi-Joule/TW-power LWIR pulses over km-scale distances.

Optical Discharge Regimes Sustained by a Continuously Pumped, Q-Switched Pulsed CO2 Laser

Optical Discharge Regimes Sustained by a Continuously Pumped, Q-Switched Pulsed CO2 Laser

Influence of pulse-tail energy of short-pulse CO2 laser in drilling of various glasses

In a short-pulse CO2 laser based on discharge excitation, there is a pulse tail that depends on the device configuration and operating conditions. The pulse tail is longer than the spike pulse and causes thermal effects such as a crack, heat-affected zones (HAZ), and so on. There are various types of glass having different physical constants related to heat, such as the thermal expansion coefficient and the softening point. Even if the same CO2 laser pulse is radiated onto glass, the processing results may differ depending on the glass material. Four types of glass, namely, crown glass, soda-lime glass, borosilicate glass, and synthetic quartz glass were irradiated with two types of short CO2 laser pulses, one with a large pulse tail and one with a small pulse tail, at a repetition rate of 200 Hz and a fluence per pulse of 22 J/cm2. As the processing characteristics, the ratios of the surface hole diameter and the HAZ diameter to the irradiation diameter, as well as the drilling depth, were investigated. The pulse-tail energy of the short CO2 laser pulses did not affect the surface hole diameter. In the glasses with small softening points of 740 °C or less, the pulse-tail energy of short CO2 laser pulses affected the HAZ with a large number of pulse irradiations with a total irradiation fluence of 2000 J/cm2 or more. The short CO2 laser pulses with a small tail produced a smaller HAZ than the short CO2 laser pulses with a large tail. In drilling with a large number of pulse irradiations, the short CO2 laser pulses with a small tail produced deeper drilling than the short CO2 laser pulses with a large tail. The glass material did not affect the surface hole diameter and the drilling depth. The glass material affected the HAZ.

Theoretical and experimental investigations in thermo-mechanical properties of fused silica with pulsed CO2 laser ablation.

Laser ablation is widely used as a flexible and non-contact processing technology for the fabrication of fused silica. However, the introduction of thermal stress inevitably leads to crack growth and reduces the lifetime of fused silica. Due to the complicated coupling interaction and properties of fused silica, the unclear thermal stress formation is the bottleneck restricting further development of laser ablation. In this article, a three-dimensional multi-physics thermo-mechanical model was developed to reveal the evolution mechanism, and experiments were performed to validate the simulated results. The surface morphology evolution was elaborated during process cycles, with recoil pressure identified as the key factor in determining surface morphology. Moreover, thermal stress was quantified utilizing optical retardance and stress birefringence, effectively distinguishing between non-thermal and thermal stress induced by laser ablation. The theoretical simulations fit well with experimental measurements. Meanwhile, stress distribution and evolution behaviors were revealed under different processing parameters by this model. This work not only contributes to a profound understanding of the laser ablation process but also establishes a theoretical foundation for achieving high surface quality and non-thermal stress laser ablation.