A pulsed limestone bed (PLB) treatment plant for remediation of acid mine drainage (AMD) has been tested at the Friendship Hill National Historic site in southwestern Pennsylvania. The plant performed well, neutralizing over 50 metric tons of acidity over a 14-month period, but the cost of disposal of the 450 metric tons of sludge generated was high, because the sludge was hauled from the site and disposed of in a commercial landfill to minimize the impact on park property. Although the sludge was found to be non-hazardous based on the Toxicity Characteristics Leaching Protocol (TCLP), hauling and disposal costs were still elevated, at $40 per m 3 . Since sludge handling and disposal was a significant fraction of the operating cost of the facility, a study of the sludge characteristics and possible alternate handling methods was undertaken. Samples of AMD influent, treated water and settled sludge were used in a series of small- scale treatment studies. These tests showed that the sludge volume produced by limestone neutralization was less than half of that for lime, sodium hydroxide or ammonia. The settling rate was also greater for the limestone-based sludge. Vacuum filtration tests demonstrated that the limestone sludge was more readily filtered than sludges generated with sodium hydroxide or lime and that solids contents of up to 28% could be achieved. Because of lower maintenance costs, pressure filtration using a plate and frame filter is recommended for future plant operations. In this case, solids contents of as high as 31% were realized. As an alternative to the operating costs of mechanical filtration, a settling/percolation process was tested. Percolation tests showed that solids content of the settled sludge could be increased from 8% to 25%. These results show that sludge disposal costs for the treatment plant could be decreased through installation of a settling or filtration process. Moreover, the PLB process offers saving not only in reagent costs, but also in sludge disposal costs, through decreased sludge volume generated, rapid settling rates and ready filterability.
Read full abstract