PSC Bridges Research Articles

Comparison of the Behavior of PSC Bridges According to Design Train Load before and after Revision of Railway Bridge Design Standard

Comparison of the Behavior of PSC Bridges According to Design Train Load before and after Revision of Railway Bridge Design Standard

차세대 고속철 주행속도를 대비한 교량받침의 장기마찰시험법

Structural behaviour of PSC box bridge, on which KTX train runs, is analysed up to 500 km/h speed considering 12 stages track irregularity and interaction between bridge and vehicle. To evaluate wheel forces and rotations of vehicle, lateral wheel forces, derail factor and offload factor calculated on the track combining the bridge and 170 m normal track are compared with existing allowed limits. Maximum longitudinal displacement and accumulated sliding distance of the brige bearings for simply supported and 2 span continuous PSC bridges are presented by each running speeds. Long-term friction tests based on EN-1337-2 are conducted between PTFE and DP-mate plates. Finally, the long-term friction tests are proposed to consider the increasing speed of next generation high-speed train.

철도교량 구조형식별 감쇠비 하한값 산정을 위한 시험적 연구

철도교량 동적 설계 및 동적 안전성을 해석적으로 평가하기 위해서는 교량의 감쇠비를 산정하는 것이 매우 중요하다. 본 연구에서는 국내 고속 및 일반철도에서 일반적으로 사용되고 있는 소수주형강합성교, PSC Box, Steel Box, PSC, IPC, Precom, Preflex에 대하여 실내 모형실험 및 운행 중 현장계측을 하였다. 이러한 고속 및 일반철도의 대표적 교량형식에 대한 실내외 시험을 통해 대수감소율을 적용하여 감쇠비를 분석하였다. 따라서 철도교량의 감쇠비는 하중크기, 가진주파수, 진폭에 영향을 받지 않는 것으로 분석되었다. 또한, 기존 철도설계기준에 제시된 감쇠비 하한치와 비교하여 PSC구조 및 강합성구조 철도교량의 경우 감쇠비 하한값을 1.0%로 적용하는 것이 합리적이라 판단되었다. The damping ratio of railway bridge has become one of the most important issues in dynamic design and dynamic stability of railway bridge. In the present study, laboratory and field test were performed for railway bridges such as a twin I-shaped steel composite girder, PSC box, steel box, PSC, IPC, PRECOM, preflex. The damping ratio of railway bridge according to structure types was estimated by logarithmic decrement method. Therefore, magnitude, frequency and amplitude of load did not affect damping ratio of railway bridge. Also, damping ratio limit of steel composite and PSC bridges was evaluated in 1.0%.

Identification of prestress-loss in PSC beams using modal information

One of the uncertain damage parameters to jeopardize the safety of existing PSC bridges is the loss of the prestress force. A substantial prestress-loss can lead to severe problems in the serviceability and safety of the PSC bridges. In this paper, a nondestructive method to detect prestress-loss in beam-type PSC bridges using a few natural frequencies is presented. An analytical model is formulated to estimate changes in natural frequencies of the PSC bridges under various prestress forces. Also, an inverse-solution algorithm is proposed to detect the prestress-loss by measuring the changes in natural frequencies. The feasibility of the proposed approach is evaluated using PSC beams for which a few natural frequencies were experimentally measured for a set of prestress-loss cases. Numerical models of two-span continuous PSC beams are also examined to verify that the proposed algorithm works on more complicated cases.

ChemInform Abstract: Persulfuration of Phosphinines: Synthesis and X‐Ray Crystal Structure Analysis of a P2S3 Derivative.

The reaction of 4,5-dimethyl-2-phenylphosphinine with sulfur in boiling benzene in the presence of N-methylimidazole as a catalyst first yields a P-sulfide. This monosulfide further reacts with sulfur to give a diphosphinine trisulfide and a diphosphinine tetrasulfide. The X-ray crystal structure analysis of the trisulfide has been carried out. The two head-to-tail 1,6-dihydrophosphinine rings are connected by PSC and PC links, thus forming a central 1,2,4-thiadiphospholane heterocycle. The PC bridge is weak [1.881(3) A] and sulfur can insert into it to give the symmetrical tetrasulfide with two PSC bridges.