Protospacer Adjacent Motif Sequence Research Articles

CRISPR/Cpf1-mediated mutagenesis and gene deletion in industrial filamentous fungi Aspergillus oryzae and Aspergillus sojae

In industrial applications such as fermentation and heterologous protein production, various Aspergillus oryzae and A. sojae strains are used. Although genetic engineering techniques have been developed for these filamentous fungi, applying such classical techniques to many strains is difficult. Therefore, the establishment of innovative technologies applicable to various industrial strains is required. We previously developed a genome editing technology using the CRISPR/Cas9 system for the efficient genetic engineering of A.oryzae; however, this system is limited by its protospacer adjacent motif sequence. In A.sojae, no genetic engineering using genome editing has been developed. In this study, we aimed to develop a genome editing technology using the Cpf1 nuclease for the genetic engineering of A.oryzae and A.sojae. AMA1-based genome editing vectors bearing codon-optimized cpf1 expression cassettes were constructed, and guide RNA expression cassettes were inserted into the Cpf1 genome editing vectors. Using the resultant plasmids, we performed mutagenesis of the AowA and sC genes in A.oryzae and the AswA gene in A.sojae. We deleted these genes by co-introducing the Cpf1 genome editing plasmid and the donor plasmid. Our study demonstrates that the CRISPR/Cpf1 system can be used as an efficient alternative to the CRISPR/Cas9 system to genetically engineer A.oryzae and as a new approach for efficient genetic engineering of A.sojae.

Adenine base-editing-mediated exon skipping induces gene knockout in cultured pig cells.

Gene-knockout pigs have important applications in agriculture and medicine. Compared with CRISPR/Cas9, Adenine base editor (ABE) convert single A·T pairs to G·C pairs in the genome without generating DNA double-strand breaks, and this method has higher accuracy and biosafety in pig genetic modification. However, the application of ABE in pig gene knockout is limited by protospacer-adjacent motif sequences and the base-editing window. Alternative mRNA splicing is an important mechanism underlying the formation of proteins with diverse functions in eukaryotes. Spliceosome recognizes the conservative sequences of splice donors and acceptors in a precursor mRNA. Mutations in these conservative sequences induce exon skipping, leading to proteins with novel functions or to gene inactivation due to frameshift mutations. In this study, adenine base-editing-mediated exon skipping was used to expand the application of ABE in the generation of gene knockout pigs. We first constructed a modified "all-in-one" ABE vector suitable for porcine somatic cell transfection that contained an ABE for single-base editing and an sgRNA expression cassette. The "all-in-one" ABE vector induced efficient sgRNA-dependent A-to-G conversions in porcine cells during single base-editing of multiple endogenous gene loci. Subsequently, an ABE system was designed for single adenine editing of the conservative splice acceptor site (AG sequence at the 3' end of the intron 5) and splice donor site (GT sequence at the 5' end of the intron 6) in the porcine gene GHR; this method achieved highly efficient A-to-G conversion at the cellular level. Then, porcine single-cell colonies carrying a biallelic A-to-G conversion in the splice acceptor site in the intron 5 of GHR were generated. RT-PCR indicated exon 6 skipped at the mRNA level. Western blotting revealed GHR protein loss, and gene sequencing showed no sgRNA-dependent off-target effects. These results demonstrate accurate adenine base-editing-mediated exon skipping and gene knockout in porcine cells. This is the first proof-of-concept study of adenine base-editing-mediated exon skipping for gene regulation in pigs, and this work provides a new strategy for accurate and safe genetic modification of pigs for agricultural and medical applications.

S. Aureus Cas9 Leads to Higher Sickle Mutation Correction Compared to S. Pyogenes Cas9 in Patient Hematopoietic Stem and Progenitor Cells

Introduction: Sickle cell disease (SCD) is a red blood cell disorder caused by a single nucleotide mutation in the β-globin gene (HBB). Allogeneic hematopoietic stem cell transplantation (HSCT) is the only available cure, but is available to only a minority of patients and can be associated with high morbidity and mortality. CRISPR/Cas9 mediated genome editing may provide a permanent cure for SCD patients by correcting the sickle mutation in HBB in hematopoietic stem and progenitor cells (HSPCs). Previously, we achieved ~39% sickle mutation correction in SCD HSPCs by delivering S. pyogenes (Spy) Cas9/R-66S gRNA as ribonucleoprotein (RNP) and single-stranded oligodeoxynucleotides (ssODN) corrective donor template. S. aureus (Sau) Cas9 has potentially advantageous properties to improve therapeutic gene editing efficiency and safety, including smaller size allowing for efficient in vivo delivery and longer Protospacer Adjacent Motif (PAM) sequence for higher specificity. However, although in general, the cutting efficiency of SauCas9 is lower than SpyCas9, the differences in gene correction and other gene-editing outcomes between SpyCas9 and SauCas9 have not been well studied.Methods: With our R-66S gRNA sequence targeting the sickle mutation, the PAM sequence of SauCas9 (NGGRRT) is mutually permissive with that of SpyCas9 (NGG), allowing the same sequence to be targeted by both Cas9 nucleases. We delivered R-66S gRNA with SpyCas9 and SauCas9 respectively as RNP, along with corrective ssODN donor template into SCD HSPCs. We analyzed sickle mutation correction rate and small insertions and deletions (INDELs) profile by Next Generation Sequencing (NGS).Results/discussions: We found that although the INDEL rate of SpyCas9 is higher than SauCas9 at the same molar concentration of RNP, SauCas9 gave 43% sickle mutation correction, slightly higher than SpyCas9 (39%), demonstrating efficient homology-directed repair (HDR) mediated gene correction by SauCas9. To further investigate the potential for clinical translation, we will perform in-depth efficiency and safety characterization comparing SauCas9 and SpyCas9 mediated sickle mutation correction therapy in SCD HSPCs.Conclusion: In this work, we showed that, compared with the highly-optimized and widely-used SpyCas9, SauCas9 leads to a higher sickle mutation correction in SCD HSPCs, demonstrating the therapeutic potential of SauCas9 for treating SCD. We will further investigate the efficiency and safety of gene-edited therapy mediated by these two Cas9 orthologs, including in-depth characterization of off-target effects, chromosomal rearrangement and aberrations, and large genomic modifications. We will differentiate gene-corrected SCD HSPCs to study erythropoiesis and red cell phenotype, including normal hemoglobin production and reduced sickling under hypoxic conditions. Lastly, we will evaluate the engraftment efficiency of gene-edited cells in Nonirradiated NOD,B6.SCID Il2rγ -/- Kit (W41/W41) (NBSGW) mice that support the engraftment of human hematopoietic stem cells. DisclosuresSheehan: Forma Therapeutics: Research Funding; Beam Therapeutics: Research Funding; Novartis: Research Funding.

PAM-repeat associations and spacer selection preferences in single and co-occurring CRISPR-Cas systems

BackgroundThe adaptive CRISPR-Cas immune system stores sequences from past invaders as spacers in CRISPR arrays and thereby provides direct evidence that links invaders to hosts. Mapping CRISPR spacers has revealed many aspects of CRISPR-Cas biology, including target requirements such as the protospacer adjacent motif (PAM). However, studies have so far been limited by a low number of mapped spacers in the database.ResultsBy using vast metagenomic sequence databases, we map approximately one-third of more than 200,000 unique CRISPR spacers from a variety of microbes and derive a catalog of more than two hundred unique PAM sequences associated with specific CRISPR-Cas subtypes. These PAMs are further used to correctly assign the orientation of CRISPR arrays, revealing conserved patterns between the last nucleotides of the CRISPR repeat and PAM. We could also deduce CRISPR-Cas subtype-specific preferences for targeting either template or coding strand of open reading frames. While some DNA-targeting systems (type I-E and type II systems) prefer the template strand and avoid mRNA, other DNA- and RNA-targeting systems (types I-A and I-B and type III systems) prefer the coding strand and mRNA. In addition, we find large-scale evidence that both CRISPR-Cas adaptation machinery and CRISPR arrays are shared between different CRISPR-Cas systems. This could lead to simultaneous DNA and RNA targeting of invaders, which may be effective at combating mobile genetic invaders.ConclusionsThis study has broad implications for our understanding of how CRISPR-Cas systems work in a wide range of organisms for which only the genome sequence is known.

Fast and Efficient Generation of Isogenic Induced Pluripotent Stem Cell Lines Using Adenine Base Editing.

Isogenic induced pluripotent stem cell (iPSC) lines are currently mostly created by homology directed repair evoked by a double-strand break (DSB) generated by CRISPR-Cas9. However, this process is in general lengthy and inefficient. This problem can be overcome, specifically for correction or insertion of transition mutations, by using base editing (BE). BE does not require DSB formation, hence avoiding creation of genomic off-target breaks and insertions and deletions, and as it is highly efficient, it also does not require integration of selection cassettes in the genome to enrich for edited cells. BE has been successfully used in many cell types as well as in some in vivo settings to correct or insert mutations, but very few studies have reported generation of isogenic iPSC lines using BE. Here, we describe a simple and fast workflow to generate isogenic iPSCs efficiently with a compound heterozygous or a homozygous Wolfram syndrome 1 (WFS1) mutation using adenine BE, without the need to include a genomic selection cassette and without off-target modifications. We demonstrated that correctly base-edited clones can be generated by screening only five cell clones in less than a month, provided that the mutation is positioned in a correct place with regards to the protospacer adjacent motif sequence and no putative bystander bases exist.

Efficient knockout of the phytoene desaturase gene in a hybrid poplar (Populus alba × Populus glandulosa) using the CRISPR/Cas9 system with a single gRNA.

The CRISPR/Cas9 system has been used for genome editing in several plant species; however, there are few reports on its use in trees. Here, CRISPR/Cas9 was used to mutate a target gene in Populus alba × Populus glandulosa hybrid poplars. The hybrid poplar is routinely used in molecular biological studies due to the well-established Agrobacterium-mediated transformation method. A single guide RNA (sgRNA) with reported high mutation efficiency in other popular species was designed with a protospacer adjacent motif sequence for the phytoene desaturase 1 (PagPDS1) gene. The pHSE/Cas9-PagPDS1 sgRNA vector was delivered into hybrid poplar cells using Agrobacterium-mediated transformation. The transgenic plants were propagated and classified them into three groups according to their phenotypes. Among a total of 110 lines of transgenic hybrid poplars, 82 lines showed either an albino or a pale green phenotype, indicating around 74.5% phenotypic mutation efficiency of the PagPDS1 gene. The albino phenotypes were observed when the CRISPR/Cas9-mediated mutations in both PagPDS1 alleles in the transgenic plants. There was no off-target modification of the PagPDS2 gene, which has a potential sgRNA target sequence with two mismatches. The results confirmed that the sgRNA can specifically edit PagPDS1 rather than PagPDS2, indicating that CRISPR/Cas9-mediated genome editing can effectively induce target mutations in the hybrid poplar. This technique will be useful to improve tree quality in hybrid poplars (P. alba × P. glandulosa); for example, by enhancing biomass or stress tolerance.

Screening of CRISPR/Cas9 gRNA for mimicking Powdery Mildew resistant MLO ol-2 mutant.

Powdery Mildew (PM) caused by fungal pathogen Oidium neolycopersici (O. neolycopersici) affects both greenhouse and field-grown tomato production. Resistance to PM disease can be achieved by selective inactivation of Mildew Resistance Locus O (MLO) genes encoding heptahelical transmembrane domains, which confer susceptibility to fungal pathogens. Natural loss-of-function mutation is a 19 base pair (bp) deletion in the SlMLO1 gene locus responsible for fungal resistance in S. lycopersicum var. cerasiforme. Introgression of these resistance alleles through breeding into elite varieties is possible. However, this is a long and labour-intensive process and has limitations due to linkage drag. Nonetheless, recent developments in the field of genome editing technology particularly CRISPR/Cas9 systems allows quick, effective and accurate genome modification at the target gene locus. Therefore, it is of interest to determine the efficacy and exact deletion that mimics the natural ol-2 (Slmlo1) mutation present in wild tomatoes using CRISPR/Cas9. 947 putative guide RNAs (gRNAs) were designed using Cas9 variants to broaden Protospacer Adjacent Motif (PAM) compatibility and to enhance DNA specificity against the SlMLO1 locus. 60 out of 947 gRNAs were selected based on the recognition of the PAM sequence, the MIT specificity ranking, the off-target sites, their distance from the 19bp natural ol-2 mutation, the secondary structure of the gRNAs, and their minimum free energy. In depth analysis of these 60 gRNAs helped in the selection of the top five gRNAs based on the above-mentioned criteria. These gRNAs are useful for introducing deletions identical to natural ol-2 mutants and impart resistance against fungal pathogen O. neolycopersici in cultivated tomato crops.

Detection of rare variant alleles using the AsCas12a double-stranded DNA trans-cleavage activity

The sensitive and accurate detection of rare mutations has profound clinical implications; however, current methods require expensive instrumentation and are laborious and time-consuming. Thus, there is a need for a probe-based alternative that can effectively discriminate single-base mutations. Recently, several groups have shown the potential of the CRISPR/Cas12a system for sensitive and selective DNA detection but its application on single nucleotide variants (SNVs) detection is limited by the requirement of a protospacer adjacent motif (PAM) directly upstream to the SNV site and the amplification of non-specific signals due to the rapid and indiscriminate trans cleavage activity. Here, we report an ultra-selective Cas12a-based system that eliminates the need for the PAM sequence in the target with lower noise from the wild-type sequence by using its non-canonical double-stranded trans-cleavage activity. We show that our strategy can allow the detection of an EGFR gene mutation in sub-femtomolar concentrations up to 0.1% variant allele frequency using either fluorescence or electrochemical readouts.

Knock-in and precise nucleotide substitution using near-PAMless engineered Cas9 variants in Dictyostelium discoideum

The powerful genome editing tool Streptococcus pyogenes Cas9 (SpCas9) requires the trinucleotide NGG as a protospacer adjacent motif (PAM). The PAM requirement is limitation for precise genome editing such as single amino-acid substitutions and knock-ins at specific genomic loci since it occurs in narrow editing window. Recently, SpCas9 variants (i.e., xCas9 3.7, SpCas9-NG, and SpRY) were developed that recognise the NG dinucleotide or almost any other PAM sequences in human cell lines. In this study, we evaluated these variants in Dictyostelium discoideum. In the context of targeted mutagenesis at an NG PAM site, we found that SpCas9-NG and SpRY were more efficient than xCas9 3.7. In the context of NA, NT, NG, and NC PAM sites, the editing efficiency of SpRY was approximately 60% at NR (R = A and G) but less than 22% at NY (Y = T and C). We successfully used SpRY to generate knock-ins at specific gene loci using donor DNA flanked by 60 bp homology arms. In addition, we achieved point mutations with efficiencies as high as 97.7%. This work provides tools that will significantly expand the gene loci that can be targeted for knock-out, knock-in, and precise point mutation in D. discoideum.

Exploiting heterologous and endogenous CRISPR-Cas systems for genome editing in the probiotic Clostridium butyricum.

Clostridium butyricum has been widely used as a probiotic for humans and food animals. However, the mechanisms of beneficial effects of C. butyricum on the host remain poorly understood, largely due to the lack of high-throughput genome engineering tools. Here, we report the exploitation of heterologous Type II CRISPR-Cas9 system and endogenous Type I-B CRISPR-Cas system in probiotic C. butyricum for seamless genome engineering. Although successful genome editing was achieved in C. butyricum when CRISPR-Cas9 system was employed, the expression of toxic cas9 gene result in really poor transformation, spurring us to develop an easy-applicable and high-efficient genome editing tool. Therefore, the endogenous Type I-B CRISPR-Cas machinery located on the megaplasmid of C. butyricum was co-opted for genome editing. In vivo plasmid interference assays identified that ACA and TAA were functional protospacer adjacent motif sequences needed for site-specific CRISPR attacking. Using the customized endogenous CRISPR-Cas system, we successfully deleted spo0A and aldh genes in C. butyricum, yielding an efficiency of up to 100%. Moreover, the conjugation efficiency of endogenous CRISPR-Cas system was dramatically enhanced due to the precluding expression of cas9. Altogether, the two approaches developed herein remarkably expand the existing genetic toolbox available for investigation of C. butyricum.

Dead Cas9-sgRNA Complex Shelters Vulnerable DNA Restriction Enzyme Sites from Cleavage for Cloning Applications.

The creation of the nuclease-dead Cas protein (dCas9) offers a new platform for a plethora of new discoveries. Diverse dCas9 tools have been developed for transcription regulation, epigenetic engineering, base editing, genome imaging, genetic screens, and chromatin immunoprecipitation. Here, we show that dCas9 and single-guide RNA preassembled to form ribonucleoprotein dCas9-sgRNA (referred to as dRNP) is capable of specifically and reversibly blocking the activity of DNA cleavage by restriction enzymes (REs). We show that the inhibition of RE activities occurs when the recognition or the cleavage site of the DNA is overlapped by the sgRNA or the protospacer adjacent motif sequence. Furthermore, we show that multiple dRNPs can be used simultaneously to inhibit more than one RE sites. As such, we exploited this novel finding as a method to demonstrate that inserts can be ligated into vectors, and vice versa, whereby selective RE sites are temporarily sheltered to allow the desired cloning.

Rice Protein Tagging Project: A Call for International Collaborations on Genome-wide In-Locus Tagging of Rice Proteins

Rice Protein Tagging Project: A Call for International Collaborations on Genome-wide In-Locus Tagging of Rice Proteins

A catalogue of biochemically diverse CRISPR-Cas9 orthologs

Bacterial Cas9 nucleases from type II CRISPR-Cas antiviral defence systems have been repurposed as genome editing tools. Although these proteins are found in many microbes, only a handful of variants are used for these applications. Here, we use bioinformatic and biochemical analyses to explore this largely uncharacterized diversity. We apply cell-free biochemical screens to assess the protospacer adjacent motif (PAM) and guide RNA (gRNA) requirements of 79 Cas9 proteins, thus identifying at least 7 distinct gRNA classes and 50 different PAM sequence requirements. PAM recognition spans the entire spectrum of T-, A-, C-, and G-rich nucleotides, from single nucleotide recognition to sequence strings longer than 4 nucleotides. Characterization of a subset of Cas9 orthologs using purified components reveals additional biochemical diversity, including both narrow and broad ranges of temperature dependence, staggered-end DNA target cleavage, and a requirement for long stretches of homology between gRNA and DNA target. Our results expand the available toolset of RNA-programmable CRISPR-associated nucleases.

Effective Blocking of Microbial Transcriptional Initiation by dCas9-NG-Mediated CRISPR Interference.

CRISPR interference (CRISPRi) has been developed as a transcriptional control tool by inactivating the DNA cleavage ability of Cas9 nucleases to produce dCas9 (deactivated Cas9), and leaving dCas9 the ability to specifically bind to the target DNA sequence. CRISPR/Cas9 technology has limitations in designing target-specific single-guide RNA (sgRNA) due to the dependence of protospacer adjacent motif (PAM) (5'-NGG) for binding target DNAs. Reportedly, Cas9-NG recognizing 5'-NG as the PAM sequence has been constructed by removing the dependence on the last base G of PAM through protein engineering of Cas9. In this study, a dCas9-NG protein was engineered by introducing two active site mutations in Cas9-NG, and its ability to regulate transcription was evaluated in the gal promoter in E. coli. Analysis of cell growth rate, D-galactose consumption rate, and gal transcripts confirmed that dCas9-NG can completely repress the promoter by recognizing DNA targets with PAM of 5'-NGG, NGA, NGC, NGT, and NAG. Our study showed possible PAM sequences for dCas9-NG and provided information on target-specific sgRNA design for regulation of both gene expression and cellular metabolism.

DNB-based on-chip motif finding: A high-throughput method to profile different types of protein-DNA interactions.

Here, we report a sensitive DocMF system that uses next-generation sequencing chips to profile protein-DNA interactions. Using DocMF, we successfully identified a variety of endonuclease recognition sites and the protospacer adjacent motif (PAM) sequences of different CRISPR systems. DocMF can simultaneously screen both 5' and 3' PAMs with high coverage. For SpCas9, we found noncanonical 5'-NAG-3' (~5%) and 5'-NGA-3' (~1.6%), in addition to its common PAMs, 5'-NGG-3' (~89.9%). More relaxed PAM sequences of two uncharacterized Cas endonucleases, VeCas9 and BvCas12a, were extensively characterized using DocMF. Moreover, we observed that dCas9, a DNA binding protein lacking endonuclease activity, preferably bound to the previously reported 5'-NGG-3' sequence. In summary, our studies demonstrate that DocMF is the first tool with the capacity to exhaustively assay both the binding and the cutting properties of different DNA binding proteins.

Expanding plant genome-editing scope by an engineered iSpyMacCas9 system that targets A-rich PAM sequences

The most popular CRISPR-SpCas9 system recognizes canonical NGG protospacer adjacent motifs (PAMs). Previously engineered SpCas9 variants, such as Cas9-NG, favor G-rich PAMs in genome editing. In this manuscript, we describe a new plant genome-editing system based on a hybrid iSpyMacCas9 platform that allows for targeted mutagenesis, C to T base editing, and A to G base editing at A-rich PAMs. This study fills a major technology gap in the CRISPR-Cas9 system for editing NAAR PAMs in plants, which greatly expands the targeting scope of CRISPR-Cas9. Finally, our vector systems are fully compatible with Gateway cloning and will work with all existing single-guide RNA expression systems, facilitating easy adoption of the systems by others. We anticipate that more tools, such as prime editing, homology-directed repair, CRISPR interference, and CRISPR activation, will be further developed based on our promising iSpyMacCas9 platform.

Enhancement of target specificity of CRISPR-Cas12a by using a chimeric DNA-RNA guide.

The CRISPR–Cas9 system is widely used for target-specific genome engineering. CRISPR–Cas12a (Cpf1) is one of the CRISPR effectors that controls target genes by recognizing thymine-rich protospacer adjacent motif (PAM) sequences. Cas12a has a higher sensitivity to mismatches in the guide RNA than does Cas9; therefore, off-target sequence recognition and cleavage are lower. However, it tolerates mismatches in regions distant from the PAM sequence (TTTN or TTN) in the protospacer, and off-target cleavage issues may become more problematic when Cas12a activity is improved for therapeutic purposes. Therefore, we investigated off-target cleavage by Cas12a and modified the Cas12a (cr)RNA to address the off-target cleavage issue. We developed a CRISPR–Cas12a that can induce mutations in target DNA sequences in a highly specific and effective manner by partially substituting the (cr)RNA with DNA to change the energy potential of base pairing to the target DNA. A model to explain how chimeric (cr)RNA guided CRISPR–Cas12a and SpCas9 nickase effectively work in the intracellular genome is suggested. Chimeric guide-based CRISPR- Cas12a genome editing with reduced off-target cleavage, and the resultant, increased safety has potential for therapeutic applications in incurable diseases caused by genetic mutations.

Efficient Multiplex Genome Editing in Streptomyces via Engineered CRISPR-Cas12a Systems.

Streptomyces strains produce a great number of valuable natural products. With the development of genome sequencing, a vast number of biosynthetic gene clusters with high potential for use in the discovery of valuable clinical drugs have been revealed. Therefore, emerging needs for tools to manipulate these biosynthetic pathways are presented. Although the clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas 9) system has exhibited great capabilities for gene editing in multiple Streptomyces strains, it has failed to work in some newly discovered strains and some important industrial strains. Additionally, the protospacer adjacent motif (PAM) recognition scope of this system sometimes limits its applications for generating precise site mutations and insertions. Here, we developed three efficient CRISPR-FnCas12a systems for multiplex genome editing in several Streptomyces strains. Each system exhibited advantages for different applications. The CRISPR-FnCas12a1 system was efficiently applied in the industrial strain Streptomyces hygroscopicus, in which SpCas9 does not work well. The CRISPR-FnCas12a2 system was used to delete large fragments ranging from 21.4 to 128 kb. Additionally, the CRISPR-FnCas12a3 system employing the engineered FnCas12a mutant EP16, which recognizes a broad spectrum of PAM sequences, was used to precisely perform site mutations and insertions. The CRISPR-FnCas12a3 system addressed the limitation of TTN PAM recognition in Streptomyces strains with high GC contents. In summary, all the CRISPR-FnCas12a systems developed in this study are powerful tools for precise and multiplex genome editing in Streptomyces strains.

A Cas9 with PAM recognition for adenine dinucleotides

CRISPR-associated (Cas) DNA-endonucleases are remarkably effective tools for genome engineering, but have limited target ranges due to their protospacer adjacent motif (PAM) requirements. We demonstrate a critical expansion of the targetable sequence space for a type II-A CRISPR-associated enzyme through identification of the natural 5^{prime}-NAAN-3^{prime} PAM preference of Streptococcus macacae Cas9 (SmacCas9). To achieve efficient editing activity, we graft the PAM-interacting domain of SmacCas9 to its well-established ortholog from Streptococcus pyogenes (SpyCas9), and further engineer an increased efficiency variant (iSpyMac) for robust genome editing activity. We establish that our hybrids can target all adenine dinucleotide PAM sequences and possess robust and accurate editing capabilities in human cells.

Quantification of the affinities of CRISPR–Cas9 nucleases for cognate protospacer adjacent motif (PAM) sequences

The CRISPR/Cas9 nucleases have been widely applied for genome editing in various organisms. Cas9 nucleases complexed with a guide RNA (Cas9-gRNA) find their targets by scanning and interrogating the genomic DNA for sequences complementary to the gRNA. Recognition of the DNA target sequence requires a short protospacer adjacent motif (PAM) located outside this sequence. Given that the efficiency of target location may depend on the strength of interactions that promote target recognition, here we sought to compare affinities of different Cas9 nucleases for their cognate PAM sequences. To this end, we measured affinities of Cas9 nucleases from Streptococcus pyogenes, Staphylococcus aureus, and Francisella novicida complexed with guide RNAs (gRNAs) (SpCas9-gRNA, SaCas9-gRNA, and FnCas9-gRNA, respectively) and of three engineered SpCas9-gRNA variants with altered PAM specificities for short, PAM-containing DNA probes. We used a "beacon" assay that measures the relative affinities of DNA probes by determining their ability to competitively affect the rate of Cas9-gRNA binding to fluorescently labeled target DNA derivatives called "Cas9 beacons." We observed significant differences in the affinities for cognate PAM sequences among the studied Cas9 enzymes. The relative affinities of SpCas9-gRNA and its engineered variants for canonical and suboptimal PAMs correlated with previous findings on the efficiency of these PAM sequences in genome editing. These findings suggest that high affinity of a Cas9 nuclease for its cognate PAM promotes higher genome-editing efficiency.