Protein Trans-splicing Research Articles

Optimization of sortase A ligation for flexible engineering of complex protein systems

Engineering and bioconjugation of proteins is a critically valuable tool that can facilitate a wide range of biophysical and structural studies. The ability to orthogonally tag or label a domain within a multidomain protein may be complicated by undesirable side reactions to noninvolved domains. Furthermore, the advantages of segmental (or domain-specific) isotopic labeling for NMR, or deuteration for neutron scattering or diffraction, can be realized by an efficient ligation procedure. Common methods-expressed protein ligation, protein trans-splicing, and native chemical ligation-each have specific limitations. Here, we evaluated the use of different variants of Staphylococcus aureus sortase A for a range of ligation reactions and demonstrate that conditions can readily be optimized to yield high efficiency (i.e. completeness of ligation), ease of purification, and functionality in detergents. These properties may enable joining of single domains into multidomain proteins, lipidation to mimic posttranslational modifications, and formation of cyclic proteins to aid in the development of nanodisc membrane mimetics. We anticipate that the method for ligating separate domains into a single functional multidomain protein reported here may enable many applications in structural biology.

Insertion of Synthetic Peptides into Proteins by Tandem Protein Trans-Splicing

Engineering proteins through chemical or genetic manipulations offers great potential to design and study proteins with complex properties. Despite tremendous progress, the type and combination of chemical modification (e.g. non-canonical amino acids (ncAAs) or post-translational modifications (PTMs)) that can be incorporated by genetic means (e.g. amber codon suppression) is still limited. Semi-synthetic approaches offer a post-translational alternative to synthetically introduce modifications into proteins, but have typically been performed in vitro and restricted to small proteins that can be easily refolded. Here, we present a method to incorporate synthetic peptides carrying multiple PTMs or ncAAs into both cytosolic and membrane proteins. The work is performed in live eukaryotic cells by tandem protein trans-splicing (PTS) using two orthogonal split intein pairs. We anticipate the approach to be broadly applicable as it allows for the introduction of a virtually limitless array of modifications, including those not accessible by existing methods.

In Vivo Histone Labeling Using Ultrafast trans-Splicing Inteins.

The development of expressed protein ligation(EPL) widened the scope of questions that could be addressed by mechanistic biochemistry. Protein trans-splicing (PTS) relies on the same basic chemical principles, but utilizes split inteins to tracelessly ligate distinct peptide or polypeptide fragments together with native peptide bonds. Here we present a method to adapt PTS methodologies for their use in live cells, in order to deliver synthetic or native histone modifications. As an example, we provide a protocol to incorporate a small molecule fluorophore into chromatinized histones. The protocol should be easily adaptable to incorporate other modifications to chromatin in vivo.

Control of ϕC31 integrase-mediated site-specific recombination by protein trans-splicing.

Serine integrases are emerging as core tools in synthetic biology and have applications in biotechnology and genome engineering. We have designed a split-intein serine integrase-based system with potential for regulation of site-specific recombination events at the protein level in vivo. The ϕC31 integrase was split into two extein domains, and intein sequences (Npu DnaEN and Ssp DnaEC) were attached to the two termini to be fused. Expression of these two components followed by post-translational protein trans-splicing in Escherichia coli generated a fully functional ϕC31 integrase. We showed that protein splicing is necessary for recombination activity; deletion of intein domains or mutation of key intein residues inactivated recombination. We used an invertible promoter reporter system to demonstrate a potential application of the split intein-regulated site-specific recombination system in building reversible genetic switches. We used the same split inteins to control the reconstitution of a split Integrase-Recombination Directionality Factor fusion (Integrase-RDF) that efficiently catalysed the reverse attR x attL recombination. This demonstrates the potential for split-intein regulation of the forward and reverse reactions using the integrase and the integrase-RDF fusion, respectively. The split-intein integrase is a potentially versatile, regulatable component for building synthetic genetic circuits and devices.

Split intein-mediated selection of cells containing two plasmids using a single antibiotic

To build or dissect complex pathways in bacteria and mammalian cells, it is often necessary to recur to at least two plasmids, for instance harboring orthogonal inducible promoters. Here we present SiMPl, a method based on rationally designed split enzymes and intein-mediated protein trans-splicing, allowing the selection of cells carrying two plasmids with a single antibiotic. We show that, compared to the traditional method based on two antibiotics, SiMPl increases the production of the antimicrobial non-ribosomal peptide indigoidine and the non-proteinogenic aromatic amino acid para-amino-L-phenylalanine from bacteria. Using a human T cell line, we employ SiMPl to obtain a highly pure population of cells double positive for the two chains of the T cell receptor, TCRα and TCRβ, using a single antibiotic. SiMPl has profound implications for metabolic engineering and for constructing complex synthetic circuits in bacteria and mammalian cells.

Split selectable markers

Selectable markers are widely used in transgenesis and genome editing for selecting engineered cells with a desired genotype but the variety of markers is limited. Here we present split selectable markers that each allow for selection of multiple “unlinked” transgenes in the context of lentivirus-mediated transgenesis as well as CRISPR-Cas-mediated knock-ins. Split marker gene segments fused to protein splicing elements called “inteins” can be separately co-segregated with different transgenic vectors, and rejoin via protein trans-splicing to reconstitute a full-length marker protein in host cells receiving all intended vectors. Using a lentiviral system, we create and validate 2-split Hygromycin, Puromycin, Neomycin and Blasticidin resistance genes as well as mScarlet fluorescent proteins. By combining split points, we create 3- and 6-split Hygromycin resistance genes, demonstrating that higher-degree split markers can be generated by a “chaining” design. We adapt the split marker system for selecting biallelically engineered cells after CRISPR gene editing. Future engineering of split markers may allow selection of a higher number of genetic modifications in target cells.

A mesophilic cysteine-less split intein for protein trans-splicing applications under oxidizing conditions

Split intein-mediated protein trans-splicing has found extensive applications in chemical biology, protein chemistry, and biotechnology. However, an enduring limitation of all well-established split inteins has been the requirement to carry out the reaction in a reducing environment due to the presence of 1 or 2 catalytic cysteines that need to be in a reduced state for splicing to occur. The concomitant exposure of the fused proteins to reducing agents severely limits the scope of protein trans-splicing by excluding proteins sensitive to reducing conditions, such as those containing critical disulfide bonds. Here we report the discovery, characterization, and engineering of a completely cysteine-less split intein (CL intein) that is capable of efficient trans-splicing at ambient temperatures, without a denaturation step, and in the absence of reducing agents. We demonstrate its utility for the site-specific chemical modification of nanobodies and an antibody Fc fragment by N- and C-terminal trans-splicing with short peptide tags (CysTag) that consist of only a few amino acids and have been prelabeled on a single cysteine using classical cysteine bioconjugation. We also synthesized the short N-terminal fragment of the atypically split CL intein by solid-phase peptide synthesis. Furthermore, using the CL intein in combination with a nanobody-epitope pair as a high-affinity mediator, we showed chemical labeling of the extracellular domain of a cell surface receptor on living mammalian cells with a short CysTag containing a synthetic fluorophore. The CL intein thus greatly expands the scope of applications for protein trans-splicing.

Proximity Induced Splicing Utilizing Caged Split Inteins.

Naturally split inteins drive the ligation of separately expressed polypeptides through a process called protein trans splicing (PTS). The ability to control PTS, so-called conditional protein splicing (CPS), has led to the development of tools to modulate protein structure and function at the post-translational level. CPS applications that utilize proximity as a trigger are especially intriguing as they afford the possibility to activate proteins in both a temporal and spatially targeted manner. In this study, we present the first proximity triggered CPS method that utilizes a naturally split fast splicing intein, Npu. We show that this method is amenable to diverse proximity triggers and capable of reconstituting and locally activating the acetyltransferase p300 in mammalian cells. This technology opens up a range of possibilities for the use of proximity triggered CPS.

Generation of Active Protease Depending on Peptide-Protein Interactions Using Interaction-Dependent Native Chemical Ligation and Protein Trans-Splicing

Abstract An artificial signal transduction system has been constructed by employing engineered human immunodeficiency type-1 (HIV-1) protease and Nostoc punctiforme PCC73102 (Npu) DnaE intein. While the truncation of four amino acid residues at the N-terminus of HIV-1 protease diminished its activity, the attachment of the PQIT sequence into the truncated protease by protein trans-splicing (PTS) reconstituted the enzymatic activity. By combining interaction-dependent native chemical ligation (IDNCL) with the PTS reaction, the peptide-protein interaction was clearly detected by measuring HIV-1 protease activity. Src homology domain 2 (SH2) of c-Src (SrcSH2) and phosphopeptides were used as model binding pairs. HIV-1 protease activities were dose-dependently increased after the IDNCL-PTS reaction when the peptides containing pYEEI (pY = phosohotyrosine) and pYEE sequences were used as the input peptides. HIV-1 protease activity generated by IDNCL-PTS might activate several enzymes, and therefore, the artificial signal transduction system might be available in synthetic biology.

Protein engineering through tandem transamidation.

Semisynthetic proteins engineered to contain non-coded elements such as post-translational modifications (PTMs) represent a powerful class of tools for interrogating biological processes. Here, we introduce a one-pot, chemoenzymatic method that allows broad access to chemically modified proteins. The approach involves a tandem transamidation reaction cascade that integrates intein-mediated protein splicing with enzyme-mediated peptide ligation. We show that this approach can be used to introduce PTMs and biochemical probes into a range of proteins including Cas9 nuclease and the transcriptional regulator MeCP2, which causes Rett syndrome when mutated. The versatility of the approach is further illustrated through the chemical tailoring of histone proteins within a native chromatin setting. We expect our approach will extend the scope of semisynthesis in protein engineering.

Intein-mediated protein trans-splicing expands adeno-associated virus transfer capacity in the retina.

Retinal gene therapy with adeno-associated viral (AAV) vectors holds promises for treating inherited and noninherited diseases of the eye. Although clinical data suggest that retinal gene therapy is safe and effective, delivery of large genes is hindered by the limited AAV cargo capacity. Protein trans-splicing mediated by split inteins is used by single-cell organisms to reconstitute proteins. Here, we show that delivery of multiple AAV vectors each encoding one of the fragments of target proteins flanked by short split inteins results in protein trans-splicing and full-length protein reconstitution in the retina of mice and pigs and in human retinal organoids. The reconstitution of large therapeutic proteins using this approach improved the phenotype of two mouse models of inherited retinal diseases. Our data support the use of split intein-mediated protein trans-splicing in combination with AAV subretinal delivery for gene therapy of inherited blindness due to mutations in large genes.

Utilizing intein trans-splicing for in vivo generation of site-specifically modified proteins.

Many cellular processes as well as their associated pathologies are regulated by protein post-translational modifications (PTMs). Understanding the precise roles of these adducts hinges on the development of methods to robustly and site-specifically manipulate proteins in their physiological environments. Recently, ultrafast intein protein trans-splicing (PTS) was harnessed to incorporate site-specific modifications on cellular chromatin in live cells. In this chapter, we present the protocols for the generation of synthetic modifications on native chromatin as well as highlight the capabilities of this methodology.

Bacterial Cell-Surface Display of Semisynthetic Cyclic Peptides.

Semisynthetic cyclic peptides containing both non-proteinogenic building blocks, as the synthetic part, and a genetically encoded sequence amenable to DNA-based randomization hold great potential to expand the chemical space in the quest for novel bioactive peptides. Key to an efficient selection of novel binders to biomacromolecules is a robust method to link their genotype and phenotype. A novel bacterial cell surface display technology has been developed to present cyclic peptides composed of synthetic and genetically encoded fragments in their backbones. The fragments were combined by protein trans-splicing and intramolecular oxime ligation. To this end, a split intein half and an unnatural amino acid were displayed with the genetically encoded part on the surface of Escherichia coli. Addition of the synthetic fragment equipped with the split intein partner and an aminooxy moiety, as well as the application of a pH-shift protocol, resulted in the onsurface formation of the semisynthetic cyclic peptide. This approach will serve for the generation of cyclic peptide libraries suitable for selection by fluorescence-activated cell sorting, and more generally enables chemical modification of proteins on the bacterial surface.

Naturally split intein Npu DnaE mediated rapid generation of bispecific IgG antibodies

High product purity, preserving natural IgG architecture, and excellent production efficiency are highly desirable in bispecific antibody manufacturing. We have reported a platform called Bispecific Antibody by Protein Trans-Splicing (BAPTS) to synthesize BsAbs with natural human IgG structure and no chain mispairing. In the method, two antibody fragments carrying different target-specificities are separately expressed in mammalian cells and subsequently fused to form BsAbs by utilizing the trans-splicing property of the split intein Npu DnaE. The hinge region of antibody, a region with less functional impact, is selected for conjugating the two fragments. The method involves the following steps: (i) constructing five plasmids coding antibody components; (ii) separately expressing and purifying two antibody fragments A and B. Fragment A contains one Fab, “Knobs-into-Holes” mutations in the CH3 domain and NPU DnaEC. Fragment B contains another Fab and NPU DnaEN; (iii) mixing of fragments A and B under permissive reducing conditions in vitro to enable trans-splicing reaction; (iv) removing the reductant to allow re-oxidation of disulfide bonds; (v) isolating BsAb product from unreacted precursors by affinity chromatography. The method allows correct assembly of two heavy and two light chains to form bispecific IgG antibodies in natural structure with no synthetic linkers. No chain mispairing was observed in the product by UPLC-MASS. In addition, the observed kinetics and low reaction activation energy confirmed that the trans-splicing is thermodynamically favored reaction. The BAPTS technology is feasible for industrial applications.

Accelerated pharmaceutical protein development with integrated cell free expression, purification, and bioconjugation

The use of living cells for the synthesis of pharmaceutical proteins, though state-of-the-art, is hindered by its lengthy process comprising of many steps that may affect the protein’s stability and activity. We aimed to integrate protein expression, purification, and bioconjugation in small volumes coupled with cell free protein synthesis for the target protein, ciliary neurotrophic factor. Split-intein mediated capture by use of capture peptides onto a solid surface was efficient at 89–93%. Proof-of-principle of light triggered release was compared to affinity chromatography (His6 fusion tag coupled with Ni-NTA). The latter was more efficient, but more time consuming. Light triggered release was clearly demonstrated. Moreover, we transferred biotin from the capture peptide to the target protein without further purification steps. Finally, the target protein was released in a buffer-volume and composition of our choice, omitting the need for protein concentration or changing the buffer. Split-intein mediated capture, protein trans splicing followed by light triggered release, and bioconjugation for proteins synthesized in cell free systems might be performed in an integrated workflow resulting in the fast production of the target protein.

Cell-Based Biosensors Based on Intein-Mediated Protein Engineering for Detection of Biologically Active Signaling Molecules.

Live-cell-based biosensors have emerged as a useful tool for biotechnology and chemical biology. Genetically encoded sensor cells often use bimolecular fluorescence complementation or fluorescence resonance energy transfer to build a reporter unit that suffers from nonspecific signal activation at high concentrations. Here, we designed genetically encoded sensor cells that can report the presence of biologically active molecules via fluorescence-translocation based on split intein-mediated conditional protein trans-splicing (PTS) and conditional protein trans-cleavage (PTC) reactions. In this work, the target molecules or the external stimuli activated intein-mediated reactions, which resulted in activation of the fluorophore-conjugated signal peptide. This approach fully valued the bond-making and bond-breaking features of intein-mediated reactions in sensor construction and thus eliminated the interference of false-positive signals resulting from the mere binding of fragmented reporters. We could also avoid the necessity of designing split reporters to refold into active structures upon reconstitution. These live-cell-based sensors were able to detect biologically active signaling molecules, such as Ca2+ and cortisol, as well as relevant biological stimuli, such as histamine-induced Ca2+ stimuli and the glucocorticoid receptor agonist, dexamethasone. These live-cell-based sensing systems hold large potential for applications such as drug screening and toxicology studies, which require functional information about targets.

Improved protein splicing using embedded split inteins.

Naturally split inteins mediate a traceless protein ligation process known as protein trans-splicing (PTS). Although frequently used in protein engineering applications, the efficiency of PTS can be reduced by the tendency of some split intein fusion constructs to aggregate; a consequence of the fragmented nature of the split intein itself or the polypeptide to which it is fused (the extein). Here, we report a strategy to help address this liability. This involves embedding the split intein within a protein sequence designed to stabilize either the intein fragment itself or the appended extein. We expect this approach to increase the scope of PTS-based protein engineering efforts.

Split2 Protein-Ligation Generates Active IL-6-Type Hyper-Cytokines from Inactive Precursors.

Trans-signaling of the major pro- and anti-inflammatory cytokines Interleukin (IL)-6 and IL-11 has the unique feature to virtually activate all cells of the body and is critically involved in chronic inflammation and regeneration. Hyper-IL-6 and Hyper-IL-11 are single chain designer trans-signaling cytokines, in which the cytokine and soluble receptor units are trapped in one complex via a flexible peptide linker. Albeit, Hyper-cytokines are essential tools to study trans-signaling in vitro and in vivo, the superior potency of these designer cytokines are accompanied by undesirable stress responses. To enable tailor-made generation of Hyper-cytokines, we developed inactive split-cytokine-precursors adapted for posttranslational reassembly by split-intein mediated protein trans-splicing (PTS). We identified cutting sites within IL-6 (E134/S135) and IL-11 (G116/S117) and obtained inactive split-Hyper-IL-6 and split-Hyper-IL-11 cytokine precursors. After fusion with split-inteins, PTS resulted in reconstitution of active Hyper-cytokines, which were efficiently secreted from transfected cells. Our strategy comprises the development of a background-free cytokine signaling system from reversibly inactivated precursor cytokines.

In-cell production of a genetically-encoded library based on the θ-defensin RTD-1 using a bacterial expression system

We report the high-yield heterologous expression of bioactive θ-defensin RTD-1 inside Escherichia coli cells by making use of intracellular protein trans-splicing in combination with a high efficient split-intein. RTD-1 is a small backbone-cyclized polypeptide with three disulfide bridges and a natural inhibitor of anthrax lethal factor protease. Recombinant RTD-1 was natively folded and able to inhibit anthrax lethal factor protease. In-cell expression of RTD-1 was very efficient and yielded ≈0.7mg of folded RTD-1 per gram of wet E. coli cells. This approach was used to generate of a genetically-encoded RTD-1-based peptide library in live E. coli cells. These results clearly demonstrate the possibility of using genetically-encoded RTD-1-based peptide libraries in live E. coli cells, which is a critical first step for developing in-cell screening and directed evolution technologies using the cyclic peptide RTD-1asa molecular scaffold.

Efficient generation of bispecific IgG antibodies by split intein mediated protein trans-splicing system

Many methods have been developed to produce bispecific antibodies (BsAbs) for industrial application. However, huge challenges still remain in synthesizing whole length BsAbs, including their assembly, stability, immunogenicity, and pharmacodynamics. Here we present for first time a generic technology platform of generating bispecific IgG antibodies, “Bispecific Antibody by Protein Trans-splicing (BAPTS)”. Different from published methods, we assembled two parental antibody fragments in the hinge region by the protein trans-splicing reaction of a split intein to generate BsAbs without heavy/heavy and light/heavy chain mispairing. Utilizing this simple and efficient approach, there have been several BsAbs (CD3×HER2, CD3×EGFR, EGFR×HER2) synthesized to demonstrate its broad applicability. Correctly paired mAb arms were assembled to form BsAbs that were purified through protein A affinity chromatography to demonstrate industrial applicability at large scale. Further, the products were characterized through physical-biochemistry properties and biological activities to confirm expected quality of the products from “BAPTS”. More importantly, correct pairing was confirmed by mass spectrum. Proof-of-concept studies with CD3×HER2 BsAb (T-cell recruitment) demonstrated superior bioactivity compared with trastuzumab. The results of undetectable mispairing and high biological activity have indicated that this method has the potential to be utilized to manufacture BsAbs with high efficiency at industrial scale.