Protective Gloves Research Articles

Cytotoxicity of Aspergillus Section Fumigati Isolates Recovered from Protection Devices Used on Waste Sorting Industry.

Safe working conditions must be guaranteed during waste sorting, which is crucial to maximizing recycling and reuse, in order to minimize workers’ exposure to chemical and biological hazards. This study determines the contribution of Aspergillus section Fumigati to the overall cytotoxicity of filtering respiratory protection devices (FRPD) and mechanic protection gloves (MPG) collected in 2019 from different workstations in one waste sorting industry in Portugal. The cytotoxicity of 133 Aspergillus section Fumigati isolates was determined as IC50 in human A549 epithelial lung cells and swine kidney cells, using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Aspergillus section Fumigati cytotoxicity results were compared with previous total cytotoxicity data from FRPD and MPG samples. A significant correlation was detected between the total cytotoxicity of samples and cytotoxicity of Aspergillus section Fumigati isolates in A549 cells (rS = −0.339, p = 0.030). The cytotoxicity of Aspergillus section Fumigati isolates explained 10.7% of the total cytotoxicity of the sample. On the basis of the comparison of cytotoxicity levels, it was possible to determine the contribution of Aspergillus section Fumigati isolates for the total cytotoxicity of protection devices used in the waste sorting industry. The results support in vitro toxicology as a relevant approach in risk assessments regarding cytotoxicity in passive sampling, and thus, useful in determining the contribution of relevant microbial contaminants to overall cytotoxicity. This approach can provide valuable answers in dose/response studies, and support innovations in risk characterization and their translation into occupational policies.

Review of the Performance, Selection, and Use of Gloves for Chemical Protection

Skin is a potential route for occupational exposure to chemical agents, which can result in serious injury or illness. The selection of gloves and other chemical protective clothing (CPC) to protect against exposure to hazardous chemicals begins with an informed risk assessment and management approach, which relies on the science and art of glove selection. The science of glove selection includes a fundamental understanding of the limitations of gloves and other CPC, job hazard analyses to identify the hazards posed by specific tasks, choosing from a hierarchy of controls, familiarity with the relevant resources to guide selection, and, in some cases, additional glove performance testing and/or consultation with a qualified occupational and environmental safety and health professional. The art of glove selection includes important considerations, such as ease of use, comfort, cost, and acceptance by workers. Finally, a well-managed personal protective equipment (PPE) program incorporating periodic review, training, supervision, and documentation is critical to protecting workers from occupational injury or illness.

Experimental Evaluation of Personal Protective Equipment for Drones and OHSMS

Unmanned Aerial Vehicles, or drones, are expected as a next industry and several developments are carried over the world. For the indoctrination, safety aspects are indispensable. In this paper, experimental evaluations for protective gloves and eyewears are reported. The effectiveness of existing safety standards related to these protective gloves and eyewears are discussed based on the experimental results. For safety management issue, Safety Management System(SMS) framework for aeronautical industry and Occupational Health and Safety Management System(OHSMS) for general industries are compared based on the related standard documents. The comparison indicates that both SMS and OHSMS have similar requirements. The development of safety standard of drone Personal Protective Equipments(PPEs) and detail comparison of SMS and OHSMS are further issues. When preparing the manuscript, read and observe carefully this sample as well as the instruction manual for the manuscri

Characterization of occupational exposure to pesticides and its impact on the health of rural women

Objective: To characterize the profile of occupational exposure to pesticides and its impact on women’s health. Method: This is a prospective and descriptive study with a quantitative approach. The study population included all patients attended at Francisco Beltrao Cancer Hospital (Ceonc) from May 2015 to December 2018 (n=315). The characterization of their exposure profile was obtained through an interview using a form applied by trained researchers contained 60 questions related to women’s pesticide exposure and their health status. The questions referred to past and current occupational pesticide exposure profile, intoxication, and health history from women and their families. All collected data were analyzed in the Statistical Package for the Social Sciences package (SPSS 25.0). Results: A total of 265 individuals (84.2%) have lived some part of their life in the countryside, and 70% were categorized as occupationally exposed to pesticides. Most of them (57%) were directly exposed, mainly by washing pesticide-contaminated clothes and personal protective equipment used in pesticide pulverization without glove protection. Cancer cases in the family were the main disease reported (68.3%). Further, 57% of interviewed women had a breast cancer diagnosis but no significance between breast cancer occurrence and pesticide exposure was observed. Conclusion: The form allowed us to characterize the profile of occupational pesticide exposition in rural women, alerting them to their severe contamination. This approach can be useful to characterize the occupational exposure profiles of rural workers living in other rural regions of Brazil that use pesticides.

SKIN FEATURES IMPORTANT FOR THE OCCURRENCE OF CONTACT DERMATITIS IN HEALTHCARE WORKERS.

The occurrence of skin lesions in healthcare workers is associated with a negative impact on important skin functions, including protection from mechanical injuries, sunlight, dehydration, and penetration of chemical substances or pathogenic microorganisms. In healthcare professionals, the most common occupational skin disease is contact dermatitis (CD), either irritant (ICD) or allergic (ACD), and typically on the hands. ICD accounts for about 80% of occupational CD, making it the most frequent cause. According to the literature, CD frequency is higher among healthcare professionals than other occupations, with critical occupational risk factors including contact with irritants and allergens at the workplace. Furthermore, ICD is a multifactorial disorder influenced by many constituent and environmental factors. Constituent factors include age, gender, body location, atopy, and genetic factors, while environmental factors include temperature, airflow, humidity, and occlusion. Commonly encountered irritants are water, detergents and surfactants, solvents, oxidizing agents, acids, and alkalis; however, use of protective gloves or equipment, hand-washing habits, use of cleansers and creams, active inflammatory skin diseases, and daily activities are also important for ICD onset. Additionally, ICD is known to predispose to ACD. Important risk factors for ACD development include occupation, age, history of atopic dermatitis, genetics, female gender, and fair skin phototype. In summary, numerous skin features and other occupation-related factors contribute to CD among healthcare practitioners. Given the high level of exposure to contact irritants/allergens in the healthcare setting, implementation of preventive measures is crucial for a safer work environment.

Enhanced Hydrofobicity of Polymers for Personal Protective Equipment Achieved by Chemical and Physical Modification.

The article presents significant results in research on creating superhydrophobic properties of materials which can be used as an interesting material for use in self-cleaning polymer protective gloves and similar applications where the superhydrophobicity plays a significant role. In this work the influence of laser surface modification of MVQ silicone rubber was investigated. The research was conducted using a nanosecond-pulsed laser at 1060 nm wavelength. After a process of laser ablation, the surface condition was examined using a SEM microscope and infrared spectroscopy. During the tests, the contact angle was checked both before and after the laser modification of samples pre-geometrised in the process of their production. The test results presented in the paper indicate that the chemical and physical modifications contribute to the change in the MVQ silicone rubber contact angle. A significant increase (by more than 30°) in the contact angle to 138° was observed. It was confirmed that surface geometrisation is not the only factor contributing to an increase in the contact angle of the analyzed material; other factors include a change in laser texturing parameters, such as mean beam power, pulse duration, scanning speed and pulse repetition frequency.

Antimicrobial sustainable biopolymers for biomedical plastics applications – an overview

The Covid-19 pandemic has increased the need for personal protective equipment (PPE), especially for medical personnel: face masks, full protective clothing, gloves and goggles. To date, they are usually made of thermoplastic polymers, such as polypropylene (PP). To reduce the risk of secondary infections it is essential to enhance the antimicrobial (especially antibacterial and antiviral) properties of the materials used in PPE. There are some attempts to modify materials by, for example, silver nanoparticles or zinc oxides. The increasing demand for personal protective equipment, mostly masks, leads to an increase of environmental problem of non-biodegradable wastes. Therefore some researches on use of safer for user’s health sustainable antimicrobial and biodegradable biopolymer fibers, such as cellulose, starch, chitosan, poly(lactic acid) (PLA) or poly(glycolic acid) (PGA), have been done. These biopolymers and their properties are discussed in this article.

How to build trust: Evidence from Thai customers in the latex glove industry

This paper examined the impact of product quality, perceived risk, and perceived value on customer trust in the latex glove industry of Thailand. It used a structural equation model (SEM) to analyze the association between two or more variables. Data collection was conducted in Thailand during the pandemic of COVID-19. Five hundred people looking for glove protection were invited to join the survey; however, only 384 provided responses were valid enough for the data analysis. According to the empirical results of this study, product quality demonstrated significant and positive impacts on perceived value and trust. In addition, perceived value acted not only as a significant and positive predictor of customer trust but also as a partial mediator between product quality and customer trust. On the other hand, the current results demonstrated that perceived risk had little impact on perceived value and trust, while product quality was the primary benefit for increasing perceived value and trust among customers. Thus, ambiguity among customers was unlikely to demonstrate any serious concern for customer value and trust. Overall, customer trust relied significantly on perceived value through increased product quality. AcknowledgmentThis study was supported by Internal Research Grant Funding of Academic year 2021, Hatyai University and Postdoctoral Fellowship, Prince of Songkla University.

Increased personal protective equipment litter as a result of COVID-19 measures

Use of personal protective equipment (PPE) increased during the COVID-19 pandemic to reduce virus transmission. Here, we quantitatively analyse emergence of PPE and COVID-19-related litter over 14 months for 11 countries using the litter collection application Litterati. The proportion of masks in litter increased by >80-fold as a result of COVID-19 legislation, from <0.01% to >0.8%. Gloves and wipes, more prevalent at ~0.2% of litter before the pandemic, doubled to 0.4%, but this has since fallen. Glove litter increased in the initial stages of the pandemic but fell after the introduction of facemask policies, whereupon there was an increase of facemask litter. National COVID-19 policy responses and international World Health Organization announcements and recommendations are a probable driver of PPE litter dynamics, especially the implementation of facemask policies. Waste management should be incorporated in designing future pandemic policies to avoid negative environmental legacies of mismanaged PPE. The COVID-19 pandemic substantially altered consumption patterns, especially for health supplies such as personal protective equipment, including masks and gloves. This study of 11 countries examines both the rate and types of litter being discarded as a result of changing policies and recommendations during the first 14 months of the pandemic.

Effect of wheelchair configurations on shoulder movements, push rim kinetics and upper limb kinematics while negotiating a speed bump

This study aimed to provide a comprehensive assessment of upper limb kinetics and kinematics and shoulder movements during wheelchair propulsion while negotiating a speed bump of 6 cm height using four different wheelchair configurations. 16 healthy males aged 30.8 ± 5.7 years participated in the experiment. The kinetic and kinematic data during wheelchair propulsion were recorded. A smart system was used to collect the push forces and a motion capture system was used to collect upper limb movements. The results show that approximately 50% more pushing force was required to negotiate the speed bump than that of level ground propulsion. At the upward-forward axle position, peak total forces were 95.17 ± 5.70 N which resulted in significantly improved propulsion ergonomics, but 129.36 ± 6.68 N was required at the upward-back axle position at the speed bump push. The findings could help manufactures to design protective gloves for wheelchair users and provide useful rehabilitation information to clinicians and patients. Practitioner summary: This study investigated pushing forces and movements during wheelchair propulsion over a speed bump. Approximately 50% more pushing force was required to negotiate the bump than a level surface propulsion. The upper-forward axle position was found to be reasonably better than other positions during wheelchair propulsion. Abbreviations: UF: upper and forward position; UB: upper and back position; DF: down and forward position; DB: down and back position; ROM: range of motion

Effects of Composite Coatings Functionalized with Material Additives Applied on Textile Materials for Cut Resistant Protective Gloves.

The objective of the present work was to evaluate the effects of different types of particles added to a polymer paste applied onto a textile carrier on the cut resistance of the resulting material. Knitted aramid textile samples were coated in laboratory conditions using a polymer paste that was functionalized with 12 types of reinforcing particles of different chemical compositions and size fractions. Cut resistance was tested in accordance with the standard EN ISO 13997:1999 and the results were subjected to statistical analysis. The effects of additive particles on the microstructure of the polymeric layer were assessed by means of scanning electron microscopy. The type and size of the particles affected the cut resistance of the functionalized knitted fabric. They were also found to change the morphology of the porous structure. Composite coatings containing the smallest additive particles exhibited the best cut resistance properties.

Real Bodies Not Required? Placebo Analgesia and Pain Perception in Immersive Virtual and Augmented Reality

Pain represents an embodied experience, wherein inferences are not only drawn from external sensory inputs, but also from bodily states. Previous research has demonstrated that a placebo administered to an embodied rubber hand can effectively induce analgesia, providing first evidence that placebos can work even when applied to temporarily embodied, artificial body parts. Using a heat pain paradigm, the present study investigates placebo analgesia and pain perception during virtual embodiment. We examined whether a virtual placebo (a sham heat protective glove) can successfully induce analgesia, even when administered to a virtual body. The analgesic efficacy of the virtual placebo to the real hand (augmented reality setting) or virtual hand (virtual reality setting) was compared to a physical placebo administered to the own, physical body (physical reality setting). Furthermore, pain perception and subjective embodiment were compared between settings. In this mixed design experiment, healthy participants (n = 48) were assigned to either an analgesia-expectation or control-expectation group, where subjective and objective pain was measured at pre- and post-intervention time points. Results demonstrate that pre-intervention pain intensity was lower in the virtual reality setting, and that participants in the analgesia-expectation group, after the intervention, exhibited significantly higher pain thresholds, and lower pain intensity and unpleasantness ratings than control-expectation participants, independent of the setting. Our findings show that a virtual placebo can elicit placebo analgesia comparable to that of a physical placebo, and that administration of a placebo does not necessitate physical bodily interaction to produce analgesic responses. PerspectiveThis study demonstrates that a virtual placebo treatment, even when administered to a virtual body, can produce placebo analgesia. These findings indicate that the efficacy of a virtual placebo is comparable to that of a physical placebo, which could pave the way for effective new non-pharmacological approaches for pain management.

Suberosis at Public Health Unit (PHU) of Santa Maria da Feira/Arouca (F/A) (Portugal)

Abstract Introduction Santa Maria da Feira (SMF) is currently one of the largest producers of cork in Portugal. Suberosis is an occupational disease of workers in the cork processing industry, associated with repeated exposure to moldy cork dust, usually presenting itself as a disease of the pulmonary interstitium (Hypersensitivity Pneumonitis). This study aims to assess the impact of occupational health interventions on the cork industry, in terms of health promotion and risk prevention. Methods We assessed 10 different cork companies distributed in 10 parishes of SMF. Results With regard to health promotion, we highlight the development of healthy workplaces and the strong commitment to training health professionals with regard to the correct use of personal protective equipment (PPE). Regarding the prevention of risks, emphasis is placed on the two areas that imply greater professional risks: storage and the process of drilling and boring. The storage of cork is done most of the time in dark and humid places, providing ideal conditions for the development of mold and the process of drilling and boring exposes workers to large amounts of moldy cork dust. In these settings, investing in PPE namely protective gloves and mask, as well as collective prevention measures, namely effective ventilation systems and regular control of humidity conditions, are essential to health protection of workers. Conclusions SMF has a prevalence of Suberosis well above the national average. In order to respond to this issue, the cork industry must reinforce the investment in terms of PPE, with the use of uniform, cuffs, safety shoes and visor, variable with the specific production process. In terms of collective protection, the signaling of the main hazards and the information available in the workstations regarding mandatory/recommended PPE, isolation of the areas with the most dangerous tasks as well as the maximum possible turnover between tasks are essential in terms of Occupational Health. Key messages Suberosis is an occupational disease of workers in the cork industry, associated with repeated exposure to moldy cork dust, usually presenting itself as a disease of the pulmonary interstitium. The development of healthy workplaces, the correct use of PPE and the investment in effective ventilation systems and control of humidity, are essential to health protection of cork workers.

An empirical investigation of firefighting personal protective equipment and burn injuries in Korea.

This study aimed to investigate the current situation of firefighting burn injuries and personal protective equipment (PPE) in Korea using a questionnaire. A questionnaire was constructed and then distributed to fire stations via the Fire & Disaster Headquarters of Korea. Responses from a total of 536 firefighters who were currently responsible for suppressing fire or doing rescue work were analysed (39.2 ± 8.58 y in age, 173.8 ± 5.0 cm in height, 73.4 ± 8.9 kg in body weight). The results showed that 22% of firefighters had experienced burns but of these 93% of were burns of less than 1% of total body surface area. The most common body site of burn injury was the hands (37%) and the head (face and neck) (34%). There were significant relationships between PPE non-compliance and career years, especially for the hood and boots. According to firefighters their gloves were the most vulnerable part of their PPE. We also elucidated relationships between the body sites most vulnerable to burn injuries and PPE wear compliance by item. The present results suggest that officially-undisclosed minor burn injuries but prevailing among firefighters can be reduced through improving firefighters’ protective helmet, hoods and gloves.

Investigation of a Highly Pathogenic Avian Influenza Outbreak in a Poultry Farm, Dhamrai, Bangladesh, 2017: a One Health Approach

In January 2017, a highly pathogenic avian influenza (HPAI) A virus killed 732 chickens in a farm in Dhamrai, Bangladesh. An investigation assessed transmission of the virus from chickens to farmworkers. Contacts were farmworkers with direct exposure to affected chickens. We interviewed all suspected cases, conducted an active case finding for human cases at the implicated farm and local clinics, and actively searched for carcasses of wild and domestic birds within two kilometers of the implicated farm. All contacts were asymptomatic and had buried dead poultry; 70% touched dead poultry and 29% used protective gloves while working. Nasal and throat swabs were negative for influenza A and B viruses (subtyped for M-gene positive influenza A viruses by PCR and seasonal H3, H1N1 pdm09, and avian H5/H7/H9). The virus was probably introduced to the farm when ducks from the farm were taken to a live bird market and unsold ducks were returned to the farm. While farmworkers were exposed to the infected chickens, there was no evidence of the virus being transmitted to workers. We recommend starting H5N1 surveillance in live bird markets to monitor HPAI.

Experimental Investigation of the Wettability of Protective Glove Materials: A Biomimetic Perspective

Abstract The objective of the present work was to evaluate the surface wettability of commercially available polymeric protective gloves, as well as to determine the effects of their surface topography in conjunction with the glove material on the hydrophobic properties of the final products, together with surface free energy (SFE) and work of adhesion. The geometric structures imparted to the surface led to different levels of hydrophobicity and SFE. Most of the studied materials were characterized by good wettability properties. It was shown that a textured surface topography affects wettability. The highest SFE was found for nitrile butadiene rubber materials. All materials except for nitrile butadiene rubber exhibited good hydrophobic properties and relatively low work of adhesion.

Preliminary results of hand arm vibration (HAV) exposures of chipping hammer operators in tropical weather: Analysis of exposures and protective gloves

Objectives of this study are to analyze the HAV exposures of chipping hammer operators from field measurements and to investigate the potential of various types of gloves in reducing the exposures. HAV exposures of twelve male operators were measured at four different operating conditions: bare hand, wearing normal workman gloves, wearing heavy workman gloves and wearing vibration reducing gloves. From the measurements, 8 h exposure values were determined and assessed against standards. The total vibration values were determined and effectiveness in vibration attenuation by gloves was compared. It was found that all most all operators, HAV exposure levels exceeded the exposure action value (EAV) and about 83% of the operators exceeded the exposure limit values (ELV). A reduction in the total vibration magnitude was observed with protective gloves: 8.3% with normal workman gloves, 14.6% with heavy workman gloves and 40% with vibration-reducing gloves. To confirm the effectiveness of the vibration reducing gloves, further field investigations are required with simultaneous measurements by considering parameters affecting HAV (i.e., hand forces and postures).

Evaluation of plasticizers from protective gloves: determination of the content of plasticizers in vinyl gloves and in vitro toxicity studies on microvascular endothelial cells

Evaluation of plasticizers from protective gloves: determination of the content of plasticizers in vinyl gloves and in vitro toxicity studies on microvascular endothelial cells

Preliminary Research: Validation of the Method of Evaluating Resistance to Surface Wetting with Liquid of Protective Materials Intended for Polymer Protective Gloves.

The article presents validation argumentation of the novel method of evaluating resistance to surface wetting with different liquids of protective materials intended for polymer protective gloves based on the three parameters: water permeability index, non-wettability index and absorption index. Using our own method of evaluating resistance to surface wetting, it was shown that the knurled structure of the palm part of polymer protective gloves may inhibit transport of harmful and hazardous liquids outside the area of the protective glove. Currently, there is lack of objectifying methods for evaluation of surface wettability focused on the mentioned aspects. In view of the above facts, an original method for evaluating the resistance of protective materials to surface wetting with mineral oils and water has been invented and validated. It was assumed that the non-wettability index will be subjected to metrological analysis. Consequently, the validation process refers to this index. A precise assessment of the uncertainty budget of the individual components was obtained. On the basis of the obtained results, the measurement errors that may affect the quality and reliability of the test result performed in the laboratory were identified.

Analysis of Phthalates and Alternative Plasticizers in Gloves by Gas Chromatography-Mass Spectrometry and Liquid Chromatography-UV Detection: A Comparative Study.

Gloves represent an essential feature for hand protection because it is a requirement in the professional framework to comply with both hand hygiene standards and the principles of good laboratory practice. Despite their wide use, there is a knowledge gap regarding their composition, including phthalates. The purpose of the present study was to develop two orthogonal methods, GC–MS and HPLC–DAD, for the screening of plasticizers in gloves. Performances of these two methods were compared in terms of ease of use, number of analyzed plasticizers, and sample preparation. The two methods were validated and applied for the identification and quantification of plasticizers in ten gloves made with different materials (vinyl, nitrile, latex, and neoprene). Results revealed the presence of three main ones: DEHP, DEHT, and DINP. Additionally, the contents of plasticizers were extremely variable, depending on the glove material. As expected, the results point out a predominant use of plasticizers in vinyl gloves with an amount that should be of concern. While DEHP is classified as a toxic substance for reproduction 1B, it was, however, quantified in the ten different glove samples studied. This study provides new data regarding the plasticizers’ content in protective gloves, which could be useful for risk assessment.