Prosthodontics Course Research Articles

Utilizing 3D Model and Comparison Software Tools in Improving Assessment Methods: A Pilot Study

Purpose/Objectives: This manuscript investigates the effectiveness of computer-assisted design and manufacturing (CAD/CAM) technology in preclinical dental education. The COVID-19 pandemic created a need for remote teaching approaches. In preclinical fixed prosthodontics courses, traditional evaluation methods rely on faculty to visually grade laboratory projects utilizing rubrics and 2D images. Assessment and feedback vary amongst faculty, and faculty calibration has been inconsistent in reducing intra-and inter-rater variability. This study aimed to compare faculty assessment of student full coverage crown (FCC) preparations traditionally versus digitally through 3D model visual assessment and/or comparative analysis software reports. Methods: Eighteen UTHealth Houston School of Dentistry faculty participated, each randomly assigned into one of three assessment groups: traditional visual Group (TV), 3D Group (3D), and 3D visual assessment supplemented with comparative analysis software report (3D+) Group. Faculty graded the same eight lithium disilicate typodont preparations for all three assessment groups. Results: Survey results showed the ease of use and efficiency among the three assessment methods varied significantly. Grading scores revealed that axial wall reduction significantly differed among the three assessment methods. Conclusion: This study concludes that the combination of the two digital assessment methods can overcome the limitations of traditional evaluation methods and digital methods alone by providing objective feedback to students and enhancing their learning experience.

Comparison of digitally assessed quality of posterior crown preparations performed with and without previous practice on patient-specific three-dimensional-printed teeth models.

Three-dimensional (3D)-printing technology can provide customizable simulations, but its effects on patient care quality have not been well studied. This study aimed to assess the impact of practicing with patient-specific 3D-printed teeth models on the quality of patients' dental preparations performed by students transitioning to clinical training. Accordingly, the quality of posterior crown preparations was evaluated by objectively analyzing digital scans and grades in two groups: the study group, which practiced beforehand with patient-specific 3D-printed teeth models, and the control group, which did not practice with these models. All 78 fourth-year dental students who had just finished their fixed prosthodontics course at the simulation laboratory with training on phantom heads and without previous clinical experience in crown preparations were invited to participate in the study. Sixty-eight agreed to take part and were randomly divided into a study group that practiced crown preparations on 3D-printed models of their own patient's teeth and a control group that did not practice with 3D-printed models and started their clinical work straightforwardly after simulation training. Students completed validated perception questionnaires on self-confidence and clinical skills before and after the protocol, which were compared using a chi-squared test. Crown preparations performed on 3D-printed models and then on patients were digitally scanned and objectively graded by prepCheck software for critical parameters, such as undercuts, taper, and occlusion reduction. Non-parametric tests were used to compare preparations on 3D-printed models and on patients performed by the study group and those on patients made by the control group. Initially, both groups reported similar perceptions of self-confidence and clinical skills levels. The study group significantly improved both aspects after the protocol. Analysis of the scanned preparations demonstrated that the study group removed less tooth structure from actual patients than from the initial 3D-printed models. In contrast, the control group showed excess occlusal clearance in their patients compared to the study group. Practicing patient-specific 3D-printed teeth before performing procedures clinically appears to enhance preparation quality and minimize unnecessary tooth reduction in early clinical experiences.

VR-haptic and phantom head dental training: Does the order matter? A comparative study from a preclinical fixed prostho-dontics course.

Learning tooth preparation techniques and the finesse required is an important part of preclinical dental education. Being able to practice surgical skills without loss of Frasaco® teeth while being provided with performance analysis data is a boon to students and educators. We investigated the combination of haptics-enhanced virtual reality (Simodont®) and conventional phantom head practice in a preclinical dental course, evaluating the students' performances and perceptions. Forty students were randomized into two groups: Group One began within a VR-haptic setting while Group Two worked with Frasaco® teeth. Halfway through the course the scenarios were switched. A crown preparation test on Frasaco® teeth was conducted at the end of the course. Students' performances and satisfaction were assessed anonymously. Analysis of the students' performances included clinical metrics (occlusal and axial reduction, convergence angle, damage to adjacent teeth). The perceived usefulness of VR-haptic and phantom head simulations was assessed. In Group One, the tooth preparation metrics were more in line with the requested parameters compared to Group Two. All students ranked VR-haptics highly regarding manual dexterity improvement. In conclusion, this study shows that by combining VR-haptics with conventional dental procedures, it is possible to improve important preparation metrics in fixed prosthodontics tooth preparation.

Modular training model for education of students in restorative and prosthodontic dentistry.

At the moment, no commercial model solution is available for the individualisation of the dentition depending on the clinical case scenario. Furthermore, the realistic training of most restorative and prosthodontic procedures on a single dental study model is not possible. The aim of this study was the creation of a new training model to fill this gap. Complete upper and lower jaw models were created based on existing scans and radiological data from a patient. All components for 100 complete models and 1128 teeth for the training were produced with a SLA-printer. Overall, 94 voluntary students attending the first and second preclinical course in prosthodontics tested the functionality of the model with three different tooth types against a standard dental study model and real teeth. After the training, the model was rated in a questionnaire. The production of the models and teeth was feasible. The overall rating of the different teeth was worse for type I (Ø 3.6 ± 1.1), significantly better for type II (Ø 2.5 ± 1.0) and type III (Ø 2.4 ± 1.0) than a standard typodont tooth (Ø 2.7 ± 1.1). The new model was rated significantly better overall (Ø 2.6 ± 1.0) than the standard training model (Ø 3.0 ± 1.1). The aim of this study was fulfilled. A superior training model was created with equivalent and better tooth types. The new teeth were outstanding in terms of cost-efficiency, appearance and feeling during preparation.

Implementation of mind mapping with problem-based learning in prosthodontics course for Chinese dental students

BackgroundThe traditional Chinese dentistry classroom teaching model focuses on the instruction of knowledge details, but less on the frameworks and learners’ motivation. Here, we introduced a combination of mind mapping and PBL instruction (MBL)into the prosthodontics course for Chinese dental students. This study aimed to evaluate the effectiveness and efficiency of MBL in prosthodontics and make observations from the students’ perspectives, based on their response with the learning process.MethodsWe prospectively enrolled 56 fourth-year undergraduates of stomatology, and these participants were randomly allocated into either the combined mind map teaching group (MBL) or the problem-based learning group (PBL) to attend the prosthodontics course. An anonymous questionnaire was also administered to both groups to evaluate the students’ perceptions and experiences, using closed and open-ended items. Data were analyzed using descriptive statistics and thematic analysis.ResultsThe students’ responses to closed items indicate their experience in PBL and MBL to be positive, including increased motivation, improved memory of knowledge, enhanced discipline connection and raised teamwork, with fairly higher ratings for the MBL group. However, the tutor-guided competence scores including the memory and framework part, were significantly higher for MBL group than PBL group (two-way ANOVA, p < 0.01, p < 0.001, respectively). Meanwhile, the self-perceived competence scores including the motivation, framework and teamwork part, were significantly higher for MBL group than PBL group (two-way ANOVA, p < 0.01, p < 0.001, p < 0.05, respectively).ConclusionOur findings suggest that MBL teaching approach can help in integration of knowledge structure and enhance clinical reasoning. MBL is an effective and well-organized method in prosthodontics course for dental students.

Assessment and evaluation of a serious game for teaching factual knowledge in dental education

ObjectivesA serious game application was developed to train factual knowledge and for self-assessment. The aim of the present study was to compare the effects of a game application (intervention group) or paper scripts (control group) on knowledge acquisition and to evaluate the acceptance of the new application among dental students.MethodsThe 4th semester students of the second preclinical prosthodontics course were randomly assigned to one of the two groups (n = 58/51) for two consecutive years. The study was conducted in two phases: First, all participants took a pretest, with the intervention group using the game application and the control group receiving the same set of questions in a paper script. In the second phase, all participants took a post-test. After the post-test, both groups had access to the application for another three weeks. After that, all participants completed standardized questionnaires and a scale to evaluate the usability of the system. Usage statistics were also tracked. Differences between groups were evaluated together and for both years separately in terms of pretest and posttest scores and learning success.ResultsThere was no significant difference between the groups with regard to the posttest and learning success. A significant improvement in knowledge between pretest and posttest (p < 0.05) was demonstrated in both groups. Each student played approximately 350 questions. Participants rated the application with the German school grade "good". Participants appreciated the application and rated it positively. They stated that the game motivated them to learn and that they spent more time with the learning content.ConclusionDue to the positive perception achieved through the game, this application is able to motivate students to learn. The learning effect achieved is similar to learning on paper.

Current Trends in Fixed Prosthodontics Education in Undergraduate Dental Colleges.

The objective of this study was to explore current trends in undergraduate fixed prosthodontics teaching at undergraduate dental level education. This cross-sectional descriptive study included close-ended questions to inquire about the teaching practices of fixed prosthodontics at Bachelor of Dental Surgery level education. Electronic copies of the survey forms were sent to the heads or directors of department of prosthodontics responsible for undergraduate dental students teaching and learning in various institutes of Sindh by the help of Google forms in December 2020. The form included questions on sociodemographic details and questions inquiring the theoretical and clinical teaching practices in undergraduate fixed prosthodontics course. Data was entered and analyzed using SPSS 25. Frequency distribution and percentages of categorical variables were recorded. Out of total 18 dental institutes of Sindh, 15 returned the completely filled form, giving a response rate of 83.3%. Seven (46.7%) schools teach various fixed prosthesis in the preclinical years to their students. All 15 colleges carry out didactic teaching and provide exposure by live clinical demonstrations for various fixed prosthesis. Faculty of 12 (80%) dental colleges where fixed prostheses are being constructed in the dental outpatient department mentioned that their students observe or assist the clinical procedures during their clinical rotation; but none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years. Didactic teaching and live clinical demonstrations of fixed prosthodontics is being carried out in all dental colleges of Sindh. Almost half of the dental schools teach crown preparation on phantom teeth during their preclinical course. Contrary to this, none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years. As these procedures are not included in the current undergraduate curriculum, recommendations should be forwarded to governing educational body of the country to include cases of fixed prosthesis in their skill set prior to their graduation.

Self-assessment and peer-assessment of the psychomotor skills in preclinical prosthodontics: A prospective study.

Students' self-assessment and peer assessments are essential to understand the rubrics criteria and improve their psychomotor skills. The purpose of this study was to assess the impact of self-assessment score (SAS), peer-assessment score (PAS) and teacher assessment score (TAS) on the final scores of the psychomotor skills of dental students in a preclinical fixed prosthodontics course. A prospective study included D2 students in a preclinical fixed prosthodontics course for two consecutive academic years from September 2017 to May 2019. Students' performance of various procedures over 14 sessions was assessed by SAS, PAS and TAS. Repeated-measures ANOVA was used to assess differences between the three scores and control charts showed their change over time. Multivariable linear regression was used to assess the association between two outcome variables: TAS and the total preclinical score and the explanatory variables: SAS, PAS, TAS, gender and GPA. The significance level was set at 5%. SAS had a significantly higher mean (80.21) than TAS (79.32) and PAS (78.58). SAS reached higher levels earlier than TAS and PAS. PAS had a stronger association with TAS than SAS (partial eta squared, η2=0.17 and 0.13), whereas SAS significantly predicted total preclinical score (p < .0001). PAS helped develop the skills of dental students during training, while SAS had an impact on their total preclinical score. Different student-centred activities are needed to support students' preclinical training in fixed prosthodontics courses.

Student perception and assessment outcomes using a pilot condensed format ("boot camp") in a Fixed Prosthodontics course.

The purpose of this study was to assess student perception as well as course outcomes (final written examination grades) when using a pilot condensed format in an undergraduate Fixed Prosthodontics course, which was implemented as a response to the global pandemic of Covid-19. The course was delivered in a condensed format, with a total of 28 direct contact hours in the Simulation Clinic within a 4day period. Asynchronous remote learning was employed for the didactic portion of the course. Students completed surveys before and after the course, to assess their perception of the condensed format, and written examination grades were compared with previous years' grades. Data were entered in an Excel database (Microsoft Excel 2016) and analysed using a statistical analysis software program (IBM SPSS Statistics, v26; IBM Corp). The level of significance was set to α=0.05. Overall, student perception of the condensed format was positive. At the beginning of the course, female students had less confidence in their skills compared to male students (p < .05). Written examination grades were significantly lower compared to previous years' grades (p=.04). The use of a condensed format can allow a course to be delivered in smaller student cohorts and provides the ability to reduce the total number of direct contact hours allotted to the course, creating space within the curriculum. Student perception of this format was generally positive. However, written examination scores were negatively impacted, indicating possible knowledge gaps resulting from the condensed course format. More studies are needed to assess the effect of the various curricular modifications that have been implemented due to the Covid-19 pandemic.

Team-Based Learning in Prosthodontics Courses: Students' Satisfaction.

The goal of this cross-sectional observational study was to assess dental students' satisfaction regarding team-based learning (TBL) methodology in prosthodontics courses taught at College of Dentistry, Princess Nourah bint Abdulrahman University, Saudi Arabia. Undergraduate dental students at second, third, fourth, and fifth years were taught prosthodontics courses through traditional and TBL pedagogies. TBL sessions consisted of preparation, readiness assurance, and application. At the end of each prosthodontics course, the students were asked to complete a self-administered questionnaire that was divided into four sections to assess the effect of TBL on the following parameters: information acquisition, interpersonal skills improvement, classroom environment, and the students-instructors interaction. The responses of the questionnaire followed the Likert scoring method (scaled from 1 to 5). The t-test and ANOVA statistical analyses were performed using SPSS. Results. The response rate to the questionnaire was 86%. There were a significant relationship and correlation between TBL pedagogy and student satisfaction (P values ≤ 0.05) for all levels. The means of the responses for the second and fifth years were 4.36 and 4.56, respectively, where the means for the third and fourth years were 3.54 and 3.59, respectively. The parameter notably affected by TBL was interpersonal skills enhancement. All students strongly agreed that TBL enhances personal flexibility and boosts their self-esteem. Conclusion. Students showed positive perceptions about TBL pedagogy in terms of active engagement, knowledge acquisition, and improvement of interpersonal skills leading to more efficient learning outcome.

Postgraduate student’s perception on preclinical prosthodontics curricula: A web-based survey

This study aimed to determine the current background of teaching pre-clinical prosthodontics for post graduate students. It describes the perception of post graduate students regarding the effectiveness of the preclinical prosthodontic curriculum in preparing them to operate efficiently in the clinical setting.: To assess student’s knowledge and perception of preclinical postgraduate prosthodontics course in different dental colleges of India.: The study sample was obtained from 148 postgraduate student, both male and female, an anonymous questionnaire consisting of 15 questions regarding knowledge, attitude and practice of the preclinical curriculum. This research was conducted after getting permission from the respective authority and consent from all respondents. Data acquired from structured questionnaires were analysed and compared by simple percentage method.After careful assessment and graphical representation of responses acquired from participants, results were formulated. Participants expressed through open ended and closed ended questionnaire that exercises conducted for complete denture prostheses and fixed partial denture prostheses were adequate and preclinical curriculum for implantology and maxillofacial prostheses needs to be streamlined.This paper has found that, while all schools make efforts to ensure that their postgraduate dental students are best prepared for subsequent independent practices, prosthodontic education varies among schools. Although some trends in curricular formats and content are evident. This survey indicated that active and passive learning for preclinical prosthodontics and frequent feedback from students plays a vital role.

Effect of self-assessment in a removable prosthodontics preclinical course on skills and competence.

Self-assessment is increasingly implemented in medical professions' curricula. In this research, the authors measure the effects of self-assessment within a preclinical removable prosthodontics course among dental students in a private dental school according to the European qualifications framework descriptors. Thirty subjects, all fourth-year dental students, were included in this experiment. Fifteen subjects were included in each of the experimental and control groups during one semester. The experimental group subjects used the study roadmap tool in their preclinical tasks. The control group subjects executed the same preclinical tasks under instructor supervision only. All subjects were filmed, and an autonomy score was given to every subject per session. At the end of the semester, cognitive skills development was compared using the Kember etal. questionnaire while practical skills development was compared using a comparison of grades. Two focus groups were undertaken with experimental group subjects. Qualitative and quantitative data were collected and statistically analyzed (p<0.005). Subjects from the experimental group showed development in critical thinking, practical skills, autonomy, and taking responsibility, thus development in the competence level. Implementation of self-assessment within preclinical courses may develop skills and competence among dental students, yet more studies are needed.

New Training Approach for Improving the Spatial Perception and Orientation Ability of Dentistry Students

Introduction: During a basic prosthetics course, dental students train on plastic teeth for fixed partial dentures (FPD). The complexity of manual skill acquisition and the need for extra training led us to develop a portable tool for home training (PhantHome). The aim of the current study was to assess whether training using the portable tool improves students fine motor skill, spatial perception, and orientation and may predict success in preclinical prosthetics courses. Material and Methods: A total of 42 third year dental students were included in this study. A valid dexterity test (Grooved Pegboard test) and a manual test using the portable tool (PhantHome) were conducted in direct and indirect visions using a mirror at two time points: T0: beginning of study, and T1: after training for one month with the portable tool at home. The students’ manual grades in the portable tool, Grooved test, and final prosthetics course grades were compared. Results: The results showed that indirect tasks were significantly more difficult to perform than direct tasks for PhantHome and Grooved tests at T0 and T1 (p &lt; 0.0005). After practicing with the portable PhantHome tool (T1), the students’ scores of in PhantHome and Grooved tests improved significantly (p &lt; 0.04). A regression analysis showed that students’ motor tasks scored at T0 predicted phantom course success in 86.8% of cases (p = 0.005). Conclusion: There was a positive transfer in learning: PhantHome training led to improved performance on the Grooved tests without further training on these tests. Therefore, training in the PhantHome tool can significantly improve performance in the prosthodontics phantom course. The prediction model predicted success in a prosthodontics course with 86% accuracy.

Multilevel factor analysis of flipped classroom in dental education: A 3-year randomized controlled trial.

PurposePrevious studies have rarely attempted to test the confounding factors that may affect learning outcomes of the flipped classroom. The purpose of this study was to assess how flipped classrooms affect the acquisition of knowledge in clinical dental education based on multilevel factor analysis.MethodThe authors conducted a 3-year (2017, 2018, and 2019) randomized controlled trial in a series of introductory prosthodontics courses in dental education. A total of 137 participants were randomly assigned to flipped classroom (n = 70, 51%) or lecture (n = 67, 49%) formats. The flipped group was instructed to self-learn knowledge-based content through online preparation materials, including videos and text, while the lecture group was given text only. Both groups were provided with the same study content and opportunities for different styles of learning. The session attendance rate and number of times the materials were accessed were monitored. Individual and team readiness assurance tests (IRAT/TRAT) were conducted to evaluate knowledge acquisition. A multilevel linear regression analysis was conducted on both instructional styles (flipped vs. lecture) as an intervention factor, and confounding factors that could affect the outcomes were implemented.ResultsThe average number of online accesses was 2.5 times per session in the flipped group and 1.2 in the lecture group, with a significant difference (p < .05). The average IRAT score was significantly higher in the flipped than in the lecture group (effect size [ES] 0.58, p < .001). The number of online accesses was significantly and positively correlated with IRAT scores (0.6 [0.4, 0.8]). The instructional style was significantly and positively correlated with TRAT scores (coefficient [95% confidence interval]: 4.6 [2.0, 7.3]), but it was not correlated with IRAT (4.3 [-0.45, 9.0]).ConclusionsThe flipped classroom was more effective than the lecture format regarding knowledge acquisition; however, the decisive factor was not the instructional style but the number of individual learning occasions. The employment of the flipped classroom was the decisive factor for team-based learning outcomes.

Dental students' perceptions and academic performance in a preclinical fixed prosthodontics course delivered remotely during the COVID-19 pandemic

Introduction: The quarantine, due to the COVID-19 pandemic, forced dental schools globally to change to distant learning methods which include viewing previously recorded lectures or attending online virtual classes. Aims: The aim of this study was to assess the impact of three methods of teaching: Online interactive virtual classes, recorded lectures, and real-life classroom lectures on the academic performance of dental students. The second aim was to evaluate the students' perceptions of the two remote teaching methods as a substitute for traditional classroom lectures. Materials and Methods: The cross-sectional study was conducted with the second-year dental students at the College of Dentistry, King Saud bin Abdulaziz University for Health Sciences, during the spring semester of 2020. The last six lectures of a Preclinical Fixed Prosthodontics course were delivered remotely due to the COVID-19 pandemic. The students' performance in these lectures was compared to their performance in the first nine lectures of the course delivered traditionally before the quarantine period. An online survey was distributed to the students at the end of the course with questions about their perceptions regarding the different teaching methods used to deliver the didactic component of the course. Results and Discussion: The performance of 104 students (56 males and 48 females) was assessed through the number of correct responses for each teaching method. The percentage of students who responded correctly to all the questions was 44% for the classroom lecture format, 75% in the interactive virtual class format, and 78% in the recorded lecture format. The response rate to the online survey was 87.5%. The majority of the students (78%) indicated that the interactive virtual classes were an effective learning method. The perception about viewing recorded material was also positive as 83% of the students agreed that it is an adequate learning method when the classroom lectures were canceled. Nevertheless, only 43% indicated that recorded material could be used as a substitute for classroom attendance. Conclusion: The students' performance in the lectures taught remotely in interactive virtual classes or by viewing recorded lectures was both effective and comparable to traditional classroom lectures. The dental students were generally satisfied with the remote online education.

The Effectiveness of Students' Performance in Preclinical Fixed Prosthodontics Course in Predicting Subsequent Clinical Performance.

To evaluate the correlation between students' achieved grades in a preclinical fixed prosthodontics course and their performance in the same discipline's clinical courses. This study was conducted in 2019 on 76 students who passed all preclinical and clinical fixed prosthodontics courses. Their final examination grades in preclinical and clinical prosthodontics courses were compiled and made anonymous. The Statistical Package for the Social Sciences (SPSS Version 23) was used to analyze the data. Descriptive statistics and correlation coefficient were used to assess the relation between preclinical and clinical grades. A statistically significant positive correlation existed between the students' preclinical and combined clinical final examination grades (r = 0.45, p < 0.001). In relation to sex, females showed a significantly higher correlation (r = 0.56, p = 0.001) compared to males (r = 0.25, p = 0.1). In addition, students' clinical grade prediction from their preclinical performance was 20.5%. These findings emphasize the importance of preclinical courses and suggest that maximizing preclinical years' efforts can reflect positively on students' competence in their future clinical practice.

Improving effectiveness of dental students' feedback and course evaluation.

Dental students providing feedback about a course they take, in a timely manner, benefits not only teachers, but also indirectly the students themselves, especially if given with confidence in a constructive manner. Therefore, the aim of this study was to train students on how to give feedback, to ask them to provide feedback before and after the instructions were given, and analyze the change in their responses. Participants were students who attended the second-year preclinical course in prosthodontics. They were asked to provide feedback anonymously with online surveys after completing modules of the course during the academic year. There was no intervention prior to the first feedback; however, before providing the second feedback, students were asked to read a 1-page handout related to feedback modalities. Following this, an interactive workshop in feedback was provided prior to the third survey. The received responses were ranked as either: neutral, positive, negative, or constructive and were analyzed using a mixed repeated measures test with Bonferroni correction at a 0.05 significance level. The results showed a higher number of constructive and positive responses than both neutral and negative feedback (P ≤ 0.05) within the same surveys, but no interaction effect was found between the surveys (P = 0.076). Our data showed an increase in constructive feedback provided by students after the 2 different training methods, but the modality of delivery did not seem to significantly influence the results. In summary, training students on how to provide constructive feedback may be beneficial for teachers to improve their courses.

Teaching the Design and Fabrication of RPD Frameworks With a Digital Workflow: A Preclinical Dental Exercise.

IntroductionThe conventional method for teaching removable partial denture (RPD) design using a pencil drawing on a solid cast has always been the basis for teaching RPD design in most dental schools at both the undergraduate and graduate levels. This does not apply to RPD fabrication technology, as more laboratories have recently adopted more efficient and versatile digital techniques to design and fabricate RPD frameworks.MethodsAt the University of Iowa College of Dentistry, we created a pilot workshop to assess the efficiency of a new approach to teaching RPD design utilizing this new digital RPD technology as a teaching tool for graduate prosthodontics residents. Three first-year prosthodontics residents were enrolled in the workshop, which involved learning the new digital workflow of designing RPD.ResultsThis new teaching approach very successfully achieved its educational goals. The residents reported that the digital RPD teaching approach enriched their knowledge and deepened their understanding of RPD design.DiscussionThe technique garnered significant interest from the students and seemed to also increase their understanding of the steps involved in RPD fabrication as well as the different components of the RPD.

Learner behaviors in synchronous online prosthodontic education during the 2020 COVID-19 pandemic

Statement of problemSynchronous online prosthodontic courses became a popular learning mode during the 2020 COVID-19 pandemic crisis. Nonetheless, the extent of learner participation and completion of these courses remains unknown. PurposeThe purpose of this study was to assess learner behaviors in synchronous online prosthodontic continuing education lectures in China during the 2020 COVID-19 pandemic. Material and methodsAll live online prosthodontic courses held by an online dental school in China from February to May 2020 were retrieved. The no-cost lectures could be accessed anonymously and viewed repeatedly on the day of broadcast. Learning behavior data (teacher speaking time, audience total, timing of first visit to the online classroom, viewing time, and completion rate) were obtained. Learning progress was calculated by dividing viewing time by teacher speaking time. When a learner progressed through 95% of a lecture, the lecture was considered completed. ResultsA total of 41 781 learners participated in 18 online prosthodontic courses, which had a mean duration of 77.2 ±15.8 minutes. For each lecture, 2321 ±1454 participants attended, with 510 ±404 participants completing each session. There were 13 098 participants (31.35%) who viewed the lectures for less than 1 minute. Approximately half of the participants viewed the lectures for less than 10 minutes, with their learning progress failing to pass 10%. The average completion rate was 21.97%, with variation in completion rate dependent on when a learner first visited the online classroom. Significant differences were found among the lecture completion rates and the timing of the first visit to the online classroom (P<.001). ConclusionsSynchronous online prosthodontic education courses in China had a high number of participants but low learning progress and completion rates during the 2020 COVID-19 pandemic.

The "Painting by Numbers Method" for education of students in crown preparation.

No commercially available solution to improve the teaching of a crown preparation directly on typodont teeth exists at the moment. To fill this gap and support the supervisors of dental courses, a printable and inexpensive tooth was created for structured self-assessment. The aim of this study was to test this printable tooth under realistic pre-clinical situations. A two-coloured, double-layer practice tooth was developed. This tooth was consisting of a layer for a correct preparation and the crown. All printed teeth were produced with a stereolithographic printer. 35 voluntary second-year dental students in the second pre-clinical course in prosthodontics were randomly divided into two groups. All students had experience with typodont teeth and models. The first group was trained on four standard model teeth. The second group used model teeth for the first and fourth attempt and printed teeth for second and third attempt. The preparations of the students were scanned by an in-lab scanner and the surface deviations in contrast to a perfect preparation were measured. The differences between the first and fourth attempt were calculated. Benefits of the printed tooth were also evaluated by a questionnaire using German school grades completed by the students (1=Excellent, 2=Good, 3=Satisfactory, 4=Adequate, 5=Poor, 6=Unsatisfactory). The workflow was feasible and cost-effective regarding the production of the printed teeth. The overall rating of the printed tooth in the questionnaire was good (Ø 2.1±0.22). Students reported different advantages of this method in the free text. The comparison of the preparation between the first and fourth attempt showed that there was a significant better preparation with the printed teeth. The complete preparation had median values of 0.05mm (Group1: standard model tooth) and -0.03mm (Group2: printed tooth) (P=.005). Divided into single surfaces, the vestibular and occlusal regions were significantly better. The vestibular surface was 0.11mm (Group1) and -0.04mm (Group2) (P=.018). The occlusal surface was 0.13mm (Group1) and -0.05mm (Group2) (P=.009). The aim of this study was fulfilled. The printed tooth was tested successfully in a pre-clinical course. The feasibility of this teaching concept was confirmed by the questionnaire and the analysis of the preparation form. A significant difference to a standard model tooth was measurable. The students had the possibility to learn a correct crown preparation on a standardised two-layered tooth with included preparation. This printed tooth enabled the students to control the crown preparation directly on their own.