Prosthetic Industry Research Articles

Case Report: Variably Compliant Transtibial Prosthetic Socket Fabricated Using Solid Freeform Fabrication

Achieving and maintaining a comfortable fit in a lower-limb prosthetic socket is an important goal to help ensure a successful rehabilitation. The purpose of this case study was to assess the performance of sockets with compliant features integrated into the socket wall to relieve in-socket pressure during transtibial amputee gait. Two sockets incorporating variably compliant areas over the fibula head and distal tibia were fabricated for a transtibial amputee. The two sockets were designed with different levels of compliance and were compared with a third more conventional socket without compliant areas. All three sockets were otherwise geometrically identical and were aligned identically to eliminate in-socket pressure differences due to alignment. The three sockets were fabricated using selective laser sintering, a form of solid freeform fabrication. The in-socket pressure measurements were acquired during normal walking. Tekscan F-Socket pressure sensors were attached to the amputee’s residual limb rather than to the socket wall, which made it possible to measure pressures in the same location on the residual limb upon change of socket. A Vicon motion capture system was used to match in-socket pressures to the subject’s gait cycle. The pressure measurements showed that the compliant socket peak pressures over the distal tibia and fibula head were similar for the two compliance levels and nearly 50% and 30% lower than the conventional socket pressures, respectively. This case study showed that selective laser sintering manufactured sockets with variably compliant regions holds great promise for reducing contact pressure in sensitive regions of the residual limb. (J Prosthet Orthot. 2008;20:1‐7.) KEY INDEXING TERMS: prosthetic socket, amputees, CAD, CAM, solid freeform fabrication T he most important aspect of a lower extremity transtibial prosthesis is the socket design. The socket introduces a new interface or a new joint between the human and the mechanical support system. The forces generated through the socket either by body weight or by gait have to be carried by the soft tissue of the residual limb, which when improperly loaded can lead to discomfort or skin breakdown. Ultimately, the design and fit of the socket is what determines patient acceptance, comfort, suspension, and energy expenditure. 1 Achieving and maintaining a comfortable and tissue-tolerant socket fit remains a significant clinical problem. This study explores the use of new manufacturing techniques to fabricate sockets with integrated compliant features specifically designed to improve comfort and fit of the prosthesis.

Direct Production for Prosthetic Sockets using Rapid Prototyping

The number of people of having legs amputated due to traffic accidents or diabetes is increasing. To solve problems of artificial limb supply, CAD/CAM is starting to be used for creating artificial limb components. Many parts of the manufacturing process for the prosthetic industry remain to be automated, however Rapid prototyping technology may be useful in producing prosthetic sockets. We tested the ability of laser lithography in manufacturing prosthetic sockets, detailed as follows: (1) Construction of the production system for prosthetic sockets, (2) Material testing (tensile strength, bending strength, impact test), (3) Environmental test (humidity test, solar radiation test), (4) Structural load test (repeated load test, breaking test, wear test, field test), and (5) Allergic reaction test. Experiments confirmed the practicality of this system.