Proposed Space Vector Pulse Width Modulation Algorithm Research Articles

Segment Reduction-Based Space Vector Pulse Width Modulation for a Three-Phase F-Type Multilevel Inverter with Reduced Harmonics and Switching States

An improved segment reduction-based space vector pulse width modulation (SVPWM) for an F-type three-level inverter (FT2LI) is presented in this article. The proposed SVPWM algorithm decreases the additional switching state transition of each triangle with the application of an improved nine- and three-segment reduction switching strategy. The main feature of the segment reduction technique is that it eliminates second-order harmonics in the inverter output side with good total harmonic distortion (THD), low switching losses, and minimum filter requirements when compared with carrier-based PWM (CBPWM) techniques such as multi-carrier sine PWM (MC-SPWM), sixty-degree PWM (60° PWM), and switching frequency optimal PWM (SFO PWM). The proposed modulation algorithm for FT2LI is implemented on the MATLAB/Simulink platform. The performance of the proposed segment reduction-based SVPWM algorithm is tested experimentally on an FT2LI at various amplitude and frequency modulation indices, and the experimental results are verified with the simulation results. Additionally, a comparative analysis carried out to study the relationship between the segment reduction-based SVPWM and CBPWM techniques inferred that the suggested segment reduction-based SVPWM algorithms can optimize high-order harmonic distributions and have a minimum computational burden.

An SVPWM Algorithm for a Novel Multilevel Rectifier with DC-Side Capacitor Voltage Balance

The recently proposed novel unidirectional multilevel rectifier, a three single-phase star-connected multilevel rectifier, has the characteristic of having a large number of DC-side capacitors and a complex capacitor voltage balancing control structure under conventional carrier-based phase-shift sine wave pulse-width modulation (SPWM). Hence, a space vector pulse-width modulation (SVPWM) algorithm for the novel multilevel rectifier is proposed in this paper, which can quickly balance the capacitor voltage without an additional voltage balancing control structure. Firstly, it divides the space vectors of the rectifier, then it determines the two basis voltage vectors that synthesize the output reference voltage. After that, based on the analysis of the relationship between switching states and the charge–discharge of capacitors, the final action sequences of redundant vectors are determined according to the principle of keeping the capacitor charge–discharge time consistent. Thus, the capacitor voltages can be automatically balanced without an additional voltage balancing control structure. Finally, simulation and experimental results validated the feasibility and effectiveness of the proposed SVPWM algorithm. The results also show improvements in current quality, capacitor voltage balance and the fluctuation of the neutral point voltage on the DC-link, allowing for further reduction in the overall volume and cost of the rectifier.

A Simplified Space Vector Pulse Width Modulation Algorithm of a High-Speed Permanent Magnet Synchronous Machine Drive for a Flywheel Energy Storage System

A space vector pulse width modulation (SVPWM) algorithm is an important part of the permanent magnet synchronous machine (PMSM) drive to achieve direct current (DC) to alternating current (AC) conversion. The execution of the conventional SVPWM algorithm is a complex process which will limit the sampling frequency of the high-speed PMSM drive. Low sampling frequency will cause high current total harmonic distortion (THD) and eddy current loss. To increase the sampling frequency, this paper proposes a novel simplified SVPWM algorithm. The proposed SVPWM algorithm turns the vector composition problem of the conventional SVPWM algorithm into an optimization problem of the dwell time of the basic vector. The proposed SVPWM algorithm has an optimal vector dwell time (OVDT). The dwell time of the basic vector can be directly calculated by solving the optimization problem. The proposed SVPWM algorithm does not need sector identification compared to the conventional algorithm. The experiments of the proposed SVPWM algorithm are performed in a high-speed PMSM drive of a flywheel energy storage system (FESS). Compared to the conventional SVPWM algorithm, the execution time of the proposed SVPWM algorithm is reduced by 38%. By using the proposed SVPWM algorithm, the sampling frequency can be increased from 33 kHz to 40 kHz. With the higher sampling frequency, the current THD is reduced by 25.6%. The effectiveness of the proposed simplified SVPWM algorithm is verified experimentally.

A Novel Method Simulating Human Eye Recognition for Sector Judgement of SVPWM Algorithm

The conventional space vector pulse width modulation (SVPWM) algorithm is mature and widely used in the control of three-phase inverters. As we know, the position of the voltage vectors can be seen directly by human eyes, which can be used to replace the existing way for sector selection in the conventional SVPWM algorithm. Based on the fact, a novel method simulating human eye recognition for sector selection of SVPWM is proposed in this paper. In the real application, machine can replace human eyes, and it can `see' the sector step by step in which the voltage vector is located, and immediately give the switching time of the two non-zero voltage vectors. Theoretically, it can save the running time and complexity of the SVPWM algorithm reflected in the situation that multiple inverters are connected in parallel with the number of voltage vectors being increased. The feasibility of the proposed SVPWM algorithm has been validated by both simulation and experiments, which offers the possibility of the application in the multiple or multilevel converters.

Space vector PWM algorithm for a three‐level asymmetrical six‐phase motor drive

A space vector pulse-width modulation (SVPWM) algorithm for a three-level asymmetrical six-phase drive based on vector space decomposition (VSD) approach is presented in this paper. A modification in zero plane of the transformation matrix is proposed in order to meet the requirement that the realisation of sinusoidal output phase voltages can be obtained through the chosen output leg voltage space vectors. Furthermore, a method of choosing the switching sequences based on all possible one-level transitions of the leg voltages, i.e. a permutation method, is introduced. The algorithm is then validated experimentally and obtained results show that the developed method successfully achieves the desired fundamental phase voltage, although low order harmonics are present due to uncompensated inverter dead time. Last but not least, the performance of the proposed SVPWM algorithm is compared to several carrier-based PWM algorithms including in-phase disposition with ‘double min-max injection’ (PD-DI). This is a little known type of injection, which is verified to obtain identical performance as the presented multilevel algorithm.

A Novel SVPWM Algorithm Considering Neutral - Point Potential Balancing for Three - Level NPC Inverter

For three-level inverter, complexity of control strategy and neutral-point potential imbalance problem of DC side is the bottleneck restricting its application. In order to solve the problem, a simplified implementation of three- level space vector pulse width modulation (SVPWM) considering neutral-point potential balancing is proposed in this paper. The proposed SVPWM algorithm is based on judging of three phase voltages and voltage-second balance principle, which does not need to perform the sine and cosine c alculations, and thus it is more convenient and effective than traditional SVPWM algorithm. Also, the neutral-point potential balancing can be realized conveniently and effectively. The proposed algorithm can not only effectively simplify the calculation and reduce calculation time greatly, but also achieve the same control effect as traditional SVPWM. It has certain reference significance and can be used to shorten sampling time and improve the inverter performance. Finally, the proposed SVPWM algorithm is verified by simulation and experimental results.

Sector determination for SVPWM based four‐switch three‐phase VSI

Sector determination for a normalised space vector pulse width modulation (SVPWM) scheme is proposed for four-switch three-phase (FSTP) voltage source inverter (VSI) by using already available stationary reference frame stator voltages without requiring complex trigonometric calculations. The proposed method has been simulated by using MATLAB/Simulink and implemented using a VSI with a TMS320F28335 floating-point digital signal processing. Simulation and experimental results show the feasibility and effectiveness of the proposed SVPWM algorithm for FSTP inverter.

Generalised switching scheme for a space vector pulse‐width modulation‐basedN‐level inverter with reduced switching frequency and harmonics

This study presents a generalised online switching scheme for a space vector pulse-width modulation (SVPWM)-based multilevel inverter of any voltage level. The proposed SVPWM algorithm implements a generalised three-(similar to five) and seven-segment switching scheme using the three most desired switching states and one suitable redundant state for each triangle. In addition, a novel three-segment and seven-segment switching scheme has been proposed, which eliminates extra switching commutations and hence minimises the switching frequency of the devices while reducing harmonics. The proposed modulation algorithm using the generalised expressions is implemented online. The performance of the proposed novel algorithm for N-level inverter is tested experimentally on a five-level cascaded inverter at various fundamental frequencies and the experimental results are verified with the simulation results.

Simplified SVPWM that Integrates Overmodulation and Neutral Point Potential Control

A simplified and effective space vector pulse-width modulation (SVPWM) algorithm with two and three levels for three-phase voltage-source converters is proposed in this study. The proposed SVPWM algorithm only uses several linear calculations on three-phase modulated voltages without any complicated trigonometric calculations adopted by conventional SVPWM. This simplified SVPWM also avoids choosing the vector sector required by conventional SVPWM. A two-level overmodulation scheme is integrated into the proposed two-level SVPMW to generate the output voltage that increases from a linear region to a six-step state with a smoothly linear transition characteristic and a simple overmodulation process without a lookup table and complicated nonlinear functions. The three-level SVPWM with a proportional-integral controller effectively balances the neutral point potential of the neutral point clamped converter. Results from the simulation in MATLAB/Simulink and the experiment based on a digital signal processor are provided to clearly demonstrate the validity and effectiveness of the proposed strategies.

Space vector pulse‐width modulation algorithm and DC‐side voltage control strategy of three‐phase four‐switch active power filters

A space vector pulse-width modulation (SVPWM) algorithm and a DC-side voltage control strategy for three-phase four-switch shunt active power filters are proposed. The basic principle of three-phase four-switch inverters to output three-phase balanced voltages is investigated in detail. Based on an advanced coordinate transformation, the proposed algorithm ensures basic voltage vectors to be right on the coordinate axes of αβ-coordinate system, which has the advantages of less computation and higher accuracy than the traditional. It synthesises zero vectors by equalising the duration time of two basic voltage vectors, which are equivalent in amplitude and opposite in phase, to simplify control logic and decrease harmonics of output voltages. To stabilise the DC bus voltage and balance the DC-side capacitor voltages, a DC-side voltage control strategy is presented. The former objective is obtained by controlling the active partition of the output currents, and the latter one by adapting the direct partition of phase C output current. An overall control method combining the proposed SVPWM algorithm with the DC-side voltage control strategy is presented. Experimental results have shown the validity and feasibility of the proposed algorithm and strategy.

A new approach for selecting the switching states of SVPWM algorithm in multilevel inverter

AbstractThis paper presents a fast and real‐time space vector pulse width modulation (SVPWM) algorithm for multilevel inverters. A min.–max. method for selecting switching states is proposed for SVPWM algorithm. With the proposed method, the minimum switching commutation transition of between the triangles on the space vector diagram of the reference voltage vector is provided. The proposed SVPWM algorithm is also rather suitable for all values of linear modulation range and provides simplicity and applicability. Using this SVPWM algorithm, three‐phase voltages have been obtained from a five‐level cascade inverter. These voltages are applied to a three‐phase ac motor. The simulation results are verified by the experimental results. Copyright © 2006 John Wiley & Sons, Ltd.