Aggregation-induced Emission Properties Research Articles

Novel biocompatible N-rich AIE fluorescent probe for live cell imaging and visual onsite detection of uranium.

A sensitive and biocompatible N-rich probe for rapid visualuranium detectionwas constructed by grafting two trianiline groups to 2,6-bis(aminomethyl)pyridine. Possessing excellent aggregation-induced emission (AIE) property and the advantages to form multidentate chelate with U selectively, the probe has been applied successfully to visualize uranium in complex environmental water samples and living cells, demonstrating outstanding anti-interference ability against large equivalent of different ions over a wide effective pH range. A large linear range (1.0 × 10-7-9.0 × 10-7mol/L) and low detection limit (72.6nmol/L, 17.28ppb) were achieved for the visual determination of uranium. The recognition mechanism, photophysical properties, analytical performance and cytotoxicity were systematically investigated, demonstrating highpotential for fast risk assessment of uranium pollution in field and in vivo.

Fast and easy detection of hypochlorite by a smartphone-based fluorescent turn-on probe: Applications to water samples, zebrafish and plant imaging

We have developed a fluorescent probe DBT-Cl ((E)-2-(2-(4-(diphenylamino)benzylidene) hydrazinyl)-N,N,N-trimethyl-2-oxoethan-1-aminium chloride) for ClO− with an aggregation-induced emission (AIE) strategy depending on solvent polarity. DBT-Cl possessed a prominent solvatochromic emission property with intramolecular charge transfer (ICT) from the TPA (triphenylamine) to the amide group, which was studied by spectroscopic analysis and DFT calculations. These unique AIE properties of DBT-Cl led to the recognition of ClO− with high fluorescent selectivity. DBT-Cl quickly detected ClO− in less than 1 sec with a fluorescent color change from green to cyan. DBT-Cl had a low detection limit of 9.67 μM to ClO−. Detection mechanism of DBT-Cl toward ClO− was illustrated to be oxidative cleavage of DBT-Cl by 1H NMR titrations, ESI-mass, and DFT calculations. We established the viability for dependable detection of ClO− in actual water samples, as well as zebrafish and plant imaging. In particular, DBT-Cl was capable of easily monitoring ClO− through a smartphone application. Therefore, DBT-Cl assured a promising approach for a fast-responsive and multi-applicable ClO− probe in environmental and living organism systems.

Blue aggregation-induced emission bipolar materials consisting of diphenylsulfone or benzophenone core and triphenylethene-carbazole fragments for highly efficient OLEDs

Bipolar derivatives having aggregation-induced emission (AIE) properties were synthesized in reactions of 4,4′-difluorobenzophenone, 4-fluorophenyl-phenylsulfone or bis(4-fluorophenyl)sulfone with prepared key starting materials: 1,1,2-triphenyl-2-(9H-carbazol-2-yl)ethylene or 1-(9H-carbazol-2-yl)-4-(1,2,2-triphenylethenyl)benzene. The objective materials have shown high thermal stabilities and can form amorphous layers having high glass transition temperatures in the region of 110–173 °C. The photoluminescence spectra of the prepared derivatives registered using tetrahydrofuran-water solutions demonstrated strong blue emissions, confirming their AIE property. Thin films of the compounds were tested in multilayer organic light-emitting diodes. The device using bis(4-{2-[4-(1,1,2-triphenylethylenyl)phenyl]carbazol-9-yl}phenyl)sulfone emitter (EM3) outperformed the other devices, achieving a peak efficiencies of 3.4 % (5.6 cd/A and 4.7 lm/W) with maximum luminance of about 11000 cd/m2. However OLED using 4-{2-[4-(1,1,2-triphenylethylenyl)phenyl]carbazol-9-yl}phenyl-phenylsulfone (EM2) as emitter demonstrated higher efficiency at higher luminance values. The maximum efficiencies of the device were obtained at a luminance value of about 100 cd/m2 and were recorded as 3.2 % (5.2 cd/A and 4.1 lm/W) with luminance of 17515 cd/m2.

A high-performance organic fluorescent probe with aggregation-induced emission properties for long-term tumor monitoring

Near-infrared organic fluorescent probes have great need in biological sciences and medicine but most of them are still largely unable to meet demand. In this work, a delicate multipurpose organic fluorescent probe (DPPM-TPA) with aggregation-induced emission performances is designed and prepared by facile method to reflect fluorescence labeling, two-photon imaging, and long-term fluorescent tracking. Specifically, DPPM-TPA NPs was constructed from 4-(diphenylamino)phenylboronic acid and DPPM-Br by classical Suzuki coupling reaction and then coated with F127. Such nanoprobe possessed high stability in diverse medium under ambient temperatures, low cytotoxicity, and brilliant fluorescence performance. More importantly, DPPM-TPA NPs showed excellent two-photon imaging and extraordinary long-term fluorescence tracing capacity to malignant tumor, and it can last up to 9 days. These results indicated that DPPM-TPA NPs is expected to serve as a fluorescent probe for photodiagnostic and providing a new idea for the development of long-term fluorescent tracker.

Photorewriting, Time-Resolved Encryption, and Unclonable Anticounterfeiting with Artificial Intelligence Authentication via a Reversible Photoswitchable System.

In the fields of photolithographic patterning, optical anticounterfeiting, and information encryption, reversible photochromic materials with solid-state fluorescence are emerging as a potential class of systems. A design strategy for reversible photochromic materials has been proposed and synthesized through the introduction of photoactive thiophene groups into the molecular backbone of aryl vinyls, compounds with unique aggregation-induced emission properties, and solid-state reversible photocontrollable fluorescence and color-changing properties. This work develops novel photochromic inks, films, and cellulose hydrogels for enhancing the security of information encryption and anticounterfeiting technologies. They achieve rapid and reversible color change under ultraviolet light irradiation. Dependent upon the rate of color change, higher levels of time-resolved security can be achieved. This feature is important for enhancing the confidentiality of encrypted information and the reliability of security labels. Color-changing cellulose hydrogels, inks, and films consisting of three photochromic fluorescent molecules have quick photoactivity, great photoreversibility and photostability, and good processability, making them ideal for time-delayed anticounterfeiting and smart encryption. Furthermore, specialized algorithms are used to construct convolutional neural networks, and image analysis is performed on these systems, thus solving the current problem of the time-consuming information decryption process. This artificial intelligence method offers new opportunities for enhanced data encryption.

A Novel Enhanced-Fluorescent Probe Based on DHLA-Stabilized Red-Emitting Copper Nanoclusters for Methimazole Detection Via Aggregation-Induced Emission Effect.

Herein, an aqueous phase synthesis approach was presented for the fabrication of copper nanoclusters (Cu NCs) with aggregation-induced emission (AIE) property, utilizing lipoic acid and NaBH4 as ligands and reducing agent, respectively. The as-synthesized Cu NCs exhibit an average size of 3.0 ± 0.2nm and demonstrate strong solid-state fluorescence upon excitation with UV light. However, when dissolved in water, no observable fluorescent emission is detected in the aqueous solution of Cu NCs. Remarkably, the addition of Methimazole induced a significant red fluorescence from the aqueous solution of Cu NCs. This unexpected phenomenon can be ascribed to the aggregation of negatively charged Cu NCs caused by electrostatic interaction with positively charged imidazole groups in Methimazole, resulting in enhanced fluorescence through AIE mechanism. Therefore, there exists an excellent linear correlation between the fluorescent intensities of Cu NCs aqueous solution and the concentration of Methimazole within a range of 0.1-1.5 mM with a low limit of detection of 82.2 µM. Importantly, the designed enhanced-fluorescent nanoprobe based on Cu NCs exhibits satisfactory performance in assaying commercially available Methimazole tablets, demonstrating its exceptional sensitivity, reliability, and accuracy.

Controllable Synthesis of Furan-Based Poly(ester amide)s and Its Study on Adhesive and Aggregation-Induced Emission Properties

Controllable Synthesis of Furan-Based Poly(ester amide)s and Its Study on Adhesive and Aggregation-Induced Emission Properties

Effects of a Larger N‐Heterocyclic Ring in Rofecoxib Analogues on AIE Activity and Multifunctional Applications

AbstractTwo analogues of rofecoxib, 2‐Pyr‐ROF and 2‐Pip‐ROF, were designed according to the strategy of heterocyclic ring enlargement and facilely synthesized in a facile manner by Knoevenagel reactions. The first compound, 2‐Pyr‐ROF, had low quantum yields (QY) of 3.0 % in the solid states. After replacing the pyrrolidinyl with piperidinyl, the resulting 2‐Pip‐ROF had a significantly increased QY, with a value of 28 %. The root‐mean‐square deviation (RMSD) values between S0 and S1 of 2‐Pyr‐ROF and 2‐Pip‐ROF in tetrahydrofuran were 0.51, 0.35 Å, respectively. As compared with 2‐Pyr‐ROF, compound 2‐Pip‐ROF exhibited a smaller RMSD, which indicated a lower non‐radiative transition rate. A single‐crystal X‐ray diffraction study and Hirshfeld surfaces analysis revealed that 2‐Pip‐ROF had a more nonplanar molecule structure and a weaker π‐π interaction, which might result in a higher fluorescence intensity and QY. Owing to its better aggregation‐induced emission (AIE) behavior, compound 2‐Pip‐ROF showed more multi‐functional applications, including mechanochromism, acidochromism, and lipid droplets imaging ability. These results imply that the strategy of heterocyclic ring enlargement provides a new paradigm for the design of new luminogens with AIE properties.

Aggregation-Induced Emission of Naphthalene Diimides: Effect of Chain Length on Liquid and Solid-Phase Emissive Properties.

The aggregation-induced emission (AIE) properties of a systematic series of naphthalene diimides (NDIs) varying the chain length at the imide positions have been studied. A solvophobic collapse of NDI units through the flash injection of THF NDI solutions in sonicating water triggers the formation of stable suspensions with enhanced fluorescence emissions. Shorter chains favor the π-π stacking of NDI units through H-aggregation producing a strong AIE effect showing remarkably high quantum yields that have not been observed for non core-substitued NDIs previously. On the other hand, NDIs functionalized with longer chains lead to more disordered domains where π-π stacking between NDI units is mainly given by J-aggregation unfavoring the AIE effect.

Assessing the Impact of π‐Conjugation Length on Aggregation Induced Emission and Self‐Assembly Formation of α‐Cyanostilbene and Bis‐Cyanostilbene

AbstractIn this work, short π‐conjugated (Z)‐2‐(4‐(2‐cyano‐2‐phenylvinyl)phenoxy)‐N‐(1‐(3‐ethoxy‐4‐methoxyphenyl)‐2‐(methyl sulfonyl)ethyl)acetamide (CYS) and large π‐conjugated 2,2′‐(((1Z,1′Z)‐1,4‐phenylenebis(2‐cyanoethene‐2,1‐diyl))bis(4,1‐phenyl ene))bis(oxy))bis(N‐(1‐(3‐ethoxy‐4‐methoxyphenyl)‐2‐(methyl sulfonyl)ethyl)acetamide (BCYS) compounds were synthesized. Furthermore, the influence of π‐conjugation length on CYS and BCYS absorption, fluorescence, aggregation induced emission (AIE) characteristics, and self‐assembly was examined. The large π‐conjugated BCYS (π‐conjugation length=18.71 Å) exhibits AIE property getting on in the DMSO−Water solvent combination as the volume % of water increases and demonstrated production of self‐assembled bundle of micro fibrous structure of around 5 to 6 microns long and 200 to 500 nm wide. Short π‐conjugated CYS (π‐conjugation length=10.80 Å), on the other hand, exhibits aggregation caused quenching (ACQ) in the DMSO−Water solvent combination as the volume % of water increases and the creation of self‐assembled nanostructured crystalline asymmetrical particles. Moreover, the cytotoxicity study of CYS and BCYS revealed that BCYS had superior biocompatibility than CYS.

A thermochromic salicylaldehyde Schiff bases derivative with AIE properties due to twisted structure

Great attention has been attracted to the salicylaldehyde Schiff base due to its thermochromic and photochromic characteristics in the solid state. However, the boundary between photochromic and thermochromic salicylaldehyde Schiff base structures is still unclear, and few studies have been conducted to investigate their thermochromic behavior and structures in depth and systematically. In the present work, we have synthesized a novel salicylaldehyde Schiff base derivative (2,2′-((1E,1′E)-((2,2′-bis(trifluoromethyl)-[1,1′-biphenyl]-4,4′-diyl)-bis(azaneylylidene))bis(methaneylylidene))diphenol, BTB) with twisted structure, which possesses both thermochromic and aggregation-induced emission (AIE) characteristics, and systematically investigated its thermochromic properties, enol-keto isomerization, AIE properties, aggregated state, and excited state intramolecular proton transfer (ESIPT) process. Interestingly, in our study, we found that the color of the BTB molecule changed gradually during the heating process, and it can be found that the thermochromism of BTB is produced by the reversible equilibrium shift of the enol form and the keto forms due to the temperature change by the color difference test, the in-situ IR spectra and the DSC curves. Finally, the pathway of BTB proton transfer was analyzed through quantum chemical calculations, and it was found that enol ketone isomerization is achieved through single excited state intramolecular proton transfer, rather than the expected double excited state intramolecular proton transfer.

Cellulose nanofiber-templated metal-organic frameworks for fluorescent detection of methyl parathion pesticides

Methyl parathion is a typical organophosphorus pesticide that poses threats to the global environment and human health. In this study, we developed a portable 2D sensing pad for monitoring methyl parathion based on the aggregation-induced emission (AIE) properties of an innovated hybrid material that integrates cellulose nanofibers (CNFs) with luminescent metal-organic frameworks (LMOFs). The hybrid material enhanced the flexibility and moldability of LMOFs and significantly improved the scalability of sensing material. The resulting CNF/LMOF material was shaped into a 2D pad, exhibiting fluorescent properties under UV exposure. The fluorescence of the pad was quenchable upon exposure to methyl parathion. This host-guest interaction enabled the precise quantification of the pesticide’s concentration by monitoring the intensity variation of the fluorescence at 405 nm wavelength. We further engineered these hybrid pads into a user-friendly and portable sensing prototype, and then validated them with real sample testing. Time-dependent Density Functional Theory calculations were employed to elucidate the underlying fluorescence quenching mechanism triggered by methyl parathion. This work introduces a practical and sustainable sensing platform for pesticide detection.

Aggregation-induced-emission red carbon dots for ratiometric sensing of norfloxacin and anti-counterfeiting

The detection of trace antibiotic residues holds significant importance because it’s related to food safety and human health. In this study, we developed a new high-yield red-emitting carbon dots (R-CDs) with aggregation-induced emission properties for ratiometric sensing of norfloxacin. R-CDs were prepared in 30 min using an economical and efficient microwave-assisted method with tartaric acid and o-phenylenediamine as precursors, achieving a high yield of 34.4 %. R-CDs showed concentration-dependent fluorescence and aggregation-induced-emission properties. A ratiometric fluorescent probe for detecting the norfloxacin was developed. In the range of 0–40 μM, the intensity ratio of two emission peaks (I445 nm/I395 nm) towards norfloxacin show good linear relationship with its concentrations and a low detection limit was obtained (36.78 nM). In addition, complex patterns were developed for anti-counterfeiting based on different emission phenomenon at different concentrations. In summary, this study designed a novel ratiometric fluorescent probe for detection of norfloxacin, which greatly shortens the detection time and improves efficiency compared with high-performance liquid chromatography and other methods. The study will promote the application of carbon dots in anti-counterfeiting and other related fields, laying the foundation for the preparation of low-cost photosensitive anti-counterfeiting materials.

D-π-A type dicyanoethylene derivatives modified by tetraphenylethylene exhibiting aggregation-induced emission and high-contrast mechanofluorochromism

Based on a rational design strategy by combining an electron-withdrawing dicyanoethylene unit and electron-donating tetraphenylethylene moiety, we successfully synthesized two π-conjugated molecules Ph-TPE-MMN and NA-TPE-MMN. According to the optical research and theoretical calculation results, they had highly distorted conformations, D-A type molecular structure and definite intramolecular charge transfer (ICT) properties. Moreover, two molecules Ph-TPE-MMN and NA-TPE-MMN showed aggregation-induced emission (AIE) properties in the THF/water mixture at higher fw (water fraction). Ph-TPE-MMN and NA-TPE-MMN also exhibited fluorescence response to external force. The emitting color of both had changed greatly before and after grinding. The maximum emission wavelengths of Ph-TPE-MMN and NA-TPE-MMN were redshifted by 46 nm and 33 nm, respectively, implying high-contrast mechanofluorochromism. Notably, mechanofluorochromic process also showed a good reversible. XRD experiments indicated that mechanofluorochromic mechanism originated from changes in molecular stacking in solid state.

A supramolecular photosensitizer based on triphenylamine and pyrazine with aggregation-induced emission properties for high-efficiency photooxidation reactions

Recently, there has been a great interest in the study of photocatalysts (PCs) and photosensitizers (PSs) in the field of organic photocatalysis. In the present study, a pure organic thermally activated delayed fluorescence (TADF) molecule 4,4′-(12-(pyridin-4-yl)dibenzo[f,h]pyrido[2,3-b]quinoxaline-3,6-diyl)bis(N,N-diphenylaniline) (DPQ-TPA) was designed and synthesized, which not only have excellent TADF property and small energy splitting (ΔEST), but also can self-assembly in water to form cross-linked nanoparticles with exceptional aggregation-induced emission (AIE) characteristics. DPQ-TPA exhibits excellent remarkable selectivity and notably enhances the production capacity of reactive oxygen species (ROS), particularly 1O2, which was employed as a highly effective photocatalyst in the photooxidation reaction of phosphine and hydroazobenzenes under blue light irradiation with high yields up to 94% and 91%, respectively. This work expands the potential application of (donor-acceptor) D-A type AIE-TADF molecules in photocatalytic organic transformations through supramolecular self-assembly.

Mechanofluorochromic behaviors and data security protection properties of salicylaldimine-based difluoroboron complexes with different aryl substituents.

To further explore the relationship between aryl substituents and mechanofluorochromic (MFC) behaviors, four salicylaldimine-based difluoroboron complexes (ts-Ph BF2, ts-Ph-NA BF2, ts-2NA BF2, and ts-triphenylamine [TPA] BF2), including aromatic substituents with different steric hindrance effects, were designed and successfully synthesized. Four complexes with twisted molecular conformation displayed intramolecular charge transfer and aggregation-induced emission properties. Under external mechanical stimuli, the as-synthesized powders of ts-Ph BF2, ts-Ph-NA BF2, and ts-TPA BF2 exhibited redshift fluorescence emission behaviors, and ts-Ph BF2 and ts-TPA BF2 could be recovered to original shifts by fuming, but ts-Ph-NA BF2 displayed irreversible switching. ts-2NA BF2 had no change during the grinding and fuming processes. The results indicated that the MFC behaviors could be attributed to the phase transformation between the well-defined crystalline and disordered amorphous states by X-ray diffraction measurement. Further research illustrated that ts-TPA BF2 with the most significant MFC phenomenon could be applied in data security protection in ink-free rewritable paper.

Unlocking Diverse π-Bond Enrichment Frameworks by the Synthesis and Conversion of Boronated Phenyldiethynylethylenes.

The π-bond enrichment frameworks not only serve as a crucial building block in organic synthesis but also assume a pivotal role in the fields of materials science, biomedicine, photochemistry, and other related disciplines owing to their distinctive structural characteristics. The incorporation of various substituents into the C═C double bonds of tetrasubstituted alkenes is currently a highly significant research area. However, the synthesis of tetrasubstituted alkenes with diverse substituents on double bonds poses a significant challenge in achieving stereoselectivity. Here, we reported an efficient and convergent route of Cu-catalyzed borylalkynylation of both symmetrical and unsymmetrical 1,3-diynes, B2pin2, and acetylene bromide to the construction of boronated phenyldiethynylethylene (BPDEE) derivatives with excellent chemo-, stereo-, and regioselectivities. BPDEE derivatives could transform into novel tetrasubstituted organic π-conjugated gem-diphenyldiethynylethylene (DPDEE), vinylphenyldiethynylethylene (VPDEE), and phenyltriethynylethylene (PTEE) derivatives by a stepwise process, which provides a flexible platform for the synthesis of complex π-bond enrichment frameworks that were difficult to synthesize by previous methods. The initial optical characterization revealed that the synthesized molecules exhibited aggregation-induced emission (AIE) properties, which further establishes the groundwork for future applications and enriches and advances the field of functional π-conjugated frameworks research.

Bioprospecting of Chlamydomonas reinhardtii for boosting biofuel-related products production based on novel aggregation-induced emission active extracellular polymeric substances nanoprobes

Biofuel production from microalgae has been greatly restricted by low biomass productivity and long-term photosynthetic efficacy. Here, a novel strategy for selecting high-growing, stress-resistant algal strains with high photosynthetic capacity was proposed based on biocompatible extracellular polymeric substances (EPS) probes with aggregation-induced emission (AIE) properties. Specifically, AIE active EPS probes were synthesized for in-situ long-term monitoring of the EPS productivity at different algal growth stages. By coupling the AIE-based fluorescent techniques, algal cells were classified into four diverse populations based on their chlorophyll and EPS signals. Mechanistic studies on the sorted algal cells revealed their remarkable stress resistance and high expression of cell division, biopolymer production and photosynthesis-related genes. The sorted and subcultured algal cells consistently exhibited relatively higher growth rates and photosynthetic capacities, resulting in an increased (1.2 to 1.8-fold) algal biomass production, chlorophyll, and lipids. This study can potentially open new strategies to boost microalgal-based biofuel production.

3-Aroylbenzocoumarin-Based Luminogens: Bright Solid-State Emission, AIE Properties and Cell Imaging Application.

A series of 3-aroylbenzocoumarin-based luminogens have been synthesized for investigating their aggregation-induced emission (AIE) and solid-state fluorescence. The single crystal X-ray diffraction analysis of one of them showed that the molecules are arranged in the form of π-dimers which may lead to excimer emission. The large Stokes shifts and the broad-band emission of these 3-aroylbenzocoumarins in solid/aggregation state demonstrated the probable formation of excimers. The shapes of benzocoumarin units have a great effect on the AIE behaviors. The linear benzocoumarin derivatives show larger Stokes shifts, while the bent-benzocoumarin derivatives exhibit better AIE performances. All of them show aggregation-enhanced excimer emission which is supported by the large Stokes shifts. The electronic effect of 3-aroyl groups also has a certain effect on their fluorescence properties. The polymorphism phenomenon was observed for one of the benzoyl-containing derivatives. Additionally, two of the derivatives containing methoxy group were successfully used for cell imaging.

An AIE Controlled "Off-On" Cu2+-Sensitive Probe for Early Detection of Renal Fibrosis.

Early detection of renal fibrosis (RF) is very important given that it is irreversible when it progresses to the terminal stage. A key marker of RF pathogenesis is activation of myomyofibroblasts, and its targeted imaging may be a promising approach for early detection of RF, but no study has directly imaged activation of renal myomyofibroblasts. Cu2+ plays a major role in the fibrotic activity of myofibroblasts. Herein, inspired by that Cu2+ can complex with bovine serum albumin (BSA), BSA-Ag2S quantum dots (QDs) with aggregation-induced emission (AIE) property are synthesized. Then BSA-Ag2S QDs are modified by chitosan (CS) with renal targeting and hyaluronic acid (HA) with myofibroblast targeting to obtain the AIE assay system (QDs@CS@HA). The system is simple to synthesize, and produces a rapid NIR fluorescence signal turn-on response and a low detection limit of 75× 10-9 m to Cu2+. In addition, cellular and animal experiments have shown that QDs@CS@HA has good biosafety and cell-targeted imaging capability for RF. Based on the successful application of QDs@CS@HA and the mechanism of RF progression in early RF detection, it is expected that QDs@CS@HA may detect RF before the appearance of clinical symptoms.