Propagation Phase Research Articles

Quarter-Wave Plate Metasurfaces for Generating Multi-Channel Vortex Beams.

Metasurfaces of quarter-wave plate (QWP) meta-atoms have exhibited high flexibility and versatile functionalities in the manipulation of light fields. However, the generation of multi-channel vortex beams with the QWP meta-atom metasurfaces presents a significant challenge. In this study, we propose dielectric metasurfaces composed of QWP meta-atoms to manipulate multi-channel vortex beams. QWP meta-atoms, systematically arranged in concentric circular rings, are designed to introduce the modulations via the propagation phase and geometric phase, leading to the generation of co- and cross-polarized vortex beams in distinct channels. Theoretical investigations and simulations are employed to analyze the modulation process, confirming the capability of QWP meta-atom metasurfaces for generating the multi-channel vortex beams. This study presents prospective advancements for the compact, integrated, and multifunctional nanophotonic platforms, which have potential applications in classical physics and quantum domains.

Experimental study of precursory features of CO2 blasting-induced coal rock fracture based on grayscale and texture analysis.

CO2 blasting has been identified as a potent method for enhancing the permeability of coal seams and improving gas drainage efficiency. This study is focused on elucidating the deformation and fracture mechanisms of coal and rock during CO2 blasting and on identifying the precursor characteristics of these processes. To this end, a CO2 blasting-induced coal rock fracture pressure model and a gas pressure distribution model were developed. The research utilized a self-developed CO2 blasting test platform along with a non-contact full-strain field measurement analysis system. Briquette samples were subjected to CO2 blasting tests under controlled experimental conditions, which included an axial pressure of 1.0 MPa and variable gas pressures of 0.5, 1.0, and 1.5 MPa. This methodology enabled the capture of the principal strain field on the surface of the samples. The Gray Level Co-occurrence Matrix (GLCM) was employed to extract and analyze the grayscale and texture features of the strain cloud maps, facilitating a quantitative assessment of their evolution. The aim was to pinpoint the precursor characteristics associated with coal rock cracking and crack propagation. The results revealed that: (1) During the cracking and subsequent propagation of samples, the strain field's grayscale histogram underwent a transformation from a "broad and low" to a "narrow and high" configuration, with a consistent increase in peak frequency. Specifically, at 3 ms, a primary crack was observed in the sample, evidenced by a grayscale peak frequency of 0.0846. By 9 ms, as the crack propagated, the grayscale peak frequency escalated to 0.1626. (2) The texture feature parameters experienced their initial abrupt change at 3ms. Correlation with the gas pressure distribution model indicated that this was the crack initiation moment in the sample. (3) A secondary abrupt shift in the texture feature parameters occurred at 9ms, in conjunction with experimental phenomena, was identified as the crack propagation phase. Monitoring the grayscale and texture features of the principal strain field on the coal rock surface proved effective in recognizing the precursor characteristics of crack initiation and propagation. This research has the potential to reduce blasting costs in coal mines, optimize blasting effects, and provided theoretical guidance for enhancing gas extraction efficiency from deep and low permeability coal seams.

Optical ranging and vibration sensing based on the lagging propagation phase of structured beams.

Recently, studies have shown that the spatial confinement on waves or photons with beam shaping techniques would modify the propagation speed of optical fields including both group and phase velocities. Particularly, for the monochromatic spatially structured beams, the reduced longitudinal wave vector enables the phase velocity to be superluminal, causing a lagging propagation phase. In this Letter, we propose a novel, to the best of our knowledge, scheme for optical ranging and vibration sensing with the lagging propagation phase of structured beams. We experimentally demonstrate the extraction of displacement from the rotating angles of interfering fringes of superposed Gaussian and higher-order Bessel beams with lagging propagation phase difference. The measuring range is 0.2 m with the limitation of the tested moving stage, but it can be extended to tens of meters in principle. The measuring resolution can reach sub-millimeters, which can be further improved by carefully designing the probe beam and using a finer camera. The results may provide potential applications in position sensing and monitoring.

Cylindrical vector beam multiplexing holography employing spin-decoupled phase modulation metasurface

Abstract Cylindrical vector beams (CVBs) hold considerable promise as high-capacity information carriers for multiplexing holography due to their mode orthogonality. In CVB holography, phase holograms are encoded onto the wave-front of CVBs with different mode orders while preserving their independence during reconstruction. However, a major challenge lies in the limited ability to manipulate the spatial phase and polarization distribution of CVBs independently. To address this challenge, we propose a spin-decoupled phase modulation strategy by leveraging the propagation and geometric phase of composite phase metasurfaces. By exploiting the polarized Poincaré sphere, we show that CVBs can be decomposed into two circularly polarized components with orthogonal polarization states and conjugate phase distributions. This decomposition enables independent control of the phase and polarization distributions of CVBs by modulating the initial phase and phase difference of these two components. Consequently, two holograms with discrete spatial frequency distributions that carry opposite helical phases are encoded to modulate the wave-front of CVBs by the metasurface consisting of Si nanopillars. This allows for us to achieve successful four-channel CVB multiplexing holography. Benefiting from the non-dispersive nature of geometric phase, this metasurface exhibits a broad operating band spanning the entire visible light spectrum (443 nm–633 nm). These suggest that our proposed method offers comprehensive control over the spatial phase and polarization of CVBs, thereby holding significant potential for advancing their application in holography.

Ultracompact polarization multiplexing meta-combiner for augmented reality display.

Augmented reality (AR) display, as a next-generation innovative technology, is revolutionizing the ways of perceiving and communicating by overlaying virtual images onto real-world scenes. However, the current AR devices are often bulky and cumbersome, posing challenges for long-term wearability. Metasurfaces have flexible capabilities of manipulating light waves at subwavelength scales, making them as ideal candidates for replacing traditional optical elements in AR display devices. In this work, we propose and fabricate what we believe is a novel reflective polarization multiplexing gradient metasurface based on propagation phase principle to replace the optical combiner element in traditional AR display devices. Our designed metasurface exhibits different polarization modulations for reflected and transmitted light, enabling efficient deflection of reflected light while minimizing the impact on transmitted light. This work reveals the significant potential of metasurfaces in next-generation optical display systems and provides a reliable theoretical foundation for future integrated waveguide schemes, driving the development of next-generation optical display products towards lightweight and comfortable.

Discrete Lattice Element Model for Fracture Propagation with Improved Elastic Response

This research presents a novel approach to modeling fracture propagation using a discrete lattice element model with embedded strong discontinuities. The focus is on enhancing the linear elastic response within the model followed by propagation of fractures until total failure. To achieve this, a generalized beam lattice element with an embedded strong discontinuity based on the kinematics of a rigid-body spring model is formulated. The linear elastic regime is refined by correcting the stress tensor at nodes within the domain based on the internal forces present in lattice elements, which is achieved by introducing fictitious forces into the standard internal force vectors to predict the right elastic response of the model related to Poisson’s effect. Upon initiation of the first fractures, the procedure for the computation of the fictitious stress tensor is terminated, and the embedded strong discontinuities are activated in the lattice elements for obtaining an objective fracture and failure response. This transition ensures a shift from the elastic phase to the fracture propagation phase, enhancing the predictive capabilities in capturing the full fracture processes.

An empirical model for the tropical Indian region using in-situ and space-borne observations taking into account of tropical oscillations

An empirical model of temperature is developed using long-term observations of radiosonde (52 years), M-100 Rocket (17 years), and Sounding of the Atmosphere by Broadband Emission Radiometry (SABER) (22 years) data. The dominant oscillations such as Annual Oscillation (AO), Semi-Annual Oscillation (SAO), Terr-Annual oscillation (TAO), and Quasi-Biennial Oscillation (QBO) variability has been incorporated into the temperature to obtain the empirical atmosphere. The monthly mean of temperature obtained from radiosonde from 0 to 25 km, M-100 rocket from 26 to 80 km and SABER from 26 to 109 km has been subjected to the Fast Fourier Transform technique to retrieve the amplitudes and phases of AO, SAO, TAO, and QBO. The amplitudes and phases obtained are put in an empirical formula along with the temperature obtained from the observations to retrieve the empirical temperature. The empirical model is developed for two epochs (1971–1990, and 2002–2023). The amplitude is similar in both epochs for the TAO, and it is high in the first compared to the second epoch for SAO, AO, and QBO. The peak in the amplitude (3–4 K) is obtained between 80 and 90 km for TAO, and between 70 and 80 km (2–3 K) for SAO. The amplitude is less than 1 K for AO in both the epochs. The peaks in the QBO are observed between 20 and 30 km (2–3 K), another between 60 and 70 km (3–4 K) in the first epoch and above 80 km (2–3 K). Downward phase propagation is dominant for all the oscillations observed below 50 km, and upward propagation above. The empirical temperature obtained compares well with the observations below 20 km (RMSE <1 K) and shows differences above it (RMSE ∼ 4–6 K). This is due to the fact, that the amplitude of the oscillation is more in the stratosphere and mesosphere which results in perturbation of the background temperature.

Optical wave propagation phase for mKdV spherical electric flux density in sphere space

In this article, we illustrate surface flow alfa-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$alfa-$$\\end{document} microfluidical mKdV spherical electromotive phase in sphere space. Also, we obtain antiferromagnetic axially electrical alfa-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$alfa-$$\\end{document}microfluidical mKdV electric flux path circuit. We have electrical alfa-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$alfa-$$\\end{document}microfluidical geometrical mKdV free surface flow density in sphere space. Finally, we design antiferromagnetic wave propagation for alfa-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$alfa-$$\\end{document} microfluidical geometric mKdV surface flux density.

Modified post-installed adhesive anchorage test: Investigation of in-place compressive strength of concrete and influential factors

This paper presents the Modified Post-installed Adhesive Anchorage test (MPAA) as a method for evaluating the in-place compressive strength of concrete. It considers various influential factors, including test surface characteristics, concrete strength, anchorage depth, bolt diameter, and rebar location. Additionally, a formula for calculating concrete compressive strength, applicable to various influencing factors, was suggested. The findings demonstrate the effectiveness of MPAA in assessing in-place compressive strength of concrete with a high degree of precision. Following pull-out test, the prevalent failure modes observed were vertebral failure and vertebral-bond composite failure. Moreover, diverse concrete strengths, anchorage depths, and rebar locations demonstrated differing impacts on failure modes, while test surface characteristics and bolt diameter exerted less noticeable effects. The pull-out force-displacement curve during pull-out displayed three discernible phases: the elastic phase, crack propagation phase, and descent phase. When conducting on-site assessments, it is advisable to situate test points on the side surfaces of the members. Furthermore, factors like cover thickness and rebar location should be thoroughly evaluated when positioning test points. This encompasses the prudent choice of anchorage depth and bolt diameter to improve test precision. The suggested formula for calculating compressive strength exhibited minimal error and is applicable in determining concrete compressive strength for a wide range of practical engineering contexts. This study not only establishes a theoretical underpinning and offers support for standard revisions but also furnishes valuable guidance for conducting on-site testing procedures.

Elimination of reflection losses in gradient metasurface optical elements

Optical metasurfaces can achieve arbitrary wavefront control using subwavelength nanostructures, enabling imaging, sensing, and display applications using ultrathin structures. Metasurface optical elements that rely on propagation phase achieve this control using varying fill fractions of high refractive index materials, resulting in surface regions with significantly different effective refractive index. The intrinsic need for index variation makes it a non-trivial task to eliminate reflection losses across a complete optical element. Here, we investigate the optical performance of high-index metasurfaces, modified to suppress surface reflections. We demonstrate that a drastic reduction of surface reflections across an entire gradient metasurface is possible through the application of a single optimized anti-reflective layer with a thickness and refractive index that are substantially different from the traditionally expected values.

Differences between the geometric phase and propagation phase: clarifying the boundedness problem.

We show white light interferometer experiments that clearly demonstrate the basic differences between geometric and propagation phases. These experimental results also suggest a way to answer the "boundedness problem" in geometric phase-whether geometric phase is unbounded (i.e.,can take on any values without limit) or bounded (i.e.,limited to values between -π and +π). We show why the answer to this question is not as easy as it seems, from both a theoretical and an experimental perspective, and explain how the answer depends on one's choice of phase convention. We also hope that the videos provided will be pedagogically useful for explaining geometric phase.

Mitigation strategy for Li-ion battery module thermal runaway propagation triggered by overcharging

The popularity and development of alternative energy vehicles have drawn critical attention to thermal safety concerns. The occurrence of fire and explosion due to thermal runaway propagation (TRP) has become a hurdle in developing new energy vehicles. Therefore, to study the TRP behavior of modules subjected to overcharged electrical abuse, we built a 1 × 5 pouch Li-ion battery module TRP model that combines a P2D electrochemical model and a 3D thermal runaway model. We present a complete analysis of TRP characteristics by examining TRP behavior under various design parameters such as thermal runaway trigger temperature (TTR), cell spacing (L), thermal conductivity (K), and heat dissipation coefficient (h). Increasing TTR can delay TR in each cell, effectively slowing the propagation speed, and TRP is prevented at TTR = 583 K. As L increases, the TRP is considerably extended, but TR in the overcharged cell is shortened. The higher K has a delaying impact on the TR of the overcharged cell but leads to a noticeably shorter TRP time. Higher h slows TRP and prolongs TR trigger time of the overcharged cell. We also investigated the intrinsic mechanism of TRP suppression by performing a heat flux analysis and screening several critical cases for TRP suppression. TRP's actual condition is delineated along a criticality line, distinguishing between propagation and non-propagation phases, and confirmed by experimental validation of typical TRP, critical TRP, and non-TRP cases. Furthermore, we studied the parameters requirement for battery module thermal management in the non-TRP region. These findings provide valuable insights for enhancing the safety design of battery systems and mitigating heat-related hazards.

Dual-band terahertz reflective-mode metasurface for the wavefront manipulation of independent linear and circular polarization waves

Metasurfaces (MSs) are being extensively researched owing to their ability to modulate the polarization and wavefront of electromagnetic (EM) waves in a flexible manner, which usually offer significant advantages including ultra-thinness, low losses, and easy fabrication. However, conventional MSs typically operate well only with a single polarization. Here, we propose a novel design strategy for a terahertz (THz) reflective-mode MS that relies on a single unit-cell arrangement combining propagation phase and geometric phase. Our designed MS can achieve multiple wavefront manipulations in reflection mode, not limited to circular polarization (CP) transformation, but also enabling linear polarization (LP) conversion. The MS we propose consists of a periodic array of bilayered metal patterned resonator structures sandwiched by a dielectric substrate. The metallic resonator is made of the outer single-split-ring (SSR) and C-shaped slot (CSS), inner double-split-ring (DSR), and its complementary structure. With this design, the MS is capable of converting a LP wave to its orthogonal counterpart at lower frequency (f1=0.7THz) after reflection. Additionally, at higher frequency (f2=1.4THz), the proposed MS can also convert the right-handed CP (RCP) to left-handed CP (LCP) upon reflection or vice versa. The 2π phase full coverage of the orthogonal LP and CP waves can be achieved independently and simultaneously by adjusting the opening and orientation angles of the SSR based on propagation phase, and orientation angle of the DSR based on geometric phase. We numerically demonstrate beam deflection, planar focusing, and the vortex beam for both reflected orthogonal LP and CP waves with three representative MSs to provide proof of concept. These findings reveal the great potential for multifunctional devices for dual-polarization in imaging and communication systems.

Comparison of two filter approaches for characterizing boreal summer intraseasonal oscillation

Two commonly used filter approaches for boreal summer intraseasonal oscillation (BSISO) are investigated with the observations during 1979–2021. One is the real-time BSISO index and the other is based on 20–80-day Lanczos bandpass filter. Both two filter approaches are able to isolate spatial structure and life cycle of BSISO realistically in the Indo-NWP region. But the BSISO phase pattern match does not guarantee consistent propagation characteristics and phase occurrence frequency. The real-time monitoring methods such as real-time BSISO index does not use future information beyond the current date, so it is influenced by seasonal mean anomalies induced by El Niño on the interannual timescale over the Indo-NWP region. During post-El Niño summers, the real-time BSISO index shows a weaker northward propagation than bandpass filter approach. Phases 2–4 of BSISO show relatively higher occurrence frequency than other phases during post-El Niño summers in real-time BSISO index, resulting in the seasonal mean of active eight BSISO phases largely resembling the El Niño induced mean state anomaly pattern with depressed convection and low-level anomalous anticyclone in the tropical northwest Pacific region. Bandpass filter approach exhibits a more uniform phase occurrence frequency for both normal and post-El Niño summers, which is consistent with the random nature of BSISO as one of atmospheric internal variability. Bandpass filter approach is recommended for studies of BSISO northward propagation and its relationship with low-frequency variability such as ENSO.

Optical anisotropy of crystallized vanillin thin film: the science behind the art

Vanillin, a common household flavoring agent, turns into mesmerizing artwork under a polarizing microscope. This artwork can be used to decipher crystal nucleation and growth mechanisms. The trick to create such artwork is to grow a crystalline vanillin thin film tens of micrometers thick to allow white light to be transmitted through a singular, instead of multiple overlapping, crystal grains. A series of experiments were carried out to determine the optimal conditions to grow such single crystal vanillin films. Vanillin crystal’s chemical structure is anisotropic, specifically monoclinic. When a light wave propagates through its anisotropic crystallographic planes, it splits into two orthogonal beams, which in turn generates optical interference patterns unique to its molecular packing structure. We hypothesized that the resulting spectacular color pattern of vanillin micrographs was driven by its asymmetric crystal structure when vanilla macromolecules grew with covalent and or hydrogen bonding force during solidification. We employed a long-range molecular bonding model to simulate chemical interaction of multiple vanillin molecules. We interpreted the vanillin film growth mechanism as the radial propagation of single crystal phases in combination of amorphous phases to fill spacing between crystalline phases. The relationship between the optical interference pattern of recrystallized vanillin thin film and its microstructure was established through this study. The outcome of this study may shed light into engineering anisotropic crystals into micro to nanoscale optical devices with preferred optical reflectance.

Strategies to alleviate distortive phase transformations in Li-ion intercalation reactions: an example with vanadium pentoxide.

Chemical and electrochemical Li-ion insertion in transition metal oxides, either via a phase transformation reaction (ions insert into specific crystallographic sites of the host lattice) or a solid solution insertion (ions distribute uniformly throughout the host lattice), enables high energy density electrochemical energy storage. Many phase transformation cathode materials, that undergo two-phase reactions, exhibit high theoretical capacities arising from multi-electron redox reactions. However, challenges in distortive phase transformations and uncontrolled phase nucleation, propagation, segregation, and co-existence continue to limit the energy density, (dis)charging rate performances, and cycling stability of available phase transformation cathode materials. Vanadium pentoxide (V2O5), a classical layered intercalation host material with high theoretical capacity, undergoes irreversible structural changes and capacity fading when intercalating more than one lithium ion per V2O5 unit in its thermodynamically stable phase. Here, we review recent synthetic strategies to alter the V-O connectivity, thereby alleviating distortive phase transformations and promoting solid solution-based Li-ion insertion in V2O5. We also summarize several widely accessible and classical molecular-based analytical tools that can provide local structural dynamics and phase transformation mechanism information on the lithiation of V2O5, including single-crystal X-ray diffraction, infrared and Raman spectroscopy, electron paramagnetic resonance, and nuclear magnetic resonance spectroscopy.

Control of Low-Level Wind on the Diurnal Cycle of Tropical Coastal Precipitation

Abstract To understand how coastal precipitation is controlled by the low-level background wind, we performed comprehensive analysis using the 17-yr observations of the TRMM PR over the entire region of the tropics. We classified the data according to the direction (onshore or offshore) and strength of the cross-shore wind. Under weak winds, the contribution of the diurnal cycle to total precipitation is large, indicating that thermally forced precipitation with a symmetrical propagation pattern with opposite sign across the coastline is dominant. As the background wind strengthens, the contribution of the diurnal cycle reduces owing to the predominance of mechanical forcing; however, the effect of the diurnal cycle remains nonnegligible with an asymmetrical propagation pattern across the coastline. Using the linear theory of the sea–land-breeze circulation, we demonstrated that the difference in propagation is attributable to gravity waves excited by the land–ocean surface heating difference. Under weak winds, symmetrical diurnal phase propagation is caused by the two symmetrical modes of landward and seaward gravity waves. Under stronger background winds, in addition to the Doppler-shifted landward and seaward modes, waves propagating toward the upwind side in the flow-relative frame but with slow group velocity are advected to the downwind near the coastline, forming another mode that moves slowly in the downwind direction. The superposition of the three modes leads to asymmetrical propagation of precipitation with varying phase speed depending on the distance from the coastline.

Effect of maximum applied cyclic stress on fretting fatigue stress distribution of flat-on-flat modified 9Cr-1Mo steel contact: Finite element analysis

Fretting fatigue experiments were conducted on a modified 9Cr-1Mo (P91) steel under flat-on-flat contact with maximum applied cyclic stress (σmax) levels of 450 MPa, 500 MPa and 550 MPa at a stress ratio of 0.3 and a contact pressure of 100 MPa. A decrease in the cyclic life was observed with an increase in σmax. Chaboche model with isotropic and kinematic hardening was employed in finite element analysis to evaluate the stress distribution near the contact pad and along the contact surface under fretting fatigue conditions. In addition, the contact-related parameters such as contact pressure, contact shear stress and relative tangential motion were also assessed. The relative tangential motion was found to increase with increasing σmax. Besides, the peak values of normal stress (parallel to the applied loading direction) and maximum principal stress were observed around the leading and trailing edges of the contact pad at the σmax. The amplitude of relative tangential motion and slip zone increases with σmax. The orientations of the principal plane and shear plane to the applied cyclic loading direction are −89.5° and −134.5°, irrespective of the σmax. The fracture surface of the failed specimen revealed that the direction of the crack was nearly perpendicular to the applied stress. Smith-Watson-Topper parameter was used for estimating the crack initiation life with σmax. It has been noticed that the fraction and dominance of crack initiation or propagation phase depend on the imposed cyclic condition for the steel.

Prediction of rock loading stages using average infrared radiation temperature under shear and uniaxial loading

Accurately predicting geologically rock loading phases under varying water levels is crucial to prevent rock engineering operations from severe geological hazards. Acoustic emission (AE) traditionally determines these phases, but machinery in rock projects can disrupt AE sensors, leading to imprecise data and potential accidents. To address this, our study tested a novel approaches using AE, Average Infrared Radiation Temperature (AIRT), Critical Slow Down Theory (CSDT), and Convolutional Neural Networks (CNNs) to predict rock loading phases accurately under different water conditions. The research findings are: (1) AE analysis divides the stress–strain curve into four phases: crack closure, elastic deformation, and stable and unstable crack propagations. Each phase exhibits distinct characteristics in terms of AE signal behavior. (2) AIRT analysis reveals specific patterns during different loading phases. The AIRT and cumulative AIRT have distinct trends in different phases. (3) The AIRT sequence's fractal dimension shows distinct trends during loading phases: it initially rises during the elastic phase and then declines. Fractal dimensions for crack closure, elastic deformation, and stable crack propagation increase, while that for unstable crack propagation decreases with water content. 4) The stress–strain curve phases were successfully predicted by using AIRT and CSDT, demonstrating a strong correlation with actual stress levels. Notably, this marks the first-time prediction of phases through non-destructive tests (IR and CSDT), where CSDT fluctuations at each stage can serve as early indicators of rock failure.5) The proposed CNNR model achieves high accuracy (98%) in predicting different phases of the stress curve using AIRT. It particularly performs well in the elastic deformation and stable crack propagation phases, with only a few instances of false negative predictions. The model shows promising potential for effective and safe geological projects, especially under varying water conditions. The findings contribute to the understanding of rock behavior and offer insights for the design of safer and more efficient rock engineering projects.

Circularly polarized terahertz wave independently controlled tunable spin-decoupled metasurface

The research and development of multifunctional metasurfaces has attracted much attention, and manipulating multifunctional devices with greater degrees of freedom is a continuing trend. In this study, we propose a tunable multifunctional metasurface with terahertz (THz) frequency and demonstrate it theoretically. By introducing the propagation phase decoupling conjugate response, we realize the independent control of beam deflection(deflection angle is 8.1°), beam splitting（split angle is 16.5°）, and vortex beam mode switching under different incident conditions. At the same time, by changing the Fermi level of the Dirac semimetal, the switching between different states under the same incident condition is realized. The results of this study are expected to contribute to promising applications in future for improving the capacity of THz communication systems, independently regulating multi-functional devices.