Acoustic Wave Propagation Research Articles

ANISOTROPY OF ACOUSTO OPTICAL PROPERTIES IN PbMoO4 CRYSTALS WITH NEODYMIUM ADMIXTURE

The anisotropy of the efficiency of Bragg diffraction of light by longitudinal acoustic waves propagating along the [100] and [001] directions in pure and neodymium-doped lead molybdate crystals has been studied. The Nd impurity concentration was approximately 0.2 mol%. The Dixon method was used to determine the effective photoelasticity constants (peff) and the corresponding acousto-optical quality factors (M2) for various directions of polarization of incident light. The velocity of acoustic waves was determined by measurement the angle of Bragg diffraction on these waves. It is shown that in pure and doped lead molybdate crystals there is a dependence of the peff and M2on the direction of propagation of the acoustic wave and the polarization of the incident light.

Landau damping effects on dust ion-acoustic solitary waves in a nonthermal pair-ion plasma

The Landau damping effects on the nonlinear propagation of dust ion-acoustic solitary waves (DIASWs) are studied in an electron-free unmagnetized collisionless dusty pair-ion plasma. The two species of nonthermal ions (positive and negative) are described by the kinetic Vlasov equations, whereas the massive charged dust grains form only the background plasma. Using the multi-scale reductive perturbation technique generalized for the applications to the Vlasov equation, we derive a modified Korteweg–de Vries (KdV) equation that governs the evolution of DIASWs with the effects of linear resonance, in particular, linear Landau damping. The properties of the phase velocity and the Landau damping rate of DIASWs are studied with the effects of positive and negative-ion nonthermality parameters ( α p , α n ), the ratios of the positive to negative ion masses (m) and temperatures (T) as well as the dust to negative-ion number density ratio (δ). It is found that, depend on the degree of positive to negative ion mass ratios (m), both of damped and growing oscillations occur in a collisionless dusty pair-ion plasma due to the resonance phenomena between the wave and the nonthermal particles of the system. The properties of the decay rates of the amplitude of the KdV soliton with a small effect of Landau damping are also studied with the above system of parameters. The results may be useful for understanding the localization of solitary pulses and associated resonance damping and/or growing oscillations of the wave in laboratory and space plasmas, in which the number density of free electrons is much smaller than that of ions and highly charged heavy, micron seized dust grains.

Exploring plasma phenomena with the Nizhnik–Novikov–Veselov formula: Analyzing ion-acoustic waves, solitons, and shocks

This paper delves into the intricacies of the ([Formula: see text])-dimensional asymmetric Nizhnik–Novikov–Veselov ([Formula: see text]) model, a nonlinear partial differential equation governing ion-acoustic wave propagation in plasma. By employing advanced analytical and numerical approaches, the study explores innovative solitary wave solutions, particularly focusing on the dynamics of isochoric flow. Isochoric flow analysis is crucial for unraveling the complex behaviors exhibited by incompressible fluids like elastomers and bio-elastomers, which maintain a constant density. The derivation of the ([Formula: see text])-dimensional [Formula: see text] equation stems from fluid equations governing plasma dynamics. This model serves as a valuable tool for simulating experimental observations of plasma waves. The computational methodology applied in this research demonstrates a commendable level of precision and consistency, yielding novel solitary wave solutions previously unreported in the [Formula: see text] model. These results underscore the study’s importance and novelty. The outcomes not only contribute to our understanding of incompressible fluid dynamics, but also lay the groundwork for future investigations in this domain. The revealed solitary wave solutions have the potential to inform the development of more accurate models for predicting fluid dynamics, thereby advancing the field.

Design of a broadband acousto-optic filter using bulk acoustic wave beam steering with an interdigital transducer

Acousto-optic tunable filters are photonics devices whose operation is fundamentally based on crystal acoustics. One of the phenomena used to improve performances of bulk acousto-optic devices is acoustic beam steering. Here we present a complete analytical model, which covers bulk acoustic wave beam steering in crystals with phased-array excitation and Bragg phase matching of anisotropic acousto-optic diffraction. An interdigital phased-array transducer is proposed for laterally excited bulk acoustic wave generation enabling the effect of beam steering. The design of a paratellurite-based acousto-optic filter with extended transmitted optical wavelength range from 0.4 to 1.1μm is discussed and supported by numerical simulations.

An Efficient Method for Solving Problems of Acoustic Scattering on Three-Dimensional Transparent Structures

The article contains a study of methods for solving integral equations in the context of acoustic problems. The methodology considered is applied to describe acoustic wave propagation and scattering. Efficient discretization methods are used together with iterative methods to solve the operator equations, including an apparatus for fast multiplication of the resulting post-discretization Toeplitz matrices by a vector using the fast Fourier transform. The theoretical analysis of the proposed numerical algorithm demonstrates its efficiency in terms of the required number of arithmetic operations and the memory footprint of the computing system. The presented numerical simulation demonstrates the possibility of solving the problem of acoustic wave propagation in transparent media using the proposed methods. A visualization of the obtained solutions for a practical problem with a high level of discretization of the solution volume domain is also presented.

On the bandgap mechanism of periodic acoustic black holes

Acoustic black holes (ABHs) are primarily intended to eliminate the propagation of bending waves in structures although the same physical principles have been used to reduce the propagation of acoustic waves in ducts. The latter are usually referred to as sonic black holes (SBHs). ABHs (and also SBHs) only work well above a certain cut-on frequency which depends on their size compared to the incident wavelength. This limits their effectiveness to the high frequency range. To overcome this problem, several works have proposed the design of periodic ABHs to generate stopbands for low frequencies and improve their operating range. The purpose of this communication is to shed some light on the nature of such bandgaps. The k(ω) method is used to calculate the complex dispersion curves of various periodic ABH configurations and it is shown that, contrary to what is suggested in many works, the generation of bandgaps is essentially due to Bragg scattering and not to local resonances for embedded ABHs, although the latter play a role in some cases. The opposite occurs for additive ABHs. It is also observed that the complex dispersion curves of periodic ABHs present an intriguing behaviour compared to those usually found in metamaterials, since they tend to disappear at high frequencies, where the local wave intensity is stronger. An explanation of all these facts is given in the case of a periodic SBH, single-leaf and double-leaf embedded ABHs, and pillar and single-leaf additive ABHs.

K-Wave II: Introduction, progress, and road map

k-Wave is an open-source toolbox for simulating the propagation of acoustic and ultrasound waves in complex and tissue-realistic media that is widely used across academia and industry. In this talk, we present an introduction to k-Wave II. k-Wave-II is a major re-write of the original k-Wave toolbox developed with the following aims: (1) re-engineering the code base to leverage object orientated programming, making it simpler to use for model inversions and coupled physics problems, (2) extending the algorithms to facilitate general boundary conditions on arbitrary surfaces, and to increase performance for narrow-band simulations, (3) improving the development and release process to incorporate good practice and advance long-term sustainability, and (4) improving training, user engagement, and support. We will introduce the new toolbox, discuss current progress, and a provide a road map for future development.

Nonlinear periodic ion-acoustic waves in nonthermal plasmas

A Sagdeev pseudopotential analysis is developed for the propagation of nonlinear periodic ion-acoustic waves in a plasma comprising cold fluid ions and various models of nonthermal electron descriptions. In plasma nonlinear wave studies, whether addressing solitary or periodic modes, the more common nonthermal distributions are the Cairns, kappa, and Tsallis models. A mathematically and physically consistent description incorporates three evident properties: there is conservation per cycle of ion and electron densities in addition to ion flux, the solutions reduce for very small amplitudes to linear waves, and the nonlinear periodic structures are generated by a perturbation of the undisturbed equilibrium. After establishing the corresponding general analytical methodology, a numerical analysis is given, with illustrative graphs, for the nonthermal Cairns, superthermal kappa, and nonextensive Tsallis distributions.

Implicit large-eddy simulation of an over-expanded screeching rectangular jet

Implicit large-eddy simulation of an over-expanded screeching rectangular jet is performed with a seventh-order finite difference scheme. Good agreement is found between the predicted flow- and acoustic fields with the experimental observations. Fourier decomposition, phase-averaging analysis and Spectral Proper Orthogonal Decomposition (SPOD) are used to investigate the origin of the screech, the shock leakage during the shear-layer flapping, and the distinguishing fluctuating characteristics in the minor- and major-axis plane of the rectangular jet. It finds that the screech is radiated from the end of the forth shock cell, where the interaction of the shock waves with the shear layer causes periodic leakages of shock-wave tips in the minor-axis plane, resulting in the generation of intense acoustic waves in the surrounding air. An obvious flapping mode at the same frequency of the screech is captured in the minor-axis plane and dominates the dynamic motions of the rectangular jet. The SPOD modes of pressure and velocity fluctuations at the screech frequency help to reveal the relationship between the screech generation and the coherent structures.

Towards Dirac-like physics in ultrasonic crystals

Ultrasonic crystals provide a novel path forward for studying Dirac-like physics in classical systems free from interaction effects and are considered promising candidates for the development of more complex multilayer systems, such as those governed by a Moire pattern. However, no ultrasonic crystal experiment (and to the best of our knowledge no experiment studying classical wave propagation in a hexagonal lattice) has measured linear dispersion along the Dirac cone at the edge of the Brillouin zone where the upper and lower bands touch, which must include a measure of reduced phase and group velocities along the cone. This presentation will discuss experimental and theoretical results on acoustic surface wave propagation in a hexagonal lattice of resonant cavities, which can aid in the observation of such Dirac-like physics for ultrasonic crystals.

Acoustic source localization on finite structures using remote sensors

Acoustic waves are well-suited for remote sensing applications and structural health monitoring purposes because they convey information about their source and can be measured using non-contacting methods. Source localization is an important structural health monitoring task; however, traditional time-of-flight array signal processing techniques used to localize acoustic sources are ill-suited for many structural engineering applications due to the potential for complicated propagation paths, the dispersive propagation of acoustic waves in structures, and the coupling of the vibrating structure and the surrounding medium. Thus, source localization experiments were conducted using matched field processing (MFP) for a 0.9-m diameter round aluminum plate excited by the impact of a 1.3-cm stainless-steel ball bearing dropped from 7.6-cm. A 14-sensor linear remote acoustic array placed 8.9-cm above the plate measured the sound radiated by the 0.64-cm thick plate. MFP array signal processing localization techniques were used along with a physics-based finite element acoustic model to localize the excitation on the structure. Source localization results in both a quiet environment and environment with additive white Gaussian noise are discussed, and these results are compared to those from an acoustic model where plate edge reflections are neglected. [Work was sponsored by a SMART Scholarship and the NEEC.]

Non-reflective hard source method for multiple physically extended sources and scattering bodies

In this paper, we focus on methodologies to inject a noise source in a numerical model of noise propagation in confined domains. This is a problem of primary importance when dealing with propagation of fluid-dynamic induced noise in confined basins, like ships at sea or wind farms. We first assess the performance of the literature hard source (HS) and transparent source methods; successively, we propose a novel method named the non-reflective HS (NRHS) method. It takes advantage of the linearity of the equation governing the propagation of acoustic waves in fluids and is based on the decomposition of the total signal in the sum of direct and reflected signals. It presents the advantages of the hard source method removing the main drawback consisting of the well-known problem of spurious reflections. To check the reliability of the HS vs the NRHS, a non-dimensional parameter (the encumbrance) has been defined, which gives a measure of the extension of the generation domain with respect to the propagation domain in relation to the principal wavelength of the acoustic waves and the presence of reflecting surfaces. The method herein developed gives accurate results in the case of a single-point source, where the literature methods behave well; more importantly, the NRHS method maintains its own accuracy when a noise source needs to be represented by a large number of points in space, situations of very practical importance where the standard methods may exhibit inaccuracy. This is a point of importance since the use of large generation domains is in favor of the accuracy of the source characterization, which can exhibit a complex directivity. The new method has been tested in a number of archetypal situations characterized by the presence of a reflecting plane, a scattering body close to the source location, and two sources placed side by side. In all cases, the method has shown its own superiority with respect to the standard HS method, still preserving the flexibility and simplicity of the latter.

Leak detection in an operational underground water distribution network using active acoustics

Leaks present in the water distribution networks (WDNs) lead to an enormous loss of a valuable resource, not only affecting the economic efficiency of water utilities but also posing significant potential safety hazards, and an increased burden on infrastructure maintenance. In the past, several studies have focused on passive acoustic-based leak detection by primarily sensing and analyzing the acoustic signals emitted from the leak source. In this study, we installed a low-frequency transducer in the water column of an operational WDN near Los Angeles, California, and excited the system using steady-state sinusoidal and sine burst signals. The acoustic pressure signals inside the pipe network were measured at multiple locations using state-of-the-art hydrophone-enabled devices retrofitted to fire hydrants. The experiments were conducted in the presence of a simulated leak in the network. The leak acts as an impedance discontinuity for the acoustic wave propagation, and therefore, the excited signals undergo partial reflection at the leak location. Based on signal processing techniques, we attempt to detect and localize the leaks in the WDN. The goal of using the active acoustics is to detect small leaks and increase the range of sensing.

Acoustic emissions based estimation of the temporal changes in microbubble radius during ultrasonic excitation

Our ability to study microbubble dynamics in vivo and link them to distinct mechano-biological effects hinges on our ability to accurately estimate the temporal changes in MB radius during ultrasonic excitation. Here, we hypothesize that real-time passive cavitation detection (PCD) monitoring combined with linear acoustic wave propagation theory can accurately estimate stable MB radius dynamics under in vivo conditions. To test our hypothesis, we employed numerical simulations, based on Rayleigh–Plesset modeling, followed by experimental validation, using calibrated PCDs with concurrent optical imaging of MB dynamics using high frame rate microscopy. Our method termed linear acoustic wave propagation and superposition (LAWPS) algorithm, combines Fourier series expansion with Euler’s relationship to estimate the acoustic emission (AE) from single MB, which is considered as a monopole source (i.e., R0 + ΔR < λ). LAWPS algorithm, which is independent of MB properties and, thus, can be linearly reversed to calculate MB oscillation radius from AE, was able to accurately capture the radiated pressure generated from a Rayleigh–Plesset MB modeling. Crucially, inverse LAWPS algorithm onto AE generated by Vokurka et al. resulted in the original MB model. Experimental observation using monodisperse MBs was able to accurately estimate the temporal changes in MB radius during 0.5 MHz ultrasonic excitation

ASA's computational acoustics Technical Committee

Computational acoustics is in its second full year as a Technical Committee, after being promoted from a Technical Specialty Group in May 2022. The CA TC provides a forum for researchers interested in numerical methods pertinent to acoustic wave propagation and structures, data analytics, validation, optimization, visualization, as well as application of computational models to engineering, noise control, and other practical problems. Some areas of current and emerging interest include artificial intelligence, uncertainty characterization, model reduction techniques, efficient parallelization, and time-domain treatments of dissipation. The CA TC is also interested in building collaborations with other TCs on repositories and benchmarks for codes and data.

Numerical simulation of sound attenuation in an acoustically lined duct in high-temperature air flows

Noise reduction structures are important for the vibration and noise reduction design of aerospace engines. The design of noise-reducing structures often needs to be quickly evaluated via numerical simulations. Hence, the simulation results of the corresponding system are very important for guiding the design of noise-reducing structures. High temperature is one of the key environmental factors that need to be considered when evaluating the sound attenuation process via numerical methods. In this study, numerical simulations of acoustic wave propagation on an acoustic liner structure considering air temperature variations are carried out by using compressible Navier–Stokes equations and the ideal gas equation of state. The results showed that the effect of temperature on sound attenuation under grazing flow conditions is complex. Moreover, an increase in temperature will reduce the transmission loss of the acoustic liner in the grazing flow at high air speed.

Propagation of dust ion acoustic waves with Riesz fractional derivative

Propagation of dust ion acoustic waves with Riesz fractional derivative

Numerical investigation of the effect of bubble properties on the linear resonance frequency shift due to inter-bubble interactions in ultrasonically excited lipid coated microbubbles

Ultrasonically excited microbubbles (MBs) have numerous applications in various fields, such as drug delivery, and imaging. Ultrasonically excited MBs are known to be nonlinear oscillators that generate secondary acoustic emissions in the media when excited by a primary ultrasound wave. The propagation of acoustic waves in the liquid is limited to the speed of sound, resulting in each MB receiving the primary and secondary waves at different times depending on their distance from the ultrasound source and the distance between MBs. These delays are referred to as primary and secondary delays, respectively. A previous study demonstrated that the inclusion of secondary delays in a model describing the interactions between MBs exposed to ultrasound results in an increase in the linear resonance frequency of MBs as they approach each other. This work investigates the impact of various MB properties on the change in linear resonance frequency resulting from changes in inter-bubble distances. The effects of shell properties, including the initial surface tension, surface dilatational viscosity of the shell monolayer, elastic compression modulus of the shell, and the initial radius of the MBs, are examined. MB size is a significant factor influencing the rate of linear resonance frequency increase with increasing concentration. Moreover, it is found that the shell properties of MBs play a negligible role in the rate of change in linear resonance frequency of MBs as the inter-bubble distances change.The findings of this study have implications for various applications of MBs in the biomedical field. By understanding the impact of inter-bubble distances and shell properties on the linear resonance frequency of MBs, the utilization of MBs in applications reliant on their resonant behavior can be optimized.

Deep Dive into the factors influencing acoustic velocity in the Dalan-Kangan formations, the central Persian Gulf

The propagation of acoustic waves in rocks is directly influenced by the rocks’ elastic properties. To evaluate petrophysical properties from acoustic data, it is essential to understand the factors that influence the variations in acoustic velocity of sedimentary rocks. Carbonate reservoirs are heterogeneous, and their evaluation is complicated. A closer look at the factors affecting the elastic properties of these rocks is essential because they reveal important information about the reservoir properties and their formation evaluation. Rock physics modeling relies on laboratory-measured acoustic data. This study, however, employs acoustic logs to elucidate the key factors influencing sonic velocity, offering a more comprehensive and field-applicable perspective. Samples were prepared from the Permian–Triassic Upper Dalan and Kangan formations. Porosity, permeability, sedimentary textures, mineralogy, and pore types were investigated. Furthermore, compressional, shear, and Stoneley well-logs data were recorded and converted to acoustic velocity in the sampled interval. Porosity-velocity modeling based on the differential effective medium (DEM) theory was performed for different values of equivalent pore aspect ratio (EPAR). The results show that there is a strong inverse relationship between acoustic velocities and porosity. Acoustic velocities also exhibit an inverse correlation with permeability, but the strength of these relationships is relatively weak. Acoustic velocities are not affected by carbonate textures. A specific texture may exhibit different velocities due to the influence of diagenetic processes. Mineralogy has only a minor influence on acoustic velocities. Dolostones have a slightly higher velocity than limestones, but the difference is insignificant. Stoneley log values are slightly different in limestone and dolostone, because this wave propagates along the mud-borehole interface. The velocities were affected by the variations in pore types within the studied formations. Therefore, in carbonate rocks, porosity, and the pore types play a significant role in controlling acoustic velocities. The value of EPAR = 0.15 can be considered as the boundary between stiff pores (moldic and vuggy) and soft pores (interparticle, intercrystalline, micro-intercrystalline, and microporosity). The lower EPAR value of interparticle pores in limestones compared to dolostones can be attributed to diagenetic processes such as dolomitization and compaction. The findings of this study can help to better understand what factors affect acoustic velocity in carbonate rocks. This study also shows that acoustic logs data can be effectively used in rock physics modeling and pore type identification. By identifying the pore types, it is possible to recognize diagenetic processes and determine the rock types to control the heterogeneity and estimate reservoir quality.

The effect of 3D surface roughness on acoustic wave propagation in a cylindrical waveguide

This paper studies the acoustic wave scattering and attenuation in a cylindrical waveguide (pipe) with wall roughness varying along all three dimensions and roughness height smaller than the acoustic wavelength. Using the decomposition of the acoustic wave field into deterministic and random components, small perturbation method and Fourier transform the analytical solution of a 3-D averaged acoustic wave field is obtained. The correction term describing the mechanism of wave attenuation caused by roughness and determined by the modal cross-talk is also derived. The solution for the plane wave is validated in the frequency range extended well beyond the second cut-off frequency, where the crosstalk between the fundamental and non-axisymmetric modes are observed. The analytical solution is compared with the numerical results obtained with the Monte-Carlo method and Finite Element solver. The numerical study results have demonstrated a close agreement with the analytical solution for the averaged sound field, dispersion curves, and the wave attenuation effect expressed as the wavenumber correction term. A key novelty of this work is a comprehensive analysis of wave dispersion and cut-off frequency changes due to the presence of 3-D wall roughness in a pipe.