Propagation Direction Research Articles

Design and simulation implementation of bismuth-doped fiber laser

Rare-earth doped fibers are an important means of expanding the wavelength band of optical fibers. Currently, researchers aim to broaden the working wavelength band of optical fibers by doping with different rare-earth elements, thereby increasing the amount of information that can be transmitted. In this paper, a bismuth-doped fiber laser operating around 1300nm was designed. A basic physical model for implementing a bismuth-doped fiber laser was proposed based on the energy levels and transition processes of bismuth, rate, and power propagation equations. It was possible to determine the link between pump power and laser power at a wavelength of 1300 nm by modeling tests using the physical model. Additionally, the relationship between pump light and laser power in bismuth-doped fiber at different positions and propagation directions was analyzed. Suggestions for the future large-scale application of bismuth-doped fiber lasers around the 1300nm wavelength band were provided.

Parameter Extraction of Accelerated Moving Targets under Non-Quasi-Axial Incidence Conditions Based on Vortex Electromagnetic Wave Radar

Vortex electromagnetic wave radar carrying orbital angular momentum can compensate for the deficiency of planar electromagnetic wave radar in detecting motion parameters perpendicular to the direction of electromagnetic wave propagation, thus providing more information for target recognition, which has become a hot research field in recent years. However, existing research makes it difficult to obtain the acceleration and rotation centers of targets under non-quasi-axial incidence conditions of vortex electromagnetic waves. Based on this, this article proposes a variable speed motion target parameter extraction method that combines single element and total element echoes. This method can achieve three-dimensional information extraction of radar targets based on a uniform circular array (UCA). Firstly, we establish a non-quasi-axis detection echo model for variable-speed moving targets and extract echoes from different array elements. Then, a single element echo is used to extract the target’s range slow time profile and obtain the target’s rotation center z coordinate. We further utilize the target linear, angular Doppler frequency shift extremum, and median information to extract parameters such as target acceleration, tilt angle, rotation radius, and rotation center x and y coordinates. We analyzed the impact of different signal-to-noise ratios and motion states on parameter extraction. The simulation results have verified the effectiveness of the proposed algorithm.

An Experimental Study on Premixed Methane-Air Flame Propagation with Intrinsic Instabilities in a Hele-Shaw Chamber at Various Inclined Angles

ABSTRACT Flame propagation in narrow gaps can manifest intrinsic instabilities with appearance of wrinkles/cells on the reaction front, which is attributed to various physical mechanisms. For instance, the buoyancy effect is believed to be able to either stabilize or destabilize the reaction front depending on the flame propagation direction. In this paper, an experimental study of propagation of premixed methane-air flames at a variety of mixture equivalence ratios (from fuel-lean to fuel-rich) in a narrow gap (12 mm) formed by two parallel plates (termed Hele-Shaw chamber) is conducted. The magnitude of the gravitational component along the direction of flame propagation is manipulated via altering the inclined angle of the rotatable combustion chamber. Evolution features of flame-surface shapes during the propagation process under various conditions are recorded using high-speed imaging. Results show that generations of the flame wrinkles/cells are mainly driven by the Darrieus-Landau (DL) and Rayleigh-Taylor (RT) instability. For slowly propagating flames at an extremely fuel-lean condition, the RT is a pronounced mechanism, showing a stabilizing effect for downward propagating flames and a destabilizing effect for upward propagating ones. For the fast burning system at higher equivalence ratios, the DL plays a predominant role in generating instabilities among all the chamber inclined angles while the RT’s effect is noticeably weakened.

Spin‐Orbit Torque Switching of Magnetization in Ultra‐Thick Ferromagnetic Layers

AbstractCurrent‐induced magnetization switching via spin‐orbit torque (SOT) holds great potential for applications in high‐speed and energy‐efficient magnetic memory and logic devices. In the extensively studied heavy metal/ferromagnet (HM/FM) SOT heterostructures, the thickness of the FM layer is typically restricted to a few nanometers or less due to the rapid spin dephasing, making it challenging to implement thermally stable memory cells with high density. In this study, it is demonstrated that this thickness constraint can be significantly alleviated by utilizing an oxide ferromagnet La0.67Sr0.33MnO3 (LSMO). Through electrical transport and magnetic optical measurements, it is found that the SOT can switch the magnetization in Pt/LSMO heterostructures even at an LSMO thickness of 35 nm, which is one order of magnitude larger than that for metallic FMs, such as CoFeB. Furthermore, based on the FM thickness dependence of the switching current and the domain switching type revealed by magnetic optical Kerr effect imaging (MOKE), a possible picture is proposed to describe the SOT switching in Pt/LSMO, which highlights the critical role of the domain wall propagation in the vertical direction. The work provides valuable insights into the behavior of SOT switching in ultra‐thick FM films, offering new possibilities for their practical applications.

Impact of substrate thickness and surface roughness on Al/Ni multilayer reaction kinetics

Reactive multilayers comprising alternating nanoscale layers of Al and Ni, exhibit potential across various applications, including localized heating for welding and joining. Control over reaction properties is pivotal for emerging applications, such as chemical time delays or neutralization of biological or chemical weapons. This research offers insights into the intricate interplay between substrate thickness, surface roughness, and the behavior of Al/Ni reactive multilayers, opening avenues for tailored applications in various domains. To observe this interplay, silica with various thicknesses from 0.4 µm to 1.6 µm was deposited on polished single crystalline Si and rough poly‐Si base substrates. Additionally, to analyze the impact of varying silica thickness along the sample length on reaction behavior, silica in step‐like shape was fabricated. Subsequently, Al/Ni multilayers with 5 µm total thickness and 20 or 50 nm bilayer periodicities were deposited. Reaction velocity and temperature were monitored with a high‐speed camera and pyrometer. Results indicate that silica thickness significantly affects self‐propagation in multilayers. The reaction is not self‐sustained for silica layers ≤ 0.4 µm, depending on bilayer periodicity and substrate roughness. The velocity increases or decreases based on the direction of reaction propagation, whether it moves upwards or downwards, in relation to the thickness of silica.This article is protected by copyright. All rights reserved.

Dispersion and absorption effects in the linearized Euler–Heisenberg electrodynamics under an external magnetic field

In this paper, the effects of the Ohmic and magnetic density currents are investigated in the linearized Euler–Heisenberg (EH) electrodynamics (ED). The linearization is introduced through an external magnetic field, in which the vector potential of the EH ED is expanded around a magnetic background field that we consider uniform and constant in this paper. From the EH linearized equations, we obtain the solutions for the refractive index associated with the electromagnetic wave superposition, when the current density is ruled by the Ohm law, and in the second case, when the current density is set by an isotropic magnetic conductivity. These solutions are functions of the magnetic background [Formula: see text] of the wave propagation direction [Formula: see text]. It also depends on the conductivity and on the wave frequency. As a consequence, the dispersion and the absorption of plane waves change when [Formula: see text] is parallel to [Formula: see text] in relation to the case of [Formula: see text] perpendicular to [Formula: see text] in the medium. The characteristics of the refraction index are related to direction of [Formula: see text] and of the wave polarization, where there is an open discussion for the birefringence in this medium.

Topological valley Hall polariton condensation.

A photonic topological insulator features robust directional propagation and immunity to defect perturbations of the edge/surface state. Exciton-polaritons, that is, the hybrid quasiparticles of excitons and photons in semiconductor microcavities, have been proposed as a tunable nonlinear platform for emulating topological phenomena. However, mainly due to excitonic material limitations, experimental observations so far have not been able to enter the nonlinear condensation regime or only show localized condensation in one dimension. Here we show a topological propagating edge state with polariton condensation at room temperature and without any external magnetic field. We overcome material limitations by using excitonic CsPbCl3 halide perovskites with a valley Hall lattice design. The polariton lattice features a large bandgap of 18.8 meV and exhibits strong nonlinear polariton condensation with clear long-range spatial coherence across the critical pumping density. The geometric parameters and material composition of our nonlinear many-body photonic system platform can in principle be tailored to study topological phenomena of other interquasiparticle interactions.

Earthquake source impacts on the generation and propagation of seismic infrasound to the upper atmosphere

Summary Earthquakes with moment magnitude (Mw) ranging from 6.5 to 7.0 have been observed to generate sufficiently strong acoustic waves (AWs) in the upper atmosphere. These AWs are detectable in Global Navigation Satellite System satellite signals-based total electron content (TEC) observations in the ionosphere at altitudes ∼250-300 km. However, the specific earthquake source parameters that influence the detectability and characteristics of AWs are not comprehensively understood. Here, we extend our approach of coupled earthquake-atmosphere dynamics modeling by combing dynamic rupture and seismic wave propagation simulations with two- and three-dimensional atmospheric numerical models, to investigate how the characteristics of earthquakes impact the generation and propagation of AWs. We developed a set of idealized dynamic rupture models varying faulting types and fault sizes, hypocentral depths and stress drops. We focus on earthquakes of Mw 6.0-6.5, which are considered the smallest detectable with TEC, and find that the resulting AWs undergo nonlinear evolution and form acoustic shock N-waves reaching thermosphere at ∼90-140 km. The results reveal that the magnitude of the earthquakes is not the sole or primary factor determining the amplitudes of AWs in the upper atmosphere. Instead, various earthquake source characteristics, including the direction of rupture propagation, the polarity of seismic wave imprints on the surface, earthquake mechanism, stress drop, and radiated energy, significantly influence the amplitudes and periods of AWs. The simulation results are also compared with observed TEC fluctuations from AWs generated by the 2023 Mw 6.2 Suzu (Japan) earthquake, finding preliminary agreement in terms of model-predicted signal periods and amplitudes. Understanding these nuanced relationships between earthquake source parameters and AW characteristics is essential for refining our ability to detect and interpret AW signals in the ionosphere.

Low-loss and broadband arbitrary ratios 1 × 2 power splitter based on asymmetrically tapered multimode interference

This work presents a low-loss and broadband 1 × 2 power splitter with arbitrary power splitting ratios (PSRs) based on asymmetrically tapered multimode interference. The asymmetrically input tapered waveguide is employed to gradually alter the direction of light propagating in the multimode region. Experimental results show that the device can maintain low losses (∼0.2–0.4 dB) with adjusted PSRs ranging from 50%:50% to 75%:25% at 1550 nm. The adjustable range of PSRs can be extended by increasing the asymmetry of the structure. Additionally, its performance is weakly dependent on wavelength within the range of 1530–1565 nm. Benefiting from the gradual alteration of the direction of light propagation, the device exhibits a low output phase difference of ±8.7°, and the maximum phase deviation is below 6.2° over the wavelength range from 1500 nm to 1600 nm.

A Comparison of WaveNet and XGBoost for traditional direct wave propagation and seismic inversion using horizontal layer models

The application of machine learning in geophysics has steeply increased in the last decade, with the quality of its results varying according to the type of seismic problem in focus and the employed computational method. Deep Learning methods are achieving impressive results in this area, but we note that there is still a lack of certainty on whether classical machine learning methods can provide similar results. In the present paper, the objective was to attempt to fill part of that gap, by comparing a well-known non-DL machine-learning method with a DL method for the direct wave propagation and the seismic inversion problems for 2D horizontally-layered models. Both methods are evaluated in different scenarios, but under similar conditions, so that it is possible to understand the effect of parameter configuration on their final results. The dataset has 20,000 samples, each consisting of three vectors: a velocity vector with 236 values (representing a vertical profile of a randomly generated 2D layered model), a reflective vector with 600 values obtained directly from the velocity vector, and the associated seismogram vector with 11 traces, each containing 600 values. The overall results show that the WaveNet produces a lower Mean Squared Error between predicted and correct outputs than that of XGBoost. One challenge yet not dealt with is that the WaveNet can train well in GPU, but we did not succeed in doing the same with the XGBoost, due to the amount of data to be processed.

Experimental and numerical studies of the effects of micro/nano carbon fibers in the dynamic behavior of cement-based grouting materials for reinforcement of sand layers

Geological hazards of sand layers pose a serious threat to engineering safety. Grouting reinforcement technology is widely used in such conditions due to its convenience, economy, and effectiveness. To explore the reinforcement effect of carbon fiber (CF) modified cement-based grouting materials on sand layers, grouting solidified bodies (GSB) with CF contents of 0.0%, 0.5%, 1.0%, and 1.5% are selected for Split Hopkinson Pressure Bar (SHPB) impact tests, scanning electron microscope (SEM) scanning, and numerical simulation experiments. The mechanical properties of specimens under dynamic impact conditions and the reinforcement mechanism of CF are studied. Results show that GSB is a strain-rate-dependent material. With the increase of impact rate, peak stress, incident energy, transmitted energy, and dissipated energy of specimens gradually increase, while the integrity of specimens decreases. The CF content remarkably affects the mechanical properties of specimens. When the impact rate is constant, with the increase of CF content, the peak stress and transmitted energy of specimens show a decreasing–increasing– decreasing trend, and the performance of CF-1.0% specimens is optimal. The cement matrix is the main energy storage and release medium, accounting for 97.66% of the energy. When damaged, the cement matrix is mainly fractured. At the microcrack tip, CF influences the direction of crack propagation, reducing the radius of crack propagation, and the main failure mode of CF is debonding. CF can substantially improve the mechanical properties of specimens and reduce the number of cracks. Compared with CF-0.0%-cementitious material (CM) specimens, the peak stress of CF-1.0%-CM specimens is increased by 19.98%. The magnitude of CF force is related to the angle between crack and CF. As the angle increases from 0° to 90°, the CF force gradually increases, reaching the maximum at 90°, with an increase of 133.82%. At this angle, the anti-cracking effect of CF is most substantial. The research results can provide technical support for sand layer grouting reinforcement technology.

Directional switching of surface plasmons in a parity-time-symmetric insulator-metal-insulator structure

In the present work, we study the generation and propagation of surface plasmon polaritons (SPPs) in a geometrically flat insulator-metal-insulator (IMI) structure with parity-time (PT) symmetric modulation on the dielectric layers. Unidirectional SPPs are generated by PT-symmetric modulation. Moreover, magnetic field switching is obtained between two metal-dielectric interfaces. It has been noticed that the metal thickness affects the oscillation frequency of excited SPPs along the direction of propagation. Also, we report that the field at the upper interface is manipulated by solely maneuvering the permittivity of the bottom dielectric. The magnetic field distribution of the present structure is studied using COMSOL Multiphysics software. To ensure the accuracy and reliability of the simulation results, comprehensive analytical investigations have also been conducted.

Effect of varied beam diameter of picosecond laser on Foturan glass volume microprocessing

Foturan glass is a photosensitive transparent material which has attracted much interest for microfluidic applications due to possibility of volume processing by ultrafast lasers. In this work, we have investigated the effect of picosecond laser on volume processing in Foturan glass when varying the beam diameter incident on a lens. To this end, specific laser focusing configurations have been designed using raytracing models and an analysis protocol has been developed in the lens focusing region in order to describe the focal point displacement occurring at the variation of the incident laser beam diameter. The numerically simulated results were explained in association with Rayleigh length and found to be in good agreement with the experimental data obtained at well-defined conditions. Specifically, it was found that the hollow microstructures developed by thermal treatment and chemical etching after laser irradiation were significantly displaced along the propagation direction when the incident beam diameter varied in the range of 1-3.5 times. This approach aims to bring an essential contribution to the field of ultrashort pulse lasers micro- and nanoprocessing in transparent materials proving that the laser beam focus position and its size can be precisely controlled with high precision by automated optics for the variation of incident laser beam diameter in predefined conditions. This approach has the potential for laser multi-beam processing at various volume depths using the same optics setup and may even be applicable to two-photon excitation microscopy. On the other hand, the processing protocol in Foturan glass may allow understanding transparent material modification by tailoring laser beam characteristics.

Coexistence of varied intensities, phases, and polarization states along the direction of beam propagation

Polarization state, as one of the fundamental properties of light fields, has found widespread applications across various domains. The control of intensity, phase, and polarization state along the direction of beam propagation has opened up new avenues for beams. In this work, we generated a beam in which different intensities, phases, and polarization states can simultaneously appear at different positions along the direction of beam propagation. In other words, varied intensities, phases, and polarization states can coexist in the direction of beam propagation. The correctness of this method is validated through theoretical analysis and experimental results. This approach expands the application scope of light beams and provides a favorable path for exploring the optical characteristics of beams.

Self-healing propagation of a longitudinally varying vector optical beam for distance measurement.

Based on the longitudinal manipulation of polarization, a special vector optical beam (VOB) with customized polarization variation in propagation direction can be generated, whose properties and applications remain to be studied. Here, the self-healing propagation behaviors of the longitudinally varying VOB after an opaque object are investigated, and the localized polarization responses on the object distance are revealed. On this basis, characteristic parameters are defined to measure the distance of object, achieving a minimum relative error of 0.63% in a longitudinal range of 300 mm. Besides, the correlations and uncoupling methods of object distance and size are discussed. Our studies open new ways to use the structural properties of VOB and may be instructive for laser measurement.

Free Electron-Plasmon Coupling Strength and Near-Field Retrieval through Electron Energy-Dependent Cathodoluminescence Spectroscopy.

Tightly confined optical near fields in plasmonic nanostructures play a pivotal role in important applications ranging from optical sensing to light harvesting. Energetic electrons are ideally suited to probing optical near fields by collecting the resulting cathodoluminescence (CL) light emission. Intriguingly, the CL intensity is determined by the near-field profile along the electron propagation direction, but the retrieval of such field from measurements has remained elusive. Furthermore, the conditions for optimum electron near-field coupling in plasmonic systems are critically dependent on such field and remain experimentally unexplored. In this work, we use electron energy-dependent CL spectroscopy to study the tightly confined dipolar mode in plasmonic gold nanoparticles. By systematically studying gold nanoparticles with diameters in the range of 20-100 nm and electron energies from 4 to 30 keV, we determine how the coupling between swift electrons and the optical near fields depends on the energy of the incoming electron. The strongest coupling is achieved when the electron speed equals the mode phase velocity, meeting the so-called phase-matching condition. In aloof experiments, the measured data are well reproduced by electromagnetic simulations, which explain that larger particles and faster electrons favor a stronger electron near-field coupling. For penetrating electron trajectories, scattering at the particle produces severe corrections of the trajectory that defy existing theories based on the assumption of nonrecoil condition. Therefore, we develop a first-order recoil correction model that allows us to account for inelastic electron scattering, rendering better agreement with measured data. Finally, we consider the albedo of the particles and find that, to approach unity coupling, a highly confined electric field and very slow electrons are needed, both representing experimental challenges. Our findings explain how to reach unity-order coupling between free electrons and confined excitations, helping us understand fundamental aspects of light-matter interaction at the nanoscale.

Optofluidic Force Induction Meets Raman Spectroscopy and Inductively Coupled Plasma-Mass Spectrometry: A New Hyphenated Technique for Comprehensive and Complementary Characterizations of Single Particles.

Nanoparticles are produced at accelerating rates, are increasingly integrated into scientific and industrial applications, and are widely discharged into the environment. Analytical techniques are required to characterize parameters such as particle number concentrations, mass and size distributions, molecular and elemental compositions, and particle stability. This is not only relevant to investigate their utility for various industrial or medical applications and for controlling the manufacturing processes but also to assess toxicity and environmental fate. Different analytical strategies aim to characterize certain facets of particles but are difficult to combine to retrieve relevant parameters coherently and to provide a more comprehensive picture. In this work, we demonstrate the first online hyphenation of optofluidic force induction (OF2i) with Raman spectroscopy and inductively coupled plasma-time-of-flight-mass spectrometry (ICP-TOFMS) to harness their complementary technology-specific advantages and to promote comprehensive particle characterizations. We optically trapped individual particles on a weakly focused vortex laser beam by aligning a microfluidic flow antiparallelly to the laser propagation direction. The position of particles in this optical trap depended on the hydrodynamic diameter and therefore enabled size calibration as well as matrix elimination. Additionally, laser light scattered on particles was analyzed in a single particle (SP) Raman spectroscopy setup for the identification of particulate species and phases. Finally, particles were characterized regarding elemental composition and their distributions in mass and size using SP ICP-TOFMS. In a proof of concept, we analyzed polystyrene-based microplastic and TiO2 nanoparticles and demonstrated the opportunities provided through the coupling of OF2i with SP Raman and SP ICP-TOFMS.

Simulation‐Guided Design of Gradient Multilayer Microwave Absorber with Tailored Absorption Performance

AbstractFlexible microwave absorber (MAR), vital in advanced applications such as wearable electronics and precision devices, are highly valued for their lightweight, exceptional electromagnetic waves (EWs), and ease of fabrication. However, optimizing the electromagnetic parameters of microwave absorption materials (MAMs) to enhance absorption ability and expand effective absorption broadband (EAB, reflection loss (RL) <−10 dB) is a considerable challenge. Herein, a permittivity‐attenuation evaluation diagram (PAED) is constructed using parameter scanning based on the Materials Genome Initiative to determine the ideal electromagnetic parameters and thickness, optimize absorption efficiency, and obtain highly efficient absorbers. Guided by the PAED, a multilayer MAR consisting of a “matching‐absorption‐reflection layer” and a dielectric loss gradient aligned with the direction of EWs propagation is developed. This design significantly enhances the EWs penetration and ensures effective absorption, attributed to the well‐matched impedance and attenuation characteristics. As anticipated, the microwave absorption of the absorber (density = 0.063 g cm−3) is optimized, with an RL of −34 dB at d = 4 mm and an EAB covering the entire X‐band (8.2–12.4 GHz). This study presents a novel approach for establishing a material database for MAMs and developing high‐performance absorbers characterized by thinness, lightness, broad operational frequency range, and robust absorption capacity.

Pitchfork bifurcation along a slow parameter ramp: Coherent structures in the critical scaling

AbstractWe investigate the slow passage through a pitchfork bifurcation in a spatially extended system, when the onset of instability is slowly varying in space. We focus here on the critical parameter scaling, when the instability locus propagates with speed , where is a small parameter that measures the gradient of the parameter ramp. Our results establish how the instability is mediated by a front traveling with the speed of the parameter ramp, and demonstrate scalings for a delay or advance of the instability relative to the bifurcation locus depending on the sign of , that is on the direction of propagation of the parameter ramp through the pitchfork bifurcation. The results also include a generalization of the classical Hastings–McLeod solution of the Painlevé‐II equation to Painlevé‐II equations with a drift term.

Experimental study on water replenishment holes in offshore monopiles

Adequate replenishment of water within the monopile foundations of offshore wind turbines is essential to ensure the effective performance of cathodic protection measures applied inside the monopile to combat internal corrosion. This study presents experimental results for the process of replenishing water within a monopile with one opening below the still water level. The results are presented as (1) the relative wave height and set-down inside the monopile under various regular wave conditions and (2) head loss coefficient for the flow in and out of the water replenishment opening in the monopile. The study demonstrates a clear link between the ratio of the wave height of the internal and external surface elevations, the relative wave height, and the dimensions of the opening in the monopile as well as the wave period. Furthermore, a simple predictive model is proposed based on linear wave theory and static energy loss considerations. The orientation of the opening with respect to the wave direction has limited effect on the relative wave height, however it has a distinct effect on the mean surface level (MSL) inside the monopile. The lowest MSL occurred when the opening hole was positioned perpendicular (at a 90-degree angle) to the direction of wave propagation. Geometric considerations suggest that the flow in and out of the cylinder is slightly asymmetric and the results also show a small difference in the head loss coefficient for the flow in and out of the monopile, respectively. On average, however, the head loss coefficient was found to be ζ=2.0.