Osteoblast Proliferation Research Articles

NP-12 peptide functionalized nanoparticles counteract the effect of bacterial lipopolysaccharide on cultured osteoblasts

ObjectiveTo evaluate whether nanoparticles (NPs) functionalized with Tideglusib (TDg, NP-12), and deposited on titanium surfaces, would counteract the effect of bacterial lipopolysaccharide (LPS) on osteoblasts. MethodsExperimental groups were: (a) Titanium discs (TiD), (b) TiD covered with undoped NPs (Un-NPs) and (c) TiD covered with TDg-doped NPs (TDg-NPs). Human primary osteoblasts were cultured onto these discs, in the presence or absence of bacterial LPS. Cell proliferation was assessed by MTT-assay and differentiation by measuring the alkaline phosphatase activity. Mineral nodule formation was assessed by the alizarin red test. Real-time quantitative polymerase chain reaction was used to study the expression of Runx-2, OSX, ALP, OSC, OPG, RANKL, Col-I, BMP-2, BMP-7, TGF-β1, VEGF, TGF-βR1, TGF-βR2, and TGF-βR3 genes. Osteoblasts morphology was studied by Scanning Electron Microscopy. One-way ANOVA or Kruskal-Wallis and Bonferroni multiple comparisons tests were carried out (p < 0.05). ResultsTDg-NPs enhanced osteoblasts proliferation. Similarly, this group increased ALP production and mineral nodules formation. TDg-NPs on titanium discs resulted in overexpression of the proliferative genes, OSC and OSX, regardless of LPS activity. In the absence of LPS, TDg-NPs up-regulated Runx2, COL-I, ALP, BMP2 and BMP7 genes. OPG/RANKL gene ratios were increased about 2500 and 4,000-fold by TDg-NPs, when LPS was added or not, respectively. In contact with the TDg-NPs osteoblasts demonstrated an elongated spindle-shaped morphology with extracellular matrix production. SignificanceTDg-NPs on titanium discs counteracted the detrimental effect of LPS by preventing the decrease on osteoblasts proliferation and mineralization, and produced an overexpression of proliferative and bone-promoting genes on human primary osteoblasts.

In vitro and in vivo investigation of antibacterial silver nanoparticles functionalized bone grafting substitutes.

Infection is a major concern in surgery involving grafting and should be considered thoroughly when designing biomaterials. There is considerable renewed interest in silver nanoparticles (AgNPs) owing to their ability to potentiate antibacterial properties against multiple bacterial strains. This study aimed to develop two antibacterial bone regenerative scaffolds by integrating AgNPs in bovine bone particles (BBX) (Product 1), and a light cross-linked hydrogel GelMA (Product 2). The constructs were characterized using scanning electron microscopy. Metabolic activity of osteoblasts and osteoclasts on the constructs was investigated using PrestoBlue™. Disk diffusion assay was conducted to test the antibacterial properties. The regenerative capacity of the optimized AgNP functionalized BBX and GelMA were tested in a rabbit cranial 6 mm defect model. The presence of AgNPs appears to enhance proliferation of osteoblasts compared to AgNP free controls in vitro. We established that AgNPs can be used at a 100 μg dose that inhibits bacteria, with minimal adverse effects on the bone cells. Our rabbit model revealed that both the BBX and GelMA hydrogels loaded AgNPs were biocompatible with no signs of necrosis or inflammatory response. Grafts functionalized with AgNPs can provide antibacterial protection and simultaneously act as a scaffold for attachment of bone cells.

Cutting-edge collagen biocomposite reinforced with 2D nano-talc for bone tissue engineering

The advancement of nanobiocomposites reinforced with 2D nano-materials plays a pivotal role in enhancing bone tissue engineering. In this study, we introduce a nanobiocomposite that reinforces bovine collagen with 2D nano-talc, a recently exfoliated nano-mineral. These nanobiocomposites were prepared by blending collagen with varying concentrations of 2D nano-talc, encompassing mono- and few-layers talc from soapstone nanomaterial. Extensive characterization techniques including AFM, XPS, nano-FTIR, s-SNOM nanoimaging, Force Spectroscopy, and PeakForce QNM® were employed. The incorporation of 2D nano-talc significantly enhanced the mechanical properties of the nanobiocomposites, resulting in increased stiffness compared to pristine collagen. In vitro studies supported the growth and proliferation of osteoblasts onto 2D nano-talc-reinforced nanobiocomposites, as well as showed the highest mineralization potential. These findings highlight the substantial potential of the developed nanobiocomposite as a scaffold material for bone tissue engineering applications.

A biocompatible nanofibers modified by plasma for osteoblast growth differentiation.

This work employs nitrogen plasma immersion ion implantation (PIII) to modify electrospinning polylactic acid membranes and immobilizes essential fibroblast growth factors(bFGF) by forming cross-linking bonds. The study investigates the modified membranes' surface characteristics and the stimulatory effects of cross-linked bFGF polylactic acid membranes on osteoblast and fibroblast proliferation. The PIII process occurs under low vacuum conditions and is controlled by processing time and power pulse width. The experimental results indicate that, within a 400-second N2-PIII treatment, the spun fibers remain undamaged, demonstrating an increase in hydrophilicity (from 117° to 38°/36°) and nitrogen content (from 0% to 7.54%/8.05%). XPS analysis suggests the formation of a C-N-C=O cross-linked bond. Cell culture and activity assessments indicate that the PIII-treated and cross-linked bFGF film exhibits significantly higher cell growth activity (P<0.05) than the untreated group. These intergroup differences are attributed to the surface cross-linking bond content. In osteogenic induction, the results for each day show that the treated group performs better. However, the intergroup disparities within the cross-linked bFGF group disappear with prolonged culture time due to the rapid osteogenesis prompted by bFGF. The findings suggest that PIII treatment of electrospinning polylactic acid membranes holds promise in promoting osteogenesis in bone tissue scaffolds.

Green Foaming of Biologically Extracted Chitin Hydrogels Using Supercritical Carbon Dioxide for Scaffolding of Human Osteoblasts.

Chitin is a structural polysaccharide abundant in the biosphere. Chitin possesses a highly ordered crystalline structure that makes its processing a challenge. In this study, chitin hydrogels and methanogels, prepared by dissolution in calcium chloride/methanol, were subjected to supercritical carbon dioxide (scCO2) to produce porous materials for use as scaffolds for osteoblasts. The control of the morphology, porosity, and physicochemical properties of the produced materials was performed according to the operational conditions, as well as the co-solvent addition. The dissolution of CO2 in methanol co-solvent improved the sorption of the compressed fluid into the hydrogel, rendering highly porous chitin scaffolds. The chitin crystallinity index significantly decreased after processing the hydrogel in supercritical conditions, with a significant effect on its swelling capacity. The use of scCO2 with methanol co-solvent resulted in chitin scaffolds with characteristics adequate to the adhesion and proliferation of osteoblasts.

Smart gradient coating suitable for bone growth prepared on plasma-electrolytically oxidised Mg and its sequential degradation behaviour

A gradient coating containing collagen and inorganic strontium/calcium phosphate (Sr/CaP) was fabricated on plasma-electrolytically oxidised magnesium via one-step cathodic electrodeposition. First, Sr-doped dicalcium phosphate dihydrate and hydroxyapatite (DCPD and HA) was deposited, followed by a collagen/CaP layer. The morphological evolution, sequential degradation behaviour, and in vitro bio-properties of the coatings were investigated. The incorporation of collagen remarkably refined the morphology of the CaP, and a more aggregated nano-spherical morphology was observed with increasing collagen concentration. Sr could partially replace Ca in the CaP crystals. Collagen combined with CaP formed a relatively stable skeletal frame, which provided sufficient barrier properties and more sites for the re-precipitation of bone tissue, as well as a more promising proliferation and differentiation ability of osteoblasts. A gradient coating that matches the requirements of bone growth at various periods is suggested for implantation.

Retraction Note: LncRNA UCA1 affects osteoblast proliferation and differentiation by regulating BMP-2 expression.

The article "LncRNA UCA1 affects osteoblast proliferation and differentiation by regulating BMP-2 expression", by R.-F. Zhang, J.-W. Liu, S.-P. Yu, D. Sun, X.-H. Wang, J.-S. Fu, Z. Xie, published in Eur Rev Med Pharmacol Sci 2019; 23 (16): 6774-6782-DOI: 10.26355/eurrev_201908_18715-PMID: 31486475 has been retracted by the authors for the following reasons: - The data presented in the manuscript require further validation, which may affect the results. After careful consideration, we have decided to withdraw it to ensure its reliability and reproducibility. All authors concur with this decision. This article has been retracted. The Publisher apologizes for any inconvenience this may cause. https://www.europeanreview.org/article/18715.

A Simple and Cost-Effective FeCl3-Catalyzed Functionalization of Cellulose Nanofibrils: Toward Adhesive Nanocomposite Materials for Medical Implants.

In the present work, we explored Lewis acid catalysis, via FeCl3, for the heterogeneous surface functionalization of cellulose nanofibrils (CNFs). This approach, characterized by its simplicity and efficiency, facilitates the amidation of nonactivated carboxylic acids in carboxymethylated cellulose nanofibrils (c-CNF). Following the optimization of reaction conditions, we successfully introduced amine-containing polymers, such as polyethylenimine and Jeffamine, onto nanofibers. This introduction significantly enhanced the physicochemical properties of the CNF-based materials, resulting in improved characteristics such as adhesiveness and thermal stability. Reaction mechanistic investigations suggested that endocyclic oxygen of cellulose finely stabilizes the transition state required for further functionalization. Notably, a nanocomposite, containing CNF and a branched low molecular weight polyethylenimine (CNF-PEI 800), was synthesized using the catalytic reaction. The composite CNF-PEI 800 was thoroughly characterized having in mind its potential application as coating biomaterial for medical implants. The resulting CNF-PEI 800 hydrogel exhibits adhesive properties, which complement the established antibacterial qualities of polyethylenimine. Furthermore, CNF-PEI 800 demonstrates its ability to support the proliferation and differentiation of primary human osteoblasts over a period of 7 days.

Liraglutide, a glucagon-like peptide-1 receptor agonist, inhibits bone loss in an animal model of osteoporosis with or without diabetes.

Liraglutide (Lrg), a novel anti-diabetic drug that mimics the endogenous glucagon-like peptide-1 to potentiate insulin secretion, is observed to be capable of partially reversing osteopenia. The aim of the present study is to further investigate the efficacy and potential anti-osteoporosis mechanisms of Lrg for improving bone pathology, bone- related parameters under imageology, and serum bone metabolism indexes in an animal model of osteoporosis with or without diabetes. Eight databases were searched from their inception dates to April 27, 2024. The risk of bias and data on outcome measures were analyzed by the CAMARADES 10-item checklist and Rev-Man 5.3 software separately. Seventeen eligible studies were ultimately included in this review. The number of criteria met in each study varied from 4/10 to 8/10 with an average of 5.47. The aspects of blinded induction of the model, blinding assessment of outcome and sample size calculation need to be strengthened with emphasis. The pre-clinical evidence reveals that Lrg is capable of partially improving bone related parameters under imageology, bone pathology, and bone maximum load, increasing serum osteocalcin, N-terminal propeptide of type I procollagen, and reducing serum c-terminal cross-linked telopeptide of type I collagen (P<0.05). Lrg reverses osteopenia likely by activating osteoblast proliferation through promoting the Wnt signal pathway, p-AMPK/PGC1α signal pathway, and inhibiting the activation of osteoclasts by inhibiting the OPG/RANKL/RANK signal pathway through anti-inflammatory, antioxidant and anti-autophagic pathways. Furthermore, the present study recommends that more reasonable usage methods of streptozotocin, including dosage and injection methods, as well as other types of osteoporosis models, be attempted in future studies. Based on the results, this finding may help to improve the priority of Lrg in the treatment of diabetes patients with osteoporosis.

Resorbable engineered barrier membranes for oral surgery applications.

Population aging, reduced economic capacity, and neglecting the treatments for oral pathologies, are the main causal factors for about 3 billion individuals who are suffering from partial/total edentulism or alveolar bone resorption: thus, the demand for dental implants is increasingly growing. To achieve a good prognosis for implant-supported restorations, adequate peri-implant bone volume is mandatory. The Guided Bone Regeneration (GBR) technique is one of the most applied methods for alveolar bone reconstruction and treatment of peri-implant bone deficiencies. This technique involves the use of different types of membranes in association with some bone substitutes (autologous, homologous, or heterologous). However, time for bone regeneration is often too long and the bone quality is not simply predictable. This study aims at engineering and evaluating the efficacy of modified barrier membranes, enhancing their bioactivity for improved alveolar bone tissue regeneration. We investigated membranes functionalized with chitosan (CS) and chitosan combined with the peptide GBMP1α (CS + GBMP1α), to improve bone growth. OsseoGuard® membranes, derived from bovine Achilles tendon type I collagen crosslinked with formaldehyde, were modified using CS and CS + GBMP1α. The functionalization, carried out with 1-ethyl-3-(3 dimethylaminopropyl)carbodiimide and sulfo-N-Hydroxysuccinimide (EDC/sulfo-NHS), was assessed through FT-IR and XPS analyses. Biological assays were performed by directly seeding human osteoblasts onto the materials to assess cell proliferation, mineralization, gene expression of Secreted Phosphoprotein 1 (SPP1) and Runt-Related Transcription Factor 2 (Runx2), and antibacterial properties. Both CS and CS + GBMP1α functionalizations significantly enhanced human osteoblast proliferation, mineralization, gene expression, and antibacterial activity compared to commercial membranes. The CS + GBMP1α functionalization exhibited superior outcomes in all biological assays. Mechanical tests showed no significant alterations of membrane biomechanical properties post-functionalization. The engineered membranes, especially those functionalized with CS + GBMP1α, are suitable for GBR applications thanks to their ability to enhance osteoblast activity and promote bone tissue regeneration. These findings suggest a potential advancement in the treatment of oral cavity problems requiring bone regeneration.

Facile fabrication of linezolid/strontium coated hydroxyapatite/graphene oxide nanocomposite for osteoporotic bone defect

Hydroxyapatite (HAp) coatings currently have limited therapeutic applications because they lack anti-infection, osteoinductivity, and poor mechanical characteristics. On the titanium substrate, electrochemical deposition (ECD) was used to construct the strontium (Sr)-featuring hydroxyapatite (HAp)/graphene oxides (GO)/linezolid (LZ) nanomaterial coated with antibacterial and drug delivery properties. The newly fabricated nanomaterials were confirmed by X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis and morphological features were examined by scanning electron microscope (SEM) analysis. The results reveal multiple nucleation sites for SrHAp/GO/LZ composite coatings due to oxygen-comprising moieties on the 2D surface of GO. It was shown to be favorable for osteoblast proliferation and differentiation. The elastic modulus and hardness of LZ nanocomposite with SrHAp/GO/LZ coatings were increased by 67 % and 121 %, respectively. An initial 5 h burst of LZ release from the SrHAp/GO/LZ coating was followed by 14 h of gradual release, owing to LZ's physical and chemical adsorption. The SrHAp/GO/LZ coating effectively inhibited both S. epidermidis and S. aureus, and the inhibition lasted for three days, as demonstrated by the inhibition zone and colony count assays. When MG-63 cells are coated with SrHAp/GO/LZ composite coating, their adhesion, proliferation, and differentiation greatly improve when coated with pure titanium. A novel surface engineering nanomaterial for treating and preventing osteoporotic bone defects, SrHAp/GO/LZ, was shown to have high mechanical characteristics, superior antibacterial abilities, and osteoinductivity.

Biological activity of tantalum oxide coating doped with calcium and strontium by micro-arc oxidation under osteoimmunomodulation

Tantalum is widely used in clinics due to its excellent properties. However, its high density and elastic modulus constrain its application as a large implant. The new porous tantalum material addresses the issue of incompatibility between the implant and the human body. Nevertheless, it still exhibits biological inertia and limited bone-bonding ability; therefore, it is necessary to modify its surface. At present, some surface modification methods have inconsistent results in vitro and in vivo. To solve this problem, this study described the preparation of a ceramic coating with a "trabeculae-like" structure on the surface of pure tantalum using micro-arc oxidation (MAO). Calcium and strontium ions were introduced by adding acetate to the electrolyte. The effects of incorporating bioactive ions Ca2+ and Sr2+ into the electrolyte on the coating's morphology, coating thickness, phase composition, roughness, hydrophilicity, and the activity of MC3T3-E1 osteoblast cells under osteoimmunomodulation were investigated. The results demonstrated that the introduction of bioactive ions did not change the porous morphology of the coating; instead, it led to an increase in coating thickness, enhancement of surface roughness and hydrophilicity, as well as promotion of osteoblast spreading, proliferation, and ALP activity. Moreover, it regulated the phenotypic polarization of RAW264.7 macrophages to augment osteoblast proliferation, spreading, and ALP activity, implying that the coating has superior osteogenic potential under osteoimmunomodulation.

Polydopamine-mediated immobilization of BMP-2 onto electrospun nanofibers enhances bone regeneration

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF from α to β, thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold’s characters were examined using SEM and XRD. To assess its osteogenic effects in vitro, we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes. In vivo, bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold’s effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects.

Gprc5a is a novel parathyroid hormone-inducible gene and negatively regulates osteoblast proliferation and differentiation.

Teriparatide is a peptide derived from a parathyroid hormone (PTH) and an osteoporosis therapeutic drug with potent bone formation-promoting activity. To identify novel druggable genes that act downstream of PTH signaling and are potentially involved in bone formation, we screened PTH target genes in mouse osteoblast-like MC3T3-E1 cells. Here we show that Gprc5a, encoding an orphan G protein-coupled receptor, is a novel PTH-inducible gene and negatively regulates osteoblast proliferation and differentiation. PTH treatment induced Gprc5a expression in MC3T3-E1 cells, rat osteosarcoma ROS17/2.8 cells, and mouse femurs. Induction of Gprc5a expression by PTH occurred in the absence of protein synthesis and was mediated primarily via the cAMP pathway, suggesting that Gprc5a is a direct target of PTH signaling. Interestingly, Gprc5a expression was induced additively by co-treatment with PTH and 1α, 25-dihydroxyvitamin D3 (calcitriol), or retinoic acid in MC3T3-E1 cells. Reporter analysis of a 1 kb fragment of human GPRC5A promoter revealed that the promoter fragment showed responsiveness to PTH via the cAMP response element, suggesting that GPRC5A is also a PTH-inducible gene in humans. Gprc5a knockdown promoted cell viability and proliferation, as demonstrated by MTT and BrdU assays. Gprc5a knockdown also promoted osteoblast differentiation, as indicated by gene expression analysis and mineralization assay. Mechanistic studies showed that Gprc5a interacted with BMPR1A and suppressed BMP signaling induced by BMP-2 and constitutively active BMP receptors, ALK2 (ACVR1) Q207D and ALK3 (BMPR1A) Q233D. Thus, our results suggest that Gprc5a is a novel gene induced by PTH that acts in an inhibitory manner on both cell proliferation and osteoblast differentiation and is a candidate for drug targets for osteoporosis.

Structural characterization, photothermal effect and biological properties of La/Ga ion co-doped hydroxyapatite coated with polydopamine

Pure hydroxyapatite (HA) and La3+/Ga3+ co-doped HA were made using a straightforward hydrothermal method and later coated with the photothermal agent polydopamine (PDA). In addition to testing the HA of uncoated PDA in an alkaline environment (pH = 13), the influence of doping quantity and pH on the warming of solid/liquid samples was methodically examined and compared. The results show that among the same series of samples, 1La1GaHA13@PDA (pH = 13, doping amount of 1) has the optimal photothermal heating capacity. Enhancing the photothermal efficiency of the specimens is better achieved through co-doping, and the light absorption ability of the dopamine-modified samples is much stronger than that of the unmodified samples. It is estimated that the photothermal conversion efficiency of 1La1GaHA13@PDA is 67.68 %. E. Coli and S. aureus are used to test the photothermal sterilization performance of various samples. Light irradiation dramatically increases the antimicrobial rate of PDA-coated samples, with 1La1GaHA13@PDA being able to achieve more than 99 % against two types of bacteria. The cellular MTT assay showed that 1La1GaHA13@PDA was able to promote the proliferation of MC3T3-E1 osteoblasts at a low concentration of 50 ug/mL, with good biocompatibility.

Siwu decoction exerts a phytoestrogenic osteoprotective effect on postmenopausal osteoporosis via the estrogen receptor/phosphatidylinositol 3-kinase/serine/threonine protein kinase pathway

Ethnopharmacological relevanceSiwu decoction (SWD) is widely used in gynecological diseases, such as peripheral menopause syndrome, premature ovarian failure, and menstrual disorder. However, the mechanism of SWD on postmenopausal osteoporosis (PMOP) remains unclear. Aim of the studyTo discover the phytoestrogenic osteoprotective effect of SWD on PMOP. Materials and methodsThe potential mechanism of SWD on PMOP was filtered through network pharmacology research. The potential mechanism was verified in MC3T3-E1 cell lines in vitro. CCK8 assay was conducted to assess cell proliferation and the expressions of ER/PI3K/AKT pathway were analyzed using Western blot. Female F-344 rats were chosen to set up the PMOP model. The osteoprotective effect of SWD in vivo was evaluated using Hematoxylin-eosin staining, TRAP staining, Goldner staining and DXA. The potential mechanism was verified in vivo through Western blot and immunohistochemistry. RT-qPCR was conducted to unveil the expressions of osteogenesis genes. ResultsNetwork pharmacology research showed that ER/PI3K/AKT pathway may be the potential mechanism of SWD on PMOP. SWD promoted the proliferation of osteoblasts and regulated the protein expressions of ER/PI3K/AKT pathway in vitro. SWD improved the morphological structure, bone mineralization and bone mineral density of femurs and suppressed osteoclastogenesis in PMOP rat model via ER/PI3K/AKT pathway in vivo. In addition, SWD regulated the mRNA expressions of osteogenesis-related genes. ConclusionsSWD exerts a phytoestrogenic osteoprotective on PMOP by regulating ER/PI3K/AKT pathway, which marks it as a valuable medicine or supplement of PMOP.

Characterization of a spontaneous osteopetrosis model using RANKL-dysfunctional mice

Tumor necrosis factor superfamily member 11 (TNFSF11), or receptor activator of nuclear factor-κB ligand (RANKL), is a crucial osteoclast-stimulating factor binding to RANK on osteoclast membranes. Mouse models are powerful tools for understanding the genetic mechanisms of related diseases. Here, we examined the utility of Tnfsf11 mutation in mice for understanding the mechanisms of bone remodeling and dysmorphology. The Tnfsf11gum mouse, discovered in 2011 at Jackson Laboratory, was used to study the genetic landscape associated with TNFSF11 inactivation in bone marrow tissues. Tnfsf11gum/+ and Tnfsf11+/+ mice were subjected to Micro-CT observation, ELISA analysis, histological evaluation, and massively-parallel mRNA sequencing (RNA-Seq) analysis. Tnfsf11gum/+ mice exhibited severe osteopetrotic changes in the bone marrow cavity, along with significantly lower serum RANKL levels and a reduced number of tartrate-resistant acid phosphatase (TRAP)-positive osteoclasts in the bone marrow compared to those in Tnfsf11+/+ mice. However, tooth eruption between Tnfsf11gum/+ and Tnfsf11+/+ mice did not differ. Furthermore, genes involved in osteoblast proliferation and differentiation, including Gli1, Slc35b2, Lrrc17, and Junb were differentially expressed. Heterozygous mutation of TNFSF11 was also associated with a slightly increased expression of genes involved in osteoclast proliferation and differentiation, including Tcirg1, Junb, Anxa2, and Atp6ap1. Overall, we demonstrate that single gene mutations in Tnfsf11 cause bone resorption instability without significantly altering the genes related to osteoblast and osteoclast activity in the bone marrow cavity, thus establishing an optimal resource as an experimental animal model for bone resorption in bone biology research.

Mechanically robust and personalized silk fibroin-magnesium composite scaffolds with water-responsive shape-memory for irregular bone regeneration

The regeneration of critical-size bone defects, especially those with irregular shapes, remains a clinical challenge. Various biomaterials have been developed to enhance bone regeneration, but the limitations on the shape-adaptive capacity, the complexity of clinical operation, and the unsatisfied osteogenic bioactivity have greatly restricted their clinical application. In this work, we construct a mechanically robust, tailorable and water-responsive shape-memory silk fibroin/magnesium (SF/MgO) composite scaffold, which is able to quickly match irregular defects by simple trimming, thus leading to good interface integration. We demonstrate that the SF/MgO scaffold exhibits excellent mechanical stability and structure retention during the degradative process with the potential for supporting ability in defective areas. This scaffold further promotes the proliferation, adhesion and migration of osteoblasts and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. With suitable MgO content, the scaffold exhibits good histocompatibility, low foreign-body reactions (FBRs), significant ectopic mineralisation and angiogenesis. Skull defect experiments on male rats demonstrate that the cell-free SF/MgO scaffold markedly enhances bone regeneration of cranial defects. Taken together, the mechanically robust, personalised and bioactive scaffold with water-responsive shape-memory may be a promising biomaterial for clinical-size and irregular bone defect regeneration.

Effect of Lycium barbarum polysaccharide on osteoblast proliferation and differentiation in postmenopausal osteoporosis

ObjectiveWe aimed to investigate the effect of Lycium barbarum polysaccharide (LBP) on the proliferation and differentiation of osteoblasts in postmenopausal individuals with osteoporosis using in vitro cell experiments. MethodsWe assessed the effect of long-term LBP consumption on the intestinal metabolites of individuals using a simulation of the human intestinal microbiota ecosystem. We also tested the capacity of LBP in proliferating MC3T3-E1 cells using the cell counting kit-8 (CCK-8) method and analyzed the effect of intestinal metabolites on the osteogenic differentiation of MC3T3-E1 cells by testing bone metabolism viability with relevant indicators. ResultsThe level of short-chain fatty acids (SCFAs) significantly increased (p < 0.05), and the concentrations of acetic acid, propionic acid, and butyric acid all showed an upward trend after the treatment using LBP. At appropriate concentrations, the fermentation supernatant can enhance osteoblast proliferation by significantly increasing the active expression of bone-alkaline phosphatase (B-ALP) and osteocalcin (OCN) in osteoblasts (p < 0.05). ConclusionBy modulating the metabolites of intestinal microbiota, production of SCFAs, the prebiotic properties of LBP can enhance osteoblast differentiation through in vitro simulation experiment and cell-based assay.

Iron and bones: effects of iron overload, deficiency and anemia treatments on bone.

Iron is a vital trace element and exerts opposing effects on bone in both iron overload and iron deficiency situations. Remarkably, iron supplementation through intravenous infusion in patients with iron deficiency can also have detrimental effects on bone in special cases. The diverse mechanisms underlying these effects and their manifestations contribute to the complexity of this relationship. Iron overload impacts both bone resorption and formation, accelerating bone resorption while reducing bone formation. These effects primarily result from the direct action of reactive oxygen species (ROS), which influence the proliferation, differentiation, and activity of both osteoclasts and osteoblasts differently. This imbalance favors osteoclasts and inhibits the osteoblasts. Simultaneously, multiple pathways, including bone morphogenic proteins, RANK ligand, and others, contribute to these actions, leading to a reduction in bone mass and an increased susceptibility to fractures. In contrast, iron deficiency induces low bone turnover due to energy and co-factor deficiency, both of which require iron. Anemia increases the risk of fractures in both men and women. This effect occurs at various levels, reducing muscular performance and, on the bone-specific level, decreasing bone mineral density. Crucially, anemia increases the synthesis of the phosphaturic hormone iFGF23, which is subsequently inactivated by cleavage under physiological conditions. Thus, iFGF23 levels and phosphate excretion are not increased. However, in specific cases where anemia has to be managed with intravenous iron treatment, constituents-particularly maltoses-of the iron infusion suppress the cleavage of iFGF23. As a result, patients can experience severe phosphate wasting and, consequently, hypophosphatemic osteomalacia. This condition is often overlooked in clinical practice and is often caused by ferric carboxymaltose. Ending iron infusions or changing the agent, along with phosphate and vitamin D supplementation, can be effective in addressing this issue.