Proliferation Of Mesenchymal Stem Cells Research Articles

In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

Because nickel-titanium (NiTi) alloys have unique functions, such as superelasticity, shape memory, and hysteresis similar to bone in the loading-unloading cycles of their recoverable deformations. They likely offer good bone integration, a low loosening rate, individual customization, and ease of insertion. Due to the poor processability of NITI, traditional methods cannot manufacture NiTi products with complex shapes. Orthopedic NiTi implants need to show an adequate fracture elongation of at least 8%. Additive manufacturing can be used to prepare NiTi implants with complex structures and tunable porosity. However, as previously reported, additively manufactured NiTi alloys could only exhibit a maximum tensile fracture strain of 7%. In new reports, a selective laser melting (SLM)–NiTi alloy has shown greater tensile strain (15.6%). Nevertheless, due to the unique microstructure of additive manufacturing NiTi that differs from traditional NITI, the biocompatibility of SLM-NITI manufactured by this new process requires further evaluation In this study, the effects of the improved NiTi alloy on bone marrow mesenchymal stem cell (BMSC) proliferation, adhesion, and cell viability were investigated via in vitro studies. A commercial Ti-6Al-4V alloy was studied side-by-side for comparison. Like the Ti-6Al-4V alloy, the SLM-NiTi alloy exhibited low cytotoxicity toward BMSCs and similar effect on cell adhesion or cell viability. This study demonstrates that the new SLM-NiTi alloy, which has exhibited improved mechanical properties, also displays excellent biocompatibility. Therefore, this alloy may be a superior implant material in biomedical implantation.Graphical

The impact and mechanism study of Sijunzi decoction and Rg1 on proliferation and differentiation of human umbilical cord mesenchymal stem cells: An experimental study.

Previous researches have demonstrated that the traditional Chinese medicine could therapeutically treat inflammatory and hypoxic diseases by enhancing the functionality of mesenchymal stem cells. However, its mechanism was not yet clear. This research aimed to investigate the impact of the traditional Chinese medicine Sijunzi decoction and its herb monomer ginsenoside Rg1 on the proliferation and differentiation of human umbilical cord mesenchymal stem cells (hUC-MSCs) and explore the underlying mechanisms. Different concentrations of Sijunzi decoction and Rg1 were applied to differentiating induced hUC-MSCs. The CCK-8 test was utilized to evaluate cell proliferation activity and identify suitable drug concentrations. Alizarin Red staining was employed to detect the formation of calcium nodules, and Oil Red O staining was used to assess the formation of lipid droplets. PCR was utilized to examine gene expression related to osteogenic differentiation, adipogenic differentiation, and the HIF-1α signaling pathway in hUC-MSCs. Western blot analysis was conducted to evaluate protein expression in osteogenic differentiation and HIF-1α. ELISA was performed to measure HIF-1α signaling factors and inflammatory cytokine expression. Biochemical assays were used to assess changes in oxidative stress indicators. The Sijunzi decoction and Rg1 both demonstrated a dose-dependent promotion of hUC-MSC proliferation. The Sijunzi decoction significantly increased the expression of genes and proteins relevant to osteogenesis, such as osterix, osteocalcin, RUNX2, and osteopontin, and activated the HIF-1α pathway in hUC-MSCs. (P < .05). Similar effects were observed at the gene level after treatment with Rg1. Simultaneously, Sijunzi decoction significantly reduced the secretion of pro-inflammatory cytokines TNF-α, IL-6, and IL-1β, while increasing the secretion of the anti-inflammatory cytokine IL-10 during osteogenic differentiation (P < .05). Moreover, Sijunzi decoction lowered oxidative stress levels and enhanced the antioxidant capacity of hUC-MSCs during osteogenic differentiation (P < .05). However, the impact of Sijunzi decoction on hUC-MSCs toward adipogenic differentiation was not significant (P > .05). Sijunzi decoction promotes the proliferation and osteogenic differentiation of hUC-MSCs, potentially through the activation of the HIF-1α signaling pathway and by modulating the microenvironment via reducing inflammation and oxidative stress levels. Rg1 might be involved in this process.

Modified Titanium Implants Satisfy the Demands of Diabetic Osseointegration via Sequential Regulation of Macrophages and Mesenchymal Stem Cells.

The application of titanium (Ti) implants for patients with diabetes mellitus (DM) is still facing a significant challenge due to obstacles such as hyperglycemia, reactive oxygen species (ROS), and chronic inflammation, which hinders osseointegration. To address this issue, a Ti implant with dual functions of regulating polarization of macrophages and facilitating osseointergration is developed via hydrothermal reaction and hydrogel coating. The reactive oxygen species (ROS) and glucose (Glu) responsive hydrogel coating can locally deliver adenosine (ADO) in the early stage of implantation. The controlled release of ADO regulated the phenotype of macrophages, restored oxidative balance, and enhanced mitochondrial function during the early stages of implantation. Subsequently, strontium (Sr) ions will be released to promote osteogenic differentiation and proliferation of mesenchymal stem cells (MSCs), as the hydrogel coating degraded. It eventually leads to bone reconstruction during the late stages, aligning with the biological cascade of bone healing. The modified Ti implants showed effective osteogenesis for bone defects in DM patients, shedding light on the design and biological mechanisms of surface modification. This research offers promising potential for improving the treatment of bone-related complications in diabetic patients.

Combining three-dimensionality and CaP glass-PLA composites: Towards an efficient vascularization in bone tissue healing

Bone regeneration often fails due to implants/grafts lacking vascular supply, causing necrotic tissue and poor integration. Microsurgical techniques are used to overcome this issue, allowing the graft to anastomose. These techniques have limitations, including severe patient morbidity and current research focuses on stimulating angiogenesis in situ using growth factors, presenting limitations, such as a lack of control and increased costs. Non-biological stimuli are necessary to promote angiogenesis for successful bone constructs. Recent studies have reported that bioactive glass dissolution products, such as calcium-releasing nanoparticles, stimulate hMSCs to promote angiogenesis and new vasculature. Moreover, the effect of 3D microporosity has also been reported to be important for vascularisation in vivo. Therefore, we used room-temperature extrusion 3D printing with polylactic acid (PLA) and calcium phosphate (CaP) based glass scaffolds, focusing on geometry and solvent displacement for scaffold recovery. Combining both methods enabled reproducible control of 3D structure, porosity, and surface topography. Scaffolds maintained calcium ion release at physiological levels and supported human mesenchymal stem cell proliferation. Scaffolds stimulated the secretion of vascular endothelial growth factor (VEGF) after 3 days of culture. Subcutaneous implantation in vivo indicated good scaffold integration and blood vessel infiltration as early as one week after. PLA-CaP scaffolds showed increased vessel maturation 4 weeks after implantation without vascular regression. Results show PLA/CaP-based glass scaffolds, made via controlled 3D printing, support angiogenesis and vessel maturation, promising improved vascularization for bone regeneration.

Enhancement the antioxidative and immunomodulatory functions of mesenchymal stem cells by tetrandrine

In this study, mesenchymal stem cells (MSCs) were primed with Tetrandrine (TET) having anti-inflammatory and immunomodulatory effects to examine the effects of this molecule on the antioxidative potential of MSCs as well as their modulatory effects on activated peripheral blood mononuclear cells (PBMCs). The viability of primed MSCs was detected using MTT assay and Trypan blue staining. Moreover, flow cytometry technique was applied to evaluate cell cycle distribution and immunophenotype of MSCs. The production of superoxide dismutase 3 (SOD3), malondialdehyde (MDA), kynurenine, TGF-β, and IFN-γ were also measured by spectrophotometry to assess the alteration of antioxidative and immunomodulatory potential of MSCs. Then, TET-primed MSCs were cocultured with PBMCs. The MTT assay was used to measure the proliferation of PBMCs. Cell cycle progression of PBMCs and frequency of regulatory T cells were evaluated using Flow cytometry. ELISA assay was also applied to determine the concentrations of TGF-β and IFN-γ after coculturing. According to our data, TET enhanced the secretion of SOD3 and kynurenine from MSCs, while the production of IFN-γ was reduced. No changes were observed in the viability, proliferation, and immunophenotype of MSCs after priming with TET. Moreover, the proliferation and frequency of PBMCs in the S and G2/M phases of cell cycle reduced after co-culturing with TET-primed MSCs. The concentration of TGF-β was increased in the supernatant of PBMCs, but the level of IFN-γ was reduced.Our data suggested this priming method as a novel strategy for increasing the antioxidative and immunomodulatory activity of MSCs.

The ability of SPEEK to promote the proliferation and osteogenic differentiation of BMSCs on PEEK surfaces

To investigate the ability of sulfonated polyetheretherketone (SPEEK) to promote the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and compare the effects of different degrees of sulfonation (DS), SPEEK was made with two different DS. The L-SPEEK group had a lower DS, while the H-SPEEK group had a higher DS. The physicochemical properties of both species were evaluated by scanning electron microscopy (SEM), capitilize Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Then, proliferation and osteogenic differentiation between the two groups and with pure polyetheretherketone (PEEK) were compared after surface inoculation of bone marrow mesenchymal stem cells (BMSCs). Scanning electron microscopy (SEM) revealed that the surface of the PEEK substrates could be smooth or coarse, and the degree of roughness increased with increasing sulfonation. FTIR spectroscopy showed that both the L-SPEEK and H-SPEEK samples contained sulfonic acid. TGA and XRD revealed that the components in the two groups were the same, but the intensities were different. After BMSC inoculation, a CCK8 assay revealed that the cells proliferated more on the H-SPEEK surface and little on the L-SPEEK surface compared with the PEEK surface. Then, osteogenic differentiation was verified by immunofluorescence staining for OCN and Runx2, which indicated that H-SPEEK had the greatest effect on improving differentiation. The results of alizarin red staining (ARS) and alkaline phosphatase staining (APS) also revealed this trend. Sulfonation can change the microsurface of PEEK, which can improve both BMSC proliferation and osteogenic differentiation.

Dexamethasone Long-Term Controlled Release from Injectable Dual-Network Hydrogels with Porous Microspheres Immunomodulation Promotes Bone Regeneration.

Long-lasting, controlled-release, and minimally invasive injectable platforms that provide a stable blood concentration to promote bone regeneration are less well developed. Using hexagonal mesoporous silica (HMS) loaded with dexamethasone (DEX) and poly(lactic-co-glycolic acid) (PLGA), we prepared porous DEX/HMS/PLGA microspheres (PDHP). In contrast to HMS/PLGA microspheres (HP), porous HMS/PLGA microspheres (PHP), DEX/PLGA microspheres (DP), and DEX/HMS/PLGA microspheres (DHP), PDHP showed notable immuno-coordinated osteogenic capabilities and were best at promoting bone mesenchymal stem cell proliferation and osteogenic differentiation. PDHP were combined with methacrylated silk (SilMA) and sodium alginate (SA) to form an injectable photocurable dual-network hydrogel platform that could continuously release the drug for more than 4 months. By adjusting the content of the microspheres in the hydrogel, a zero-order release hydrogel platform was obtained in vitro for 48 days. When the microsphere content was 1%, the hydrogel platform exhibited the best biocompatibility and osteogenic effects. The expression levels of the osteogenic gene alkaline phosphatases, BMP-2 and OPN were 10 to 15 times higher in the 1% group than in the 0% group, respectively. In addition, the 1% microsphere hydrogel strongly stimulated macrophage polarization to the M2 phenotype, establishing an immunological milieu that supports bone regrowth. The aforementioned outcomes were also observed in vivo. The most successful method for correcting cranial bone abnormalities in SD rats was to use a hydrogel called SilMA/SA containing 1% drug-loaded porous microspheres (PDHP/SS). The angiogenic and osteogenic effects of this treatment were also noticeably greater in the PDHP/SS group than in the control and blank groups. In addition, PDHP/SS polarized M2 macrophages and suppressed M1 macrophages in vivo, which reduced the local immune-inflammatory response, promoted angiogenesis, and cooperatively aided in situ bone healing. This work highlights the potential application of an advanced hydrogel platform for long-term, on-demand, controlled release for bone tissue engineering.

Mesenchymal Stem Cell and Hematopoietic Stem and Progenitor Cell Co-Culture in a Bone-Marrow-on-a-Chip Device toward the Generation and Maintenance of the Hematopoietic Niche.

Bone marrow has raised a great deal of scientific interest, since it is responsible for the vital process of hematopoiesis and is affiliated with many normal and pathological conditions of the human body. In recent years, organs-on-chips (OoCs) have emerged as the epitome of biomimetic systems, combining the advantages of microfluidic technology with cellular biology to surpass conventional 2D/3D cell culture techniques and animal testing. Bone-marrow-on-a-chip (BMoC) devices are usually focused only on the maintenance of the hematopoietic niche; otherwise, they incorporate at least three types of cells for on-chip generation. We, thereby, introduce a BMoC device that aspires to the purely in vitro generation and maintenance of the hematopoietic niche, using solely mesenchymal stem cells (MSCs) and hematopoietic stem and progenitor cells (HSPCs), and relying on the spontaneous formation of the niche without the inclusion of gels or scaffolds. The fabrication process of this poly(dimethylsiloxane) (PDMS)-based device, based on replica molding, is presented, and two membranes, a perforated, in-house-fabricated PDMS membrane and a commercial poly(ethylene terephthalate) (PET) one, were tested and their performances were compared. The device was submerged in a culture dish filled with medium for passive perfusion via diffusion in order to prevent on-chip bubble accumulation. The passively perfused BMoC device, having incorporated a commercial poly(ethylene terephthalate) (PET) membrane, allows for a sustainable MSC and HSPC co-culture and proliferation for three days, a promising indication for the future creation of a hematopoietic bone marrow organoid.

Additive manufacturing of bioactive and biodegradable poly (lactic acid)-tricalcium phosphate scaffolds modified with zinc oxide for guided bone tissue repair

Bioactive and biodegradable scaffolds that mimic the natural extracellular matrix of bone serve as temporary structures to guide new bone tissue growth. In this study, 3D-printed scaffolds composed of poly (lactic acid) (PLA)-tricalcium phosphate (TCP) (90-10 wt.%) were modified with 1%, 5%, and 10 wt.% of ZnO to enhance bone tissue regeneration. A commercial chain extender named Joncryl was incorporated alongside ZnO to ensure the printability of the composites. Filaments were manufactured using a twin-screw extruder and subsequently used to print 3D scaffolds via fused filament fabrication (FFF). The scaffolds exhibited a homogeneous distribution of ZnO and TCP particles, a reproducible structure with 300 μm pores, and mechanical properties suitable for bone tissue engineering, with an elastic modulus around 100 MPa. The addition of ZnO resulted in enhanced surface roughness on the scaffolds, particularly for ZnO microparticles, achieving values up to 241 nm. This rougher topography was responsible for enhancing protein adsorption on the scaffolds, with an increase of up to 85% compared to the PLA-TCP matrix. Biological analyses demonstrated that the presence of ZnO promotes mesenchymal stem cell (MSC) proliferation and differentiation into osteoblasts. Alkaline phosphatase (ALP) activity, an important indicator of early osteogenic differentiation, increased up to 29%. The PLA-TCP composite containing 5% ZnO microparticles exhibited an optimized degradation rate and enhanced bioactivity, indicating its promising potential for bone repair applications.

Rapid prototyping of perfusion cell culture devices for three-dimensional imaging of mesenchymal stem cell deposition and proliferation

Perfusion of porous scaffolds transports cells to the surface to yield cellular constructs for 3D models of disease and for tissue engineering applications. While ceramic scaffolds mimic the structure and composition of trabecular bone, their opacity and tortuous pores limit the penetration of light into the interior. Scaffolds that are both perfusable and amenable to fluorescence microscopy are therefore needed to visualize the spatiotemporal dynamics of cells in the bone microenvironment. In this study, a hybrid injection molding approach was designed to enable rapid prototyping of collector arrays with variable configurations that are amenable to longitudinal imaging of attached human mesenchymal stem cells (hMSCs) using fluorescence microscopy. Cylindrical collectors were arranged in an array that is permeable to perfusion in the xy-plane and to light in the z-direction for imaging from below. The effects of the collector radius, number, and spacing on the collection efficiency of perfused hMSCs was simulated using computational fluid dynamics (CFD) and measured experimentally using fluorescence microscopy. The effect of collector diameter on simulated and experimental cell collection efficiencies followed a trend similar to that predicted by interception theory corrected for intermolecular and hydrodynamic forces for the arrays with constant collector spacing. In contrast, arrays designed with constant collector number yielded collection efficiencies that poorly fit the trend with collector radius predicted by interception theory. CFD simulations of collection efficiency agreed with experimental measurements within a factor of two. These findings highlight the utility of CFD simulations and hybrid injection molding for rapid prototyping of collector arrays to optimize the longitudinal imaging of cells without the need for expensive and time-consuming tooling.

Donor Sex and Passage Conditions Influence MSC Osteogenic Response in Mineralized Collagen Scaffolds.

Contemporary tissue engineering efforts often seek to use mesenchymal stem cells (MSCs) due to their multi-potent potential and ability to generate a pro-regenerative secretome. While many have reported the influence of matrix environment on MSC osteogenic response, few have investigated the effects of donor and sex. Here, a well-defined mineralized collagen scaffold is used to study the influence of passage number and donor-reported sex on MSC proliferation and osteogenic potential. A library of bone marrow and adipose tissue-derived stem cells from eight donors to examine donor viability in osteogenic capacity in mineralized collagen scaffolds is obtained. MSCs displayed reduced proliferative capacity as a function of passage duration. Further, MSCs showed significant sex-associated variability in osteogenic capacity. Notably, MSCs from male donors displayed significantly higher cell proliferation while MSCs from female donors displayed significantly higher osteogenic response via increased alkaline phosphate activity, osteoprotegerin release, and mineral formation in vitro. The study highlights the essentiality of including donor-reported sex as an experimental variable and reporting culture expansion in future studies of biomaterial regenerative potential.

Primary human mesenchymal stem cell culture under xeno-free conditions using surface-modified cellulose nanofiber scaffolds

Stem cell culture often requires various animal-derived components such as serum and collagen. This limits its practical use. Therefore, xeno-free (xenogeneic component-free) culture systems are receiving increased attention. Herein, we propose xeno-free, plant-derived cellulose nanofibers (CNFs) with different surface chemistry: 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized CNFs (TOCNFs) with carboxy groups and surface-sulfated CNFs (S-CNFs) for the proliferation of human mesenchymal stem cells (hMSCs) under various serum conditions. We cultured bone marrow-derived hMSCs on CNF scaffolds with various fiber lengths and functional group contents. Original CNFs were bioinert materials that did not contribute to cell adhesion. In contrast, the surface-modified CNFs facilitated the proliferation of immortalized hMSCs under normal and low-serum conditions. The TOCNFs (COONa: 1.47 mmol g−1; length: 0.53 μm), the S-CNFs (OSO3Na: 0.64 mmol g−1; 0.61 μm), and a combination of the two (1:1 by weight) enabled immortalized hMSCs to maintain their multipotency, even under serum-free conditions. Primary cultured hMSCs proliferated well on the TOCNF/S-CNF scaffolds in a completely serum-free medium, comparable to animal-derived type I collagen, although few hMSCs adhered to the standard polystyrene substrate. Our strategy of using surface-modified CNFs will inform the development of xeno-free culture systems to avoid the use of animal-derived materials for both cell culture media and scaffolds.

Enhancing osteoporosis treatment using a targeted, sustained-release drug delivery system based on macrocyclic amphiphile

Osteoporosis, a prevalent systemic bone metabolic disorder, primarily affects postmenopausal women and is characterized by increased bone fragility and a heightened risk of fractures. The efficacy of current osteoporosis treatments is often limited by non-specific drug targeting and undesirable off-target skeletal side effects. To address this challenge, we have developed a novel hydroxyapatite-responsive drug delivery system. This system utilizes a self-assembled p-phosphonatocalix[4]arene tetradodecyl ether (PC4A12C), engineered to specifically target and sustain the release of osteoporosis medication at sites of bone remodeling. Our focus centers on icariin (ICA), a drug known for its potent osteogenic properties and minimal adverse effects. In vitro, ICA-loaded PC4A12C (ICA@PC4A12C) demonstrated enhanced proliferation, differentiation, and mineralization in bone marrow mesenchymal stem cells (BMSCs). In vivo, ICA@PC4A12C exhibited superior efficacy in specifically targeting bone tissue, ensuring a controlled and slow release of icariin directly within the bone environment. In an osteoporosis mouse model, treatment with ICA@PC4A12C showed notable enhancement in osteogenic activity and a significant increase in bone density compared to ICA alone. These results demonstrate the potential of PC4A12C as an effective drug carrier in the development of advanced antiosteoporotic drug delivery systems.

The Effect of Exercise on Mesenchymal Stem Cells and their Application in Obesity Treatment.

Mesenchymal stem cells (MSCs) have demonstrated considerable potential in tissue repair and the treatment of immune-related diseases, but there are problems with homing efficiency during MSCs transplantation. Exercise, as an intervention, has been shown to have an important impact on the properties of MSCs. This review summarizes the effects of exercise on the properties (including proliferation, apoptosis, differentiation, and homing) of bone marrow-derived MSCs and adipose-derived MSCs. Studies indicated that exercise enhances bone marrow-derived MSCs proliferation, osteogenic differentiation, and homing while reducing adipogenic differentiation. For adipose-derived MSCs, exercise enhances proliferation and reduces adipogenic differentiation. In addition, studies have investigated the therapeutic effects of combined therapy of MSCs transplantation with exercise on diseases of the bone, cardiac, and nervous systems. The combined therapy improves tissue repair by increasing the homing of transplanted MSCs and cytokine secretion (such as neurotrophin 4). Furthermore, MSCs transplantation also has potential for the treatment of obesity. Although the effect is not significant in weight loss, MSCs transplantation shows effects in controlling blood glucose, improving dyslipidemia, reducing inflammation, and improving liver disease. Finally, the potential role of combined MSCs transplantation and exercise therapy in addressing obesity is discussed.

Structurally and mechanically tuned macroporous hydrogels for scalable mesenchymal stem cell–extracellular matrix spheroid production

Mesenchymal stem cells (MSCs) are essential in regenerative medicine. However, conventional expansion and harvesting methods often fail to maintain the essential extracellular matrix (ECM) components, which are crucial for their functionality and efficacy in therapeutic applications. Here, we introduce a bone marrow-inspired macroporous hydrogel designed for the large-scale production of MSC-ECM spheroids. Through a soft-templating approach leveraging liquid-liquid phase separation, we engineer macroporous hydrogels with customizable features, including pore size, stiffness, bioactive ligand distribution, and enzyme-responsive degradability. These tailored environments are conducive to optimal MSC proliferation and ease of harvesting. We find that soft hydrogels enhance mechanotransduction in MSCs, establishing a standard for hydrogel-based 3D cell culture. Within these hydrogels, MSCs exist as both cohesive spheroids, preserving their innate vitality, and as migrating entities that actively secrete functional ECM proteins. Additionally, we also introduce a gentle, enzymatic harvesting method that breaks down the hydrogels, allowing MSCs and secreted ECM to naturally form MSC-ECM spheroids. These spheroids display heightened stemness and differentiation capacity, mirroring the benefits of a native ECM milieu. Our research underscores the significance of sophisticated materials design in nurturing distinct MSC subpopulations, facilitating the generation of MSC-ECM spheroids with enhanced therapeutic potential.

High concentration of nitric oxide impaired proliferation of bone marrow mesenchymal stem cells due to cell cycle arrest at G1 stage

High concentration of nitric oxide impaired proliferation of bone marrow mesenchymal stem cells due to cell cycle arrest at G1 stage

Engineered extracellular vesicle-delivered TGF-β inhibitor for attenuating osteoarthritis by targeting subchondral bone

Osteoarthritis (OA) is a disease that affects the entire joint. To treat OA, it may be beneficial to inhibit the activity of TGF-β in the subchondral bone. However, delivering drugs to the subchondral bone using conventional methods is challenging. In this study, we developed an extracellular vesicle delivery system. The utilization of macrophage-derived extracellular vesicles as a drug-carrying platform enables drugs to evade immune clearance and cross biological barriers. By incorporating targeting peptides on the surface of extracellular vesicles, the drug platform becomes targeted. The combination of these two factors results in the successful delivery of the drug to the subchondral bone. The study evaluated the stability, cytotoxicity, and bone targeting capability of the engineered extracellular vesicle platform (BT-EV-G). It also assessed the effects of BT-EV-G on the differentiation, proliferation, and migration of bone mesenchymal stem cells (BMSCs). Additionally, the researchers administered BT-EV-G to anterior cruciate ligament transection (ACLT)-induced OA mice. The results showed that BT-EV-G had low toxicity and high bone targeting ability both in vitro and in vivo. BT-EV-G can restore coupled bone remodeling in subchondral bone by inhibiting pSmad2/3-dependent TGF-β signaling. This work provides new insights into the treatment of OA.

Injectable porous microspheres for articular cartilage regeneration through in situ stem cell recruitment and macrophage polarization

In situ mesenchymal stem cells (MSCs) regenerative therapy holds promising potential for treating osteoarthritis. However, MSCs engraftment and intra-articular inflammation limit the therapeutic efficacy of this approach. This study introduces porous microspheres (PMs) composed of aldehyde-modified poly(lactic-co-glycolic acid), that encapsulate platelet derived growth factor-AB and kartogenin. Metformin (Met) is also incorporated onto the microsphere through a Schiff base reaction to create PMs@Met. In vitro, in vivo and ex experiments revealed that PMs@Met can be injected into the joint cavity, effectively recruiting endogenous MSCs in situ. This approach creates a favorable environment for MSCs proliferation. It also controls the intra-articular inflammatory environment by modulating the polarization of synovial macrophages, ultimately promoting cartilage repair. In summary, our study presents an innovative tissue engineering strategy for the treatment of osteoarthritis-induced articular cartilage injuries. Statement of significanceCell therapy using autologous mesenchymal stem cells (MSCs) has potential to slow the progression of osteoarthritis (OA). Nonetheless, there are some disadvantages to adopting in situ MSCs therapy, including difficulties with MSC engraftment into cartilage-deficient regions, the effect of intra-articular inflammation on MSC therapeutic efficacy, and attaining selective chondrogenic MSC differentiation. We created injectable PLGA microspheres (PMs) that were loaded with PDGF-AB and KGN. Metformin was bonded to the surface of microspheres using a Schiff base reaction. The microspheres can recruit intra-articular MSCs and encourage their development into chondrocytes. The microspheres actively modulate the inflammatory joint environment by altering synovial macrophage polarization, thereby supporting MSCs in effective cartilage treatment. To summarize, microspheres hold great potential in the treatment of OA.

A Novel Piezo1 Agonist Promoting Mesenchymal Stem Cell Proliferation and Osteogenesis to Attenuate Disuse Osteoporosis

Disuse osteoporosis (OP) is a state of bone loss due to lack of mechanical stimuli, probably induced by prolonged bed rest, neurological diseases, as well as microgravity. Currently the precise treatment strategies of disuse OP remain largely unexplored. Piezo1, a mechanosensitive calcium (Ca2+) ion channel, is a key force sensor mediating mechanotransduction and it is demonstrated to regulate bone homeostasis and osteogenesis in response to mechanical forces. Using structure‐based drug design, a novel small‐molecule Piezo1 agonist, MCB‐22‐174, which can effectively activate Piezo1 and initiate Ca2+ influx, is developed and is more potent than the canonical Piezo1 agonist, Yoda1. Moreover, MCB‐22‐174 is found as a safe Piezo1 agonist without any signs of serious toxicity. Mechanistically, Piezo1 activation promotes the proliferation of bone marrow mesenchymal stem cells by activating the Ca2+‐related extracellular signal‐related kinases and calcium–calmodulin (CaM)‐dependent protein kinase II (CaMKII) pathway. Importantly, MCB‐22‐174 could effectively promote osteogenesis and attenuate disuse OP in vivo. Overall, the findings provide a promising therapeutic strategy for disuse OP by chemical activation of Piezo1.

A comparative evaluation of the effects of 635 nm laser on cell proliferation and osteogenic differentiation of buccal fat pad mesenchymal stem cells

A comparative evaluation of the effects of 635 nm laser on cell proliferation and osteogenic differentiation of buccal fat pad mesenchymal stem cells