Profiles Of Horizontal Wind Speed Research Articles

A novel empirical model for vertical profiles of downburst horizontal wind speed

AbstractThis study proposes an empirical model for preliminary wind‐resist design of downburst flow. Existing empirical models were compared with field data and found to underpredict horizontal wind speed below the height corresponding to the maximum radial velocity, due to the neglect of viscous effects and the evolution of vertical wind profiles along radial direction. To address these deficiencies, semi‐empirical piecewise functions including wall shear effects in the local turbulent boundary layer and interpolation functions were proposed to improve the accuracy of existing models. The wind profile based on Coles' theory was found to agree well with field data, with the parabola interpolation function being the most desirable. Using the proposed method, the vertical profile of horizontal wind speed at different local radial locations can be predicted for wind resist design given the inlet wind speed of the downburst flow. Overall, this model improves upon existing empirical models and allows for more accurate wind‐resist design.

Airborne lidar observations of wind, water vapor, and aerosol profiles during the NASA Aeolus calibration and validation (Cal/Val) test flight campaign

Abstract. Lidars are uniquely capable of collecting high-precision and high spatiotemporal resolution observations that have been used for atmospheric process studies from the ground, aircraft, and space for many years. The Aeolus mission, the first space-borne Doppler wind lidar, was developed by the European Space Agency (ESA) and launched in August 2018. Its novel Atmospheric LAser Doppler INstrument (ALADIN) observes profiles of the component of the wind vector and aerosol/cloud optical properties along the instrument's line-of-sight (LOS) direction on a global scale. A total of two airborne lidar systems have been developed at NASA Langley Research Center in recent years that collect measurements in support of several NASA Earth Science Division focus areas. The coherent Doppler Aerosol WiNd (DAWN) lidar measures vertical profiles of LOS velocity along selected azimuth angles that are combined to derive profiles of horizontal wind speed and direction. The High Altitude Lidar Observatory (HALO) measures high resolution profiles of atmospheric water vapor (WV) and aerosol and cloud optical properties. Because there are limitations in terms of spatial and vertical detail and measurement precision that can be accomplished from space, airborne remote sensing observations like those from DAWN and HALO are required to fill these observational gaps and to calibrate and validate space-borne measurements. Over a 2-week period in April 2019, during their Aeolus Cal/Val Test Flight campaign, NASA conducted five research flights over the eastern Pacific Ocean with the DC-8 aircraft. The purpose was to demonstrate the following: (1) DAWN and HALO measurement capabilities across a range of atmospheric conditions, (2) Aeolus Cal/Val flight strategies and comparisons of DAWN and HALO measurements with Aeolus, to gain an initial perspective of Aeolus performance, and (3) ways in which atmospheric dynamic processes can be resolved and better understood through simultaneous observations of wind, WV, and aerosol profile observations, coupled with numerical model and other remote sensing observations. This paper provides a brief description of the DAWN and HALO instruments, discusses the synergistic observations collected across a wide range of atmospheric conditions sampled during the DC-8 flights, and gives a brief summary of the validation of DAWN, HALO, and Aeolus observations and comparisons.

Development of a 3D Real-Time Atmospheric Monitoring System (3DREAMS) Using Doppler LiDARs and Applications for Long-Term Analysis and Hot-and-Polluted Episodes

Heatwaves and air pollution are serious environmental problems that adversely affect human health. While related studies have typically employed ground-level data, the long-term and episodic characteristics of meteorology and air quality at higher altitudes have yet to be fully understood. This study developed a 3-Dimensional Real-timE Atmospheric Monitoring System (3DREAMS) to measure and analyze the vertical profiles of horizontal wind speed and direction, vertical wind velocity as well as aerosol backscatter. The system was applied to Hong Kong, a highly dense city with complex topography, during each season and including hot-and-polluted episodes (HPEs) in 2019. The results reveal that the high spatial wind variability and wind characteristics in the lower atmosphere in Hong Kong can extend upwards by up to 0.66 km, thus highlighting the importance of mountains for the wind environment in the city. Both upslope and downslope winds were observed at one site, whereas downward air motions predominated at another site. The high temperature and high concentration of fine particulate matter during HPEs were caused by a significant reduction in both horizontal and vertical wind speeds that established conditions favorable for heat and air pollutant accumulation, and by the prevailing westerly wind promoting transboundary air pollution. The findings of this study are anticipated to provide valuable insight for weather forecasting and air quality studies. The 3DREAMS will be further developed to monitor upper atmosphere wind and air quality over the Greater Bay Area of China.

Wind Measurements from Arc Scans with Doppler Wind Lidar

AbstractDefining optimal scanning geometries for scanning lidars for wind energy applications remains an active field of research. This paper evaluates uncertainties associated with arc scan geometries and presents recommendations regarding optimal configurations in the atmospheric boundary layer. The analysis is based on arc scan data from a Doppler wind lidar with one elevation angle and seven azimuth angles spanning 30° and focuses on an estimation of 10-min mean wind speed and direction. When flow is horizontally uniform, this approach can provide accurate wind measurements required for wind resource assessments in part because of its high resampling rate. Retrieved wind velocities at a single range gate exhibit good correlation to data from a sonic anemometer on a nearby meteorological tower, and vertical profiles of horizontal wind speed, though derived from range gates located on a conical surface, match those measured by mast-mounted cup anemometers. Uncertainties in the retrieved wind velocity are related to high turbulent wind fluctuation and an inhomogeneous horizontal wind field. The radial velocity variance is found to be a robust measure of the uncertainty of the retrieved wind speed because of its relationship to turbulence properties. It is further shown that the standard error of wind speed estimates can be minimized by increasing the azimuthal range beyond 30° and using five to seven azimuth angles.

Coupled carbon-water exchange of the Amazon rain forest, I. Model description, parameterization and sensitivity analysis

Abstract. Detailed one-dimensional multilayer biosphere-atmosphere models, also referred to as CANVEG models, are used for more than a decade to describe coupled water-carbon exchange between the terrestrial vegetation and the lower atmosphere. Within the present study, a modified CANVEG scheme is described. A generic parameterization and characterization of biophysical properties of Amazon rain forest canopies is inferred using available field measurements of canopy structure, in-canopy profiles of horizontal wind speed and radiation, canopy albedo, soil heat flux and soil respiration, photosynthetic capacity and leaf nitrogen as well as leaf level enclosure measurements made on sunlit and shaded branches of several Amazonian tree species during the wet and dry season. The sensitivity of calculated canopy energy and CO2 fluxes to the uncertainty of individual parameter values is assessed. In the companion paper, the predicted seasonal exchange of energy, CO2, ozone and isoprene is compared to observations. A bi-modal distribution of leaf area density with a total leaf area index of 6 is inferred from several observations in Amazonia. Predicted light attenuation within the canopy agrees reasonably well with observations made at different field sites. A comparison of predicted and observed canopy albedo shows a high model sensitivity to the leaf optical parameters for near-infrared short-wave radiation (NIR). The predictions agree much better with observations when the leaf reflectance and transmission coefficients for NIR are reduced by 25–40%. Available vertical distributions of photosynthetic capacity and leaf nitrogen concentration suggest a low but significant light acclimation of the rain forest canopy that scales nearly linearly with accumulated leaf area. Evaluation of the biochemical leaf model, using the enclosure measurements, showed that recommended parameter values describing the photosynthetic light response, have to be optimized. Otherwise, predicted net assimilation is overestimated by 30–50%. Two stomatal models have been tested, which apply a well established semi-empirical relationship between stomatal conductance and net assimilation. Both models differ in the way they describe the influence of humidity on stomatal response. However, they show a very similar performance within the range of observed environmental conditions. The agreement between predicted and observed stomatal conductance rates is reasonable. In general, the leaf level data suggests seasonal physiological changes, which can be reproduced reasonably well by assuming increased stomatal conductance rates during the wet season, and decreased assimilation rates during the dry season. The sensitivity of the predicted canopy fluxes of energy and CO2 to the parameterization of canopy structure, the leaf optical parameters, and the scaling of photosynthetic parameters is relatively low (1–12%), with respect to parameter uncertainty. In contrast, modifying leaf model parameters within their uncertainty range results in much larger changes of the predicted canopy net fluxes (5–35%).

Variation de la vitesse du vent a l'interieur et au-dessus d'une vigne

Horizontal wind speed profiles above and within rows of vineyard can be represented by a one-dimensional model in a limited zone within the boundary layer and they can be expressed with the attenuation coefficient of Cionco and zero-plane displacement. The two zones with different roughness lengths are not observed. Wind direction effects are especially evident inside the canopy and the data indicate that the usual flux profile relationships are not valid for mass and heat fluxes.

Snow Transport Over Mountain Crests

AbstractIn order to gain more insight into the mountain snow-transport mechanisms wind and drift flux measurements have been executed on a ridge crest (mainly during snow-storms). Horizontal wind-speed profiles, measured between 0.3 and 6 m above snow surface, show a hump-shaped course especially for strong winds. Theoretical approximations substantiate that the Bernoullian pressure decrease on the crest may be the main cause for this type of wind profile. Roughness parameters (Z0, u⋆) are determined with the aid of the wind profiles and compared with those reported in the literature. Corresponding drift density profiles coincide with steady-state drift theories as long as wind speeds are low (u1≤ 7-10 m s-1), at greater wind speeds snow plumes of 1 to 1.5 m thickness develop immediately above snow surface. Areal measurements on snow mass-balance differences between windward and lee slopes are used to approximate the total transport over the ridge crest and to derive a quantitative relationship between crest winds and drift-snow deposition on lee slopes.

Snow Transport Over Mountain Crests

AbstractIn order to gain more insight into the mountain snow-transport mechanisms wind and drift flux measurements have been executed on a ridge crest (mainly during snow-storms). Horizontal wind-speed profiles, measured between 0.3 and 6 m above snow surface, show a hump-shaped course especially for strong winds. Theoretical approximations substantiate that the Bernoullian pressure decrease on the crest may be the main cause for this type of wind profile. Roughness parameters (Z0, u⋆) are determined with the aid of the wind profiles and compared with those reported in the literature. Corresponding drift density profiles coincide with steady-state drift theories as long as wind speeds are low (u1≤ 7-10 m s-1), at greater wind speeds snow plumes of 1 to 1.5 m thickness develop immediately above snow surface. Areal measurements on snow mass-balance differences between windward and lee slopes are used to approximate the total transport over the ridge crest and to derive a quantitative relationship between crest winds and drift-snow deposition on lee slopes.

Turbulence and Wind Speed Spectra within a Japanese Larch Plantation

Abstract Mean horizontal wind speed profiles within and above a plantation of Japanese larch were obtained. A log-profile analysis of above-vegetation wind speeds yielded a wide range of values for the roughness length parameter z0 and the zero-plane displacement height D. The computed Eulerian space scale of turbulence within the vegetation showed deeper penetration of large eddies after needle fall and during high winds. Power spectra showed that at the base of the plantation most of the variation in wind speed was associated with gusts of about 100 m wavelength. Power spectra at the most dense portion of the plantation canopy showed considerable modification due to the tree spacing.