Evolution Of Profile Research Articles

Task Classification Framework and Job-Task Analysis Method for Understanding the Impact of Smart and Digital Technologies on the Operators 4.0 Job Profiles

There is limited scientific and grey literature studying the phenomenon of how the current job profiles are being affected by Industry 4.0 technologies at the operational level. This paper aims to answer the following question: how can the evolution of Workforce 4.0 job profiles be analyzed from a job-task perspective concerning the adoption of smart and digital technologies in manufacturing companies? To this end, it presents a task classification framework addressing three task classification dimensions, namely: (i) routine/nonroutine tasks, (ii) physical/cognitive tasks, and (iii) individual/social tasks, and a job-task analysis method to analyze the evolution of job profiles due to smart or digital technology adoption at the task level. Both artifacts were created using a state-of-the-art review to ground their conceptualization in the most recent knowledge available on work design and job-task analysis methods and were later evaluated and refined using an action-research approach to increase their applicability and usefulness for academic researchers and practitioners. The applicability of the proposed framework and method was demonstrated in an industrial case study discussing the theoretical and managerial contributions of these two artifacts for the development of Workforce 4.0 job profiles. It was concluded that the proposed framework and method are valuable artifacts that contribute to the limited universe of tools available in the literature to first analyze how operators’ tasks and roles change concerning the adoption of new Industry 4.0 technologies and then identify the requirements of new skills and competencies for the evolving and emerging job profiles on the shop floor.

The new sea ice thermodynamics code for the INM RAS Earth System model: The design and comparison of one- and zero-dimensional approaches with the observational data

Abstract This work is devoted to the comparison of one- (1-D) and zero-dimensional (0-D) models of sea ice thermodynamics. 1-D thermodynamics solvers imply the solution of the diffusion equation with penetrating radiation in the moving domain (moving boundary problem), while 0-D implementations neglect the heat capacity of ice and penetrating radiation, that leads to a linear temperature profile by the construction. So far, some climate models use 0-D implementation of thermodynamics in a block of sea ice, while other models use 1-D implementation with a small number of nodes. In this work we present our fully implicit 0-D and 1-D version of snow–ice thermodynamics, which relieves the model of Courant-type time step constraints. Implicitness is achieved by the relaxation method for nonlinear heat capacity and thermal conductivity coefficients with simultaneous search for the temperature that satisfies the boundary conditions. We introduce the experiment with analytical forcing to compare evolution of temperature profiles. This model experiment shows that 0-D model underestimates ice thickness and overestimates the amplitude of temperature profile variation compared to 1-D solution. Despite the large differences in thickness and internal temperatures, the surface temperatures are very close. The models were also validated on the data of the SHEBA field experiment. According to comparison with observation data, the 0-D model predicts ice thickness and spatiotemporal temperature distribution much worse compared to 1-D model, but the amplitude of error in surface temperature is slightly greater for 0-D code. It can be concluded that 0-D model of sea ice thermodynamics is a good tool for predicting surface temperature, but it gives a large error in thickness and temperature distribution.

Real optical imaging simulation of laser-produced aluminum plasmas.

We developed a post-processing optical imaging model based on two-dimensional axisymmetric radiation hydrodynamics. Simulation and program benchmarks were performed using laser-produced Al plasma optical images obtained via transient imaging. The emission profiles of a laser-produced Al plasma plume in air at atmospheric pressure were reproduced, and the influence of plasma state parameters on radiation characteristics were clarified. In this model, the radiation transport equation is solved on the real optical path, which is mainly used to study the radiation of luminescent particles during plasma expansion. The model outputs consist of the electron temperature, particle density, charge distribution, absorption coefficient, and corresponding spatio-temporal evolution of the optical radiation profile. The model helps with understanding element detection and quantitative analysis of laser-induced breakdown spectroscopy.

Genome-Wide Identification, Phylogenetic Analysis and Expression Pattern Profiling of the Aquaporin Family Genes in Leuciscus waleckii

Aquaporin (Aqp) is a transmembrane-specific channel for small molecules that help in regulating homeostasis in fishes when adapting to changing environments, but its role in Amur ide’s response to alkaline stress is yet to be revealed. Therefore, the purpose of this study is to investigate the response of the Aqp gene exposed to alkaline water in Amur ide (Leuciscus waleckii) using a genome-transcriptional assay. Based on the results, we classified the Aqps of the L. waleckii (LwAqps) genome and analyzed its transcriptional expression profile and genetic evolution under carbonate alkalinity stress. A total of 18 Aqp genes were identified in four grades in L. waleckii. The highest Aqp gene expression was found in the gill and kidney of L. waleckii from the Wusuli River (WSL) in comparison to those in the Dali Lake (DL), whereas aqp3a, -3ap1, -7, and -9a expressions were found at intensively higher levels in the gill rather than in the kidneys and livers. The experiment of L. waleckii under alkalinity stress (carbonate alkalinity 50 mmol·L−1) and its recovery showed that the expressions of aqp0a, -3a, -3ap1, -7, -8aa, and -9a were upregulated in alkaline water and downregulated in freshwater. We identified 1460 single nucleotide polymorphism (SNP) markers in the Aqp genes. The average value of Fst of SNP markers in the CDS region was 0.177 ± 0.256, and the first 5% SNPs were identified at aqp3a and -11b. Residue Ser66 does not bring about an overall change in the three-dimensional structure of Aqp3a, but may change the penetration of solutes across the membrane. This indicates that Aqp genes are involved in the response of L. waleckii to alkaline stress, and aqp3a is one of the key genes involved in regulating L. waleckii’s adaptation to alkaline environments.

Monitoring observations of SMC X-1’s excursions (MOOSE) – II. A new excursion accompanies spin-up acceleration

ABSTRACTSMC X-1 is a high-mass X-ray binary showing superorbital modulation with an unstable period. Previous monitoring shows three excursion events in 1996–1998, 2005–2007, and 2014–2016. The superorbital period drifts from ≳60 to ≲40 d and then evolves back during an excursion. Here, we report a new excursion event of SMC X-1 in 2020–2021, indicating that the superorbital modulation has an unpredictable, chaotic nature. We trace the spin-period evolution and find that the spin-up rate accelerated 1 yr before the onset of this new excursion, which suggests a possible inside-out process connecting the spin-up acceleration and the superorbital excursion. This results in a deviation of the spin-period residual, similar to the behaviour of the first excursion in 1996–1998. In further analysis of the pulse profile evolution, we find that the pulsed fraction shows a long-term evolution and may be connected to the superorbital excursion. These discoveries deepen the mystery of SMC X-1 because they cannot be solely interpreted by the warped-disc model. Upcoming pointed observations and theoretical studies may improve our understanding of the detailed accretion mechanisms taking place.

Structures of vortex in Co-doped BaFe2As2 iron superconductors with different doping level by scanning Hall probe microscopy

The 122 iron arsenide unconventional superconductors are part of a new class of iron-based superconductors. Co-doped BaFe2xCoxAs2 (Ba-122) iron superconductors sample have been examine by scanning Hall probe microscopy (SHPM) technique to find out the magnetic properties of Ba-122 . Has been completed the evolution of profiles of vortices which has well isolated and it is as function of temperature, then utilized suitable technique to extract the temperature depending on penetration depth, .So, this allowed to deduce the temperature dependent on density of superfluid and it has been compared with α-model consequences for a (2-band) of superconductor. When the superfluid density for the BaFe2xCoxAs2 (Over D x= 0.113) sample. As result, the two gap -model has been fitted to the data with Δ1=4.25kTc, Δ2=1.92kTc , =0.708, 1=0.293 then a2=1. However, When values of for the BaFe2-xCoxAs2 (Over D x= 0.075) sample. Result of the superfluid density for BaFe2-xCoxAs2 with parameters are (Δ1=3.9k, Δ2=1.6k), =0.615 for Δ1, and =0.237, =1. Suitable parameters produce refer into the symmetry of the order parameter at hole pockets with the electron, and then the relative supports of the bands to the density of superfluid in the iron-based crystals.

Alarming Upward Trend in Multidrug-Resistant Bacteria in a Large Cohort of Immunocompromised Children: A Four-Year Comparative Study.

Documenting bacteremia at the onset of fever in immunosuppressed children is challenging; therefore, it leads to the early administration of broad-spectrum antibiotics. We aimed to analyse the evolution of antibiotic resistance profiles of bacterial bloodstream infections (BSI) and gut colonisations in a large cohort of immunocompromised children carrying a central venous catheter, in comparison with a prior, similar study conducted in our centre from 2014 to 2017. A retrospective, observational cohort study was conducted from January 2018 to December 2021, in a tertiary centre for paediatric immuno-haematology and oncology. Empirical antibiotic therapy was adapted to the immunosuppression risk group and prior bacterial colonisation. There was a mean of 6.9 BSI/1000 patient bed days. Multidrug-resistant bacteria (MDRB) associated BSI accounted for 35/273 (12.8%). The incidence of MDRB gum/gut colonisation and MDRB associated BSI increased annually and correlated with the level of immunosuppression (p = 0.024). One third (34.7%) of the BSI episodes were not associated with neutropenia. As compared to the previous study, an alarming emergence of MDRB responsible for gut colonisations and BSI in immunosuppressed children was reported over the last four years. The degree of immunosuppression directly correlates with the risk of having an MDRB gut colonisation or MDRB BSI.

Countercurrent imbibition in low-permeability porous media: Non-diffusive behavior and implications in tight oil recovery

Countercurrent imbibition is an important mechanism for tight oil recovery, that is, water imbibes spontaneously from the fracture into the porous matrix while oil flows reversely into the fracture. Its significance over cocurrent imbibition and forced imbibition is highlighted when permeability reduces. We used the computed tomography (CT) scanning to measure the one-dimensional evolution of water saturation profile and countercurrent imbibition distance (CID) at different fluid pressures, initial water saturations, and permeability. Surprisingly, experiments show that CID evolution for tight reservoir cores dramatically deviates from the classical diffusive rule (i.e., evolutes proportional to square root of time, t 0.5 ). At early stage, CID extends faster than t 0.5 (super-diffusive); while at late stage, CID extends much slower than t 0.5 (sub-diffusive). After tens of hours, the CID change becomes too slow to be practically efficient for tight oil recovery. This research demonstrates that this deviation from classic theory is a result of (1) a much longer characteristic capillary length than effective invasion depth, which eliminates full development of a classical displacement front; and (2) non-zero flow at low water saturation, which was always neglected for conventional reservoir and is amplified in sub-mili-Darcy rocks. To well depict the details of the imbibition front in this situation, we introduce non-zero wetting phase fluidity at low saturation into classical countercurrent imbibition model and conduct numerical simulations, which successfully rationalizes the non-diffusive behavior and fits experimental data. Our data and theory imply an optimum soaking time in tight oil recovery by countercurrent imbibition, beyond which increasing exposed fracture surface area becomes a more efficient enhanced oil recovery (EOR) strategy than soaking for longer time.

Unsteady Pressure-Driven Electrokinetic Slip Flow and Heat Transfer of Power-Law Fluid through a Microannulus

To guarantee the transporting efficiency of microdevices associated with fluid transportation, mixing, or separation and to promote the heat transfer performance of heat exchangers in microelectronics, the hydrodynamic behaviors at unsteady and steady states, as well as the thermal characteristics at the steady state in a pressure-driven electrokinetic slip flow of power-law fluid in a microannulus are studied. To present a more reliable prediction, the slip phenomenon at walls and nonlinear rheology of liquid are incorporated. The modified Cauchy momentum equation applicable to all time scales and energy equations, are analytically solved in the limiting case of a Newtonian fluid and numerically solved for power-law fluids. The transient velocity profile, time evolution of flow rate, temperature profile, and heat transfer rate are computed at different flow behavior indices, electrokinetic width, slip lengths, and Brinkman numbers, thereby, the coupling effect of nonlinear rheology, slip hydrodynamics, and annular geometry on flow and thermal behaviors is explored. The unsteady flow takes a longer time to achieve the steady state for shear thinning fluids or greater slip lengths. The flow behavior index and slip length play a significant role in the flow rate and heat transfer performance. The relevant discussion can serve as a theoretical guide for the operation and thermal management of annular geometry-related flow actuation systems.

Evolution of Antimicrobial Susceptibility to Penicillin in Invasive Strains of Streptococcus pneumoniae during 2007-2021 in Madrid, Spain.

The use of pneumococcal conjugate vaccines has affected the epidemiology and distribution of Streptococcus pneumoniae serotypes causing Invasive Pneumococcal Disease (IPD). The aim of this study was to analyze the evolution of the phenotypical profiles of antimicrobial susceptibility to penicillin (PEN) in all IPD strains isolated in Madrid, Spain, during 2007-2021. In total, 7133 invasive clinical isolates were characterized between 2007 and 2021. Levels of PENR and PNSSDR were 2.0% and 24.2%, respectively. In addition, 94.4% of all the PENR belonged to four serotypes, including 11A (33.6%), 19A (30.8%), 14 (20.3%) and 9V (9.8%). All the strains of serotype 11A, which is a non-PCV13 serotype, were detected after the year 2011. Serotypes 6C, 15A, 23B, 24F, 35B, 19F, 16F, 6B, 23F, 24B, 24A, 15F and a limited number of strains of serogroups 16 and 24 (non-typed at serotype level) were associated with PNSSDR (p < 0.05). PNSSDR strains of non-PCV13 serotypes 11A, 24F, 23B, 24B, 23A and 16F were more frequent from 2014 to 2021. The changes in S. pneumoniae serotype distribution associated with the use of conjugate vaccines had caused in our region the emergence of non-PCV13 pneumococcal strains with different PENR or PNSSDR patterns. The emergence of serotype 11A resistant to penicillin as the most important non-PCV13 serotype is a worrisome event with marked relevance from the clinical and epidemiological perspective.

Wide-band Timing of the Parkes Pulsar Timing Array UWL Data

In 2018 an ultra–wide-bandwidth low-frequency (UWL) receiver was installed on the 64 m Parkes Radio Telescope, enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here we present the analysis of a 3 yr data set of 35 ms pulsars observed with the UWL by the Parkes Pulsar Timing Array, using wide-band timing methods. The two key differences compared to typical narrowband methods are (1) generation of two-dimensional templates accounting for pulse shape evolution with frequency and (2) simultaneous measurements of the pulse time of arrival (TOA) and dispersion measure (DM). This is the first time that wide-band timing has been applied to a uniform data set collected with a single large fractional bandwidth receiver, for which such techniques were originally developed. As a result of our study, we present a set of profile evolution models and new timing solutions, including initial noise analysis. Precision of our TOA and DM measurements is in the range of 0.005–2.08 μs and (0.043–14.24) × 10−4 cm−3 pc, respectively, with 94% of the pulsars achieving a median TOA uncertainty of less than 1 μs.

Graetz problem for the Rabinowitsch fluid model: A comparative analysis for circular tube and flat channel

The current set of themes related to the analysis of heat transfer by convection and heat transfer in a tube or channel is commonly referred to as the Graetz problem, which is to investigate the evolution of the temperature profile for a fluid flow in hydrodynamic developed laminar flow. The current research, in this regard, reports the Graetz problem for the constant wall(s) temperature case using the Rabinowitsch fluid model. The associated energy equation is solved via a classical separation of variable approach. The special case of the Rabinowitsch fluid model is also highlighted. The resultant boundary value problem is addressed computationally using the Matlab bvp4c function and the Runge–Kutta method. The real and positive eigenvalues along with the numerical solutions are obtained for the calculation of the temperature field. This study also explains that the Rabinowitsch model has both shear-thinning and shear-thickening effects. The impact of model parameters on mean temperature and Nusselt numbers are thoroughly examined with various graphs.

Secondary Metabolites in Nectar-Mediated Plant-Pollinator Relationships.

In recent years, our understanding of the complex chemistry of floral nectar and its ecological implications for plant-pollinator relationships has certainly increased. Nectar is no longer considered merely a reward for pollinators but rather a plant interface for complex interactions with insects and other organisms. A particular class of compounds, i.e., nectar secondary compounds (NSCs), has contributed to this new perspective, framing nectar in a more comprehensive ecological context. The aim of this review is to draft an overview of our current knowledge of NSCs, including emerging aspects such as non-protein amino acids and biogenic amines, whose presence in nectar was highlighted quite recently. After considering the implications of the different classes of NSCs in the pollination scenario, we discuss hypotheses regarding the evolution of such complex nectar profiles and provide cues for future research on plant-pollinator relationships.

Paths of Evolution of Progressive Anaplastic Meningiomas: A Clinical and Molecular Pathology Study

Grade 3 meningiomas are rare malignant tumors that can originate de novo or from the progression of lower grade meningiomas. The molecular bases of anaplasia and progression are poorly known. We aimed to report an institutional series of grade 3 anaplastic meningiomas and to investigate the evolution of molecular profile in progressive cases. Clinical data and pathologic samples were retrospectively collected. VEGF, EGFR, EGFRvIII, PD-L1; and Sox2 expression; MGMT methylation status; and TERT promoter mutation were assessed in paired meningioma samples collected from the same patient before and after progression using immunohistochemistry and PCR. Young age, de novo cases, origin from grade 2 in progressive cases, good clinical status, and unilateral side, were associated with more favorable outcomes. In ten progressive meningiomas, by comparing molecular profile before and after progression, we identified two subgroups of patients, one defined by Sox2 increase, suggesting a stem-like, mesenchymal phenotype, and another defined by EGFRvIII gain, suggesting a committed progenitor, epithelial phenotype. Interestingly, cases with Sox2 increase had a significantly shortened survival compared to those with EGFRvIII gain. PD-L1 increase at progression was also associated with worse prognosis, portending immune escape. We thus identified the key drivers of meningioma progression, which can be exploited for personalized treatments.

E-Nose Quality Evaluation of Extra Virgin Olive Oil Stored in Different Containers

The degradation process of virgin olive oil (VOO) is related to storage time and the type of storage container used. The aim of this work is to explore the evolution of the VOO quality stored in different container types over a defined storage period in order to predict the organoleptic characteristics using a non-destructive technique such as the electronic-nose (E-nose). The “Picual” variety VOO was stored in different containers over a period of 21 months and monitored using sensory analysis, volatile compounds, and an E-nose. The panelists showed that oil stored in dark glass bottles and in green polyethylene bottles began to show defects after 12 and 15 weeks, respectively. However, oil stored in tin containers retained its quality throughout the 21 months studied. A total of 31 volatile compounds were identified, and the evolution of the volatile profile in the different containers during the storage period was studied. The E-nose data were able to classify oil quality by container using principal component analysis (PCA). Furthermore, the E-nose data combined with partial least squares (PLS) regression enabled the building of a predictive model to quantify sensory defect values (RCV2 = 0.92; RCV2 = 0.86), evidencing that this technique would be an appropriate screening tool to support a sensory panel.

Conductive path and local oxygen-vacancy dynamics: Case study of crosshatched oxides

By employing scanning probe microscopy, conductive path and local oxygen-vacancy dynamics have been investigated in crosshatched La0.7Sr0.3MnO3 thin films grown onto flat and vicinal LaAlO3(001) single crystal substrates. Consistent with prior studies, the crosshatch topography was observed first by dynamical force microscopy as the epi-stain started to release with increasing film thickness. Second, by using conductive atomic force microscopy (CAFM), conductive crosshatch and dots (locally aligned or random) were unravelled, however, not all of which necessarily coincided with that shown in the in situ atomic force microscopy. Furthermore, the current–voltage responses were probed by CAFM, revealing the occurrence of threshold and/or memristive switchings. Our results demonstrate that the resistive switching relies on the evolution of the local profile and concentration of oxygen vacancies, which, in the crosshatched films, are modulated by both the misfit and threading dislocations.

Tectonic evolution and its control on oil–gas accumulation in southern East China Sea since the Jurassic

Based on the results from the previous research on Mesozoic igneous rocks, as well as tectonic environments in the northern South China Sea and southern East China Sea (NSCS-SECS), geophysical parameters, strata, and characteristics of seismic facies in NSCS-SECS were investigated. These findings were combined with results from the analysis of the balanced profile evolution to re-evaluate the tectonic evolution of SECS since the Jurassic. Furthermore, burial history and simulation of wells in the SECS were analyzed using well, seismic and source rock data. Furthermore, favorable models of oil–gas accumulation in the Lower–Middle Jurassic were proposed in combination with studies on elements and conditions of the petroleum system. The results demonstrated that the NSCS-SECS had consistent tectonic settings and comparable strata from the Jurassic to the Cretaceous time. There was a large unified basin in this period. The basin experienced two evolutionary stages, respectively, the fore-arc depression basin in the Early–Middle Jurassic (J1-2) and the back-arc faulted basin in the Late Jurassic–Cretaceous (J3-K). There was considerable deposition of dark mudstones in the SECS during the Lower–Middle Jurassic. The Keelung Sag was the depositional center accumulating the thickest section of the Lower–Middle Jurassic source rocks which entered a high-maturity stage. Hence, it was the hydrocarbon generation center in the SECS. The process of generating hydrocarbons from Lower–Middle Jurassic source rocks was of high complexity from northwest to southeast. The Lower–Middle Jurassic source rock at the northwest edges of the basin experienced two hydrocarbon generation stages, while the Keelung Sag toward the southeast experienced three hydrocarbon generation stages. The models and types of oil–gas accumulation in various evolutionary phases were different due to the control by tectonic evolution. Oil and gas that were generated by Lower–Middle Jurassic source rocks in the Keelung Sag migrated and accumulated in the western high-tectonic units. Research findings provide insights into Mesozoic oil and gas exploration in the NSCS-SECS.

Real‐time estimation of the electron temperature profile in DIII‐Dby leveragingneural‐networksurrogate models

AbstractControl of both the magnitude and the shape of tokamak profiles will be necessary to achieve stable, high‐performance plasmas. In order to reject disturbances in real time, feedback‐control algorithms rely on accurate real‐time knowledge of the plasma state. When diagnostics alone are insufficient, because they are limited in number or their measurements are too noisy, observers can be used to combine diagnostic data with a response model to provide a better estimation of different plasma properties. An observer has been developed to estimate the electron temperature profile in real time using both diagnostic data from the Thomson scattering system and a model based on the electron heat transport equation describing the evolution of the electron temperature profile. Neural network surrogate models are leveraged to help improve the overall model prediction while staying within computation time constraints for real‐time use. The observer algorithm is shown in offline tests to produce smooth profiles that are consistent with both the diagnostic data and the electron heat transport equation. When implemented into the real‐time plasma control system, this observer will provide valuable information on the electron temperature profile to many potential feedback‐control applications.

Influence of ASCAT soil moisture on prediction of track and intensity of landfall tropical cyclones

ABSTRACT The current study attempted to evaluate the impact of Soil Moisture (SM) initial conditions in a regional NWP system on the simulation of land falling cyclones over North Indian Ocean region. SM initial conditions used in this study are created using a simplified EKF based LDAS, in which satellite derived SM information is also used. Here, two sets of numerical experiments using regional NWP system are performed with two different sets of SM initial conditions. The CTL (assimilated only surface level observations in LDAS) and ASCAT (assimilated satellite derived SM plus observations used in CTL) experiments are performed to understand the impact of SM initial conditions in NCUM-R NWP system. The atmospheric initial conditions for both experiments are prepared through 4DVAR assimilation technique. This study shows that high resolution regional model initialized with improved SM initial conditions created using satellite observations could improve structure, intensity, track and evolution of the storms. The positive values of humidity Jacobians are noticed over the regions affected by storms mainly in ASCAT. The evolution of vorticity tendency and convergence profiles is well differentiated in ASCAT as the system moved from higher to lower intensity stage or vice versa, but that pattern is not observed in CTL. The value of static stability indices is varying with strength of cyclones, which are well represented in ASCAT and are also well matched with observations. The evolution of magnitude of diabatic heating in and around the storm core region is more realistic in ASCAT than CTL. The moisture budget terms are improved in ASCAT, the contribution of moisture convergence (evaporation) to the precipitation is more over the oceanic (land) region before and after landfall of storm. The study deduced that accurate SM initial conditions are essential for better prediction of structure and intensity of high impact weather events.

Aging of Malbec Wines from Mendoza and California: Evolution of Volatile Composition

<h3>Abstract</h3> <h3>Background and goals</h3> The search for strategies to improve the quality of Argentine Malbec wines has led to experimentation with production of wines that achieve superior sensory properties after prolonged bottle aging. During aging, a series of complex oxidation-reduction and polymerization reactions occur. These reactions, responsible for changing the sensory aspects of wines, can be influenced by a variety of factors (terroir, winemaking practices, storage conditions, etc.). Thus, understanding the chemical processes that take place during bottle aging could significantly impact the enology industry. This work evaluates the evolution of aromatic profiles over time in Malbec wines from Mendoza and California. <h3>Methods and key findings</h3> Wines from Mendoza and California were obtained under standardized conditions. Determination of volatile profiles was carried out on young wines by gas chromatography-mass spectrometry and, subsequently, after seven years of aging. The effect of time and region on volatile profiles was investigated. The aging time showed a significant effect on the aromatic composition. While the profiles obtained after seven years were less diverse than at bottling, they retained a significant number of desirable volatile compounds. Additionally, the volatile profiles of the aged wines still permitted differentiation of samples by country of origin. <h3>Conclusions and significance</h3> The information obtained enabled us to assess the evolution of aromatic profiles during bottle aging of Malbec wines from Mendoza and California, and could be useful in decision-making regarding the blending, marketing, and storage of these wines.