Production Techniques Research Articles

Resource classification of coal bed methane and its contribution in energy transition and decarbonization path of oil and gas industry (A synopsis of CBM Life Cycle Analysis)

World economies are becoming increasingly more dependent on energy and countries have a voracious appetite for energy therefore, the need for an abundant clean energy is becoming a necessity. Energy companies are challenging environmental costs of coal bed methane as with advancement of new technology the impact from production of coal bed methane can reduce and to a certain extent avoided or offset. Production of coal bed methane results in changes to the land, to surface water and to ground water systems. Carbon quantification is required to understand, monitor and manage these changes. Previous life cycle analysis for this resource class has lack of process design details because of which there is a knowledge gap in understanding of emission profile of coal bed methane’s production. The objective of this study is to add value and reduce the scientific gap with respect to the production techniques of coal bed methane and its environmental impact. Removal of water continuously from coal seams depletes ground water and may eventually lower surface water flows (streams and rivers). It can also change the flow of groundwater drawing fresh water into the coal seams. To better understand this phenomenon the work establishes the Coal Bed Methane production foundation by in depth understanding of · Coal Bed Methane reservoir types; · Coal Bed Methane depositional environment, generation, and geological distributions; · Coal Bed Methane resource energy supply methods by understanding its construction, production and processing. The study then uses Life Cycle Assessment approach and understands previous emission numbers of Coal Bed Methane’s resource development. The work does systematic analysis and summarizes the previously published Life Cycle Analysis to understand further the potential environmental impacts of resource development of Coal Bed Methane. This will help energy companies to understand the field development, production, and operations of coal bed methane’s resource in terms of carbon numbers thereby optimizing the operations through carbon management thus reducing the potential impacts.

A critical review on scale-up strategies of biosurfactant production and its applications

Abstract Eco-friendly, biodegradable, microbially produced surfactants, known as biosurfactants, have been intensively studied for their ability as potential substitutes for their synthetic counterparts. Currently, the commercialization of biosurfactants compared to synthetic (chemical) surfactants remains an economic challenge due to high production costs and lower yields. This review details the challenges and better strategies for industrial scale-up of biosurfactant production and downstream processing techniques. An analysis of the use of low cost, renewable substrates, parameter optimization, strain improvement, bioreactor engineering is discussed. The role of various engineering factors that help in scale-up of biosurfactant production such as drag coefficient, Reynolds number, Enrichment ratio, Eӧtvӧs number have also been considered in this review article. The review article demonstrates the potential activity of integrated separation processes and applications of biosurfactants, bringing biosurfactants into mainstream commercialization.

Integrated Models of Cleaner Production Technologies for Maize Cultivation in China’s Black Soil Regions

Incorporating carbon footprints into the production efficiency framework to construct a standardized technology model for cleaner production in black soil regions is of great significance for improving the soil environment and the sustainable development of agriculture. This study used an orthogonal experimental design and the DEA–Malmquist method to calculate the carbon footprint and total factor productivity of orthogonal experimental groups of cleaner production technologies for maize cultivation in China’s black soil region and then identified integrated models of cleaner production technology in the black soil region. The results showed that the carbon footprint of maize cultivation and total factor productivity were generally higher in the experimental group using cleaner production techniques than in the control group. Still, none of them reached the optimum. In the future, the synergistic effect of technological progress and technological efficiency enhancement should be brought into play, and the integrated models of “Soil testing and formulation + Full mobile sprinkler irrigation + Straw tilling and field return” and “No tillage in spring + Soil testing and formulation + Straw tilling and field return” should be promoted in semi-arid and semi-humid black soil regions, which can improve the low carbon productivity of maize by 20.3% and 15.4%, respectively.

Variety Breeding Studies on Hesperis isatidea (Boİss.) D.A. German & Al-Shehbaz

Hesperis isatidea (Boiss.) D.A.German & Al-Shehbaz, a member of the Brassicaceae family, represents a distinctive natural species characterized by its fragrant, conspicuous inflorescences, unique flower coloration, and distinct feather-like foliage. The Turkish name of the species is known as “Allı Gelin”. This species is native, exhibiting resilience to drought conditions and requiring minimal care. Cultivation studies on this species were carried out at Erzincan Horticulture Research Institute (Turkey) with project number 106G022 within the scope of TÜBİTAK (Turkish Scientific and Technological Research Council). The research aimed to determine optimal production techniques through generative and vegetative propagation methods. The project, initiated in 2013 and concluded in 2022, focused on developing a cultivar of the Allı Gelin plant using texel selection breeding techniques. Thirteen populations of Allı Gelin from institute's gene pool were utilized. Employing the Texel Selection method, four distinct lines were identified: compact, tightly spread compact, pyramid1and pyramid-2 shaped. Subsequent baby plant tests revealed stability in the tightly spread compact and pyramid-1 lines, leading to their selection for further breeding. Although breeding efforts continued on the compact line, the pyramid-2 line was discontinued due to an inability to attain the desired stability. The successfully tested variants, namely the pyramid-1 and tightly spread compact forms, have been earmarked as candidates for outdoor ornamental plant varieties. Registration procedures for these candidates are underway. These new varieties promise to enrich diversity within the ornamental plants sector, potentially enhancing competitiveness in foreign markets.

Pottery kiln from the second half of the 13th century in Žďár nad Sázavou – Staré Město (Czech Republic)

This study investigates a medieval pottery kiln and its fill excavated at a 13th-century settlement site near the Žďár Cistercian monastery. The short 30–40 year lifespan of the settlement provides valuable insight into how pottery was made and appeared in a chronologically specified timeframe of the mid-13th century. The kiln was a single-chamber type, either with an open-topped or domed superstructure with a very narrow stoking channel in terms of height. Technological analysis of the pottery inside the kiln points to consistent production techniques utilising a combination of coiling and early rotational devices with rapid firing practices. The interpretation of the forming technique is backed by 3D scanning, which quantifies the wall thickness variability over various vessel body parts. Cross-analysis with settlement finds shows a uniform ceramic morphology and technological nuances, with petrographic data suggesting both local and external material influences. The study enhances the understanding of the socio-economic dynamics during medieval colonisation based on the case of the Žďár region and provides a benchmark for regional ceramic research.

Morphology-controlled nickel-organic framework nanosheet arrays for efficient urea electrolysis in alkaline media

Urea electrolysis is considered as a promising energy-saving hydrogen production technique to substitute the water electrolysis, but it is restricted by the lack of efficient and cost-effective catalysts. Herein, nickel foam supported three-dimensional (3D) nickel-organic framework nanosheet arrays (Ni-BDC-t/NF, where t is the reaction time) comprising Ni2+ and an organic ligand of 4,4-biphenyl dicarboxylic acid (BDC) are synthesized as catalyst for urea electrolysis in alkaline media. Benefiting from the highly exposed Ni active sites and fast electron transfer rate endowed by 3D nanosheet array architecture, the structurally optimized Ni-BDC-10/NF exhibits preeminent electrocatalytic activity and durability toward urea oxidation reaction (UOR). To deliver a high current density of 100 mA cm−2, the required UOR potential of Ni-BDC-10/NF is only 1.50 V vs. RHE. Significantly, by further coupling with the cathodic hydrogen evolution reaction, the urea electrolysis system based on Ni-BDC-10/NF self-supporting anode exhibits a dramatic voltage decrease by 340 mV at a current density of 50 mA cm−2 as compared with that of water electrolysis under the same conditions. This study provides some new ideas for developing high-efficiency nickel-based organic framework catalysts and their application in urea-related energy storage devices.

Recent advances in micro-pixel light emitting diode technology

Display technology has developed rapidly in recent years, with III–V system-based micro-light-emitting diodes (μLEDs) attracting attention as a means to overcome the physical limitations of current display systems related to their lifetime, brightness, contrast ratio, response time, and pixel size. However, for μLED displays to be successfully commercialized, their technical shortcomings need to be addressed. This review comprehensively discusses important issues associated with μLEDs, including the use of the ABC model for interpreting their behavior, size-dependent degradation mechanisms, methods for improving their efficiency, novel epitaxial structures, the development of red μLEDs, advanced transfer techniques for production, and the detection and repair of defects. Finally, industrial efforts to commercialize μLED displays are summarized. This review thus provides important insights into the potential realization of next-generation display systems based on μLEDs.

Towards a Sustainable Laser Powder Bed Fusion Process via the Characterisation of Additively Manufactured Nitinol Parts

Is additive manufacturing (AM) a sustainable process? Can the process be optimised to produce sustainable AM parts and production techniques? Additive manufacturing offers the production of parts made of different types of materials in addition to the complex geometry that is difficult or impossible to produce by using the traditional subtractive methods. This study is focused on the optimisation of laser powder bed fusion (L-PBF), one of the most common technologies used in additive manufacturing and 3D printing. This research was carried out by modulating the build layer thickness of the deposited metal powder and the input volumetric energy density. The aim of the proposed strategy is to save the build time by maximizing the applied layer thickness of nitinol powder while retrieving the different AM part properties. The saving in the process time has a direct effect on the total cost of the produced part as a result of several components like electric energy, inert gas consumption, and labour. Nickel-rich nitinol (52.39 Ni at.%) was selected for investigation in this study due to its extremely high superplastic and shape memory properties in addition to the wide application in various industries like aerospace, biomedical, and automotive. The results obtained show that significant energy and material consumption can be found by producing near full dens AM parts with limited or no alteration in chemical and mechanical properties.

ATPSpin: A Single Microfluidic Platform that Produces Diversified ATPS-Alginate Microfibers.

Microfluidic spinning is emerging as a useful technique in the fabrication of alginate fibers, enabling applications in drug screening, disease modeling, and disease diagnostics. In this paper, by capitalizing on the benefits of aqueous two-phase systems (ATPS) to produce diverse alginate fiber forms, we introduce an ATPS-Spinning platform (ATPSpin). This ATPS-enabled method efficiently circumvents the rapid clogging challenges inherent to traditional fiber production techniques by regulating the interaction between alginate and cross-linking agents like Ba2+ ions. By varying system parameters under the guidance of a regime map, our system produces several fiber forms─solid, hollow, and droplet-filled─consistently and reproducibly from a single device. We demonstrate that the resulting alginate fibers possess distinct features, including biocompatibility. We also encapsulate HEK293 cells in the microfibers as a proof-of-concept that this versatile microfluidic fiber generation platform may have utility in tissue engineering and regenerative medicine applications.

О литейной форме из поселения эпохи бронзы Тарангул в Актюбинском Приуралье

Introduction. In 2021, the Mugodzhar (Mugalzhar) Crew of the Margulan Institute of Archaeology investigated the site of Tarangul and discovered a casting mold ― a rare artifact of utmost interest related to metal production and processing. Goals. The article seeks to describe and analyze the Bronze Age mold from Tarangul located in the Aktobe Cis-Urals, introduce into scholarly circulation some newly obtained scientific data. Results. The implemented analyses include those of natural science (micro-wear and spectral ones) and comparative typology, the latter to yield a classification of castings and their cultural affiliation. The tool mold has two surfaces with negative impressions. The first one was used to cast three sickles, while the second one (once consisted of two pieces) would cast a flat adze. The shapes attest to the mold was used to cast Kundravinskaya-type sickles widespread across the Late Bronze Age Southern Urals, Middle Volga, and Western Siberia. Kundravinskaya-type sickles are associated with the Alakul culture, the Kozhumberdy cultural group being a local variant of the latter in the region under study. The shape of the impression on the reverse side is characteristic of adzes from the Alakul era discovered in western parts of Eurasia’s steppe zone. The study concludes the mold had first consisted of two pieces and been used to cast adzes, and after the other piece was lost or damaged it started being used to cast sickles. The spectral analysis shows the castings were basically made from copper, and detects some traces of alloying. Another finding is that the three mold negatives were used not simultaneously but rather when and as it was necessary. In general, the conducted tests have well reconstructed the manufacturing techniques and stages of use for the mold from the Late Bronze Age settlement of Tarangul in the Aktobe Cis-Urals, and highlighted certain aspects in the study of molds as a specific source on metal production techniques and technologies in prehistory.

Techno-economic analysis of a novel concept for the combination of methane pyrolysis in molten salt with heliostat solar field

Methane pyrolysis has emerged as a promising low-carbon hydrogen production method, serving as a bridge from conventional fossil fuels to renewable energies (REs). A recent technique for sustainable hydrogen production involves the process of methane pyrolysis in molten salt. To better understand the potential of sustainable turquoise hydrogen production, this paper presents a techno-economic assessment of methane pyrolysis in molten salt combined with a high-temperature heliostat solar field. In addition, a high-temperature thermal energy storage (HTES) unit is utilized to ensure uninterrupted hydrogen production during periods of solar unavailability, thereby contributing to the economic viability of the overall system. The proposed system can produce about 9 tons of H2/day and 27 tons of solid carbon/day with a round-trip efficiency of 49.8 % and a levelized cost of hydrogen (LCOH) of 1.93 $/kg. To further decarbonize the process, the feasibility of utilizing REs as the source of electricity for the HTES was analyzed, yielding a synergistic achievement of clean and economic hydrogen production. This configuration resulted in a LCOH of 1.25 $/kg, after including the United States (US) clean hydrogen production tax incentives. The proposed system shows the potential to achieve the US Department of Energy target of 1 $/kg of hydrogen with a 20 % reduction in the cost of RE infrastructure.

Impact of Encapsulated Saccharomyces cerevisiae Yeasts on the Chemical and Sensory Profiles of Sparkling Cider Produced by the Champenoise Method

The cider market has been significantly expanding and gaining momentum in Eastern Europe. As such, the aim of this study was to obtain sparkling cider via the Champenoise method using two Romanian apple varieties (Topaz and Red Topaz) alongside the employment of two fermentations. Four yeast strains were used in the first fermentation, while encapsulated Saccharomyces cerevisiae was used in the second fermentation. The resulting cider was subjected to a comprehensive investigation to quantitatively determine the carbohydrates, organic acids, volatile and phenolic compounds, and amino acids from all the cider samples. A trained panel evaluated the sensory profile of the samples, and a chemometric analysis was used to interpret the data. Secondary fermentation increased the accumulation of malic acid and lactic acid, as well as the volatile profile complexity. The total polyphenol content in the sparkling cider samples increased by almost 20% in the S. cerevisiae sample and over 217% in the P. kluyveri + S. cerevisiae sample compared to the base cider. Additionally, studying the production and consumption trends of sparkling cider offers valuable insights for both producers and consumers. By understanding consumer preferences and refining production techniques, the industry can deliver higher-quality products that better align with market demands.

A Look at Genomic Selection Techniques for Climate Change Adaptation and Production in Livestock

Livestock production profoundly intersects with global climate dynamics, contributing to greenhouse gas emissions and confronting vulnerability to climate impacts. In addressing these challenges, imperative adjustments are requisite to fortify the climate robustness of livestock systems. Notably, the prevalent reliance on commercial breeds with limited genetic diversity exposes production strategies to disruption, especially if these breeds are confined to environments that may lose economic viability under future climate scenarios. Consequently, understanding the adaptability of animal populations to forthcoming environmental conditions is paramount for sustaining livestock production. Assessing the genetic underpinnings of climate adaptation necessitates the exploration of tailored genomic selection techniques encompassing both production traits, presumed to have moderate heritability, and adaptation traits, presumed to have low heritability. Through a nuanced examination of genomic selection dynamics, insights into the genetic mechanisms fostering resilience in livestock populations amidst shifting environmental contexts are garnered. Employ genomic analysis to pinpoint genetic markers associated with traits like heat tolerance, disease resistance, and feed efficiency in livestock. Collaborate across disciplines to develop tailored breeding programs integrating these markers, and validate their effectiveness through rigorous field trials and ongoing monitoring to enhance livestock resilience and productivity in varied climatic conditions. Elucidating these mechanisms and their application in breeding programs offers a comprehensive understanding of how genetic advancements can enhance both production efficiency and climate resilience in livestock. This discourse aims to bridge the chasm between scientific inquiry and pragmatic implementation, thereby facilitating informed decision-making in livestock breeding strategies tailored to mitigate the ramifications of climate change.

Direct Synthesis of Calcium Lactate through the Reaction of Glycerol with Calcium Hydroxide Catalyzed by Bimetallic AuCu/SiO2 Nanocatalysts

Bimetallic AuCu/SiO2 nanosized catalysts were prepared using the wet chemical reduction technique. From among Au0.1–1.5Cu10/SiO2 catalysts, the Au0.5Cu10/SiO2 catalyst gave the highest yield of calcium lactate of 87% at a glycerol conversion of 96% when the reaction of glycerol with calcium hydroxide at a mole ratio of calcium hydroxide to glycerol of 0.8:1 was conducted under an anaerobic atmosphere at 200 °C for 2 h. The interactions between metallic Au0 and Cu0 nanoparticles facilitate calcium lactate formation. The simulation of glycerol consumption rate with an empirical power-function reaction kinetics equation yielded a reaction activation energy of 44.3 kJ∙mol−1, revealing that the catalytic reaction of glycerol with calcium hydroxide to calcium lactate can be conducted by overcoming a mild energy barrier. The synthesis of calcium lactate through the catalytic reaction of glycerol with calcium hydroxide on a bimetallic AuCu/SiO2 nanosized catalyst under a safe anaerobic atmosphere is an alternative to the conventional calcium lactate production technique through the reaction of expensive lactic acid with calcium hydroxide.

Ceramic Matrix Composites: Classifications, Manufacturing, Properties, and Applications

Ceramic matrix composites (CMCs) are a significant advancement in materials science and engineering because they combine the remarkable characteristics of ceramics with the strength and toughness of fibers. With their unique properties, which offer better performance and endurance in severe settings, these advanced composites have attracted significant attention in various industries. At the same time, lightweight ceramic matrix composites (LCMCs) provide an appealing alternative for a wide range of industries that require materials with excellent qualities such as high-temperature stability, low density, corrosion resistance, and excellent mechanical performance. CMC uses will expand as production techniques and material research improve, revolutionizing aerospace, automotive, and other industries. The effectiveness of CMCs primarily relies on the composition of their constituent elements and the methods employed in their manufacturing. Therefore, it is crucial to explore the functional properties of various global ceramic matrix reinforcements, their classifications, and the manufacturing techniques used in CMC fabrication. This study aims to overview a diverse range of CMCs reinforced with primary fibers, including their classifications, manufacturing techniques, functional properties, significant applications, and global market size.

Exploring the potential of ammonia and hydrogen as alternative fuels for transportation

Abstract This study investigates the potential of hydrogen and ammonia, as alternatives for transportation fuels to tackle urgent issues concerning greenhouse gas emissions and air quality in the worldwide transportation sector. By examining studies and technological progresses, we evaluate the feasibility of transitioning to these energy options. Through an investigation of production methods, energy efficiency, environmental consequences, and infrastructure requirements, we present both the advantages and disadvantages of using hydrogen and ammonia as fuel substitutes. We spotlight production techniques such as electrolysis and renewable energy sources that could significantly decrease carbon emissions and air pollutants. Nonetheless, key challenges such as expanding infrastructure, cost-effectiveness, and safety considerations need to be resolved for adoption. Drawing on findings from research and industry developments, this article contributes to publications on transportation solutions while proposing avenues for research efforts and policy initiatives. Existing challenges and limitations are also discussed in details. In conclusion, this research underscores the significance of research endeavors and policy backing to unlock the potential of hydrogen and ammonia as sustainable transportation fuels underscoring their role in mitigating environmental impacts and promoting global sustainability objectives.

Advances in Breeding for Oil Quality Enhancement in Indian Mustard (Brassica spp. L.): Achievements, Challenges, and Research Opportunities

Major objectives in oil crop improvement are enhancement of seed and oil yield, quality of oil according to its use, i.e. edible or industrial uses, breeding of varieties that fit in different cropping systems and breeding biotic and abiotic stress resistant/tolerant varieties. Despite traditional breeding approaches, including pure line breeding, yielding only modest gains in productivity, recent advancements in mustard breeding have led to significant breakthroughs in both productivity and oil quality. This review discusses the innovative breeding strategies that have contributed to these advancements, with a focus on hybrid development, oil quality enhancement, and biotechnological approaches. To enhance productivity, researchers at the University of Delhi have developed hybrid seed production techniques using transgenic Barnase-barstar systems and cytoplasmic male sterility (CMS) systems. These systems enable large-scale hybrid seed production, with field trials demonstrating significant yield heterosis ranging from 31% to 55% compared to national check varieties. In addition to productivity, improving oil and meal quality has been a key objective. By integrating genes from canola-quality mustard lines, breeders have achieved reductions in erucic acid and glucosinolates, enhancing the health profile and industrial applicability of mustard oil. A high-density linkage map developed using an F1 double haploid mapping population has facilitated the marker-assisted backcross breeding of desirable traits, enabling precise transfer of key quality traits. Transgenic approaches, such as antisense RNA technology, have led to the development of high-oleic, low-linoleic mustard lines with improved fatty acid profiles. These advancements reflect a strategic combination of conventional and biotechnological methods, demonstrating a clear pathway for boosting mustard yields while enhancing oil quality. Molecular markers reported for genetic diversity assessment, mapping and tagging genes/QTLs for different qualitative and quantitative traits and their use in marker-assisted selection have been presented. This progress not only addresses current challenges but also sets the stage for future research aimed at further optimizing productivity, oil quality, and resistance to pests and diseases in mustard cultivation.

Optimizing Operational Parameters for Lithium Hydroxide Production via Bipolar Membrane Electrodialysis

Traditional lithium hydroxide production techniques, like lithium sulfate and lithium carbonate causticizing methods, suffer from drawbacks including high specific energy consumption, time-consuming processes, and low recovery rates. The conversion of lithium chloride to lithium hydroxide using bipolar membrane electrodialysis is straightforward; however, the influence of operational parameters on bipolar membrane electrodialysis performance have not been investigated. Herein, the impact of the current density (20 mA/cm2~80 mA/cm2), feed concentration (0.5 M~2.5 M), initial feed pH (2.5, 3.5 and 4.5), and the volume ratio of the feed and base solution (1:1, 2:1 and 3:1) on the current efficiency and specific energy consumption in the bipolar membrane electrodialysis was systematically investigated. The bipolar membrane electrodialysis process showed promising results under optimal conditions with a current density of 50 mA/cm2 and an initial lithium chloride concentration of 1.5 M. This process achieved a current efficiency of 75.86% with a specific energy consumption of 3.65 kwh/kg lithium hydroxide while also demonstrating a lithium hydroxide recovery rate exceeding 90% with a purity of about 95%. This work will provide valuable guidance for hands on implementation of bipolar membrane electrodialysis technology in the production of LiOH.

Continuous production machine for separating and shaping Taiping Houkui tea.

In response to the challenges of low automation and a lack of a continuous processing system for Taiping Houkui tea, this study proposed a design scheme for a continuous processing line and built a continuous processing prototype for testing by combining the production requirements of Taiping Houkui tea, the characteristics of withered leaves, and the existing relevant production equipment. First, the physical properties of Taiping Houkui tea were determined. A simulation was performed using the Hertz-Mindlin model, and the motion states of the tea leaves were obtained under different conditions to define the parameter design range of the experimental platform and verify its structural rationality. Then, the response surface methodology was used to optimize the working parameter ranges and obtain the best working parameters for the feeding and kneading mechanisms. Finally, a continuous production prototype was constructed for further production verification. The experimental results show that the success rate of continuous production on this platform was 70.68%, with an average output of approximately 0.4kg/h for Taiping Houkui dry tea on a single slide track, and the produced tea was similar to manually made tea. This demonstrates that the continuous production technique has high feasibility and provides a reference for continuous production of Taiping Houkui tea.

SPAN secondary particles enabled high energy density Lithium-Sulfur battery

High-areal-capacity electrodes and lean electrolyte are practical approaches for batteries to enhance their energy density, while it’s challenge for the lithium-sulfur batteries using nano-sized sulfurized polyacrylonitrile (SPAN) cathodes due to the sluggish charge transportation. Here, a spray-drying (SD) technique for mass production of micron-sized SPAN secondary particles (PC-SPAN) with composite coating is proposed. The composite involves polydopamine (PDA), polyacrylic acid (PAA) and polyvinyl alcohol (PVA) that physiochemically crosslinking. The rich catecholamine, hydroxyl and carboxyl groups not only construct strong and flexible adhesion among the SPAN primary particles to keep the electrode integrity, but also render built-in ion passage within the secondary particles to allow the electrode working under lean electrolyte condition. Consequently, PC-SPAN electrode with a high areal loading of 8.4 mg cm−2 delivers a higher specific capacity of 547.4 mAh g−1 at 0.3C when that of SPAN is less than 400.0 mAh g−1. In the meantime, prototype Li-SPAN battery with high energy density of 530.2 Wh kg−1 is achieved using PC-SPAN electrode with an areal capacity of 19.1 mAh cm−2 and low electrolyte/SPAN ratio of 0.93 μL mg−1, which demonstrates the feasibility of this strategy toward applicable high energy LSBs.