Production Of Dicarboxylic Acids Research Articles

An Eclectic Review on Dicarboxylic Acid Production Through Yeast Cell Factories and Its Industrial Prominence.

Dicarboxylic acid (DCA) is a multifaceted chemical intermediate, recoursed to produce many industrially important products such as adhesives, plasticizers, lubricants, polymers, etc. To bypass the shortcomings of the chemical methods of synthesis of DCA and to reduce fossil fuel footprints, bio-based synthesis is gaining attention. In pursuit of an eco-friendly sustainable alternative method of DCA production, microbial cell factories, and renewable organic resources are gaining popularity. Among the plethora of microbial communities, yeast is being favored industrially compared to bacterial fermentation due to its hyperosmotic and low pH tolerance and flexibility for gene manipulations. By application of rapidly evolving genetic manipulation techniques, the bio-based DCA production could be made more precise and economical. To bridge the gap between supply and demand of DCA, many strategies are employed to improve the fermentation. This review briefly outlines the advancements in DCA production using yeast cell factories with the exemplification of strain improvement strategies.

Enhancing the activity and succinyl-CoA specificity of 3-ketoacyl-CoA thiolase Tfu_0875 through rational binding pocket engineering

The 3-ketoacyl-CoA thiolase is the rate-limiting enzyme for linear dicarboxylic acids production. However, the promiscuous substrate specificity and suboptimal catalytic performance have restricted its application. Here we present both biochemical and structural analyses of a high-efficiency 3-ketoacyl-CoA thiolase Tfu_0875. Notably, Tfu_0875 displayed heightened activity and substrate specificity for succinyl-CoA, a key precursor in adipic acid production. To enhance its performance, a deep learning approach (DLKcat) was employed to identify effective mutants, and a computational strategy, known as the greedy accumulated strategy for protein engineering (GRAPE), was used to accumulate these effective mutants. Among the mutants, Tfu_0875N249W/L163H/E217L exhibited the highest specific activity (320% of wild-type Tfu_0875), the greatest catalytic efficiency (kcat/KM = 1.00 min−1mM−1), the highest succinyl-CoA specificity (KM = 0.59 mM, 28.1% of Tfu_0875) and dramatically reduced substrate binding energy (−30.25 kcal mol−1v.s. −15.94 kcal mol−1). A structural comparison between Tfu_0875N249W/L163H/E217L and the wild type Tfu_0875 revealed that the increased interaction between the enzyme and succinyl-CoA was the primary reason for the enhanced enzyme activity. This interaction facilitated rapid substrate anchoring and stabilization. Furthermore, a reduced binding pocket volume improved substrate specificity by enhancing the complementarity between the binding pocket and the substrate in stereo conformation. Finally, our rationally designed mutant, Tfu_0875N249W/L163H/E217L, increased the adipic acid titer by 1.35-fold compared to the wild type Tfu_0875 in shake flask. The demonstrated enzymatic methods provide a promising enzyme variant for the adipic acid production. The above effective substrate binding pocket engineering strategy can be beneficial for the production of other industrially competitive biobased chemicals when be applied to other thiolases.

Mid-Long Chain Dicarboxylic Acid Production via Systems Metabolic Engineering: Progress and Prospects.

Mid-to-long-chain dicarboxylic acids (DCAi, i ≥ 6) are organic compounds in which two carboxylic acid functional groups are present at the terminal position of the carbon chain. These acids find important applications as structural components and intermediates across various industrial sectors, including organic compound synthesis, food production, pharmaceutical development, and agricultural manufacturing. However, conventional petroleum-based DCA production methods cause environmental pollution, making sustainable development challenging. Hence, the demand for eco-friendly processes and renewable raw materials for DCA production is rising. Owing to advances in systems metabolic engineering, new tools from systems biology, synthetic biology, and evolutionary engineering can now be used for the sustainable production of energy-dense biofuels. Here, we explore systems metabolic engineering strategies for DCA synthesis in various chassis via the conversion of different raw materials into mid-to-long-chain DCAs. Subsequently, we discuss the future challenges in this field and propose synthetic biology approaches for the efficient production and successful commercialization of these acids.

Overexpression of the DHA1 family, ChlH and ChlK, leads to enhanced dicarboxylic acids production in koji fungi, Aspergillus luchuensis mut. kawachii and Aspergillus oryzae

The white koji fungus Aspergillus luchuensis mut. kawachii secretes substantial amounts of citric acid through the expression of the citric acid exporter CexA, a member of the DHA1 family. In this study, we aimed to characterize 11 CexA homologs (Chl proteins) encoded in the genome of A.luchuensis mut. kawachii to identify novel transporters useful for organic acid production. We constructed overexpression strains of chl genes using a cexA disruptant of the A.luchuensis mut. kawachii as the host strain, which prevented excessive secretion of citric acid into the culture supernatant. Subsequently, we evaluated the effects of overexpression of chl on producing organic acids by analyzing the culture supernatant. All overexpression strains did not exhibit significant citric acid accumulation in the culture supernatant, indicating that Chl proteins are not responsible for citric acid export. Furthermore, the ChlH overexpression strain displayed an accumulation of 2-oxoglutaric and fumaric acids in the culture supernatant, while the ChlK overexpression strain exhibited the accumulation of 2-oxoglutaric, malic and succinic acids. Notably, the ChlH and ChlK overexpression led to a substantial increase in the production of 2-oxoglutaric acid, reaching approximately 25mM and 50mM, respectively. Furthermore, ChlH and ChlK overexpression also significantly increased the secretory production of dicarboxylic acids, including 2-oxoglutaric acid, in the yellow koji fungus, Aspergillus oryzae. Our study demonstrates that overexpression of DHA1 family gene results in enhanced secretion of organic acids in koji fungi of the genus Aspergillus.

Engineering of thioesterase YciA from Haemophilus influenzae for production of carboxylic acids

Acyl-CoA-thioesterases, which hydrolyze acyl-CoA-esters and thereby release the respective acid, have essential functions in cellular metabolism and have also been used to produce valuable compounds in biotechnological processes. Thioesterase YciA originating from Haemophilus influenzae has been previously used to produce specific dicarboxylic acids from CoA-bound intermediates of the ethylmalonyl CoA pathway (EMCP) in Methylorubrum extorquens. In order to identify variants of the YciA enzyme with the capability to hydrolyze so far inaccessible CoA-esters of the EMCP or with improved productivity, we engineered the substrate-binding region of the enzyme. Screening a small semi-rational mutant library directly in M.extorquens yielded the F35L variant which showed a drastic product level increase for mesaconic acid (6.4-fold) and 2-methylsuccinic acid (4.4-fold) compared to the unaltered YciA enzyme. Unexpectedly, in vitro enzyme assays using respective M.extorquens cell extracts or recombinantly produced thioesterases could not deliver congruent data, as the F35L variant showed strongly reduced activity in these experiments. However, applied in an Escherichia coli production strain, the protein variant again outperformed the wild-type enzyme by allowing threefold increased 3-hydroxybutyric acid product titers. Saturation mutagenesis of the codon for position 35 led to the identification of another highly efficient YciA variant and enabled structure-function interpretations. Our work describes an important module for dicarboxylic acid production with M. extorquens and can guide future thioesterase improvement approaches.Key points• Substitutions at position F35 of YciAHI changed the productivity of YciA-based release of carboxylic acid products in M. extorquens AM1 and E. coli.• YciAHI F35N and F35L are improved variants for dicarboxylic production of 2-methylsuccinic acid and mesaconic acid with M. extorquens AM1.• In vitro enzyme assays did not reveal superior properties of the optimized protein variants.

Recent Progress in Metabolic Engineering of Escherichia coli for the Production of Various C4 and C5-Dicarboxylic Acids.

As an alternative to petrochemical synthesis, well-established industrial microbes, such as Escherichia coli, are employed to produce a wide range of chemicals, including dicarboxylic acids (DCAs), which have significant potential in diverse areas including biodegradable polymers. The demand for biodegradable polymers has been steadily rising, prompting the development of efficient production pathways on four- (C4) and five-carbon (C5) DCAs derived from central carbon metabolism to meet the increased demand via the biosynthesis. In this context, E. coli is utilized to produce these DCAs through various metabolic engineering strategies, including the design or selection of metabolic pathways, pathway optimization, and enhancement of catalytic activity. This review aims to highlight the recent advancements in metabolic engineering techniques for the production of C4 and C5 DCAs in E. coli.

Role of aerosol liquid water content on the production of dicarboxylic acids in the dust-laden air masses over the Arabian Sea: Implications for heterogeneous chemistry

Oxalic acid and the related organics are ubiquitous water-soluble constituents of ambient organic aerosols (OA). Their molecular distributions and relative abundances provide crucial insights on the secondary OA formation processes in the marine atmosphere and are important for understanding the cloud-aerosol interactions. Here, we measured the concentrations of dicarboxylic acids, pyruvic acid, ω-oxocarboxylic acids and α-dicarbonyls alongside aerosol chemical composition in the South Asian outflow to the Arabian Sea. Oxalic acid (C2) was the most abundant dicarboxylic acid followed by succinic (C4) and malonic (C3) acids; this distribution is typical of “less aged OA”. Oxalic acid levels correlated well with aerosol liquid water content (ALWC) and non-sea-salt (nss)-SO42− (a tracer of coal combustion influence), suggesting an important aqueous phase oxidation of successive higher homologs. This was inferred based on the prevailing inverse relationships between the relative abundances of oxalic acid in total aliphatic dicarboxylic acids and those of malonic, succinic, glutaric, adipic, and azelaic acids. Likewise, the concentrations of glyoxal (Gly: a major compound emitted from vehicular exhaust) and glyoxylic acid (ωC2) correlated strongly with C4, nss-Ca2+ (dust tracer) and elemental carbon (EC: a combustion tracer from biomass/fossil-fuels). These observations suggest gas/particle partitioning and subsequent aqueous phase oxidation of Gly to ωC2 and then elongation (oligomerization) to succinic acid associated with the mineral dust particles. This means relative abundances of anthropogenic SO42− in the dust-laden air masses govern the secondary OA formation over the Arabian Sea.

Metabolic and Microbial Community Engineering for Four-Carbon Dicarboxylic Acid Production from CO2-Derived Glycogen in the Cyanobacterium Synechocystis sp. PCC6803.

The four-carbon (C4) dicarboxylic acids, fumarate, malate, and succinate, are the most valuable targets that must be exploited for CO2-based chemical production in the move to a sustainable low-carbon future. Cyanobacteria excrete high amounts of C4 dicarboxylic acids through glycogen fermentation in a dark anoxic environment. The enhancement of metabolic flux in the reductive TCA branch in the Cyanobacterium Synechocystis sp. PCC6803 is a key issue in the C4 dicarboxylic acid production. To improve metabolic flux through the anaplerotic pathway, we have created the recombinant strain PCCK, which expresses foreign ATP-forming phosphoenolpyruvate carboxykinase (PEPck) concurrent with intrinsic phosphoenolpyruvate carboxylase (Ppc) overexpression. Expression of PEPck concurrent with Ppc led to an increase in C4 dicarboxylic acids by autofermentation. Metabolome analysis revealed that PEPck contributed to an increase in carbon flux from hexose and pentose phosphates into the TCA reductive branch. To enhance the metabolic flux in the reductive TCA branch, we examined the effect of corn-steep liquor (CSL) as a nutritional supplement on C4 dicarboxylic acid production. Surprisingly, the addition of sterilized CSL enhanced the malate production in the PCCK strain. Thereafter, the malate and fumarate excreted by the PCCK strain are converted into succinate by the CSL-settling microorganisms. Finally, high-density cultivation of cells lacking the acetate kinase gene showed the highest production of malate and fumarate (3.2 and 2.4 g/L with sterilized CSL) and succinate (5.7 g/L with non-sterile CSL) after 72 h cultivation. The present microbial community engineering is useful for succinate production by one-pot fermentation under dark anoxic conditions.

Improvement of dicarboxylic acid production with Methylorubrum extorquens by reduction of product reuptake

The methylotrophic bacterium Methylorubrum extorquens AM1 has the potential to become a platform organism for methanol-driven biotechnology. Its ethylmalonyl-CoA pathway (EMCP) is essential during growth on C1 compounds and harbors several CoA-activated dicarboxylic acids. Those acids could serve as precursor molecules for various polymers. In the past, two dicarboxylic acid products, namely mesaconic acid and 2-methylsuccinic acid, were successfully produced with heterologous thioesterase YciA from Escherichia coli, but the yield was reduced by product reuptake. In our study, we conducted extensive research on the uptake mechanism of those dicarboxylic acid products. By using 2,2-difluorosuccinic acid as a selection agent, we isolated a dicarboxylic acid import mutant. Analysis of the genome of this strain revealed a deletion in gene dctA2, which probably encodes an acid transporter. By testing additional single, double, and triple deletions, we were able to rule out the involvement of the two other DctA transporter homologs and the ketoglutarate transporter KgtP. Uptake of 2-methylsuccinic acid was significantly reduced in dctA2 mutants, while the uptake of mesaconic acid was completely prevented. Moreover, we demonstrated M. extorquens-based synthesis of citramalic acid and a further 1.4-fold increase in product yield using a transport-deficient strain. This work represents an important step towards the development of robust M. extorquens AM1 production strains for dicarboxylic acids.Key points• 2,2-Difluorosuccinic acid is used to select for dicarboxylic acid uptake mutations.• Deletion of dctA2 leads to reduction of dicarboxylic acid uptake.• Transporter-deficient strains show improved production of citramalic acid.

A Review on the Production of C4 Platform Chemicals from Biochemical Conversion of Sugar Crop Processing Products and By-Products

The development and commercialization of sustainable chemicals from agricultural products and by-products is necessary for a circular economy built on renewable natural resources. Among the largest contributors to the final cost of a biomass conversion product is the cost of the initial biomass feedstock, representing a significant challenge in effective biomass utilization. Another major challenge is in identifying the correct products for development, which must be able to satisfy the need for both low-cost, drop-in fossil fuel replacements and novel, high-value fine chemicals (and/or commodity chemicals). Both challenges can be met by utilizing wastes or by-products from biomass processing, which have very limited starting cost, to yield platform chemicals. Specifically, sugar crop processing (e.g., sugarcane, sugar beet) is a mature industry that produces high volumes of by-products with significant potential for valorization. This review focuses specifically on the production of acetoin (3-hydroxybutanone), 2,3-butanediol, and C4 dicarboxylic (succinic, malic, and fumaric) acids with emphasis on biochemical conversion and targeted upgrading of sugar crop products/by-products. These C4 compounds are easily derived from fermentations and can be converted into many different final products, including food, fragrance, and cosmetic additives, as well as sustainable biofuels and other chemicals. State-of-the-art literature pertaining to optimization strategies for microbial conversion of sugar crop byproducts to C4 chemicals (e.g., bagasse, molasses) is reviewed, along with potential routes for upgrading and valorization. Directions and opportunities for future research and industrial biotechnology development are discussed.

Techno-economic assessment of a bioprocess for long-chain dicarboxylic acid production from vegetable oils: a case study for distillers corn oil

Techno-economic assessment of a bioprocess for long-chain dicarboxylic acid production from vegetable oils: a case study for distillers corn oil

Rational and evolutionary engineering of Saccharomyces cerevisiae for production of dicarboxylic acids from lignocellulosic biomass and exploring genetic mechanisms of the yeast tolerance to the biomass hydrolysate

BackgroundLignosulfonates are significant wood chemicals with a $700 million market, produced by sulfite pulping of wood. During the pulping process, spent sulfite liquor (SSL) is generated, which in addition to lignosulfonates contains hemicellulose-derived sugars—in case of hardwoods primarily the pentose sugar xylose. The pentoses are currently underutilized. If they could be converted into value-added chemicals, overall economic profitability of the process would increase. SSLs are typically very inhibitory to microorganisms, which presents a challenge for a biotechnological process. The aim of the present work was to develop a robust yeast strain able to convert xylose in SSL to carboxylic acids.ResultsThe industrial strain Ethanol Red of the yeast Saccharomyces cerevisiae was engineered for efficient utilization of xylose in a Eucalyptus globulus lignosulfonate stream at low pH using CRISPR/Cas genome editing and adaptive laboratory evolution. The engineered strain grew in synthetic medium with xylose as sole carbon source with maximum specific growth rate (µmax) of 0.28 1/h. Selected evolved strains utilized all carbon sources in the SSL at pH 3.5 and grew with µmax between 0.05 and 0.1 1/h depending on a nitrogen source supplement. Putative genetic determinants of the increased tolerance to the SSL were revealed by whole genome sequencing of the evolved strains. In particular, four top-candidate genes (SNG1, FIT3, FZF1 and CBP3) were identified along with other gene candidates with predicted important roles, based on the type and distribution of the mutations across different strains and especially the best performing ones. The developed strains were further engineered for production of dicarboxylic acids (succinic and malic acid) via overexpression of the reductive branch of the tricarboxylic acid cycle (TCA). The production strain produced 0.2 mol and 0.12 mol of malic acid and succinic acid, respectively, per mol of xylose present in the SSL.ConclusionsThe combined metabolic engineering and adaptive evolution approach provided a robust SSL-tolerant industrial strain that converts fermentable carbon content of the SSL feedstock into malic and succinic acids at low pH.in production yields reaching 0.1 mol and 0.065 mol per mol of total consumed carbon sources.. Moreover, our work suggests potential genetic background of the tolerance to the SSL stream pointing out potential gene targets for improving the tolerance to inhibitory industrial feedstocks.

Semi-rational evolution of pyruvate carboxylase from Rhizopus oryzae for elevated fumaric acid synthesis in Saccharomyces cerevisiae

Dicarboxylic acids are widely used in food, pharmaceutical, and chemical industries. Pyruvate carboxylase (PYC) plays a pivotal role in the production of dicarboxylic acids in microbial fermentation process. Our previous work showed that heterologous expression of pyruvate carboxylase (RoPYC) from Rhizopus oryzae resulted in an increase in fumaric acid titer to 226.0 ± 2.2 mg/L from 194.0 ± 4.0 mg/L in the S. cerevisiae pdc1adh1fum1 strain. However, PYC still remained the metabolic step limiting the production of target carboxylic acids. In this study, semi-rational evolution of pyruvate carboxylase by site-saturation mutagenesis combined with codon optimization was conducted to further improve fumaric acid synthesis. We demonstrated that each of three mutations (N315F, R485P and N1078F) or codon optimization of RoPYC significantly increased the production of fumaric acid. A maximal titer of 465.5 ± 6.5 mg/L was achieved in flasks by the strain expressing codon-optimized RoPYC mutant (R485P). Enzyme assays of these mutants showed higher PYC activities, while homology modeling indicated that the increased PYC activities could be attributed to the modulation of the allosteric domain and the biotin carboxylation domain. In addition, both calcium ion and carbon dioxide displayed positive effects on the fumaric acid production by this mutant. Overall, the strategy described here demonstrated an effective way for elevating PYC activity and further enhance the synthesis of dicarboxylic acids.

Metagenomic Analysis of Biochemical Passive Reactors During Acid Mine Drainage Bioremediation Reveals Key Co-selected Metabolic Functions.

Acid mine drainage (AMD) is the major pollutant generated by the mining industry, and it is characterized by low pH and high concentration of metals and sulfate. The use of biochemical passive reactors (BPRs) is a promising strategy for its bioremediation. To date, there are various studies describing the taxonomical composition of BPR microbial communities, generally consisting of an assemblage of sulfate-reducing organisms inside Deltaproteobacteria, and a diverse set of anaerobic (ligno)cellulolytic bacteria; however, insights about its functional metagenomic content are still scarce. In previous studies, a laboratory-scale AMD bioremediation using biochemical passive reactors was designed and performed, tracking operation parameters, chemical composition, and changes, together with taxonomic composition of the microbiomes harbored in these systems. In order to reveal the main functional content of these communities, we used shotgun metagenomics analyses to explore genes of higher relative frequencies and their inferred functions during the AMD bioremediation from three BPRs representing the main microbiome compositions detected in the system. Remarkably, genes encoding for two-component regulatory systems and ABC transporters related to metal and inorganic ions, cellulose degradation enzymes, dicarboxylic acid production, and sulfite reduction complex were all detected at increased frequency. Our results evidenced that higher taxonomic diversity of the microbiome was arising together with a functional redundancy of the specific metabolic roles, indicating its co-selection and suggesting that its enrichment on BPRs may be implicated in the cumulative efficiency of these systems.

Model-guided development of an evolutionarily stable yeast chassis.

First‐principle metabolic modelling holds potential for designing microbial chassis that are resilient against phenotype reversal due to adaptive mutations. Yet, the theory of model‐based chassis design has rarely been put to rigorous experimental test. Here, we report the development of Saccharomyces cerevisiae chassis strains for dicarboxylic acid production using genome‐scale metabolic modelling. The chassis strains, albeit geared for higher flux towards succinate, fumarate and malate, do not appreciably secrete these metabolites. As predicted by the model, introducing product‐specific TCA cycle disruptions resulted in the secretion of the corresponding acid. Adaptive laboratory evolution further improved production of succinate and fumarate, demonstrating the evolutionary robustness of the engineered cells. In the case of malate, multi‐omics analysis revealed a flux bypass at peroxisomal malate dehydrogenase that was missing in the yeast metabolic model. In all three cases, flux balance analysis integrating transcriptomics, proteomics and metabolomics data confirmed the flux re‐routing predicted by the model. Taken together, our modelling and experimental results have implications for the computer‐aided design of microbial cell factories.

High‐Performance BioNylons from Itaconic and Amino Acids with Pepsin Degradability

AbstractThe use of renewable feedstock for polymers has led to poor thermomechanical properties with high production costs. Herein, the production of novel chiral dicarboxylic acids derived from renewable itaconic and amino acids (d‐ or l‐leucine) is reported. In this study, rigid chiral heterocyclic dicarboxylic acid monomers are obtained with high purity from itaconic acid‐derived dimethyl itaconate as a starting material. Chirally interactive polyamides are prepared via melt polycondensation of hexamethylenediamine with heterocyclic diacid monomers. Further studies are conducted on d‐ or l‐leucine‐derived polyamides with homochirality that are fully amorphous. In contrast, the crystallization degree of the composite of d‐leucine‐derived polymer chains with l‐leucine‐derived chains increases to 36%, presumably due to enhanced interaction between polymer chains with different chiralities. The chirally‐interacting composite shows a glass transition temperature, Tg, of approximately 117 °C and a melting temperature, Tm, of approximately 213 °C, which are higher than those of conventional polyamides such as polyamide 11 (Tg of approximately 57 °C). The composite also shows high Young's moduli, E, and mechanical strengths σ, ranging from 2.2–3.8 GPa and 86–108 MPa, respectively. In addition, the polyamides show degradability with a digestive enzyme, pepsin.

Increasing Long-Chain Dicarboxylic Acid Production in Candida tropicalis by Engineering Fatty Transporters.

Candida tropicalis can metabolize alkanes or fatty acids to produce long-chain dicarboxylic acids (DCAs). Fatty acid transporters located on the cell or peroxisome membrane may play an important role in this process. Using amino acid sequence homologous alignment, two putative proteins, CtFat1p and CtPxa1p, located on the cell and peroxisome membrane were found, respectively. Moreover, single- and double-knockout homologous recombination technology was used to study ctfat1p and ctpxa1p gene effects on DCA synthesis. In comparison to the wild-type strain, long-chain DCA yield decreased by 65.14%, 88.38% and 56.19% after single and double-copy knockout of ctfat1p genes and double-copy knockout of ctpxa1p genes, respectively, indicating that the knockout of ctfat1p and ctpxa1p genes had a significant effect on the conversion of oils and fats into long-chain DCAs by C. tropicalis. However, the yield of long-chain DCAs increased by 21.90% after single-knockout of the ctpxa1p gene, indicating that the single-knockout of the ctpxa1p gene may reduce fatty acid transport to peroxisome for further oxidation. Moreover, to improve the intracellular transport rate of fatty acids, ctfat1p copy number increased, increasing DCA yield by 30.10%. These results may provide useful information for enhancing the production of long-chain DCAs by C. tropicalis.

Four-carbon dicarboxylic acid production through the reductive branch of the open cyanobacterial tricarboxylic acid cycle in Synechocystis sp. PCC 6803

Succinate, fumarate, and malate are valuable four-carbon (C4) dicarboxylic acids used for producing plastics and food additives. C4 dicarboxylic acid is biologically produced by heterotrophic organisms. However, current biological production requires organic carbon sources that compete with food uses. Herein, we report C4 dicarboxylic acid production from CO2 using metabolically engineered Synechocystis sp. PCC 6803. Overexpression of citH, encoding malate dehydrogenase (MDH), resulted in the enhanced production of succinate, fumarate, and malate. citH overexpression increased the reductive branch of the open cyanobacterial tricarboxylic acid (TCA) cycle flux. Furthermore, product stripping by medium exchanges increased the C4 dicarboxylic acid levels; product inhibition and acidification of the media were the limiting factors for succinate production. Our results demonstrate that MDH is a key regulator that activates the reductive branch of the open cyanobacterial TCA cycle. The study findings suggest that cyanobacteria can act as a biocatalyst for converting CO2 to carboxylic acids.

Identification of Enzymatic Bottlenecks for the Aerobic Production of Malate from Glycerol by the Systematic Gene Overexpression of Anaplerotic Enzymes in Escherichia coli.

The biotechnological production of dicarboxylic acids (C4) from renewable carbon sources represents an attractive approach for the provision of these valuable compounds by green chemistry means. Glycerol has become a waste product of the biodiesel industry that serves as a highly reduced carbon source for some microorganisms. Escherichia coli is capable of consuming glycerol to produce succinate under anaerobic fermentation, but with the deletion of some tricarboxylic acid (TCA) cycle genes, it is also able to produce succinate and malate in aerobiosis. In this study, we investigate possible rate-limiting enzymes by overexpressing the C-feeding anaplerotic enzymes Ppc, MaeA, MaeB, and Pck in a mutant that lacks the succinate dehydrogenase (Sdh) enzyme. The overexpression of the TCA enzyme Mdh and the activation of the glyoxylate shunt was also examined. Using this unbiased approach, we found that phosphoenol pyruvate carboxylase (Ppc) overexpression enhances an oxidative pathway that leads to increasing succinate, while phosphoenol pyruvate carboxykinase (Pck) favors a more efficient reductive branch that produces mainly malate, at 57.5% of the theoretical maximum molar yield. The optimization of the culture medium revealed the importance of bicarbonate and pH in the production of malate. An additional mutation of the ppc gene highlights its central role in growth and C4 production.

Chocolate industry side streams as a valuable feedstock for microbial long-chain dicarboxylic acid production

Two high-fat containing side streams from the chocolate industry were evaluated as an alternative renewable substrate for biochemical long-chain dicarboxylic acid (DCA) production by Candida tropicalis. Cleaning water from liquid chocolate transport and dissolved air flotation (DAF) sludge from the wastewater treatment plant contained 29 and 18 m% fat respectively. The addition of up to 100 g.L−1 of the ‘chocolate water’ and 80 % (v/v) of DAF sludge had no negative effects on both growth and DCA production. In a fed-batch reactor, a DCA concentration of 5.8 g.L−1 was obtained after 120 h and 47.5 % of the consumed fats were converted to DCA upon glucose addition when using chocolate water. Using DAF sludge, a DCA concentration of 4.9 g.L−1 was obtained after 72 h, equalling 37.5 % of the consumed fats. This research shows the potential of the researched side streams as a substrate for DCA production.