Ore Processing Research Articles

Mineral Liberation and Concentration Characteristics of Apatite Comminuted by High-Pressure GRU

Mineral liberation and concentration have always been the core issues in ore processing. The goal of multi-stage crushing and ball milling is liberation because mineral liberation is the foundation of beneficiation. High energy consumption and environmental pollution have always been unavoidable topics. We put forward the method of high-pressure gas rapid unloading (GRU). Particle size followed MR-R distribution. The scanning electron microscopy data showed that the liberation of apatite particles smaller than 4 mm was sufficient by high-pressure GRU methods, and high-grade apatite concentrated in the particle size range of 0.5 to 4 mm. The average grade of the preferred particle size interval was 3%–5% higher than the original ore. Liberation degrees of apatite less than 4 mm are above 88%, which was beneficial for mineral processing. Compared to the traditional crushing method, the GRU method had a higher liberation and concentration in the particle size range of 0.5 to 4 mm. The total energy consumption was about 1.76 kW·h/t, less than that of the traditional crushing method.

Recent Advances in Indium Recovery

Though indium has been removed from the fifth list (2023) of critical raw materials for the European Union list of critical metals, its recovery is still of paramount importance due to its wide use in a series of high-tech industries. As its recovery is closely associated with zinc mining, the recycling of In-bearing wastes is also of interest, for both profitable and environmental reasons. With unit operations (in hydrometallurgy and pyrometallurgy or extractive metallurgy) playing a key role in the recycling of indium, the present work reviewed the most recent innovations (2024) regarding the use of these operations in the recovery from this valuable metal from different solid or liquid wastes.

Reply to Hosseini Monjezi et al. Comment on “Zhou et al. Adsorption Behaviors of Lanthanum (III) and Yttrium (III) Ions on Gibbsite. Minerals 2023, 13, 1530”

The interaction between aluminum (hydr)oxides and inorganic substances has received widespread attention in the fields of ore deposit geochemistry, mineral processing, and environmental protection [...]

Fractal Analysis of Mining Wastewater Time Series Parameters: Balkhash Urban Region and Sayak Ore District

The population life and health quality are significantly reduced due to water resources pollution caused by heavy metals, especially in urban agglomerations located close to metal ore mining and processing facilities. The greatest environmental pollution occurs during the extraction of Cu, Zn, and Pb. In this study, a fractal R/S analysis of wastewater discharge indicators time series from a metal ore mining facility located in the Sayak ore district in the Republic of Kazakhstan (turbidity, electrical conductivity, flow magnitude, and pH level) was carried out. A sharp increase in the flow rate was recorded from 10 to 15 July 2024 and an increase in the electrical conductivity from 4 to 26 July 2024. However, the latest type of indicator assessment does not exceed the critical level for life. The presence of electrical conductivity indicators time series long-term memory and persistence was also recorded (the Hurst exponent for the electrical conductivity time series is fixed in the 0.56 to 0.59 range and does not go below the threshold value for randomness according to the Anis-Lloyd formula). Thus, the value-changing process is controlled and stable, and minor changes in turbidity indicate that these releases do not significantly harm the environment. Despite this, the results obtained do not allow for a comprehensive analysis of the state of releases as the data from all deposits is not available. Therefore, due to the time constraints of the data provided for analysis, it is difficult to fully assess the impact of specific metal ore mining facilities on the environmental safety of the Balkhash urban region. In addition, many studies indicate very high risks of chronic diseases for the population living in this region. The findings of this study enable us to conclude that the application of fractal analysis and the calculation of fractal characteristics for time series of emissions can serve as an indicator of the environmental status within the given area. This information can be used by environmental services to build reliable environmental pollution monitoring systems.

Assessment of Metal Enrichment in the Koma Bangou (Niger) Gold Panning Area Soils and Tailings

Artisanal and small-scale gold mining at Koma Bangou (Niger) has been going on since the Sahelian 1984’s drought, with introduction of ore leaching in the year 2009. The use of chemicals in the ore processing results in metal enrichment and pollution at the cyanidation sites. The aim of this work is to assess the metal enrichment of soils and tailings at Koma Bangou. Geochemical data acquired with portable XRF analyzer corrected with ICP-MS data, were used to assess the enrichment level of As, Cr, Cu, Mn, Pb and Zn in the soils and tailings samples using the enrichment factor and soil-geochemical baseline data for the Koma Bangou soils. The metallic enrichment generated by the ore processing was identified in the tailings (cyanidation and acidification waste) and the soils from the cyanidation areas. The perimeter soils (soils outside cyanidation sites) show no metal enrichment. Pb and As are extremely high to very high enriched in the cyanidation waste, with an average enrichment factor value of 44.96 and 34.96 respectively. Zn, Cu, Cr are extremely high to significant enriched in the acidification waste, with an average enrichment factor value of 793.35, 29.46 and 5.22 respectively. Mn enrichment is insignificant in all of the samples with an average enrichment factor value of 1.00 in the perimeter soils. The gold ore leaching activities generate metallic pollution of the soil, water and vegetation around the cyanidation sites.

Investigation of the effect of mineral composition and size on particle separation in Wet low and high intensities magnetic separators: An industrial case

Magnetic separation is used in ore processing to separate the minerals according to their magnetic susceptibility. Particle size also plays a role in the separation although few industrial results are presented in the literature to discuss this matter. Results from sampling industrial Wet Low Intensity Magnetic Separators (WLIMS) and Wet High Intensity Magnetic Separators (WHIMS) for processing an iron ore show that except for the strongly paramagnetic magnetite (Fe3O4), the recovery of minerals decreases with increasing particle size for both WLIMS and WHIMS. The examination of polished sections of the coarse size fractions from the reject streams of the WHIMS does not provide ground to suspect liberation to be responsible for the reduced recovery of coarse particles. Results also show that it is difficult to establish clear relationships between the mineral recoveries and their reported magnetic susceptibilities for WLIMS while for WHIMS a weak trend is observable.

High-temperature thermochemical conversion of iron ore tailings into diopside and akermanite-based composite materials

Iron ore tailings (IOTs), the residue materials generated during iron ore processing, pose environmental challenges due to their massive volume and potential impact on ecosystems. This study proposes a sustainable approach to manage and utilize this solid waste by converting it into value-added composite materials through high-temperature thermochemical reactions. Experiments are conducted in a tubular reactor at various reaction temperatures and times, and the resulting product samples are comprehensively characterized to elucidate their chemical compositional, physical, microstructural, thermal, and electrical properties. The results reveal that at optimal reaction temperatures (1230–1260 °C) and reaction times (20–120 min), the synthesized product is predominantly composed of diopside (CaMgSi2O6) and akermanite (Ca2MgSi2O7). Additionally, we demonstrate that the product can be diopside-rich or akermanite-rich when blending silica and MgO powders into the IOTs to control the starting material composition, opening a promising avenue for large-scale sustainable utilization of industrial solid waste.

Seasonal assessment of biomarkers in Channa punctata from Tampara Lake, Odisha, India and toxicity of thorium nitrate on fish

Tampara Lake, a freshwater lake in the Chatrapur beach placer deposits of Ganjam, Odisha, India is a well-known tourist attraction. Multiple factors seem to disturb the aquatic life of Tampara Lake, especially fish. Chatrapur beach placers are rich in various heavy minerals including monazite, an ore of thorium, that emits high background radiations and can affect the biota. Run-offs from the monazite mining sites on the beach placers are also presumed to be carried to the lake. Thus, tourism, local transportation, fishing activities, presence of heavy minerals and mining run-offs appear to disrupt the lake's ecosystem. The present work assessed the protein and lipid concentrations in the liver and muscle, nuclear abnormalities in the peripheral blood erythrocytes and histopathology of gills, liver, kidney, intestine and stomach of Channa punctata from Tampara Lake in summer, winter and rainy seasons. The study also documented the effects of thorium nitrate, a byproduct of monazite ore processing, on Channa punctata of non-monazite areas. Channa punctata from the Tampara lake had significantly lower protein and lipid content in the liver and muscle, nuclear deformities and micronuclei in the erythrocytes and deformities in the gill, kidney, liver, stomach and intestine relative to the fish from the non-monazite areas. Seasonal alterations were observed in the protein and lipid content of muscle and liver, gill and kidney structure. Fish from the non-monazite areas treated with sub-lethal concentrations of thorium nitrate showed a dose-dependent response in the protein and lipid content of liver and muscle, erythrocyte nuclear abnormalities and histopathological aberrations. The present study provides evidence that Channa punctata from Tampara Lake have relatively low nutritional value compared to fish from undisturbed non-monazite areas and are probably distressed by the water contamination due to the presence of heavy minerals and anthropogenic interventions.

Study on heat storage characteristics and carbon optimisation in the sintering process

In response to the phenomenon of automatic heat storage during the sintering process of iron ore, heat balance analysis concerning the main chemical reactions and physical heat carried by gas and solid materials was conducted. A unit heat storage model for the sintering process was established. Further, a mathematical model to solve the heat transfer characteristics between different sintering layer units was proposed and established based on temperature–time curves of the gas and solid phases. Using these models, the heat storage of each layer unit was calculated under the condition of uniform carbon allocation. Subsequently, the optimisation of carbon allocation at each layer unit for maximising the utilisation of heat storage was investigated. The heat required for sintering by the layer unit was taken as the constraint, and the maximum utilisation of heat stored in each layer unit was taken as the goal to optimise the carbon allocation in the height direction. The calculation results show that as the unit thickness is 100 mm and the total thickness of the layer is 600 mm, the heat transfer ratio of the upper unit to the lower unit is 34.22%, 30.29%, 14.74%, 9.49%, and 1.17%, respectively. The heat storage and available heat storage rate increase with the increase of layer height, with heat storage ranging from 0.69 × 104 to 5.14 × 104 KJ/t and heat storage rate ranging from 11.63% to 49.37%. After optimising carbon allocation, the unit achieved a maximum carbon reduction of 60.04%, resulting in an overall reduction in carbon allocation of 46.20%. This adjustment aligns more closely with the industrial processes.

The first results of the study of large diamonds from industrial deposits of Yakutia

A representative amount of diamonds larger than 10,8 carats extracted from deposits of Yakutia during the separate ore processing of each kimberlite pipe has been studied for the first time. It is shown that according to such typomorphic characteristics of a diamond as habitus, nitrogen content and aggregation, hydrogen concentration in a diamond, it is possible to carry out a preliminary evaluation of the deposit to predict the presence of large and giant diamonds. It has been established that large diamonds from the deposits of the Daldyn-Alakitsky area have a wide variations of nitrogen impurity and its aggregations in comparison with diamonds from the Malobotuobinsky, Srednemarkhinsky areas. It is determined that the content of large diamonds in the pipes of Yakutia is inversely proportional to the number of rounded dodecahedroids. The most promising deposits for finding of large diamonds are those in which the majority of diamonds belong to one population – average nitrogen low-aggregated diamonds that were formed at a temperature of ~1100оC. According to the study of geological collections of diamonds, it is shown that in kimberlite pipes with an increased nitrogen content in diamonds, a raising in the proportion of large diamonds in the deposit is noted. On the contrary, according to the aggregation of nitrogen in diamonds, as a parameter of the post-growth history, there is a negative correlation with the content of large diamonds. Increased value concentrations of hydrogen in diamonds not only negatively affect the total diamond content of the deposit, but also generally control the decrease in the content of large diamonds.

Evaluation of the Mechanical Behavior of Asphaltic Mixtures Utilizing Waste of the Processing of Iron Ore

Mineral extraction is an important operation for the economy of different countries and generates millions of tons of mining waste. In this context, and in association with the high demand for paving aggregates and the lack of raw materials for this purpose, the feasibility of using iron ore processing waste has emerged as a promising alternative. This study evaluates the physical and mechanical behavior of asphalt mixtures incorporating waste from the company Samarco S.A., collected in Mariana-MG, to replace the fine aggregate in asphalt concrete mixtures, with a view to applications in the bearing layer of local traffic roads. Two mixtures, M2 and M3, containing 20% and 17% waste, respectively, were formulated and analyzed, compared to a reference mixture, M1. Evaluations were carried out using the Marshall method parameters, mechanical tests of resilience modulus, and fatigue life under controlled tension, as well as mechanistic analysis. Brazilian mechanistic–empirical design software (MeDiNa—v 1.5.0) contributed to this analysis. This analysis revealed that, for a traffic level of N = 5 × 106 (average traffic) on a local road, pavements containing the M1 and M3 mixtures had the same layer thicknesses (6.9 cm), as well as the same fatigue class, equal to 1. The pavement with the M2 mixture had the thickest asphalt layer (8.2 cm) and a lower fatigue class equal to 0. But if compared in terms of the percentage of cracked area over 10 years, it still offers ideal performance conditions compared to the M1 and M3 mixes. Thus, it can be considered feasible to replace fine aggregate with iron ore waste in asphalt concrete for use on local roads in the region without altering the bearing capacity of the pavement.

Rational parameters of drilling and blasting works providing the least costs of ore mining and processing

Отгрузка разрушенной горной массы требуемого качества и количества на обогатительную фабрику является одной из основных задач подготовительных работ при добыче полезных ископаемых. Основным способом регулирования этого процесса является оптимизация параметров и технологий ведения буровзрывных работ. На Актогайском месторождении возникла проблема с увеличением крепости добываемой руды по мере углубления карьера, что сильно влияет на производительность обогатительной фабрики. В статье приведен опыт проведения мероприятий по оптимизации БВР для улучшения работы обогатительной фабрики, а точнее стабилизации процесса первичного дробления руды. В статье приведены методы расчета рациональных параметров и результатов БВР. Проведен расчет рациональных параметров БВР, а также расчет гранулометрического состава взорванных пород при рациональных параметрах и при предложенных для экспериментальных взрывов Қажетті сападағы және көлемдегі бұзылған тау жынысын байыту фабрикасына жөнелту пайдалы қазбаларды өндіруге дайындық жұмыстарындағы негізгі міндеттердің бірі болып табылады. Бұл процесті реттеудің негізгі әдісі бұрғылау-жару жұмыстарының параметрлері мен технологияларын оңтайландыру болып табылады. Ақтоғай кен орнында карьердің тереңдеуімен өндірілетін кеннің беріктігінің артуы проблемасы туындады, бұл байыту фабрикасының өнімділігіне айтарлықтай әсер етеді. Мақалада байыту фабрикасының жұмысын жақсарту, дәлірек айтқанда, кенді бастапқы ұсақтау процесін тұрақтандыру мақсатында бұрғылау-жару жұмыстарын оңтайландыру шараларын өткізу тәжірибесі баяндалған. Мақалада бұрғылау-жару жұмыстарының ұтымды параметрлерін есептеу әдістері және нәтижелері келтірілген. Бұдан басқа, ұтымды параметрлерге және эксперименттік жарылыстар үшін ұсынылған параметрлерге сәйкес жарылған жыныстардың гранулометриялық құрамын есептеу жүргізілді One of the main tasks of preparatory work in mineral extraction is the delivery of the required quality and quantity of broken rock mass to the processing plant. The primary method of regulating this process is optimizing the parameters and technologies of drilling and blasting operations. At the Aktogay deposit, a problem has arisen with the increasing hardness of the mined ore as the pit deepens, significantly affecting the performance of the processing plant. The article presents the experience of implementing measures to optimize drilling and blasting operations to improve the performance of the processing plant, specifically to stabilize the primary ore crushing process. The article provides methods for calculating rational parameters and results of drilling and blasting operations. Calculations were made for the rational parameters of drilling and blasting operations, as well as for the granulometric composition of blasted rock under rational parameters and those proposed for experimental blasts

Central-Eastern Europe as a centre of Middle Ages extractive metallurgy

Central-eastern to southeastern Europe, from Bohemia to Greece is home to some of the richest ore deposits on earth, with archaeological evidence suggesting a long history of metal use. However, the exact timing and extent of past metal processing activities remains unclear. The Middle Ages and Early Modern period (c. 500–1800 common era (CE)) in Europe, saw the expansion of metal use at an unprecedented scale, continent-wide. Here we analysed rates of past atmospheric lead (Pb) deposition in six peat bogs from Romania, Serbia and Greece. We show that after 1000 CE, the redevelopment of central European mining industry was synchronous with Pb pollution in southeastern Europe, with the onset of metal pollution occurring in the area prior to central Europe. Therefore, southeastern Europe may have led regional mining developments, with technological advances rapidly shifting from east to west through the Middle Ages. This indicates how southeastern Europe should be included in future discussions of Middle Age metallurgy not simply as a contributor, but at times as a leader in metal production.

Examining Complexities of Artisanal and Small-Scale Gold Mining on Buru Island, Maluku Province, Indonesia

The Artisanal and Small-scale Gold Mining (ASGM) sector is presently one of the largest global sources of anthropogenic mercury emissions. The risk of mercury pollution from ASGM in Indonesia challenges other important industries including fisheries and tourism. Environmental degradation and risks to food safety and human health are major concerns that have been realised at local scales, including on Buru Island, Indonesia. Since the discovery of gold on Buru Island in 2011 the community has undergone dramatic changes. Some of these, such as rapid wealth accumulation, have been of benefit to people involved in the industry, however, they have been marred by negative social and economic consequences including rapid inflation, reduced rice production, and changes to the social fabric. We explore the Buru Island example through over 12 years of research interest and using empirical material through a socio-legal lens. Various legislative changes and government interventions have occurred since 2011 and there are complex interactions between industry players. Currently, the mining is low key with ore being transported to ‘back yard’ processing operations while a permitting system is anticipated. There is a legacy of land degradation and contamination as a result of the mining and ore processing. Alternatives to mercury are being considered but are challenged by uncertainty about product effectiveness, potential toxicity, and a lack of processing knowledge.

Environmentally sound geotechnologies for leaching metals from polymetallic ore processing wastes and wastewater

Global challenges (increased consumption of georesources, climatic changes, limited reserves) increase the relevance of the problems of growing waste accumulation and environmentally-sound modernization of mineral extraction. In this regard, the existing approaches to the design of geotechnologies for metal mining need to be improved based on a concept of so-called circulation waste management and ecologization of technological processes. The paper is devoted to the issue of formation of conceptual bases and directions of ecologization of geotechnologies at leaching metals from polymetallic ore processing wastes and wastewater. The study presents recommendations for improving in-situ leaching of ores in blocks, allowing to determine the optimal conditions for increasing the completeness of subsoil use and reducing environmental damage. It was revealed that at metal extraction with solution circulation through brine chambers the content of Na, Cl, SO4 and Ca ions in dialysate was low, while without circulation through brine, it significantly exceeded corresponding MPCs. This proves the fundamental feasibility of controlling natural leaching processes by enhancing the oxidizing potential of natural solvents through the addition of industrial oxidizing agents. It was found that increasing the duration of agitation leaching (both with and without mechanoactivation) leads to a uniform expansion of the local maximums of Pb yield from the pulp when the minimum NaCl concentration decreases from 11–12 to 7% at H2SO4 concentration of 0.6%. One of key results of the study is justifying the expansion of the use of disintegrators to realize targeted activation of tailings. The practical significance of the obtained results lies in the proved feasibility of optimizing the flow sheet of electrochemical extraction of metals from wastewater on the basis of the obtained regularities of the use of brine circulation through brine chambers. In addition, the totality of the obtained results of using a disintegrator for reextraction of lead from geomaterials will allow developing a methodology for calculating the parameters of mechanoactivation action to increase the degree of metal recovery from the tailings of North Ossetia-Alania’s (Zgidskoe, Sadonskoe, Arkhonskoe deposits) polymetallic ores beneficiation. The most promising way for further research is to substantiate methods of using underground space for complete removal of wastes (wastewater and tailings) after their multistage treatment.

A Hybrid Method for Identifying Critical Failure Modes in a Ball Mill

The reliability of a ball mill is crucial for the seamless operation of ore processing and other industrial plants, where unexpected equipment failure or downtime can result in significant financial losses and reduced production efficiency. Thus, this paper examined a hybrid method for identifying critical failure modes in a ball mill using the Failure Modes, Effects, and Criticality Analysis combined with the Complex Proportional Assessment with Grey Numbers (COPRAS-G). The COPRAS-G method was employed to assess the criticality of various failure modes by determining the weights of significant failure modes in the bearing, gearbox, motor, and shaft components of a ball mill. It was observed that gear seal failure is the most critical failure with percentage contribution (Ni) of 100%, while bearing wear is the least critical failure with percentage contribution (Ni) of 62%. The result suggests that failure modes of gear seal failure, gear pitting, motor bearing fatigue, and shaft fracture are regarded as the main contributors to failure with percentage contribution (Ni) of 100%, 97%, 87% and 83% respectively. Current ball mill maintenance includes corrective, preventive and predictive maintenance. For failure modes with high criticality, predictive maintenance was advised, while for moderate and low criticality, corrective and preventive maintenance were advised.

Stay with the green: New insights into ancient copper smelting in the Tonglüshan site, China

This paper presents new archaeometallurgical analyses from the Tonglüshan site, a famous ancient mining and smelting site in China. Results show that the primary phases in slag samples from two sites (Sifangtang and Lujia’nao) are all of a vitreous matrix, interspersed with fayalite crystals, wüstite, and hercynite. The trapped metallic particles in the slag are mainly raw copper with few sulfides present, which indicates a direct reduction process of oxidic ore. Iron-rich minerals were likely to be added as flux implied by the few unreacted inclusions in the slag samples. The extremely low copper content in the slag samples demonstrates a high rate of copper recovery, indicating that the copper smelting technology in the region had reached a considerably advanced level. In the meantime, the variations in metal content in slag samples from different periods reveal the diachronic changes in this copper smelting technology. The Tonglüshan site, with its millennia of ancient mining and metallurgical activities, provides an excellent material base for detailed studies on technological evolution.

Ionic Liquids and its Potential as a New Green Solvent for REE Extraction in Philippine Bauxite Residues

Abstract Rare earth elements (REEs) have become necessary for high-technology applications. This has prompted an increase in demand for REE exploration, production, and extraction. Despite its name, REEs are fairly rich in the Earth’s crust. REEs are estimated to have a crustal abundance of 9.2 ppm relative to other elements in our crust. In the Philippines, deposits are found to give adequately high concentrations of REE, ranging from approximately 200 ppm to 600 ppm. Samar bauxite deposits especially had around 500 ppm REE. In line with the planned bauxite production in the Philippines, it is of interest to further uncover ways to maximize its recovery. One of the possible optimizations in its extraction is to utilize its residue. There have been a number of methods to extract REE in bauxite residues. The use of ionic liquids (IL) to recover REE in bauxite offers a possibility of an effective and environmentally safe recovery process. ILs are molten salts that have melting points below 100degC. They exhibit high electrochemical stability, non-flammability, non-volatility, and can be tailored to the desired application. Hence, they have been the topic of study for different research regarding REE extraction in bauxite residues. Herein, the potential of ILs as a green solvent for REE extraction in bauxite is reviewed for future use in the extractive metallurgy of bauxites in the Philippines.

HPAL of a lateritic nickel ore: An investigation on the relationship between nickel and cobalt extraction and acid consumption

Nickel and cobalt raw materials have become essential in industries like batteries such as robotics, and drones, which are considered as future technologies due to their expanding applications and diversity. Research towards the development of environmentally friendly and relatively low-cost alternative methods for extracting nickel, particularly from low-grade deposits, is becoming increasingly crucial. Laterite ores processing is plagued by high reagent consumption and scale formation. This study focused on investigating the relationship between Ni and Co extraction and acid consumption in the high-pressure acid leaching of lateritic ore, as well as the characterization of leach residue. Analysis has shown that the lateritic ore contains 1.05 % Ni, 0.05 % Co and 21.94 % Fe. In the acid leaching tests based upon a Box-Behnken Design, the initial acid concentration and leach time have a beneficial effect on the Ni extraction (70–94 %). Cobalt extractions ranged between 93 % and 96 %. To facilitate Fe dissolution and increase Ni extraction, cuprous ions were added into the leach solution. Moderate level copper addition (0.025 M) resulted in a significant improvement in Ni extraction, whereas high levels of cuprous addition (0.050 M) did not have further benefit. It has been noted that adding cuprous ions significantly reduces the amount of scale that forms in the autoclave. The lowest Ni extraction was obtained under two different test conditions that did not include copper ions. Increased acid addition was correlated with the increase in Ni leaching and decreased Fe content in residue. There will exist an optimal situation where the acid addition is enough to enhance Ni dissolution and the Eh condition, leading to minimal dissolved Fe.

INNOVATIVE METHODS FOR PROCESSING COPPER ORES IN KAZAKHSTAN: A COMPREHENSIVE APPROACH TO ENHANCING THE EFFICIENCY OF VALUABLE COMPONENT EXTRACTION

This article presents an innovative approach to processing copper ore from one of the deposits in Kazakhstan, aimed at enhancing the efficiency of copper extraction from materials with a complex mineral composition. The described methodology includes several key stages: comprehensive analysis of the ore's material composition, gravity and flotation beneficiation, as well as hydrometallurgical processes. During the study, the ores underwent preliminary preparation, including crushing and grinding to the required fineness. Experiments on gravity and flotation beneficiation demonstrated that optimizing the parameters of these processes significantly increases the yield of copper concentrate. Additionally, sulfuric acid leaching conducted showed high efficiency in extracting copper from the ground ore. The research results confirm that a comprehensive approach to copper ore processing ensures high efficiency in extracting valuable components and opens up prospects for the sustainable and economically viable utilization of complex copper ores