Fixation Procedures Research Articles

Laparoscopic Pectopexy versus Vaginal Sacrospinous Ligament Fixation in the Treatment of Apical Prolapse.

To compare the follow-up results of a sacrospinous ligament fixation (SSLF) technique for laparoscopic bilateral fixation of the vagina to the iliopectineal ligament via a PVDF-mesh (laparoscopic pectopexy technique, LP) in terms of cure rate and postoperative complications rate. This prospective study included 160 patients diagnosed with pelvic organ prolapse stage II-IV according to the POP-Q system. Eighty-two patients (51.25%) underwent vaginal sacrospinous ligament fixation and seventy-eight patients (48.75%) underwent the laparoscopic pectopexy procedure. The cure rate was high in both groups, 95.12% of the patients (78 out of 82) in the SSLF group and 93.59% of the patients (73 out of 78) in the LP group were cured post surgery, leading to an overall cure rate of 151 out of 160 patients. Pelvic pain was present in 5.00% of all patients, but was notably more frequent in the SSLF group (7, 8.54%) than in the LP group (1, 1.28%). Dyspareunia occurred in 4.37% of all patients, slightly more frequently in the SSLF group (6, 7.32%) than the LP group (1, 1.28%), but without significant difference. The laparoscopic pectopexy procedure has comparably positive follow-up results with the conventional sacrospinous ligament fixation procedure. Both SSLF and LP are effective in the treatment of pelvic organ prolapse, with favorable anatomical and subjective results, a high cure rate and low rates of serious postoperative complications.

Video-assisted thoracoscopic surgery for Andersson lesion in ankylosing spondylitis: A case report and literature review.

Andersson lesion (AL), a phenomenon initially described by Andersson nearly 80 years ago, has been the subject of extensive research and various treatment modalities. The ongoing debate surrounding the need for anterior surgery in AL cases has spurred numerous proposed approaches. Despite the demonstrated efficacy of anterior surgery in achieving fusion and stabilization, its implementation is associated with prolonged operation time and heightened intraoperative bleeding. A 32-year-old male patient presented at our hospital in February 2019 with a 2-month history of bilateral lower extremity weakness and sensory disturbances. These symptoms were exacerbated by a recent fall. AL conbined with ankylosing spondylitis. A 1-stage posterior fixation and decompression procedure was performed to ensure spinal stability, minimize deformities, and reduce surgical trauma. To achieve these goals, a 2-stage approach was employed, which included video-assisted thoracoscope-guided vertebrectomy, spinal canal decompression, and bone graft fusion. No recurrences of significant pain, limb numbness, or other symptoms were reported, ultimately leading to an improved quality of life for the patient. We utilized video-assisted thoracoscopic surgery technology for anterior bone graft fusion in a patient with AL to minimize the trauma of secondary surgery. However, the 3-year follow-up showed insufficient bony fusion at the fracture site. Nevertheless, the patient maintained spinal stability with posterior internal fixation and no significant kyphosis or symptoms. Thus, standalone posterior fixation may suffice for favorable clinical outcomes in patients with AL.

A clinical prediction model for predicting the surgical site infection after an open reduction and internal fixation procedure considering the NHSN/SIR risk model: a multicenter case-control study.

Surgical site infection (SSI) is one of the most common surgical-related complications worldwide, particularly in developing countries. SSI is responsible for mortality, long hospitalization period, and a high economic burden. This hospital-based case-control study was conducted in six educational hospitals in Tehran, Iran. A total of 244 patients at the age of 18-85 years who had undergone open reduction and internal fixation (ORIF) surgery were included in this study. Among the 244 patients, 122 patients who developed SSIs were selected to be compared with 122 non-infected patients used as controls. At the second stage, all patients (n = 350) who underwent ORIF surgery in a hospital were selected for an estimation of the standardized infection ratio (SIR). A logistic regression model was used for predicting the most important factors associated with the occurrence of SSIs. Finally, the performance of the ORIF prediction model was evaluated using discrimination and calibration indices. Data were analyzed using R.3.6.2 and STATA.14 software. Klebsiella (14.75%) was the most frequently detected bacterium in SSIs following ORIF surgery. The results revealed that the most important factors associated with SSI following an ORIF procedure were found to be elder age, elective surgery, prolonged operation time, American Society of Anesthesiologists score of ≥2, class 3 and 4 wound, and preoperative blood glucose levels of >200 mg/dl; while preoperative higher hemoglobin level (g/dl) was found to be a protective factor. The evidence for the interaction effect between age and gender, body mass index and gender, and age and elective surgery were also observed. After assessing the internal validity of the model, the overall performance of the models was found to be good with an area under the curve of 95%. The SIR of SSI for ORIF surgery in the selected hospital was 0.66 among the patients aged 18-85 years old. New risk prediction models can help in detecting high-risk patients and monitoring the infection rate in hospitals based on their infection prevention and control programs. Physicians using prediction models can identify high-risk patients with these factors prior to ORIF procedure.

Transverse subtrochanteric shortening osteotomy with double tension-band fixation during THA for Crowe III-IV developmental dysplasia: 12-year outcomes

BackgroundWhen performing total hip arthroplasty in patients with severe developmental dysplasia, shortening the femur facilitates reduction while also preventing sciatic or crural nerve injury and excessive length of the operated limb. No consensus exists about the optimal type of implant and best internal fixation procedure, two parameters that directly govern the risk of the most common intraoperative and postoperative complications (diaphyseal fractures, dislocation, non-union). To minimise these risks, we developed a technique combining a transverse subtrochanteric shortening osteotomy, a long ovoid-profiled, cementless stem anchored in the metaphysis, and double tension-band wiring for internal fixation. The primary objective of this study was to evaluate the outcomes of this technique with emphasis on (i) complications and femoral implant survival, (ii) clinical outcomes (functional scores and lower-limb length inequality [LLLI]), and time to healing. HypothesisOur technique is associated with low rates of intraoperative and postoperative complications. Material and methodsThis single-centre retrospective cohort study included patients who underwent THA with a transverse subtrochanteric shortening osteotomy and fixation using double tension-band wiring to treat severe (Crowe III or IV) developmental hip dysplasia. The femoral implant was a long, ovoid, cementless stem fully coated with hydroxyapatite. We collected the intraoperative and postoperative complications, survival, LLLI, functional scores (Harris Hip Score [HHS] and Forgotten Joint Score [FJS]), patient satisfaction, and radiographic outcomes. ResultsThe study included 31 hips in 25 patients. Two patients (2/31 hips, 6.5%) were lost to follow-up, leaving 29 hips for the analysis of postoperative outcomes. Mean follow-up was 13.7±4.2 years (range, 5.8–18.3 years). The four intraoperative complications (4/31, 12.9%) consisted fracture of the diaphysis (2/31, 6.5%), fracture of the greater trochanter (1/31, 3.2%), and sciatic nerve injury followed by a full recovery (1/29, 3.4%). The 8 (8/29, 27.5%) postoperative complications consisted of dislocation (2/29, 6.9%), stem subsidence (2/29, 6.9%), and non-union (4/29, 13.8%). Femoral implant survival at last follow-up was 87.1% (95% CI, 76.1–99.7). The mean HHS increased from 39.6±12.0 (range, 14–61) before surgery to 81.7±13.2 (range, 48–100) at last follow-up (p<0.01). The FJS at last follow-up indicated that the joint was forgotten in 14/29 (48.2%) cases and caused only acceptable symptoms in 9/29 (31.0%) of cases. Clinically significant (≥ 1cm) LLLI was present in 8/29 (27.6%) patients postoperatively compared to 19/29 (65.5%) preoperatively. The mean LLLI decreased from 20.8±19.7mm (range, 0–60mm) to 5.0±7.3mm (range, 0–30mm). Mean time to healing was 4.3±2.4 months (range, 2–11 months). ConclusionRegarding these complex procedures, this technique was associated with low rates of intraoperative fractures and early postoperative complications. However, femoral stem survival was shorter than in earlier studies and the non-union rate was high, despite satisfactory functional and clinical outcomes.Level of evidence IV.

Improving pedicle screw path planning by vertebral posture estimation

Objective. Robot-assisted pedicle screw placement in spinal surgery can reduce the complications associated with the screw placement and reduce the hospital return counts due to malfunctions. However, it requires accurate planning for a high-quality procedure. The state-of-the-art technologies reported in the literature either ignore the anatomical variations across vertebrae or require substantial human interactions. We present an improved approach that achieves pedicle screw path planning through multiple projections of a numerically re-oriented vertebra with the estimated posture. Approach. We proposed an improved YOLO-type neural network model (YOLOPOSE3D) to estimate the posture of a vertebra before pedicle path planning. In YOLOPOSE3D, the vertebral posture is given as a rotation quaternion and 3D location coordinates by optimizing the intersection over union of the vertebra with the predicted posture and the actual posture. Then, a new local coordinate system is established for the vertebra based on the estimated posture. Finally, the optimal pedicle screw path trajectory is determined from the multiple projections of the vertebra in the local coordinates. Main results. The experimental results in difficult cases of scoliosis showed that the new YOLOPOSE3D network could accurately detect the location and posture of the vertebra with average translation and orientation errors as small as 1.55 mm and 2.55°. The screw path planning achieved 83.1% success rate without breaking the pedicle cortex for the lumbar vertebral L1–L5, which is better than that of a doctor’s manual planning, 82.4%. With the clinical class A requirement to allow less than 2 mm out of the pedicle cortex, the success rate achieved nearly 100%. Significance. The proposed YOLOPOSED3D method can accurately determine the vertebral postures. With the improved posture prior, better clinical outcomes can be achieved for pedicle screw placement in spine internal fixation procedures.

Altered Brain Connectivity and Network Topological Organization in a Non-ordinary State of Consciousness Induced by Hypnosis.

Hypnosis has been shown to be of clinical utility; however, its underlying neural mechanisms remain unclear. This study aims to investigate altered brain dynamics during the non-ordinary state of consciousness induced by hypnosis. We studied high-density EEG in 9 healthy participants during eyes-closed wakefulness and during hypnosis, induced by a muscle relaxation and eyes fixation procedure. Using hypotheses based on internal and external awareness brain networks, we assessed region-wise brain connectivity between six ROIs (right and left frontal, right and left parietal, upper and lower midline regions) at the scalp level and compared across conditions. Data-driven, graph-theory analyses were also carried out to characterize brain network topology in terms of brain network segregation and integration. During hypnosis, we observed (1) increased delta connectivity between left and right frontal, as well as between right frontal and parietal regions; (2) decreased connectivity for alpha (between right frontal and parietal and between upper and lower midline regions) and beta-2 bands (between upper midline and right frontal, frontal and parietal, also between upper and lower midline regions); and (3) increased network segregation (short-range connections) in delta and alpha bands, and increased integration (long-range connections) in beta-2 band. This higher network integration and segregation was measured bilaterally in frontal and right parietal electrodes, which were identified as central hub regions during hypnosis. This modified connectivity and increased network integration-segregation properties suggest a modification of the internal and external awareness brain networks that may reflect efficient cognitive-processing and lower incidences of mind-wandering during hypnosis.

General anesthesia with nerve blocks for a patient with femoral fracture and essential thrombocythemia: a case report.

Essential thrombocythemia (ET) is a type of myeloproliferative neoplasm characterized by an abnormal increase in platelets. We report a female patient with a severe femoral fracture and ET who underwent the femoral intramedullary fracture fixation procedure. Her past medical history included hypertension and ET. On the second day of hospitalization, her platelet count was 922 × 109/L. In our case, general anesthesia combined with a femoral nerve block and a lateral femoral cutaneous nerve block were used when the platelet count was within normal range. After surgery, the platelet count increased to 979 × 109/L despite using anticoagulant drugs and hydroxyurea. The postoperative recovery went well after the follow-up of this patient. In this case report, we provide our experience of anesthesia management and review the progress of relevant literature to provide some reference.

Open Reduction of Pediatric Femur Fracture: A Technical Trick

Open Reduction of Pediatric Femur Fracture: A Technical Trick

Autologous Bone Graft From the Ipsilateral Distal Femur in Tibial Condyle Fractures.

Fractures of the proximal tibia often require void filling to support articular fragments in combination with internal fixation. The most common techniques are iliac autograft, allograft, or synthetic bone graft substitutes.The distal femur and its large volume condyles are a source of cancellous bone graft within the surgical site of an open reduction and internal fixation procedure. We have used a minimally invasive technique to harvest bone graft from the distal femur, using a bone graft drill. We performed this investigation to determine whether our technique of using distal femoral autograft to fill bone voids when treating proximal tibial fractures with open reduction and internal fixation is effective and safe. We also sought to determine the degree to which the bone graft incorporates into the tibia during fracture healing, the degree to which the harvest site heals, and the degree of secondary joint line depression.In all 12 patients, the bone graft had sufficient volume to fill the subchondral void in the proximal tibia, all fractures had healed at follow-up, and fracture reduction was maintained in most cases. We found no pain at the harvest site during follow-up, and there were no signs of drill penetration in articular or cortical structures. Drill holes at the harvest site showed sparse amounts of newly formed bone on CT in most of its circumference in all patients.There were no pathological changes in the femoral condyles with relation to the bone grafting procedure, and 5 patients showed radiographic signs of osteoarthritis in one or more joint compartments of the knee. The results showed this technique to provide similar success as reported alternatives without major complications and we continue to use this technique of harvesting distal femoral autograft to supplement open reduction and internal fixation of selected proximal tibial fractures.

Nano‐hydroxyapatite reinforced polylactic acid bioabsorbable cancellous screws for bone fracture fixations

AbstractBioabsorbable polymer implants aid the fracture treatment to overcome the limitations of metallic implants like stress shielding, corrosion, and revision surgeries. The cancellous screw is one of the internal fixation implants more frequently used in fixation procedures. In this work, nano‐hydroxyapatite (nHAp) reinforced polylactic acid cancellous screws were developed for bone fracture treatment. The biocompatibility and mechanical tests were performed before and after in‐vitro hydrolytic degradation studies. The addition of nanofillers (10 wt% nHAp) enhanced the pullout strength, torsional strength, and shear strength by 18%, 48%, and 5%, respectively. The performed thermal studies confirmed that the nanohydroxyapatite facilitates the crystallization process. A mass loss of about 18% in the case of neat PLA and 12% in the case of 10 wt% nHAp was observed for 90 days of in‐vitro hydrolytic degradation studies. So, the developed combination of biocomposite could help fabricate patient‐specific bioabsorbable fixation devices like screws and plates.

Comparison of a Hybrid Intramedullary Pin with External Fixation Procedure and a Tape Splint on Tibiotarsal Fractures in Budgerigars (Melopsittacus undulatus): A Retrospective Study

Comparison of a Hybrid Intramedullary Pin with External Fixation Procedure and a Tape Splint on Tibiotarsal Fractures in Budgerigars (Melopsittacus undulatus): A Retrospective Study

Management of Unilateral TMJ Dislocated Facial Bone Fracture due to an rarely Industrial Accident

Introduction: Traffic accidents commonly cause maxillofacial trauma but rarely industrial accidents. Treatment of multiple maxillofacial traumas needs comprehensive and immediate care to prevent further complications. Objective: Management of a maxillofacial fracture accompanied by dislocation of the right temporomandibular joint due to a fall in a rice mill. Case report: A 20-year-old male patient complained of bleeding and facial fractures due to a rice milling accident approximately one day before admission. The case diagnosis was multiple maxillofacial fractures with condyle dislocation. Emergency oral and maxillofacial surgery was performed immediately and quickly with minimal intervention on the upper jaw to prevent persistent cerebrospinal fluid leakage and prevent infection. Definitive treatment was soft tissue reconstruction, ORIF of the maxillary and mandibular fractures, and repositioning of the condyle dislocation. Conclusion: Multiple facial bone fractures accompanied by TMJ dislocation can result in deformity and loss of facial function affecting the patient's social life. Immediate action and open reduction internal fixation (ORIF) procedure performed in this case were able to restore stomatognathic and facial function. Keywords: Industrial accident, maxillofacial trauma, open reduction internal fixation, temporal mandibular joint dislocation Introduction: Traffic accidents commonly cause maxillofacial trauma but rarely industrial accidents. Treatment of multiple maxillofacial traumas needs comprehensive and immediate care to prevent further complications. Objective: Management of a maxillofacial fracture accompanied by dislocation of the right temporomandibular joint due to a fall in a rice mill. Case report: A 20-year-old male patient complained of bleeding and facial fractures due to a rice milling accident approximately one day before admission. The case diagnosis was multiple maxillofacial fractures with condyle dislocation. Emergency oral and maxillofacial surgery was performed immediately and quickly with minimal intervention on the upper jaw to prevent persistent cerebrospinal fluid leakage and prevent infection. Definitive treatment was soft tissue reconstruction, ORIF of the maxillary and mandibular fractures, and repositioning of the condyle dislocation. Conclusion: Multiple facial bone fractures accompanied by TMJ dislocation can result in deformity and loss of facial function affecting the patient's social life. Immediate action and open reduction internal fixation (ORIF) procedure performed in this case were able to restore stomatognathic and facial function. Keywords: Industrial accident, maxillofacial trauma, open reduction internal fixation, temporal mandibular joint dislocation

Extra-Articular Distal Humerus Plate 3D Model Creation by Using the Method of Anatomical Features.

Proper fixation techniques are crucial in orthopedic surgery for the treatment of various medical conditions. Fractures of the distal humerus can occur due to either high-energy trauma with skin rupture or low-energy trauma in osteoporotic bone. The recommended surgical approach for treating these extra-articular distal humerus fractures involves performing an open reduction and internal fixation procedure using plate implants. This surgical intervention plays a crucial role in enhancing patient recovery and minimizing soft tissue complications. Dynamic Compression Plates (DCPs) and Locking Compression Plates (LCPs) are commonly used for bone fixation, with LCP extra-articular distal humerus plates being the preferred choice for extra-articular fractures. These fixation systems have anatomically shaped designs that provide angular stability to the bone. However, depending on the shape and position of the bone fracture, additional plate bending may be required during surgery. This can pose challenges such as increased surgery time and the risk of incorrect plate shaping. To enhance the accuracy of plate placement, the study introduces the Method of Anatomical Features (MAF) in conjunction with the Characteristic Product Features methodology (CPF). The utilization of the MAF enables the development of a parametric model for the contact surface between the plate and the humerus. This model is created using specialized Referential Geometrical Entities (RGEs), Constitutive Geometrical Entities (CGEs), and Regions of Interest (ROI) that are specific to the human humerus bone. By utilizing this anatomically tailored contact surface model, the standard plate model can be customized (bent) to precisely conform to the distinct shape of the patient's humerus bone during the pre-operative planning phase. Alternatively, the newly designed model can be fabricated using a specific manufacturing technology. This approach aims to improve geometrical accuracy of plate fixation, thus optimizing surgical outcomes and patient recovery.

Use of adhesive cranial bone flap fixation without hardware to improve mechanical strength, resist cerebrospinal fluid leakage, and maintain anatomical alignment: a laboratory study.

Titanium plates and screws (TPS) are the current standard of care for fixation of cranial bone flaps. These materials have been used for decades but have known potential complications, including flap migration, bone resorption/incomplete osseous union, hardware protrusion, cosmetic deformity, wound infection/dehiscence, and cerebrospinal fluid (CSF) leakage. This study evaluated the efficacy of a novel mineral-organic bone adhesive (Tetranite) for cranial bone flap fixation. Craniotomy bone flaps created in human cadaveric skulls were tested under quasistatic and impact loading in the following conditions: 1) uncut skull; 2) bone flaps fixated with TPS alone; and 3) bone flaps fixated with bone adhesive alone. All fixative surgical procedures were performed by a group of 16 neurosurgeons in a simulated surgical environment. The position of adhesive-fixated cranial bone flaps was measured using computed tomography and compared with their original native location. The resistance of adhesive-fixated cranial bone flaps to simulated CSF leakage was also evaluated. Because there was a gap around the circumference of the TPS-fixated specimens that was visible to the naked eye, pressurized CSF leak testing was not attempted on them. Adhesive-fixated bone flaps showed significantly stiffer and stronger quasistatic responses than TPS-fixated specimens. The strength and stiffness of the adhesive-fixated specimens were not significantly different from those of the uncut native skulls. Total and plastic deflections under 6-J impact were significantly less for adhesive-fixed bone flaps than TPS. There were no significant differences in any subthreshold impact metrics between the adhesive-fixed and native specimens at both 6-J and 12-J impact levels, with 1 exception. Plastic deflection at 6-J impact was significantly less in adhesive-fixated bone flaps than in native specimens. The energy to failure of the adhesive-fixated specimens was not significantly different from that of the native specimens. Time since fixation (20 minutes vs 10 days) did not significantly affect the impact failure properties of the adhesive-fixated specimens. Of the 16 adhesive-fixated craniotomy specimens tested, 14 did not leak at pressures as high as 40 mm Hg. The neurosurgeons in this study had no prior exposure or experience with the bone adhesive. Despite this, improved resistance to CSF egress, superior mechanical properties, and better cosmetic outcomes were demonstrated with bone adhesive compared with TPS.

Retrieval of broken intra-medullary guide wire in femoral shaft fracture: A case report and surgical technique

Intramedullary Nailing is a standard procedure for fixation of various fractures in orthopedic practice. With the procedure also important is being aware of the complications and methods of managing them. A broken or stuck hardware can result in these procedures. We present a case with broken guide wire in a case of femoral shaft fracture in a young individual and the technique we used to retrieve it retrogradely from the fracture site. This technique shall be a useful technique to all the orthopedic surgeons if such a situation arises.

Surgeon Preference for Prophylactic Contralateral Fixation in Slipped Capital Femoral Epiphysis (SCFE) Patients: A Nationwide POSNA Survey Study.

It is estimated that 11% to 60% of unilateral slipped capital femoral epiphysis (SCFE) patients will develop contralateral pathology, usually within 18 months after the first event. Despite this, prophylactic fixation remains controversial, and there is significant variability in surgeon preferences. Thus, this study aimed to determine which factors predict surgeon preferences for prophylactic contralateral pinning in SCFE patients. We designed a survey for pediatric orthopedic surgeons to collect data on (1) surgeon and hospital characteristics, (2) individual preference for contralateral SCFE pinning in three disparate hypothetical scenarios, and (3) personal risk-aversion traits. The questionnaire was distributed across the United States by the POSNA Evidence-Based Orthopaedics Committee. All POSNA members were eligible to respond. We performed analyses to evaluate the role of patient risk factors in hypothetical surgical decision-making and to determine if surgical training, hospital characteristics, and geographic region influenced prophylactic pinning in a surgeon's real-life practice. A total of 126 POSNA members responded to the survey. In the last year, a median of 6.5 SCFE patients was seen per surgeon (1243 patients total). A median of 10% of those patients underwent prophylactic contralateral fixation. In multiple analyses, surgeons were influenced by body mass index, open triradiate cartilage, patient race, various endocrine abnormalities, and specific radiographic measurements when deciding to fix the contralateral side prophylactically. Moreover, in multivariate regression, more years in practice and a hospital size of 500+ beds predicted fewer prophylactic fixation procedures (all P <0.05). Surgeons practicing in the South Atlantic, New England, and Mountain regions of the United States estimated the highest rate of contralateral pinning. This study's findings suggest that multiple factors influence surgeons' decisions to prophylactically fix the contralateral side in SCFE patients. Surgical training, hospital characteristics, and geographical regions played a role in decision-making. N/A.

Femoral neck system vs. cannulated screws on treating femoral neck fracture: a meta-analysis and system review.

This meta-analysis aimed to compare the relative safety and efficacy of cannulated compression screw (CCS) and femoral neck system (FNS) in treating patients with femoral neck fractures and to provide evidence-based medical evidence for FNS in treating femoral neck fractures. PubMed, Embase, Cochrane, and China National Knowledge Infrastructure databases were searched to collect outcomes related to femoral neck fractures treated with FNS and CCS, including time to fracture healing, incidence of non-union, incidence of osteonecrosis of the femoral head, incidence of failure of internal fixation, rate of femoral neck shortening, Harris hip score, Barthel index, operative time, intraoperative blood loss, fluoroscopy frequency, and complications. A meta-analysis was performed using RevManv5.4 (The Cochrane Collaboration) and Stata v14.0 software. This analysis included 21 studies involving 1,347 patients. The results showed that FNS was superior to CCS in terms of fracture healing time [mean difference (MD) = -0.75, 95% CI = (-1.04, -0.46), P < 0.05], incidence of bone non-union [odds ratio (OR) = 0.53, 95% CI = (0.29, 0.98), P = 0.04], incidence of osteonecrosis of the femoral head [OR = 0.49, 95% CI = (0.28, 0.86), P = 0.01], incidence of internal fixation failure [OR = 0.30, 95% CI = (0.18, 0.52), P < 0.05], rate of femoral neck shortening [OR = 0.38, 95% CI = (0.27, 0.54), P > 0.05], Harris hip score [MD = 3.31, 95% CI = (1.99, 4.63), P < 0.001], Barthel index [MD = 4.31, 95% CI = (3.02, 5.61), P < 0.05], intraoperative bleeding [MD = 14.72, 95% CI = (8.52, 20.92), P < 0.05], fluoroscopy frequency [OR = 0.53, 95% CI = (0.29, 0.98), P = 0.04], and complications [OR = 0.31, 95% CI = (0.22, 0.45), P < 0.05]. The difference between FNS and CCS in operative time was not statistically significant [MD = -2.41, 95% CI = (-6.88, 2.05), P = 0.29]. FNS treatment of femoral neck fracture can shorten the fracture healing time; reduce the incidence and translucent rate of bone non-union, osteonecrosis of the femoral head, and internal fixation failure; reduce intraoperative blood loss and postoperative complications; and improve hip joint function and activity. We are confident in the findings that FNS, an effective and safe procedure for internal fixation of femoral neck fractures, is superior to CCS.

Trends and Risk Factors for Surgical Site Infection after Treatment of the Ankle Fracture: National Cohort Study.

Surgical site infection (SSI) is a major complication after the surgical treatment of ankle fractures that can result in catastrophic consequences. This study aimed to determine the incidence of SSI in several cohorts from national insurance databases over the past 12 years and identify its predictors. The claimed data for patients (n = 1,449,692) with ankle fractures between 2007 and 2019 were investigated, and a total of 41,071 patients were included in the final analysis. The covariates included were age, sex, season, fracture type (closed vs. open), type of surgical fixation procedure, and comorbidities of each patient. All subjects were divided into two groups according to the SSI after the surgical fixation of the ankle fracture (no infection group vs. infection group). The number of SSIs after the surgical treatment of ankle fractures was 874 (2.13%). Open fractures [odds ratio, (OR) = 4.220] showed the highest risk for SSI, followed by the male sex (OR = 1.841), an increasing number of comorbidities (3-5, OR = 1.484; ≥6, OR = 1.730), a history of dementia (OR = 1.720) or of myocardial infarction (OR = 1.628), and increasing age (OR = 1.010). The summer season (OR = 1.349) showed the highest risk among the four seasons for SSI after ankle fracture surgery.

Use of the iliac-outlet and iliac-inlet combined views in percutaneous posterior column retrograde screw fixation

Posterior column fractures are common acetabular injuries. Although displaced fractures require open reduction and fixation, undisplaced patterns may benefit from percutaneous screw fixation. The combination of iliac oblique with inlet and outlet views offers an intuitive and panoramic rendering of the bony corridor into the posterior column; lateral cross table view completes the sequence of fluoroscopic projections. Herein we describe the use of outlet/inlet iliac views and a detailed procedure for percutaneous retrograde posterior column screw fixation.

Benefits of Erector Spinae Block in lumbar Vertebral Surgical Fixation Procedures; Beyond the Perioperative Analgesic Outcomes

Benefits of Erector Spinae Block in lumbar Vertebral Surgical Fixation Procedures; Beyond the Perioperative Analgesic Outcomes