Environmental Problems Research Articles

Bio-Inspired Optimization Algorithm Associated with Reinforcement Learning for Multi-Objective Operating Planning in Radioactive Environment.

This paper aims to solve the multi-objective operating planning problem in the radioactive environment. First, a more complicated radiation dose model is constructed, considering difficulty levels at each operating point. Based on this model, the multi-objective operating planning problem is converted to a variant traveling salesman problem (VTSP). Second, with respect to this issue, a novel combinatorial algorithm framework, namely hyper-parameter adaptive genetic algorithm (HPAGA), integrating bio-inspired optimization with reinforcement learning, is proposed, which allows for adaptive adjustment of the hyperparameters of GA so as to obtain optimal solutions efficiently. Third, comparative studies demonstrate the superior performance of the proposed HPAGA against classical evolutionary algorithms for various TSP instances. Additionally, a case study in the simulated radioactive environment implies the potential application of HPAGA in the future.

Plasmonic Optical Fiber Sensors and Molecularly Imprinted Polymers for Glyphosate Detection at an Ultra-Wide Range

In this study, a surface plasmon resonance (SPR) sensor based on modified plastic optical fibers (POFs) was combined with a specific molecularly imprinted polymer (MIP), used as a synthetic receptor, for glyphosate (GLY) determination in aqueous solutions. Since GLY is a non-selective herbicide associated with severe environmental and health problems, detecting glyphosate in environmental and biological samples remains challenging. The selective interaction between the MIP layer and GLY is monitored by exploiting the SPR phenomenon at the POF’s gold surface. Experimental results show that in about ten minutes and by dropping microliter volume samples, the presented optical–chemical sensor can quantify up to three orders of magnitude of GLY concentrations, from nanomolar to micromolar, due to a thin MIP layer over the SPR surface. The developed optical–chemical sensor presents a detection limit of about 1 nM and can be used for onsite GLY measurements. Moreover, the experimental analysis demonstrated the high selectivity of the proposed POF-based chemical sensor.

The Extraction and Characterization of Microplastics of Biocompost and Water Samples Collected from the Different Semi-Urban Agronurseries

ABSTRACT Biocomposting at national and regional levels has recently been recognized as one of the feasible, nature-based solutions to prevent the accumulation and reuse of biodegradable waste in enhanced and effective mitigation measures for urban and semi-urban waste management. Recent research has mainly focused on organic compost contamination, as the negative effects of MP on soil systems have been extensively studied. According to current research, organic compost used as fertilizer on farmland contains many microplastics. In this context, microplastics (MPs) have been regarded as a global environmental problem and an emerging soil contaminant. The physico-chemical properties of water and compost samples were analyzed by APHA and AOAC methods. The extraction of microplastics was done using the density separation. In the current study, agricultural waste-based biocompost and water samples used for the production of biocompost were collected from four different agricultural nurseries in semi-urban areas of the Coimbatore city. The physicochemical properties (including heavy metal content) of the biocompost and water samples tested were on par/equal/lower than Indian standards. Interestingly, in the biocompost samples, 85% of the microplastic fragments and 15% of the fiber types were identified only in BC-B and BC-C, respectively, with different colors such as red, brown, blue, light yellow and transparency. However, no microplastics were found in the biocompost samples of BC-A and BC-D. Microplastic polymers such as polymethyl methacrylate (PMMA), polypropylene (PP), and ethylene vinyl acetate (EVA) were identified through ATR-FTIR analysis. The results suggest that semi-urban agricultural gardening may lead to the accumulation of microplastics in terrestrial environments, which may negatively impact soil and plant health. This study contributes to growing research into microplastic contamination in organic compost and its potential impact on agriculture and terrestrial ecosystems.

Development and structural characterisation of gelatin‐based sustainable food packaging from turkey (Meleagris gallopavo) skin by‐product

SummaryIn view of the environmental problems resulting from plastic‐based packaging, gelatin film production from alternative, sustainable sources are extremely important. The objective of this study was to utilise a major source of collagen derived from poultry waste to produce and characterise turkey skin gelatin films (TGF). TGFs were produced at different glycerol concentrations (20%, 30% and 40%) via solvent casting technique. TGFs characteristics were also compared with the bovine gelatin films (BGF). The thermal structural development of TGF solutions to form a film network was not affected by the glycerol content in the temperature sweep test. This property was determined earlier and at higher temperatures in TGF (22 °C–23 °C) than in BGF (19 °C). As the glycerol ratio increased, the moisture content increased from 14.80% to 22.46%, while the thickness (36 μm) and density (1.134–1.247 g cm−3) of TGFs remained constant due to the compact structures. The water vapour transmission rates of TGFs and BGF were similar (P >0.05), ranging from 0.48 to 0.53 g mm m−2 h−1 kPa−1. Lower solubility was found for TGF20 (44.78%) and TGF30 (63.59%) films compared to BGF30 (63.59%). TGF20 exhibited the highest tensile strength and lowest elongation at break values. TGF40 and BGF30 demonstrated the highest flexibility and extensibility (P >0.05). In XRD analysis, TG40 demonstrated a less amorphous film structure compared to BG30, since the increased interaction due to glycerol provided a more ordered polymeric structure. TG20 and TG30 showed lower decomposition rates and higher residue levels, indicating their higher thermal stability. Thus, gelatin films based on turkey skin could be the alternative natural biodegradable films with suitable glycerol content for desired mechanical, barrier and thermal properties.

High efficient CuCeO2‐δ/SiO2 catalyst for RWGS reaction: impact of Ce content and loading sequence

AbstractThe extensive use of fossil energy leads to wanton emission of CO2 and serious environmental problems. The exploration of high‐performance catalysts plays a pivotal role in CO2 resource utilization. In this paper, CuCeyK catalysts are prepared by wet impregnation method using ordered mesoporous SiO2 as support for the reverse water gas shift (RWGS) reaction. The physicochemical properties of the prepared catalysts are characterized by H2‐TPR, BET, XRD, Quasi in‐situ XPS, H2‐TPD, and CO2‐TPD techniques. The results demonstrate thatthe Cu0 species can form synergistic effects with oxygen vacancies (Ov) to enhance the CuCeyK catalytic performance. Additionally, the electronic effects between Ce and Cu not only enhances the adsorption and activation performances of the catalyst towards CO2 and H2 molecules, but also effectively suppresses the sintering of Cu0 species, thereby enhancing the stability of the corresponding catalyst. It is worth mentioning that the Ce content also directly affects the catalytic performances of the CuCeyK catalyst. The CuCe15K catalyst with a Ce content of 15% displays excellent CO2 hydrogenation performances, and the CO2 conversion and CO selectivity up to 41 % and 100 % at 420 °C, respectively. © 2024 Society of Chemical Industry and John Wiley & Sons, Ltd.

Scenario Analysis of Food Phosphorus Footprint in Kisumu, a Lakeside East African City in Lake Victoria (Kenya).

Increased food production and consumption patterns have resulted in higher urban food phosphorus footprints, leading to a series of resource and environmental problems worldwide. We quantified the food phosphorus footprint of the African city of Kisumu using substance flow analysis. Our aim was to develop Kisumu's sustainable phosphorus management framework so that the city would reduce phosphorus losses into the food system. Our results show that in the year 2023, the import and export of food phosphorus in the Kisumu food system was 2730.26 ± 2.7% t P yr-1 and 3297.05 ± 2.4% t P yr-1, respectively. There was -566.79 ± -18% t P yr-1 food phosphorus deficit in the Kisumu food system. Crop planting subsystem runoff/leaching/erosion loss, household consumption subsystem waste loss, and pit latrine subsystem blackwater loss are the major pathways of phosphorus losses into the environment and the main contributors to the food phosphorus footprint in the city. The 2030 scenario analysis shows that implementing a comprehensive scenario scheme throughout the entire lifecycle process from phosphorus input to waste disposal is the best choice for reducing phosphorus losses and suppressing the growth of food phosphorus footprint in the future. Our study shows that the food phosphorus footprint in the Kisumu food system was 0.67 kg P cap-1yr-1 in 2023, which is still at a low level but may enter a continuous upward trend with the improvement of socio-economic development of the city. In our framework, we have proposed a few essential measures that include urine separation, installation of septic tank, adjustment of dietary structure, flexible layout of sanitary disposal facilities, and separation of organic waste streams to reduce food phosphorus footprints in Kisumu. Given the similarity of cities along the shores of Lake Victoria, our calculation methods and management strategies can be applied to other cities in the region.

КАБИНЕТЫ КУЛЬТУРЫ ЗДОРОВЬЯ И МУЗЫКОТЕРАПИИ В РАМКАХ НОВОЙ ПАРАДИГМЫ ЗДОРОВЬЕСБЕРЕЖЕНИЯ СИСТЕМЫ ШКОЛЬНОГО ОБРАЗОВАНИЯ

This article analyzes the reasons for the serious increase in morbidity among schoolchildren, which is demonstrated by modern statistics. Many of the external challenges that negatively affect children's health are presented: environmental problems, aggressive information, and other global problems. Obviously, their solution is complicated by its long-term nature, as it requires large-scale efforts at the state level. Meanwhile, the situation can be significantly improved in the short term. As a priority measure, the author recommends focusing efforts on the comprehensive correction of destructive factors within schools, such as a stressful environment, spiritual and moral underdevelopment, and a lack of literacy in matters of a healthy lifestyle for the students themselves. To effectively solve these problems, it is proposed to open rooms for health culture and music-art therapy, which should become a conductor of the main idea of the new paradigm—from general culture to the art of health care and general well-being. The foundation for achieving this goal is the existing retraining programs, which make it possible to train qualified specialists for such offices from among teachers, psychologists, and people with any higher education. At the same time, the advanced technologies of scientific music and art therapy presented in the article play an important role in preserving health, increasing adaptive capabilities, and harmoniously developing the schoolchild’s personality.

Odours in Asphalt: Analysis of the Release of H2S from Bitumen by a Mass Spectrometric Residual Gas Analyser.

During the production and laying phases of hot-mixing asphalt (HMA), various volatile organic compounds (VOCs) and noxious gases such as H2S are released into the atmosphere. These emissions are a serious environmental problem, a risk to human health, and expose workers and residents to unfriendly odours. The aim of this study was the development of a fast and sensitive analytical method to detect the H2S emitted from hot bituminous binder that is generally used in the various stages of asphalt production, processing, handling and during road construction. The method consisted in the analysis of evolved H2S from a flask with molten bitumen, using nitrogen as a carrier gas to lead the volatile compounds into a residual gas analyser equipped with a quadrupole mass spectrometer. The analysis was performed following the H2S-specific signals at m/z 33 (HS+) and at m/z 34 (H2S+) in real time, directly on the sample without laborious and expensive pre-treatments and with short response times (<6 s). Calibration with a standard mixture of 1000 ppm of H2S in nitrogen allows semi-quantitative H2S detection. The sensitivity and rapidity of the method were evaluated by quenching the release of sulphur compounds with commercial odour-suppressing agents. Upon addition of 0.1% of additive in two minutes, the H2S signal drops about 80% in two minutes, confirming the good response of the method, even with a very complex matrix.

STAR-RIS-assisted key generation method in quasi-static environment

In this paper, we introduce a new method to solve the low-entropy problem in a quasi-static environment. We utilize a simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) that transmits and reflects incoming signals to users located on different sides of the surface. Specifically, we design the flow of multi-user channel probing when STAR-RIS is assisted, analyze and derive the analytical expression of the secret key capacity (SKC) of STAR-RIS-assisted system from the perspective of information theory, and finally analyze how to maximize the SKC and sum of all users under three different working protocols of STAR-RIS. The simulation results show that: (1) STAR-RIS can achieve better SKC performance than the conventional reflection/transmission RIS; and (2) the SKC is determined by the number of STAR-RIS elements, correlation coefficient, pilot length and RIS-reflected channel quality, and the time switching protocol can obtain higher SKC than the energy splitting protocol and mode switching protocol.

The Paradox Between Economic Gain and Environmental Sustainability: A Case of Small Island Tourism in Pari Island, Indonesia

As an important economic sector in Indonesia, tourism, particularly for small islands, should shift towards sustainable management practices. This study examines possible sustainable tourism management practices in Pari Island, one of Indonesia???s small islands with both a diverse ecosystem and high annual tourist flux. Tourism activities in Pari Island have resulted in environmental impacts, and implementing sustainable tourism has therefore become challenging. This study used a comprehensive assessment framework called DPSIR (Driver‐Pressure‐State‐Impact‐Response) to identify factors that triggered environmental problems and assess their implications for sustainable tourism management. A questionnaire method was used to collect survey data from 317 residents and 143 tourists. Water quality samples were collected from 15 sampling points (11 groundwater wells and 4 seawater locations) and tested via the APHA‐9221‐B method to determine the coliform bacteria content as a proxy for tourism pressure on the environment. Results showed that the small island tourism was built upon economic activities that trigger a range of environmental pressures (e.g., increased population, tourists, and lodging), with consequences for tourism-related resource exploitation, spatial changes, and contamination of groundwater and seawater. Implementing the DPSIR approach would ensure adequate responses to the main problems of small island tourism, such as creation of regulations informed by tourism???s carrying capacity, an open???close system for use of coastal and marine areas, increased public and tourist awareness, and legal assurance over spatial control.

Management of Plastic Wastes through Recent Advanced Pyrolysis Processes

Plastics are predominant in numerous sectors like packaging, agriculture, hardware, electronics, and many others. Annual plastic demand has been rapidly growing in the last few decades because of the increasing dependency on plastics. As a consequence, massive amounts of plastic waste are being generated every year. These plastic wastes are non-biodegradable, and hence their disposal poses a serious threat to the ecosystem and causes significant environmental problems such as endangering the safety of marine life, wildlife, air, water, and soil, etc. A large portion of plastic waste ends up in landfills, and only a small fraction is recycled. The continuous dependence on landfills as the main disposal method for plastic waste is costly and ineffective. Common solutions to plastic waste management are incineration and recycling; however, incineration emits harmful pollutants and greenhouse gases that contribute to ozone layer depletion and global warming; moreover, recycling is expensive and inefficient. As an alternative to recycling and incineration, the pyrolysis process can convert plastic wastes into more valuable fuel products. Pyrolysis is a thermal process that converts raw material into pyrolysis liquid, solid wax, and non-condensable gases in the absence of oxygen. This process is attractive because it is economical and energy-efficient, and it can be used to convert various types of plastic waste into valuable products. In recent years, there have been significant developments in pyrolysis applications in liquid fuel production from plastic wastes. This work reviews recent advances in and challenges for the pyrolysis process for converting plastic wastes into a valuable alternative fuel, focusing on studies of advanced pyrolysis processes published over the last five years. The paper also highlights the numerical modeling of pyrolysis of plastic wastes and the potential impact of pyrolysis on the future of sustainable waste-management practices of plastics.

Utilization of fungal and bacterial bioremediation techniques for the treatment of toxic waste and biowaste

The escalating accumulation of toxic wastes and biowastes constitutes a critical environmental crisis that demands immediate and effective solutions. Traditional waste treatment methods, predominantly chemical and physical, are increasingly viewed as unsustainable, burdened by high operational costs and the risk of generating secondary pollutants. Against this backdrop, bioremediation emerges as a crucial and sustainable alternative, utilizing the natural detoxifying capabilities of microorganisms. This review article focuses on the use of fungal and bacterial strategies in bioremediation, emphasizing their vital role in the degradation, stabilization, or detoxification of pollutants. We provide an in-depth analysis of the mechanisms by which fungi and bacteria break down various contaminants, presenting a current snapshot of the field’s state of knowledge. The article highlights recent innovative advancements that improve the effectiveness and expand the applicability of bioremediation technologies. Moreover, it discusses the practical challenges of scaling these solutions to meet global environmental needs and suggests directions for future research and implementation. This synthesis not only underscores the significance of microbial bioremediation in addressing pressing environmental problems but also acts as a call to action for continued innovation in the sustainable management of hazardous wastes.

Construction and validation of computational techniques as part of a holistic approach to complex engineering design

As a full-service provider of bespoke solutions to environmental noise problems, there is a need to have a precise understanding of the performance of our engineered products and complex assemblies. More specifically, there are risks, as well as limitations, to relying solely on a single scientific method-e.g., empirical, computational, numerical or analytical. In the following paper, we describe the validation process of sophisticated computational software-a suite of Siemens software-to bolster our risk assessment practices. Although computational tools generally require extensive 'calibration,' our interest in pursuing the software is to model diverse constraints and environmental conditions of projects, which cannot be 'simply' assessed using empirical, numerical and analytical tools. Herein are presented examples of projects utilizing our holistic approach to assuring the performance of our engineering solutions. More specifically, we employ aero-vibro-acoustical simulations to model the aero-vibro-acoustical performance (e.g., airflow and pressure drop, dynamic insertion loss) of our industrial acoustic silencers (and similar complex assemblies).

“URBAN REHABILITATION IN RUSSIA BROOKS NO DELAY”: STATE AND SOCIETY IN THE FIGHT AGAINST RIVERS POLLUTION AT THE END OF THE 19th — EARLY 20th CENTURIES

At the turn of the 19th and20th centuries, the growth of urban population and development of urban infrastructure were accompanied by the emergence of environmental problems, including the increase of river pollution, which might cause water supply diffi culties. The central and local authorities, as well as representatives of various public, scientific, professional organizations and business circles, were involved in solving these problems. The order of their interaction could be diff erent, but these joint projects made it possible to achieve the best results in combating river pollution caused by industrial and domestic waste, to determine priorities in the system of water protection and to improve the supply of potable water to the population. Thanks to the activities of such organizations as the Society for Assistance to the Improvement and Development of Manufacturing Industry, Russian Water Supply Congresses, sanitary stations, and the Provisional Committee for the Development of Measures to Protect the Water Bodies of the Moscow Industrial District from Pollution, a rather extensive set of measures was carried out to study the properties, nature, and degree of water pollution in the rivers that served as sources of water supply for city dwellers, and the most eff ective methods of water purifi cation were determined in experiments. Practical recommendations were developed on the use of the most eff ective and cost-efficient methods and facilities for industrial wastewater treatment. The best domestic specialists were involved in solving the identified problems, who utilized international and Russian experience. The lack of sufficient funding for water protection activities resulted in some initiatives not being or being only partially implemented. In addition, a number of practical measures which had been planned in this area had to be postponed because of the outbreak of World War I in 1914

Global Optimization and Quantitative Assessment of Large-Scale Renewables-Based Hydrogen System Considering Various Transportation Modes and Multi-Field Hydrogen Loads

In the past, hydrogen was mostly produced from fossil fuels, causing a certain degree of energy and environmental problems. With the development of low-carbon energy systems, renewable energy hydrogen production technology has developed rapidly and become one of the focuses of research in recent years. However, the existing work is still limited by small-scale hydrogen production systems, and there is a lack of comprehensive research on the whole production-storage-transportation-utilization hydrogen system (PSTUH2S), especially on the modeling of different hydrogen transportation modes and various hydrogen loads in different fields. To make up for these deficiencies, the specific physical and mathematical models of the PSTUH2S are firstly described in this paper, with a full account of large-scale water-electrolytic hydrogen production from renewable power curtailment and grid power, various hydrogen storage and transportation modes, and multi-field hydrogen consumption paths. Furthermore, to achieve the maximum economic, energy, and environmental benefits from the PSTUH2S, a multi-objective nonlinear optimization model is also presented herein and then solved by the hybrid method combining the nonlinear processing method, the CPLEX solver and the piecewise time series production simulation method. Lastly, case studies are conducted against the background of a region in northwest China, where hydrogen consumption capacity in various years is accurately assessed and the potential advantages of the PSTUH2S are demonstrated. As the simulation results show, the power curtailment of renewable energy generation can be reduced by 3.61/11.87/14.72 billion kW·h in 2025/2030/2035, respectively, thus contributing to a 4.98%~10.09% increase in the renewable energy consumption rate and millions of tons of carbon emission reduction in these years. In terms of the total equivalent economic benefits, the proposed method is able to bring about a cost saving of USD 190.44 million, USD 634.66 million, and USD 865.87 million for 2025, 2030, and 2035, respectively.

Assessment of gully influencing factors and susceptibility using remote sensing-based frequency ratio method in Sunshui River Basin, Southwest China.

Gully erosion is a serious global environmental problem associated with land degradation and ecosystem security. Examining the influencing factors of gullies and determining susceptibility hold significance in environmental sustainability. The study evaluates the spatial distribution, influencing factors, and susceptibility of gullies in the Sunshui River Basin in Sichuan Province, Southwest China. The frequency ratio method supported by satellite images and the gully inventory dataset (1614 gully head points) with different influencing factors were applied to assess the distribution and susceptibility of gullies. Additionally, gully head points were grouped into a training set (70%, 1130 points) and a test set (30%, 484 points). Spatial distribution results indicated that most gullies are located in the middle and upper part of the basin, characterized by moderate elevation (2100-3300m), steep slopes (11.63-27.34°), abandoned farmland, and Cambisols soil, and fewer gullies are located in lower part characterized by lower elevation, gentle slopes, and low vegetation coverage. Land use and land cover influence on susceptibility is significantly greater than other factors with a prediction rate of 33.9, especially farmland abandonment, while the occurrence of gullies is also more often on southwest-orientated slopes. Gully susceptibility highlighted that the study area affected by the very low, low, moderate, high, and very high susceptibilities to these gullies covered an area of about 16%, 23%, 32%, 26%, and 3% of the total basin respectively, which indicates 61% of the study area is susceptible to gully erosion. Moderate to high susceptibility is situated in the upper and middle part, consistent with the spatial distribution of gullies in the basin, and very high susceptibility (3%) is distributed in both the lower and upper parts of the basin. These results have important implications for soil loss control, land planning, and integrated watershed management in the mountainous areas of Southwest China.

Reducing residual chlortetracycline in wastewater using a whole-cell biocatalyst

Antibiotic contamination has become an increasingly important environmental problem as a potentially hazardous emergent and recalcitrant pollutant that poses threats to human health. In this study, manganese peroxidase displayed on the outer membrane of Escherichia coli as a whole-cell biocatalyst (E. coli MnP) was expected to degrade antibiotics. The manganese peroxidase activity of the whole-cell biocatalyst was 13.88 ± 0.25U/L. The typical tetracycline antibiotic chlortetracycline was used to analyze the degradation process. Chlortetracycline at 50mg/L was effectively transformed via the whole-cell biocatalyst within 18h. After six repeated batch reactions, the whole-cell biocatalyst retained 87.2% of the initial activity and retained over 87.46% of the initial enzyme activity after storage at 25°C for 40 days. Chlortetracycline could be effectively removed from pharmaceutical and livestock wastewater by the whole-cell biocatalyst. Thus, efficient whole-cell biocatalysts are effective alternatives for degrading recalcitrant antibiotics and have potential applications in treating environmental antibiotic contamination.

Effect of Cerium on Inclusion Evolution and Pitting Corrosion of Nb-Microalloyed Steel.

Nb-microalloyed steels are widely used in construction engineering fields due to their excellent mechanical properties, but they face serious corrosion problems in service environments. Pitting corrosion is the severest form of corrosion, and the types of inclusions are the leading cause to induce pitting corrosion. A new strategy is proposed to enhance the corrosion resistance of steels by achieving a beneficial transformation of inclusions with Ce treatment. In this paper, two types of Nb-microalloyed steels (0% Ce and 0.0058% Ce steel) were prepared to study the modification effect on inclusions in industrial production. The spherical CaS•C12A7 inclusions were modified to smaller ellipsoidal Ce2O2S inclusions, and the proportion of inclusions (0-2 μm) increased significantly from 27 to 66%, while large inclusions (>6 μm) disappeared. A kinetic model of inclusion evolution was established. The results of electrochemical tests indicated that the corrosion potential was positively shifted, and the corrosion current was reduced after Ce treatment. Additionally, the number of defects in the passivation film was decreased, and the corrosion resistance of the steel was significantly improved. The addition of Ce changed the types of inclusions and reduced the number of pitting nucleation points, which led to a remarkable reduction in the number and size of pitting pits. The mechanism of pitting corrosion induced by different types of inclusions was further investigated, and a pitting corrosion model was modeled based on the immersion experiments. Research results provide theoretical support for enhancing the corrosion resistance of steel.

Investigating the impact of different routes of nano and micro nickel oxide administration on rat kidney architecture, apoptosis markers, oxidative stress, and histopathology.

Although the production and use of nickel oxide nanoparticles (NiONP) are widespread, environmental and public health problems are associated with it. The kidney is the primary organ in excretion and is among the target organs in nanoparticle toxicity. This study aimed to compare the renal toxicity of nickel oxide (NiO) microparticles and nickel oxide nanoparticles by different routes of administration, such as oral, intraperitoneal (IP), and intravenous (IV). Seven groups were formed, with 42 male rats and six animals in each group. NiO oral (150mg/kg), NiO IP (20mg/kg), NiO IV (1mg/kg), NiONP oral (150mg/kg), NiONP IP (20mg/kg), and NiONP IV (1mg/kg) was administered for 21days. After NiO and NiONP administration, a decrease in antioxidant activities and an increase in lipid peroxidation occurred in the kidney tissue of rats. Increased kidney urea, uric acid, and creatinine levels were observed. Inhibition of acetylcholinesterase activity and an increase in interleukin 1 beta were detected. Apoptotic markers, Bax, caspase-3, and p53 up-regulation and Bcl-2 down-regulation were observed. In addition, histopathological changes occurred in the kidney tissue. In general, it was observed that nickel oxide microparticles and nickel oxide nanoparticles cause inflammation by causing oxidative stress in the kidney tissue, and NiONP IV administration is more effective in renal toxicity.

Performance and Environmental Assessment of Biochar-Based Membranes Synthesized from Traditional and Eco-Friendly Solvents.

Water contamination resulting from coal spills is one of the largest environmental problems affecting communities in the Appalachia Region of the United States. This coal slurry contains potentially toxic substances, such as hydrocarbons, heavy metals, and coal cleaning chemicals, and its leakage into water bodies (lakes, rivers, and aquifers) can lead to adverse health effects not only for freshwater bodies and plant life but also for humans. This study focused on two major experiments. The first experiment involved the use of biochar to create a biochar-polysulfone (BC-PSf) flat-sheet multifunctional membrane to remove organic contaminants, and the other major experiment compared eco-friendly (gamma-valerolactone-GVL; Rhodiasolv® PolarClean-PC) and petroleum-derived solvents (i.e., N-methyl-pyrrolidone-NMP) in the fabrication of the biochar-polysulfone membranes. The resulting membranes were tested for their efficiency in removing both positively and negatively charged organic contaminants from the collected water at varying pH values. A comparative life cycle assessment (LCA) with accompanying uncertainty and sensitivity analyses was carried out to understand the global environmental impacts of incorporating biochar, NMP, GVL, and PC in the synthesis of PSf/NMP, BC-PSf/NMP, PSf/GVL, BC-PSf/GVL, PSf/PC, and BC-PSf/PC membranes at a set surface area of 1000 m2. The results showed that the addition of biochar to the membrane matrix increased the surface area of the membranes and improved both their adsorptive and mechanical properties. The membranes with biochar incorporated in their matrix showed a higher potential for contaminant removal than those without biochar. The environmental impacts normalized to the BC-PSf/GVL membrane showed that the addition of biochar increased global warming impacts, eutrophication, and respiratory impacts by over 100% in all the membrane configurations with biochar. The environmental impacts were highly sensitive to biochar addition (Spearman's coefficient > 0.8). The BC/PSf membrane with Rhodiasolv® PolarClean had the lowest associated global environmental impacts among all the membranes with biochar. Ultimately, this study highlighted potential tradeoffs between functional performance and global environmental impacts regarding choices for membrane fabrication.