Probing Mechanical Properties Research Articles

Spiderwebs in the physics classroom

Students make rubber band spiderweb replicas to probe mechanical properties.

Reverberant optical coherence elastography using multifocal acoustic radiation force.

In this study, we introduce a multifocal acoustic radiation force source that combines an ultrasound transducer and a 3D-printed acoustic lens for application in reverberant optical coherence elastography (Rev-OCE). An array of plano-concave acoustic lenses, each with an 11.8 mm aperture diameter, were used to spatially distribute the acoustic energy generated by a 1 MHz planar ultrasound transducer, producing multiple focal spots on a target plane. These focal spots generate reverberant shear wave fields detected by the optical coherence tomography (OCT) system. The effectiveness of the multifocal Rev-OCE system in probing mechanical properties with high resolution is demonstrated in layered gelatin phantoms.

Quantitative biomechanics using reverberant optical coherence elastography

In this presentation, I will introduce and discuss recent developments in our effort for quantitative biomechanics of tissues and organs using a multifocal acoustic radiation force source (that combines an ultrasound transducer and a 3D-printed acoustic lens) in reverberant optical coherence elastography (Rev-OCE). An array of plano-concave acoustic lenses, each with an 11.8 mm aperture diameter, were used to spatially distribute the acoustic energy generated by a 1 MHz planar ultrasound transducer, producing multiple focal spots on a target plane. These focal spots generate reverberant shear wave fields detected by the Optical Coherence Tomography (OCT) system. The effectiveness of the multifocal Rev-OCE system in probing mechanical properties with high resolution is demonstrated in layered gelatin phantoms, tissues ex vivo, and whole mouse embryos in vivo.

Indentation of pore-spanning lipid membranes: Spring-stiffening or -softening responses and apparent stiffness prediction

Atomic force microscopy (AFM)-based nanoindentation has emerged as a key nanomechanical mapping method to probe mechanical properties of two-dimensional engineering and biological materials. In comparison with extensive analytical studies on the indentation of freestanding solid thin films, surprisingly little attention has been drawn on analytical predictions of mechanical responses of freestanding lipid membranes to indentation in the framework of Helfrich membrane theory. Here we perform systematic theoretical studies with formulated analysis on indentation of nanopore-spanning lipid membranes. Two types of lipid membranes are considered. One is the membrane subject to uniform area stretching and the membrane is found to exhibit a spring-stiffening behavior during indentation, while the other is the membrane of constant tension and a spring-softening behavior at intermediate indentation is exhibited. The smaller the membrane tension is, the clearer the spring-softening feature is. For both types of membranes, analytical solutions of load–depth relationship at small indentation and apparent membrane stiffnesses are obtained at small and large tension. For the stretched lipid membranes, a cubic nonlinearity arising from membrane stretching is specified. Roles of membrane bending rigidity, (pre-)tension, or area compression modulus, and indenter size in membrane indentation are elucidated. Moreover, pressure of contact between the membrane and indenter and a line load of contact acting along the contact edge are obtained based on the shell theory. Our results provide fundamental insights on nonlinear mechanical behaviors of the lipid membrane indentation.

Mechanical characterization of piezoelectric materials: A perspective on deformation behavior across different microstructural length scales

Piezoelectric materials (PEMs) find a wide spectrum of applications that include, but are not limited to, sensors, actuators, semiconductors, memory devices, and energy harvesting systems due to their outstanding electromechanical and polarization characteristics. Notably, these PEMs can be employed across several length scales (both intrinsic and extrinsic) ranging from mesoscale (bulk ceramics) to nanoscale (thin films) during their applications. Over the years, progress in probing individual electrical and mechanical properties of PEM has been notable. However, proportional review articles providing the mechanical characterization of PEM are relatively few. The present article aims to give a tutorial on the mechanical testing of PEMs, ranging from the conventional bulk deformation experiments to the most recent small-scale testing techniques from a materials science perspective. The advent of nanotechnology has led materials scientists to develop in situ testing techniques to probe the real-time electromechanical behavior of PEMs. Therefore, this article presents a systematic outlook on ex situ and in situ deformation experiments in mechanical and electromechanical environments, related mechanical behavior, and ferroelectric/elastic distortion during deformation. The first part provides significant insights into the multifunctionality of PEM and various contributing microstructural length scales, followed by a motivation to characterize the mechanical properties from the application's point of view. In the midst, the mechanical behavior of PEM and related mechanical characterization techniques (from mesoscale to nanoscale) are highlighted. The last part summarizes current challenges, future perspectives, and important observations.

Quantum-enhanced stimulated Brillouin scattering spectroscopy and imaging.

Brillouin microscopy is an emerging label-free imaging technique used to assess local viscoelastic properties. Quantum-enhanced stimulated Brillouin scattering is demonstrated using low power continuous-wave lasers at 795 nm. A signal-to-noise ratio enhancement of 3.4 dB is reported by using two-mode intensity-difference squeezed light generated with the four-wave mixing process in atomic rubidium vapor. The low optical power and the excitation wavelengths in the water transparency window have the potential to provide a powerful bio-imaging technique for probing mechanical properties of biological samples prone to phototoxicity and thermal effects. The performance enhancement affordable through the use of quantum light may pave the way for significantly improved sensitivity that cannot be achieved classically. The proposed method for utilizing squeezed light for enhanced stimulated Brillouin scattering can be easily adapted for both spectroscopic and imaging applications in biology.

Deformation mechanisms in single crystal Ni-based concentrated solid solution alloys by nanoindentation

Nanoindentation is a critical technique to probe mechanical properties at the micrometer and sub-micrometer scales, accompanied by challenges from indentation size effect, pile-up/sink-in effect, and strain rate sensitivity. In this study, different nanoindentation techniques have been employed to explore Ni-based concentrated solid solution alloys (CSAs) with the addition of 3d transition metal elements including Co, Cr, Mn, and Fe, including unique single-crystal Ni, NiCo, NiFe, Ni80Cr20, and NiCoFeCr samples with (100) surfaces. A procedure of nanoindentation tests and data analysis/correction have been developed, and a data set of hardness, elastic modulus, strain rate sensitivity, and activation volume for Ni-based CSAs are provided, including the less explored binary alloys such as Ni80Cr20 and Ni80Mn20. The results show that the type of alloying elements is more critical than the number of elements in strengthening: Co does not provide strengthening in NiCo, while Cr, Mn, and Fe are effective strengthening elements. Cr is the most effective among all the 3d transition metal elements. Furthermore, atomic-level lattice distortion is responsible for the strengthening and the role of stacking fault energy is insignificant in Ni-based CSAs at room temperature. In summary, nanoindentation shows increasing promise as a reliable and fast tool to provide comprehensive mechanical information for new alloy design and development.

Arterial Stiffness Probed by Dynamic Ultrasound Elastography Characterizes Waveform of Blood Pressure.

The clinical and economic burdens of cardiovascular diseases pose a global challenge. Growing evidence suggests an early assessment of arterial stiffness can provide insights into the pathogenesis of cardiovascular diseases. However, it remains difficult to quantitatively characterize local arterial stiffness in vivo. Here we utilize guided axial waves continuously excited and detected by ultrasound to probe local blood pressures and mechanical properties of common carotid arteries simultaneously. In a pilot study of 17 healthy volunteers, we observe a ∼20 % variation in the group velocities of the guided axial waves (5.16 ± 0.55 m/s in systole and 4.31 ± 0.49 m/s in diastole) induced by the variation of the blood pressures. A linear relationship between the square of group velocity and blood pressure is revealed by the experiments and finite element analysis, which enables us to measure the waveform of the blood pressures by the group velocities. Furthermore, we propose a wavelet analysis-based method to extract the dispersion relations of the guided axial waves. We then determined the shear modulus by fitting the dispersion relations in diastole with the leaky Lamb wave model. The average shear modulus of all the volunteers is 166.3 ± 32.8 kPa. No gender differences are found. This study shows the group velocity and dispersion relation of the guided axial waves can be utilized to probe blood pressure and arterial stiffness locally in a noninvasive manner and thus promising for early diagnosis of cardiovascular diseases.

Experimental evidence of auxeticity in ion implanted single crystal calcite

We report initial experimental evidence of auxeticity in calcite by ion implanting (1010) oriented single crystalline calcite with Ar+ at room temperature using an ion energy of 400 keV and a dose of 1 × 1014 cm−2. Lattice compression normal to the substrate surface was observed, which is an atypical result for ion implanted materials. The auxetic behavior is consistent with predictions that indicate auxeticity had been predicted along two crystallographic directions including [1010]. Materials with a positive Poisson’s ratio experience lattice expansion normal to the substrate surface when ion implanted, whereas lattice contraction normal to the surface is evidence of auxetic behavior. Triple-axis X-ray diffraction measurements confirmed the auxetic strain state of the implanted calcite substrates. Reciprocal space maps for the symmetric 3030 and asymmetric 1450 reflections revealed that the implanted region was fully strained (pseudomorphic) to the bulk of the substrate, as is typical with implanted single crystals. A symmetric (3030) ω:2θ line scan was used with X-ray dynamical diffraction simulations to model the strain profile and extract the variation of compressive strain as a function of depth normal to the substrate surface. SRIM calculations were performed to obtain a displacement-per-atom profile and implanted Ar+ concentration profile. It was found that the strain profile matches the displacement-per-atom profile. This study demonstrated the use of ion implantation and X-ray diffraction methods to probe mechanical properties of materials and to test predictions such as the auxeticity.

Rapid evaporative ionization mass spectrometry (intelligent knife) for point-of-care testing in acute aortic dissection surgery.

OBJECTIVESRapid evaporative ionization mass spectrometry (REIMS) can discriminate aneurysmal from normal aortic tissue. Our objective in this work was to probe the integrity of acute dissection tissue using biomechanical, biochemical and histological techniques and demonstrate that REIMS can be used to discriminate identified differences.METHODSHuman aortic tissue was obtained from patients undergoing surgery for acute aortic dissection. Biomechanical, biochemical and histological assessment was carried out to probe mechanical properties and elastin, collagen and glycosaminoglycan composition of the tissue. Monopolar electrocautery was applied to samples and surgical aerosol aspirated and analysed by REIMS to produce mass spectral data.RESULTSTissue was obtained from 10 patients giving rise to 26 tissue pieces: 10 false lumen (FL), 10 dissection flap and 6 true lumen samples. Models generated from biomechanical and biochemical data showed that FL tissue was distinct from true lumen and dissection flap tissue. REIMS identified the same pattern being able to classify tissue types with 72.4% accuracy and 69.3% precision. Further analysis of REIMS data for FL tissue suggested patients formed 3 distinct clusters. Histological and biochemical assessment revealed patterns of extracellular matrix degradation within the clusters that are associated with altered tissue integrity identified using biomechanical testing.CONCLUSIONSStructural integrity of the FL in acute Type A dissection could dictate future clinical distal disease progression. REIMS can detect differences in tissue integrity, supporting its development as a point-of-care test to guide surgical intraoperative decision-making.

Sounding a New Era in Biomechanics with Acoustic Force Spectroscopy.

The acoustic force spectroscopy (AFS) tool was recently introduced as a novel tool for probing mechanical properties of biomolecules, expanding the application of sound waves to high-throughput quantification of the mechanical properties of single cells. By using controlled acoustic forces in the piconewton to nanonewton range, tens to hundreds of cells functionalized by attached microspheres can simultaneously be stretched and tracked in real-time with sub millisecond time response. Since its first application, several studies have demonstrated the potential and versatility of the AFS for high-throughput measurements of force-induced molecular mechanisms, revealing insight into cellular biomechanics and mechanobiology at the molecular level. In this chapter, we describe the operation of the AFS starting with the underlying physical principles, followed by a run-down of experimental considerations, and finally leading to applications in molecular and cellular biology.

Anomalous solid-like necking of confined water outflow in hydrophobic nanopores

<h2>Summary</h2> Intrusion of liquid into hydrophobic nanopores has yielded unusual fluid and transport properties that classical theories cannot fully describe, and its extrusion yet remains largely mysterious. Here, we report that the outflow of confined water from hydrophobic nanopores exhibits an anomalous necking phenomenon followed by its breaks, similar to that of solid metal nanowires under uniaxial tension. Molecular dynamics simulations reveal that this solid-like behavior attributes to strong cohesions of water molecules and nanoporous confinements associated with hydrogen-bonding networks and dipole alignments. The extracted elastic modulus and failure strength are quantitatively described by establishing solid-like mechanics scaling laws of outflow deformation and strength. Quasistatic experiments on hydrophobic nanopores/water systems were performed and confirmed the scaling laws of both outflow deformation and strength in remarkable agreement with theoretical predictions. This study offers a facile route for probing mechanical and structural properties of nanoconfined liquid by leveraging its unprecedented solid-like outflow behavior.

Genome information processing by the INO80 chromatin remodeler positions nucleosomes

The fundamental molecular determinants by which ATP-dependent chromatin remodelers organize nucleosomes across eukaryotic genomes remain largely elusive. Here, chromatin reconstitutions on physiological, whole-genome templates reveal how remodelers read and translate genomic information into nucleosome positions. Using the yeast genome and the multi-subunit INO80 remodeler as a paradigm, we identify DNA shape/mechanics encoded signature motifs as sufficient for nucleosome positioning and distinct from known DNA sequence preferences of histones. INO80 processes such information through an allosteric interplay between its core- and Arp8-modules that probes mechanical properties of nucleosomal and linker DNA. At promoters, INO80 integrates this readout of DNA shape/mechanics with a readout of co-evolved sequence motifs via interaction with general regulatory factors bound to these motifs. Our findings establish a molecular mechanism for robust and yet adjustable +1 nucleosome positioning and, more generally, remodelers as information processing hubs that enable active organization and allosteric regulation of the first level of chromatin.

Mechanical Characterization for Cellular Mechanobiology: Current Trends and Future Prospects.

Accurate mechanical characterization of adherent cells and their substrates is important for understanding the influence of mechanical properties on cells themselves. Recent mechanobiology studies outline the importance of mechanical parameters, such as stress relaxation and strain stiffening on the behavior of cells. Numerous techniques exist for probing mechanical properties and it is vital to understand the benefits of each technique and how they relate to each other. This mini review aims to guide the reader through the toolbox of mechanical characterization techniques by presenting well-established and emerging methods currently used to assess mechanical properties of substrates and cells.

Unveiling the impact of embedding resins on the physicochemical traits of wood cell walls with subcellular functional probing

As pressing needs for exploring molecular interactions in plants soar, conventional sample preparation methods come into question. Though resins used to embed plant tissues have long been assumed to bear no palpable effect on their properties, discrepancies in recent studies exploiting nanoscale microscopy suggest that their impact could be significant at small scales. By juxtaposing the traits of poplar sections prepared with and without embedding, we evaluate the diffusion (penetration depth) of acrylic and epoxy resins commonly used for embedding. Our results unveil critical quantitative differences when probing mechanical properties with a microscale nanoindentation indenter or a nanoscale tip. The latter resolves significant stiffness variations between the compound middle lamellae, the secondary cell wall layers S1 and S2, and the cell corner, not accessible with nanoindentation. Similar observations are drawn from comparing confocal Raman and nanoscale infrared spectroscopy. Our findings shed light on the effect of resin diffusion suggesting acrylic LR White to be the least diffusive for plant cell wall studies.

Influence of Drawing Velocity on the Inner Quality of Single-Crystal Superalloy

This study investigates the inner quality including microdefects, orientation deviation and dendrite spacing of DD6 single-crystal superalloy with different drawing velocities. The XRD, SEM, electron probe microanalyzer methods and mechanical properties were used to evaluate the defects and microstructures, related to their evolution mechanism in DD6 superalloy. It was found that the drawing velocity of 80 μm/s can obtain a 4° deviation angle from the 〈001〉 orientation, less microdefects and well tensile properties. With drawing velocity increasing from 30 to 150 μm/s, PDAS decreases from 471 to 359 μm, respectively. Moreover, the shrinkage porosity decreases firstly and then increases due to different feeding conditions. In addition, the segregation of the solute elements increases and promotes the content of γ/γ′ eutectic, which deteriorate the mechanical properties. The research results can provide a basis for the development of high-quality single-crystal blades.

Probing the compound effect of spatially varying intrinsic defects and doping on mechanical properties of hybrid graphene monolayers

Doping in pristine 2D materials brings about the advantage of modulating wide range of mechanical properties simultaneously. However, intrinsic defects (such as Stone-Wales and nanopore) in such hybrid materials are inevitable due to complex manufacturing and synthesis processes. Besides that, defects and irregularities can be intentionally induced in a pristine nanostructure for multi-synchronous modulation of various multi-functional properties. Whatever the case may be, in order to realistically analyse a doped graphene sheet, it is of utmost importance to investigate the compound effect of doping and defects in such 2D monolayers. Here we present a molecular dynamics based investigation for probing mechanical properties (such as Young’s modulus, post-elastic behaviour, failure strength and strain) of doped graphene (C14 and Si) coupling the effect of inevitable defects. Spatial sensitivity of defect and doping are systematically analyzed considering different rational instances. The study reveals the effects of individual defects and doping along with their possible compounded influences on the failure stress, failure strain, Young’s modulus and constitutive relations beyond the elastic regime. Such detailed mechanical characterization under the practically relevant compound effects would allow us to access the viability of adopting doped graphene in various multifunctional nanoelectromechanical devices and systems in a realistic situation.

Quantitative Modeling of Nucleosome Unwrapping from Both Ends

In eukaryotic cells, DNA is packaged into chromatin where nucleosomes are the basic packaging unit. Important cellular processes including gene expression, DNA replication, and DNA repair require nucleosomal DNA to be unwrapped so that functional proteins can access their target sites, which otherwise are sterically occluded. A key question in this process is what the unwrapped conformations individual nucleosomes adopt within chromatin are. Here, we develop a concurrent nucleosome unwrapping model to address this question. We hypothesize that for a given end-to-end distance of the nucleosomal DNA, the nucleosomal DNA stochastically unwraps from the histone core from both ends independently and that this combination of unwrapping from both sides results in a significant increase in the average distance between the DNA extending from both sides of the nucleosomes. We test our model on recently published experiments using a DNA origami nanocaliper that quantifies nucleosome unwrapping and achieve good agreement between experiment and model prediction. We then investigate the DNA origami caliper distribution when attached to a hexasome (a nucleosome lacking an H2A/H2B dimer). A significant shift in the caliper angle distribution caused by the asymmetric structural features of the hexasome seen experimentally is consistent with the model. Our modeling approach may be more broadly useful to the interpretation of other studies of nucleosome dynamics, chromatin dynamics, and regulatory processes involving nucleosome unwrapping, as well as more generally to optimization of future DNA origami designs to probe mechanical properties of biomolecules.

Evaluation of Mechanical Properties with Tool Rotational Speed in Dissimilar Cast Aluminum and High-Strength Steel of Lap Jointed Friction Stir Welding

Recently, friction stir welding of dissimilar materials are one of the biggest issues in terms of light-weight and eco-friendly technology of the automotive, aircraft and ship industry. In this study, friction stir welding of dissimilar materials is introduced with different tool rotational speed. Materials used in experimentation consist of A357 gravity cast aluminum alloy and FB590 high-strength steel plates. Dissimilar materials of plate type are fabricated with width of 150㎜, length of 300mm and thickness of 3㎜ and welding is carried out by the lap joint method. The correlation between probe length and mechanical properties were investigated according to rotational speed and welding speed at tool tilt angle 0 degree. Consequently, feasibility of FSWed dissimilar materials were successfully presented in case of cast aluminum and high-strength steel at lap joint method.

Statistical Mechanics of an Elastically Pinned Membrane: Equilibrium Dynamics and Power Spectrum

In biological settings, membranes typically interact locally with other membranes: the extracellular matrix in the exterior or internal cellular structures such as the cytoskeleton, locally pinning the membrane. Characterizing the dynamical properties of such interactions presents a difficult task. Significant progress has been achieved through simulations and experiments, yet analytical progress in modeling pinned membranes has been impeded by the complexity of governing equations. Here, we circumvent these difficulties by calculating analytically the time-dependent Green’s function of the operator governing the dynamics of an elastically pinned membrane in a hydrodynamic surrounding and subject to external forces. This enables us to calculate the equilibrium power spectral density for an overdamped membrane pinned by an elastic, permanently attached spring subject to thermal excitations. By considering the effects of the finite experimental resolution on the measured spectra, we show that the elasticity of the pinning can be extracted from the experimentally measured spectrum. Membrane fluctuations can thus be used as a tool to probe mechanical properties of the underlying structures. Such a tool may be particularly relevant in the context of cell mechanics, in which the elasticity of the membrane’s attachment to the cytoskeleton could be measured.