Probe Melting Research Articles

Analyte and probe melting temperature guided method development strategy for hybridization LC-MS/MS quantification of siRNAs

Small interfering RNA (siRNA) is a novel class of double-stranded oligonucleotide therapeutics rapidly growing in drug research and development. Accurate, sensitive, and reliable quantification of siRNA analytes in biological samples is required to study their pharmacokinetics, toxicokinetics, and biodistribution. Hybridization LC-MS/MS can achieve highly sensitive and specific bioanalysis of single-stranded oligonucleotides, e.g., antisense oligonucleotides (ASOs); however, its application for bioanalysis of siRNA or other double-stranded oligonucleotides is limited. The detailed rationale and principles for assay development are still not well understood. In this work, we systematically evaluated key steps and parameters of hybridization LC-MS/MS assays, including probes (five different types compared), hybridization procedure and temperature, elution temperature, and column temperature using patisiran, an approved siRNA drug, as the test siRNA. Based on the evaluation, a practical and efficient melting temperature (Tm) guided strategy was developed for fast and reliable method development of hybridization LC-MS/MS assays for siRNA bioanalysis. The strategy was successfully applied to siRNA-A, a test siRNA, in mouse plasma over the range of 1.00–1000 ng/mL and the resulting method has been used to support multiple mouse studies. This method-development strategy showed great value as a general approach for other siRNAs or double-stranded oligonucleotides.

Evaluation of the FPMC respiratory panel for detection of respiratory tract pathogens in nasopharyngeal swab and sputum specimens

ObjectivesThe performance of the new Respiratory Pathogen panel (fluorescent probe melting curve, FPMC) for the qualitative detection of 12 organisms (chlamydia pneumoniae, mycoplasma pneumoniae, adenovirus, influenza A virus, influenza B virus, parainfluenza virus, rhinovirus, etc.) was assessed.MethodsProspectively collected nasopharyngeal swab (NPS) and sputum specimens (n = 635) were detected by using the FPMC panel, with the Sanger sequencing method as the comparative method.ResultsThe overall percent concordance between the FPMC analysis method and the Sanger sequencing method was 100% and 99.66% for NPS and sputum specimens, respectively. The FPMC testified an overall positive percent concordance of 100% for both NPS and sputum specimens. The FPMC analysis method also testified an overall negative percent concordance of 100% and 99.38% for NPS and sputum specimens, respectively.ConclusionsThe FPMC analysis method is a stable and accurate assay for rapid, comprehensive detecting for respiratory pathogens.

<i>LINE-1</i> hypomethylation and <i>HIST1H4F</i> hypermethylation as oncomarkers in liquid biopsy of colorectal cancer

Introduction. Local hypermethylation of gene promoters and global genome hypomethylation are well-known manifestations of aberrant methylation associated with carcinogenesis. We investigated this phenomenon as a possible diagnostic marker for liquid biopsy of colorectal cancer using the original quantitative DNA melting analysis with hybridiza-tion probes (qDMA-HP) method. Aim. To quantify the methylation of HIST1H4F promoter and LINE-1 transposon in circulating blood plasma DNA of colorectal cancer patients. Materials and methods. Bisulfite-treated DNA samples isolated from blood plasma of healthy donors and cancer patients were analyzed. HIST1H4F methylation was assessed by asymmetric polymerase chain reaction with hybridized probe and post-amplification melting of probe / amplicon hybrids. To test for repetitive and highly polymorphic LINE-1 sequences, asymmetric polymerase chain reaction with hybridized probe and SYBR Green intercalating dye was used, followed by melting of hybrids and analysis of multicomponent melt curves. Results. High diagnostic efficiency of LINE-1 and HIST1H4F methylation markers in liquid biopsy of colorectal cancer was demonstrated with the area under the ROC curve = 0.92, sensitivity – 100 %, specificity – 84 %. Cross validation supports this result. Hypermethylation of HIST1H4F and hypomethylation of LINE-1 are statistically significantly correlated (Spearman correlation coefficient r = 0.4; p = 0.01). Conclusion. The qDMA-HP is suitable for quantitative assessment of aberrant methylation of various clinically significant genes.

Melting trajectory of the asymmetrically-heated conical thermal head for ice-melting probes

The development of ice-melting probes is driven by the scientific need to explore the subglacial aquatic environments, such as the subglacial lakes in Antarctica and subglacial water on some extraterrestrial planets. However, during the downward melting, a deviation of the melting trajectory might occur. If left unaddressed, the accumulated deviation will eventually lead to missing the probe's target. Therefore, it is necessary to build a theoretical model to describe the deviation for predicting the future melting trajectory and building the deviation correction system. The deviation comes from any asymmetric heating condition on the melting head. Generally, the Close-Contact Melting (CCM) theory is used to model the probe's melting process without any deviation, and there is only one attempt so far that applies the CCM theory to asymmetric heating conditions. Based on this initial attempt, we successfully expanded the CCM theory with asymmetric temperature profiles to conical thermal heads. Additionally, we simplified the model solving which leads to fewer influence factors compared to existing studies. The model indicates that the melting trajectory of a conical head is linear under asymmetric heating conditions, and the inclination angle of the trajectory is related to the ratio between the head's temperatures on each side and the head's cone angle. To validate the theoretical results, laboratory experiments have also been conducted with an innovative optical positioning method.

Screening results and mutation frequency analysis of G6PD deficiency in 1,291,274 newborns in Huizhou, China: a twenty-year experience.

This study aimed to investigate the incidence rate and spectrum of gene mutations of Glucose-6-phosphate dehydrogenase (G6PD) deficiency in the Huizhou city of southern China to provide a scientific basis for disease prevention and control in the area. From March 2003 to December 2022, newborn screening for G6PD enzyme activity was carried out in Huizhou city using the fluorescence quantitative method. Infants who tested positive during the initial screening were diagnosed using the nitroblue tetrazolium ratio method, while a subset of infants received further gene mutation analysis using the multicolor probe melting curve analysis method. A total of 1,291,274 newborns were screened and the screening rate has increased from 20.39% to almost 100%. In the 20-year period, 57,217 (4.43%) infants testing positive during the initial screening. Out of these infants, 49,779 (87%) were recalled for confirmatory testing. G6PD deficiency was confirmed in 39,261 of the recalled infants, indicating a positive predictive value of 78.87%. The estimated incidence rate of G6PD deficiency in the region was 3.49%, which was significantly higher than the average incidence rate of 2.1% in southern China. On the other hand, seven pathogenic G6PD variants were identified in the analysis of the 99 diagnosed infants with the most common being c.1388 G > A (48.5%), followed by c.95 A > G (19.2%), c.1376 G > T (15.2%), c.871 G > A (9.1%), c.1360 C > T (3.0%), c.392 G > T (3.0%), and c.487 G > A (1.0%). The incidence of G6PD deficiency in newborns in the Huizhou city was higher than the southern China average level, while the types and frequencies of gene mutations were found to vary slightly from other regions. Our findings suggested that free government screening and nearby diagnosis strategies could reduce the incidence of G6PD deficiency in the area.

Clinical value of the MeltPro MTB assays in detection of drug-resistant tuberculosis in paraffin-embedded tissues

Objective: To evaluate the clinical value of the MeltPro MTB assays in the diagnosis of drug-resistant tuberculosis. Methods: A cross-sectional study design was used to retrospectively collect all 4 551 patients with confirmed tuberculosis between January 2018 and December 2019 at Beijing Chest Hospital, Capital Medical University. Phenotypic drug sensitivity test and GeneXpert MTB/RIF (hereafter referred to as "Xpert") assay were used as gold standards to analyze the accuracy of the probe melting curve method. The clinical value of this technique was also evaluated as a complementary method to conventional assays of drug resistance to increase the detective rate of drug-resistant tuberculosis. Results: By taking the phenotypic drug susceptibility test as the gold standard, the sensitivity of the MeltPro MTB assays to detect resistance to rifampicin, isoniazid, ethambutol and fluoroquinolone was 14/15, 95.7%(22/23), 2/4 and 8/9,respectively; and the specificity was 92.0%(115/125), 93.2%(109/117), 90.4%(123/136) and 93.9%(123/131),respectively; the overall concordance rate was 92.1%(95%CI:89.6%-94.1%),and the Kappa value of the consistency test was 0.63(95%CI:0.55-0.72).By taking the Xpert test results as the reference, the sensitivity of this technology to the detection of rifampicin resistance was 93.6%(44/47), the specificity was100%(310/310), the concordance rate was 99.2%(95%CI:97.6%-99.7%), and the Kappa value of the consistency test was 0.96(95%CI:0.93-0.99). The MeltPro MTB assays had been used in 4 551 confirmed patients; the proportion of patients who obtained effective drug resistance results increased from 83.3% to 87.8%(P<0.01); and detection rate of rifampicin, isoniazid, ethambutol, fluoroquinolone resistance, multidrug and pre-extensive drug resistance cases were increased by 3.2%, 14.7%, 22.2%, 13.7%, 11.2% and 12.5%, respectively. Conclusion: The MeltPro MTB assays show satisfactory accuracy in the diagnosis of drug-resistant tuberculosis. This molecular pathological test is an effective complementary method in improving test positivity of drug-resistant tuberculosis.

A laser powder bed fusion system for operando synchrotron x-ray imaging and correlative diagnostic experiments at the Stanford Synchrotron Radiation Lightsource.

Laser powder bed fusion (LPBF) is a highly dynamic multi-physics process used for the additive manufacturing (AM) of metal components. Improving process understanding and validating predictive computational models require high-fidelity diagnostics capable of capturing data in challenging environments. Synchrotron x-ray techniques play a vital role in the validation process as they are the only in situ diagnostic capable of imaging sub-surface melt pool dynamics and microstructure evolution during LPBF-AM. In this article, a laboratory scale system designed to mimic LPBF process conditions while operating at a synchrotron facility is described. The system is implemented with process accurate atmospheric conditions, including an air knife for active vapor plume removal. Significantly, the chamber also incorporates a diagnostic sensor suite that monitors emitted optical, acoustic, and electronic signals during laser processing with coincident x-ray imaging. The addition of the sensor suite enables validation of these industrially compatible single point sensors by detecting pore formation and spatter events and directly correlating the events with changes in the detected signal. Experiments in the Ti-6Al-4V alloy performed at the Stanford Synchrotron Radiation Lightsource using the system are detailed with sufficient sampling rates to probe melt pool dynamics. X-ray imaging captures melt pool dynamics at frame rates of 20 kHz with a 2 µm pixel resolution, and the coincident diagnostic sensor data are recorded at 470 kHz. This work shows that the current system enables the in situ detection of defects during the LPBF process and permits direct correlation of diagnostic signatures at the exact time of defect formation.

148. Single-amplicon, Multiplex Real-time RT-PCR with Tiled Probes to Detect SARS-CoV-2 spike Mutations Associated with Variants of Concern

BackgroundDetection and surveillance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants is of great public health importance. Broadly accessible and inexpensive assays are needed to enhance variant surveillance and detection globally. We developed and validated a single-reaction multiplex real-time RT-PCR (the Spike SNP assay) to detect specific mutations associated with variants of concern (VOC).MethodsA single primer pair was designed to amplify a 348 bp region of spike. Probes were initially designed with locked nucleic acids (LNAs) to increase probe melting temperature, shorten probe length, and specifically detect 417K, E484K, and N501Y (Figure). The assay was optimized and evaluated using characterized variant sample pools. Clinical evaluation was performed on a convenience set of residual nasopharyngeal swabs, and variant calls were confirmed by SARS-CoV-2 genomic sequencing in a subset of samples. Following the initial evaluation, unmodified probes (without LNAs) were designed to detect L452R, L452Q, and E484Q.Figure. Spike SNP distinguishes mutations occurring in different lineages (A-C). Representative results of variant detection a single Spike SNP run are shown for mutations in the codons for 4177K (A) and mutations that encode 484K (B) and 501Y (C). Curves show dilutions of the following variants: blue, BEI 52286 (wild type); pink B.1.1.7; purple, B1.525; and green, P.1. Variant pools were used for B.1.17, B.1.525, and P.1 strains. Curves are displayed for a given dilution in each channel and result interpretation is shown (D).ResultsThe lower limit of 95% detection was 2.46 to 2.48 log10 GE/mL for the three targets (~1-2 GE/reaction). Among 253 nasopharyngeal swabs with detectable SARS-CoV-2 RNA, the Spike SNP assay was positive in 238 (94.1%), including all samples with Ct values < 30 (220/220) for the N2 target and 18/33 samples with N2 Ct values ≥ 30. Results were confirmed by SARS-CoV-2 genomic sequencing in 50/50 samples (100%). Subsequent addition of the 452R probe did not affect performance for the original targets, and probes for 452Q and 484Q performed similarly to LNA-modified probes.ConclusionThe Spike SNP assay provides fast, inexpensive and sensitive detection of specific mutations associated with SARS-CoV-2 VOCs, and the assay can be quickly modified to detect new mutations in the receptor binding domain. Similar analytical performance of LNA-modified and unmodified probes presents options for future assay customization that balance the shorter probe length (LNAs) and increased accessibility (unmodified). The Spike SNP assay, if implemented across laboratories offering SARS-CoV-2 testing, could greatly increase capacity for variant detection and surveillance globally. Disclosures Colleen S. Kraft, MD, MSc, Rebiotix (Individual(s) Involved: Self): Advisor or Review Panel member

A Novel Molecular Method for Simultaneous Identification of Vibrio parahaemolyticus 57 K-Serogroups Using Probe Melting Curve Analysis.

The serotyping of Vibrio parahaemolyticus, which is crucial to the surveillance and detection of outbreaks of vibriosis infection, has been widely used in many countries. In this study, we developed a molecular assay, named multiplex ligation reaction based on probe melting curve analysis (MLMA), for simultaneous identification of V. parahaemolyticus 57 K-serogroups. Based on the previous genomes of 418 strains including 39 K-serogroups and the 18 K-serogroups sequences from public databases, we obtained 57 K-serogroups specific gene sequences for designing primers and probes. The developed MLMA assay for identifying the V. parahaemolyticus 57 K-serogroups showed high reproducibility, with the intra- and inter-assay standard deviations and coefficients of variation of no more than 1°C and 1%, respectively. The limit of detection for all gene targets ranged from 0.1 to 1.0 ng/µl. We validated the MLMA assay with a double-blind test identifying 595 V. parahaemolyticus isolates using conventional serotyping methods for comparison. The results showed the kappa value between the MLMA assay and the traditional serological method was 0.936 and that there was a 96.97% consistency rate with conventional serotyping methods for all detected isolates. Additionally, five rare K-serogroups were identified using the MLMA assay, as well as 18 strains that could not be identified using the traditional serotyping method. Thus, the MLMA assay provides a rapid, robust, and promising tool for the molecular serotyping of V. parahaemolyticus K-serogroups and has the potential application to the detection of outbreaks and surveillance of V. parahaemolyticus infection.

Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction

Metal parts produced by laser powder bed fusion (LPBF) additive manufacturing exhibit characteristic microstructures comparable to those observed in laser welding. The primary cause of this characteristic microstructure is rapid, localized heating and cooling cycles, which result in extreme thermal gradients where material solidification is followed by fast cooling in the solid state. The final microstructure and mechanical performance are also influenced by pore formation caused by melt pool fluid dynamics. Here, we use high speed, in situ X-ray diffraction to probe the kinetics of cooling and solid-solid phase transitions after laser melting in two aerospace titanium alloys: Ti-6Al-4V, an α + β alloy; and Ti-5Al-5V-5Mo-3Cr, a near-β alloy. We complement these diffraction studies with in situ X-ray imaging to probe melt pool dynamics and pore formation. From these two complementary probes, we quantify pore formation during melting and the subsequent microstructural evolution as the material rapidly cools after solidification. These results are critical for understanding defect formation and residual stress development in different titanium alloys under LPBF conditions and can help inform process models to predict final part performance.

Detection of tuberculosis genes associated with drug-resistance in paraffin-embedded tissue specimens using next generation sequencing technology

Objective: To evaluate the use of multiplex PCR amplicon sequencing (mPCR-NGS) technology in detecting gene mutations related to drug resistance of Mycobacterium tuberculosis (MTB) in formalin-fixed paraffin-embedded tissue specimens, and to explore its clinical value in the diagnosis of drug-resistant tuberculosis. Methods: Fifty clinical MTB strains isolated in the Changping District Tuberculosis Control Institute of Beijing from April 2013 to October 2015 with drug susceptibility test (DST) results of rifampicin, isoniazid, ethambutol, streptomycin, ofloxacin, capreomycin, kanamycin and amikacin available were recovered, including 42 drug-resistant strains and 8 drug-sensitive strains. The mPCR-NGS test was established to detect genes related to the 8 anti-tuberculosis drugs according to the previously published studies and databases. Fifty-five paraffin-embedded tissue specimens from drug-resistant tuberculosis patients were collected in the Department of Pathology, Beijing Chest Hospital, Capital Medical University during November 2017 to September 2018. All the specimens showed no less than one mutation in the gene regions related to drug resistance of any of the 4 drugs (rifampicin, isoniazid, ethambutol or fluoroquinolones) by probe melting curve assay. The effectiveness of mPCR-NGS test was evaluated on clinical MTB isolates using phenotypic DST as the reference. Clinical evaluation of mPCR-NGS test on formalin-fixed paraffin-embedded specimens from TB patients was performed using probe melting curve assay as the reference. The sensitivity, specificity and coincidence of mPCR-NGS were analyzed. Results: Using phenotypic DST as the reference, the sensitivities of the mPCR-NGS for detecting drug-resistance of rifampicin, isoniazid, streptomycin, and ethambutol were 95% (38/40), 93% (27/29), 93% (27/29), and 72% (13/18), respectively; and the specificities were 100% (10/10), 95% (20/21), 100% (21/21), and 94% (30/32), respectively. The sensitivities for capreomycin, kanamycin and amikacin were all 100% (2/2, 3/3, 3/3), and the specificities were 98% (47/48), 100% (33/33) and 100% (47/47), respectively. The sensitivity and specificity of ofloxacin were 70% (7/10) and 100% (40/40), respectively. The total coincidence rate for the 8vdrugs was 94%, and the Kappa value was 0.87. The 55 paraffin-embedded tissue specimens included in this study were all tested by probe melting curve assays. Among them 28 were resistant to rifampicin, 37 resistant to isoniazid, 13 resistant to ethambutol, and 17 resistant to fluoroquinolones. Using the probe melting curve assay as the reference, the sensitivities of the mPCR-NGS for detecting resistant to rifampicin, isoniazid, ethambutol, and fluoroquinolones were 100% (28/28), 95% (35/37), 100%, and 100%, respectively; and the specificities were all 100% (42/42, 38/38). The total coincidence rate of the two methods was 99%, and the Kappa value was 0.98. Conclusions: mPCR-NGS showed good sensitivities and specificities in detecting drug-resistant gene mutations both in clinical MTB isolates and paraffin-embedded tissue specimens. mPCR-NGS has the potential to be an accurate and rapid molecular pathological technology for diagnosis of drug-resistant tuberculosis.

Multiplex ligation reaction based on probe melting curve analysis: a pragmatic approach for the identification of 30 common Salmonella serovars

BackgroundWhile Salmonella serotyping is of paramount importance for the disease intervention of salmonellosis, a fast and easy-to-operate molecular serotyping solution remains elusive. We have developed a multiplex ligation reaction based on probe melting curve analysis (MLMA) for the identification of 30 common Salmonella serovars.MethodsSerovar-specific primers and probes were designed based on a comparison of gene targets (wzx and wzy encoding for somatic antigen biosynthesis; fliC and fljB for flagellar antigens) from 5868 Salmonella genomes. The ssaR gene, a type III secretion system component, was included for the confirmation of Salmonella.ResultsAll gene targets were detected and gave expected Tm values during assay evaluation. Cross reactions were not demonstrated between the 30 serovars (n = 211), or with an additional 120 serovars (n = 120) and other Enterobacteriaceae (n = 3). The limit of identification for all targets ranged from using 1.2 ng/μL to 1.56 ng/μL of DNA. The intra- and inter-assay standard deviations and the coefficients of variation were no more than 0.5 °C and less than 1% respectively, indicating high reproducibility. From consecutive outpatient stool samples (n = 3590) collected over a 10-month period at 11 sentinel hospitals in Shenzhen, China, we conducted a multicenter study using the traditional Salmonella identification workflow and the MLMA assay workflow in parallel. From Salmonella isolates (n = 496, 13.8%) derived by both workflows, total agreement (kappa = 1.0) between the MLMA assay and conventional serotyping was demonstrated.ConclusionsWith an assay time of 2.5 h, this simple assay has shown promising potential to provide rapid and high-throughput identification of Salmonella serovars for clinical and public health laboratories to facilitate timely surveillance of salmonellosis.

Simultaneous Identification of Clinically Common Vibrio parahaemolyticus Serotypes Using Probe Melting Curve Analysis

The dynamic nature of Vibrio parahaemolyticus epidemiology has presented a unique challenge for disease intervention strategies. Despite the continued rise of disease incidence and outbreaks of vibriosis, as well as the global emergence of pandemic clones and serovariants with enhanced virulence, there is a paucity of molecular methods for the serotyping of V. parahaemolyticus strains to improve disease surveillance and outbreak investigations. We describe the development of a multiplex ligation reaction based on probe melting curve analysis (MLMA) for the simultaneous identification of 11 clinically most common V. parahaemolyticus serotypes spanning a 10-year period. Through extensive sequence analyses using 418 genomes, specific primers and probes were designed for a total of 22 antigen gene targets for the O- and K- serogroups. Additionally, the toxR gene was incorporated into the assay for the confirmation of V. parahaemolyticus. All gene targets were detected by the assay and gave expected Tm values, without any cross reactions between the 11 clinically common serotypes or with 38 other serotypes. The limit of identification for all gene targets ranged from 0.1 to 1 ng/μL. The intra- and inter-assay standard deviations and the coefficients of variation were no more than 1°C and <1% respectively, indicating a highly reproducible assay. A multicenter double-blind clinical study was conducted using the traditional V. parahaemolyticus identification workflow and the MLMA assay workflow in parallel. From consecutive diarrheal stool specimens (n = 6118) collected over a year at 10 sentinel hospitals, a total of 153 V. parahaemolyticus isolates (2.5%) were identified by both workflows. A total agreement (kappa = 1.0) between the serotypes identified by the MLMA assay and conventional serological method was demonstrated. This is the first molecular assay to simultaneously identify multiple clinically important V. parahaemolyticus serotypes, which satisfies the acute need for a practical, rapid and robust identification of V. parahaemolyticus serotypes to facilitate the timely detection of vibriosis outbreaks and surveillance.

Evaluation of Real-Time PCR Coupled With Multiplex Probe Melting Curve Analysis for Pathogen Detection in Patients With Suspected Bloodstream Infections.

Background: This study aimed to evaluate real-time polymerase chain reaction coupled with multiplex probe melting curve analysis (PCR-MCA) for pathogen detection in patients with suspected bloodstream infections (BSIs).Methods: A PCR-MCA assay was developed for simultaneous identification of 28 kinds of the most common pathogens and two resistance genes within a few hours. The diagnostic performance of the PCR-MCA assay was determined and compared to the results of blood culture.Results: A total of 2,844 consecutive new episodes of suspected BSIs in 2,763 patients were included in this study. There were 269 episodes of pathogens identified by blood culture. For all the pathogens tested, the PCR-MCA assay exhibited a sensitivity of 88.8% (239/269), specificity of 100% (2,575/2,575), and agreement of 98.9% (2,814/2,844). For the pathogens on the PCR-MCA list, the PCR-MCA results had a sensitivity of 99.2% (239/241), specificity of 100% (2,575/2,575), and agreement of 99.9% (2,814/2,816) compared with the results of blood culture. For seven samples with multiple pathogens identified simultaneously during one blood culture investigation, the PCR-MCA assay verified the results of the blood culture, with an agreement rate of 100% for each.Conclusion: The PCR-MCA assay could discover 88.8% of the pathogens in clinical practice, showing excellent diagnostic performance vs. that of blood culture for pathogen detection in patients with suspected BSIs, and would contribute to rapid diagnosis and correct antibiotic administration.

Association of JAG1 gene polymorphism with systemic blood pressure in patients with obstructive sleep apnea: a prospective cohort study

AimTo assess the effects of single nucleotide polymorphisms (SNPs) on blood pressure control in patients with obstructive sleep apnea (OSA).MethodsThis prospective observational cohort study, conducted between 2004 and 2014, examined the associations of SNPs of JAG1, GUCY1A3-GUCY1B3, SH2B3, and NPR3-C5orf23 genes with systolic and diastolic blood pressure (SBP, DBP) in 1179 adults evaluated for OSA with overnight polysomnography. Genotyping was performed by unlabeled probe melting analysis.ResultsThe patients were predominantly male (69.6%, mean age 52 ± 11 years, apnea-hypopnea index 34 ± 31 episodes/h). Only JAG1 genotype was associated with SBP and DBP: compared with AA homozygotes, G allele carriers (pooled GG and AG genotype) had significantly higher morning SBP (132 ± 19 vs 129 ± 18 mm Hg; P = 0.009) and morning and evening DBP (85 ± 11 vs 83 ± 10 mm Hg, P = 0.004; 86 ± 10 vs 84 ± 10 mm Hg, P = 0.012, respectively); the differences remained significant after the correction for multiple SNPs testing. In multivariate analyses, oxygen desaturation index and JAG1 genotype independently predicted morning SBP (P = 0.001, P = 0.003, respectively) and DBP (P < 0.001, P = 0.005, respectively), and evening SBP (P = 0.019, P = 0.048, respectively) and DBP (P = 0.018, P = 0.018, respectively).ConclusionThis is the first replication study of the SNPs recently linked to arterial hypertension in general population by genome-wide association studies. Our findings suggest that JAG1 genotype is related to blood pressure control in OSA: G allele was associated with higher morning and evening SBP and DBP.

Species identification and quantification of silver pomfret using the droplet digital PCR assay

Adulteration of the high-value silver pomfret (Pampus argenteus) is a serious problem worldwide, necessitating accurate identification and quantification of the species. In this study, optimisation of the digital droplet PCR (ddPCR) assay for the identification and quantification of the silver pomfret was carried out. The primer and probe concentrations, melting temperature, and PCR cycle number were optimised by combining single-factor experiments with an orthogonal experimental design. The absolute limits of detection and quantification of the ddPCR were 2copies/μl and 21 copies/μl, respectively. Its sensitivity was 0.1% for meat mixtures and 0.5% for DNA mixtures. The ddPCR was 156 times more sensitive than the real-time PCR, although both methods had similar specificities. However, the overall time needed to complete the ddPCR method was twice that of the real-time PCR. Notwithstanding, the ddPCR methodology established in this study can be a valuable tool for addressing species adulteration issues.

A Multicolor Fluorescence in situ Hybridization Approach Using an Extended Set of Fluorophores to Visualize Microorganisms.

Fluorescence in situ hybridization (FISH) with rRNA-targeted oligonucleotide probes is a key method for the detection of (uncultured) microorganisms in environmental and medical samples. A major limitation of standard FISH protocols, however, is the small number of phylogenetically distinct target organisms that can be detected simultaneously. In this study, we introduce a multicolor FISH approach that uses eight fluorophores with distinct spectral properties, which can unambiguously be distinguished by confocal laser scanning microscopy combined with white light laser technology. Hybridization of rRNA-targeted DNA oligonucleotide probes, which were mono-labeled with these fluorophores, to Escherichia coli cultures confirmed that the fluorophores did not affect probe melting behavior. Application of the new multicolor FISH method enabled the differentiation of seven (potentially up to eight) phylogenetically distinct microbial populations in an artificial community of mixed pure cultures (five bacteria, one archaeon, and one yeast strain) and in activated sludge from a full-scale wastewater treatment plant. In contrast to previously published multicolor FISH approaches, this method does not rely on combinatorial labeling of the same microorganisms with different fluorophores, which is prone to biases. Furthermore, images acquired by this method do not require elaborate post-processing prior to analysis. We also demonstrate that the newly developed multicolor FISH method is compatible with an improved cell fixation protocol for FISH targeting Gram-negative bacterial populations. This fixation approach uses agarose embedding during formaldehyde fixation to better preserve the three-dimensional structure of spatially complex samples such as biofilms and activated sludge flocs. The new multicolor FISH approach should be highly suitable for studying structural and functional aspects of microbial communities in virtually all types of samples that can be analyzed by conventional FISH methods.

Silicon \xb5PCR Chip for Forensic STR Profiling with Hybeacon Probe Melting Curves

The demand to perform forensic DNA profiling outside of centralized laboratories and on the crime scene is increasing. Several criminal investigations would benefit tremendously from having DNA based information available in the first hours rather than days or weeks. However, due to the complexity and time-consuming nature of standard DNA fingerprinting methods, rapid and automated analyses are hard to achieve. We here demonstrate the implementation of an alternative DNA fingerprinting method in a single microchip. By combining PCR amplification and HyBeacon melting assays in a silicon Lab-on-a-chip (LoC), a significant step towards rapid on-site DNA fingerprinting is taken. The small form factor of a LoC reduces reagent consumption and increases portability. Additional miniaturization is achieved through an integrated heating element covering 24 parallel micro-reactors with a reaction volume of 0.14 µl each. The high level of parallelization allows the simultaneous analysis of 4 short tandem repeat (STR) loci and the amelogenin gender marker commonly included in forensic DNA analysis. A reference and crime scene sample can be analyzed simultaneously for direct comparison. Importantly, by using industry-standard semiconductor manufacturing processes, mass manufacturability can be guaranteed. Following assay design and optimization, complete 5-loci profiles could be robustly generated on-chip that are on par with those obtained using conventional benchtop real-time PCR thermal cyclers. Together, our results are an important step towards the development of commercial, mass-produced, portable devices for on-site testing in forensic DNA analysis.

Detection of IDH1 and IDH2 Mutation in Formalin-fixed Paraffin-embedded Gliomas Using Allele-specific COLD-PCR and Probe Melting Curve Analysis

Many tumors, especially gliomas, contain an isocitrate dehydrogenase (IDH) mutation that can be used for clinical diagnosis and prognosis. Our study aimed to develop a new reliable detection assay for IDH1 and IDH2 mutations for clinical diagnosis based on the allele-specific (AS) coamplification with lower denaturing-polymerase chain reaction (COLD-PCR) and probe melting curve analysis (PMCA). The method includes 3 elements allowing for the sensitive detection of low-abundance mutations: (1) PCR amplification of the target fragments with AS primers; (2) COLD-PCR; and (3) PMCA for differentiating the different mutations after amplification. We conducted a blinded study with 45 paraffin-embedded gliomas specimens and 13 fresh specimens screened for IDH mutations using Sanger sequencing. Concordance between the results of our AS-COLD-PCR/PMCA assay and Sanger sequencing was 100%. Our assay appeared to be superior to direct sequencing with a much higher sensitivity of 0.4% mutations. In summary, our assay is a cost-effective, convenient, and sensitive method for detecting IDH mutations and could be applied in the clinical setting to assess small brain biopsies.

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes.

In situ X-ray-based measurements of the laser powder bed fusion (LPBF) additive manufacturing process produce unique data for model validation and improved process understanding. Synchrotron X-ray imaging and diffraction provide high resolution, bulk sensitive information with sufficient sampling rates to probe melt pool dynamics as well as phase and microstructure evolution. Here, we describe a laboratory-scale LPBF test bed designed to accommodate diffraction and imaging experiments at a synchrotron X-ray source during LPBF operation. We also present experimental results using Ti-6Al-4V, a widely used aerospace alloy, as a model system. Both imaging and diffraction experiments were carried out at the Stanford Synchrotron Radiation Lightsource. Melt pool dynamics were imaged at frame rates up to 4 kHz with a ∼1.1 μm effective pixel size and revealed the formation of keyhole pores along the melt track due to vapor recoil forces. Diffraction experiments at sampling rates of 1 kHz captured phase evolution and lattice contraction during the rapid cooling present in LPBF within a ∼50 × 100 μm area. We also discuss the utility of these measurements for model validation and process improvement.