Optimal Primer Research Articles

Loop-mediated isothermal amplification of economically important Ceratitis species (Diptera: Tephritidae).

Ceratitis is an economically important genus of fruit flies that originated in Africa, has a wide host range, and causes serious economic losses due to its invasive damage. As a result, it is critical to identify them accurately and quickly in the world. Loop-mediated isothermal amplification (LAMP), as one of the representatives of isothermal amplification technology, has been widely used in the rapid nucleic acid detection of human pathogens and has shown its advantages in the identification of insect agricultural pests. In this study, using the mitochondrial cox1 and cob genes as target genes, the rapid molecular identification of the Ceratitis FARQ complex, C. cosyra, and C. capitata was realized based on LAMP. The experimental conditions optimization results showed that F3/B3:FIP/BIP = 1:8 was the optimal primer concentration ratio and 63 °C was the optimal reaction temperature. The sensitivity of the primers obtained in this study can reach up to 0.01 ng/μl DNA. A loop-mediated isothermal amplification identification technology system was established based on rapid, rough DNA extraction and visual detection of Ceratitis economically important fruit flies. The positive reaction system changed from pink to khaki by visual detection. The identification flow can be completed within 1 hour, including sample processing, DNA extraction, and LAMP visual detection.

Qualitative and Quantitative Detection of CRISPR-Associated Cas Gene in Gene-Edited Foods.

Effective regulation of gene-edited products and resolution of public concerns are the prerequisites for the industrialization of gene-edited crops and their derived foods. CRISPR-associated protein, the core element of the CRISPR system, requires to be regulated. Thus, there is an urgent need to establish qualitative and quantitative detection methods for the Cas gene. In the present study, the primers and probes were designed and screened for Cas12a (Cpf1), which is the most commonly used target site in gene editing; we performed PCR system optimization, determined the optimal primer concentration and annealing temperature, and established qualitative PCR and quantitative PCR (qPCR) assays for detecting Cpf1 in gene editing by specificity and sensitivity tests. In specificity testing, qualitative PCR and qPCR methods could 100% detect samples containing Cpf1 DNA, while the detection rate of other samples without Cpf1 was 0%. In the assay sensitivity test, the limit of detection of qualitative PCR was 0.1% (approximately 44 copies), and the limit of detection of the qPCR method was 14 copies. In the stability test, both the qualitative PCR and qPCR methods were repeated 60 times at their corresponding lowest detection limit concentrations, and the results were positive. Thus, the qualitative and quantitative assays for Cpf1 are specific, sensitive, and stable. The method provides technical support for the effective monitoring of gene-edited products and their derived foods in the future.

SARS-CoV-2 and Its Omicron Variants Detection with RT-RPA -CRISPR/Cas13a-Based Method at Room Temperature.

The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has triggered a global health crisis, with genetic mutations and evolution further creating uncertainty about epidemic risk. It is imperative to rapidly determine the nucleic acid sequence of SARS-CoV-2 and its variants to combat the coronavirus pandemic. Our goal was to develop a rapid, room-temperature, point-of-care (POC) detection system to determine the nucleic acid sequences of SARS-CoV-2 isolates, especially omicron variants. Based on the conserved nucleotide sequence of SARS-CoV-2, bioinformatics software was used to analyze, design, and screen optimal enzymatic isothermal amplification primers and efficient CRISPR RNAs (crRNAs) of CRISPR/Cas13a to the target sequences. Reverse transcription-recombinase polymerase amplification (RT-RPA) was used to amplify the virus, and CRISPR/Cas13a-crRNA was used to cleave the SARS-CoV-2 target sequence. The sensitivity of nucleic acid detection was assessed by serial dilution of plasmid templates. All reactions were performed at room temperature. RT-RPA, combined with CRISPR/Cas13a, can detect the SARS-CoV-2 with a minimum content of 102 copies/μL, and can effectively distinguish between the original strain and the Omicron variant with a minimum limit of detection (LOD) of 103 copies/μL. The method developed in this study has potential application in clinical detection of SARS-CoV-2 and its omicron variants.

A tool to automatically design multiplex PCR primer pairs for specific targets using diverse templates

Multiplex PCR is an increasingly popular method for identifying species, investigating environmental diversity, and conducting phylogenetic analysis. The complexity and increasing availability of diverse templates necessitate a highly automated approach to design degenerate primer pairs for specific targets with multiple sequences. Existing tools for degenerate primer design suffer from poor maintenance, semi-automation, low adaptability, and low tolerance for gaps. We developed PMPrimer, a Python-based tool for automated design and evaluation of multiplex PCR primer pairs for specific targets using diverse templates. PMPrimer automatically designs optimal multiplex PCR primer pairs using a statistical-based template filter; performs multiple sequence alignment, conserved region identification, and primer design; and evaluates the primers based on template coverage, taxon specificity, and target specificity. PMPrimer identifies conserved regions using Shannon’s entropy method, tolerates gaps using a haplotype-based method, and evaluates multiplex PCR primer pairs based on template coverage and taxon specificity. We tested PMPrimer using datasets with diverse levels of conservation, sizes, and applications, including tuf genes of Staphylococci, hsp65 genes of Mycobacteriaceae, and 16S ribosomal RNA genes of Archaea. PMPrimer showed outstanding performance compared with existing tools and experimental validated primers. PMPrimer is available as a Python package at https://github.com/AGIScuipeng/PMPrimer.

Rapid Detection of blaKPC in Carbapenem-Resistant Enterobacterales Based on CRISPR/Cas13a

Klebsiella pneumoniae carbapenemase (KPC) is a crucial enzyme that causes carbapenem resistance in Enterobacterales, and infections by these "superbugs" are extremely challenging to treat. Therefore, there is a pressing need for a rapid and accurate KPC detection test to control the prevalence of carbapenem-resistant Enterobacterales (CREs). In this study, we established a novel method for detection of blaKPC, the gene responsible for encoding KPC, based on a recombinase polymerase amplification (RPA) and a CRISPR/Cas13a reaction coupled to fluorophore activation (termed RPA-Cas13a assay). We carefully selected a pair of optimal amplification primers for blaKPC and achieved a lower limit of detection of approximately 2.5 copies/μL by repeatedly amplifying a recombinant plasmid containing blaKPC. The RPA-Cas13a assay demonstrated a sensitivity of 96.5% and specificity of 100% when tested on 57 blaKPC-positive CRE strains, which were confirmed by DNA sequencing. Moreover, in 311 sputum samples, the theoretical antibiotic resistance characteristics of blaKPC-positive strains obtained by the RPA-Cas13a assay were highly consistent with the results of antibiotic susceptibility test (Kappa = 0.978 > 0.81, P < 0.01). In conclusion, the RPA-Cas13a system is a simple and one-hour efficient technology for the detection of a potentially fatal antibiotic resistance gene.

Smart-Plexer: a breakthrough workflow for hybrid development of multiplex PCR assays

Developing multiplex PCR assays requires extensive experimental testing, the number of which exponentially increases by the number of multiplexed targets. Dedicated efforts must be devoted to the design of optimal multiplex assays ensuring specific and sensitive identification of multiple analytes in a single well reaction. Inspired by data-driven approaches, we reinvent the process of developing and designing multiplex assays using a hybrid, simple workflow, named Smart-Plexer, which couples empirical testing of singleplex assays and computer simulation to develop optimised multiplex combinations. The Smart-Plexer analyses kinetic inter-target distances between amplification curves to generate optimal multiplex PCR primer sets for accurate multi-pathogen identification. In this study, the Smart-Plexer method is applied and evaluated for seven respiratory infection target detection using an optimised multiplexed PCR assay. Single-channel multiplex assays, together with the recently published data-driven methodology, Amplification Curve Analysis (ACA), were demonstrated to be capable of classifying the presence of desired targets in a single test for seven common respiratory infection pathogens.

Development of a droplet digital PCR assay for the sensitive detection of iridovirus in Andrias davidianus.

Chinese giant salamander iridovirus (GSIV) is the first known and causative viral pathogen in Andrias davidianus. Developing a sensitive, accurate and specific assay to detect GSIV in samples is essential to prevent the further spread of the pathogen. In this study, we established a droplet digital PCR (ddPCR) assay that targeted the mcp gene of GSIV, enabling rapid and quantitative detection of the virus. We determined that the optimal annealing temperature, primer concentration and probe concentration were 57.1°C, 50 nM and 500 nM, respectively. We analysed the specificity and sensitivity of the ddPCR assay and found that five common aquatic animal viruses, including Cyprinid herpesvirus 2 (CyHV-2), infectious spleen and kidney necrosis virus (ISKNV), Koi herpesvirus (KHV) and Carp Edema Virus (CEV) displayed negative results based on this GSIV ddPCR assay. The assay can detect GSIV with the lowest detection limit of 3.7 copies per reaction. To evaluate the sensitivity and accuracy of the ddPCR assay, we tested different infected tissue samples with both the ddPCR and TaqMan real-time PCR assays. Our results showed that the ddPCR assay detected GSIV in all samples with 100% positivity, while the TaqMan real-time PCR assay detected GSIV in only 82.1% of samples. The established ddPCR method provided several advantages in detecting GISV, including high sensitivity, high precision and absolute quantification, making it a powerful tool for detection of possible and potential GSIV infection, even in samples with low viral load.

DNA-based assessment of root lesion nematode infections in cereal roots

Root lesion nematodes (RLN) of the genus Pratylenchus are causing significant damage in cereal production worldwide. Due to climate change and without efficient and environment-friendly treatments, the damages through RLNs are predicted to increase. Microscopic assessments of RLNs in the field and the greenhouses are time-consuming and laborious. As a result, cereal breeders have mostly ignored this pest. We present a method measuring RLN in infected cereal roots using a standardized PCR approach. Publicly available Pratylenchus neglectus primer combinations were evaluated. An optimal primer combination for RT-qPCR assay was identified to detect and quantify P. neglectus within infected cereal roots. Using the RT-qPCR detection assay, P. neglectus could be clearly distinguished from other plant parasitic nematodes. We could identify P. neglectus DNA in barley and wheat roots as low as 0.863 and 0.916 ng/µl of total DNA, respectively. A single P. neglectus individual was detected in water suspension and within barley and wheat roots. The RT-qPCR detection assay provides a robust and accurate alternative to microscopic nematode identification and quantification. It could be of interest for resistance breeding, where large populations must be screened to detect and quantify P. neglectus in farmer’s fields.

A rapid and visual detection of Staphylococcus haemolyticus in clinical specimens with RPA-LFS

Staphylococcus haemolyticus (S. haemolyticus), which is highly prevent in the hospital environment, is an etiological factor for nosocomial infections. Point-of-care rapid testing (POCT) of S. haemolyticus is not possible with the currently used detection methods. Recombinase polymerase amplification (RPA) is a novel isothermal amplification technology with high sensitivity and specificity. The combination of RPA and lateral flow strips (LFS) can achieve rapid pathogen detection, enabling POCT. This study developed an RPA-LFS methodology using a specific probe/primer pair to identify S. haemolyticus. A basic RPA reaction was performed to screen the specific primer from 6 primer pairs targeting mvaA gene. The optimal primer pair was selected based on agarose gel electrophoresis, and the probe was designed. To eliminate false-positive results caused by the byproducts, base mismatches were introduced in the primer/probe pair. The improved primer/probe pair could specifically identify the target sequence. To explore the optimal reaction conditions, the effects of reaction temperature and duration of the RPA-LFS method were systematically investigated. The improved system enabled optimal amplification at 37 °C for 8 min, and the results were visualized within 1 min. The S. haemolyticus detection sensitivity of the RPA-LFS method, whose performance was unaffected by contamination with other genomes, was 0.147 CFU/reaction. Furthermore, we analyzed 95 random clinical samples with RPA-LFS, quantitative polymerase chain reaction (qPCR), and traditional bacterial-culture assays and found that the RPA-LFS had 100% and 98.73% compliance rates with the qPCR and traditional culture method, respectively, which confirms its clinical applicability. In this study, we designed an improved RPA-LFS assay based on the specific probe/primer pair for the detection of S. haemolyticus via rapid POCT, free from the limitations of the precision instruments, helping to make diagnoses and treatment decisions as soon as possible.

Absolute quantification of viable Vibrio cholerae in seawater samples using multiplex droplet digital PCR combined with propidium monoazide.

Toxigenic Vibrio cholerae serogroup O1 and O139 are the pathogens responsible for the global cholera epidemic. V. cholerae can settle in the water and spread via the fecal-oral route. Rapid and accurate monitoring of live V. cholerae in environmental water has become an important strategy to prevent and control cholera transmission. Conventional plate counting is widely used to detect viable bacteria but requires time and effort. This study aims to develop a new assay that combines triplex droplet digital PCR (ddPCR) with propidium monoazide (PMA) treatment for quantitatively detecting live V. cholerae O1/O139 and cholera enterotoxin. Specific primers and probes were designed according to the conserved regions of gene rfb O1, rfb O139, and ctxA. The amplification procedures and PMA treatment conditions were optimized. The specificity, sensitivity, and ability of PMA-ddPCR to detect viable bacteria-derived DNA were evaluated in simulated seawater samples. The results revealed that the optimal primer concentrations of rfb O1, rfb O139, and ctxA were 1 μM, while the concentrations of the three probes were 0.25, 0.25, and 0.4 μM, respectively. The best annealing temperature was 58°C to obtain the most accurate results. The optimal strategy for distinguishing dead and live bacteria from PMA treatment was incubation at the concentration of 20 μM for 15 min, followed by exposure to a 650-W halogen lamp for 20 min. In pure culture solutions, the limit of detection (LODs) of V. cholerae O1 and O139, and ctxA were 127.91, 120.23 CFU/mL, and 1.5 copies/reaction in PMA-triplex ddPCR, respectively, while the LODs of the three targets were 150.66, 147.57 CFU/mL, and 2 copies/reaction in seawater samples. The PMA-ddPCR sensitivity was about 10 times higher than that of PMA-qPCR. When detecting spiked seawater samples with live bacterial concentrations of 1.53 × 102 and 1.53 × 105 CFU/mL, the assay presented a higher sensitivity (100%, 16/16) than qPCR (50.00%, 8/16) and a perfect specificity (100%, 9/9). These results indicate that the developed PMA-triplex ddPCR is superior to the qPCR regarding sensitivity and specificity and can be used to rapidly detect viable toxigenic V. cholerae O1 and O139 in suspicious seawater samples.

Development and evaluation of a droplet digital PCR assay to detect Brucella in human whole blood.

With the development of domestic animal husbandry, the spread of brucellosis has accelerated, and the scope of the epidemic has expanded. The timely and accurate diagnosis of human brucellosis continues to challenge clinicians in endemic areas. Droplet digital PCR (ddPCR) technology can quickly and accurately determine DNA load in samples, providing laboratory evidence for diagnosis, prognosis and management of brucellosis patients. In this study, a ddPCR method was established to accurately quantify Brucella DNA load in whole blood samples, and its diagnostic, prognostic, and therapeutic value for human brucellosis was evaluated. Annealing temperature, primers, and probe targeting the Brucella bcsp31 gene were optimised, and the sensitivity, specificity and repeatability of the ddPCR assay were assessed using 94 whole blood samples from 61 confirmed and 33 suspected cases. Results were compared with those of quantitative PCR (qPCR). Nine follow-up brucellosis patients were also analysed by the two methods after 2 and 6 months of treatment. Optimal primer and probe concentrations were 800 nmol/L and 400 nmol/L, respectively, and the optimal annealing temperature was 55.3 °C. The ddPCR results showed that the limit of detection was 1.87 copies per reaction, with high repeatability. The positive rates for ddPCR and qPCR were 88.5% and 75.4% among 61 serum agglutination test (SAT) positive patients. In addition, 57.6% (19/33) of suspected sero-negative samples were positive by ddPCR, but only 36.3% (12/33) were positive by qPCR. Analysis of nine post-therapy follow-up brucellosis patients revealed that the Brucella DNA load in the whole blood samples decreased after 2 and 6 months of treatment, and was slightly increased following relapse and continuous exposure. The ddPCR assay showed good accuracy for whole blood samples, and could be a potential diagnostic and prognostic tool for detecting Brucella.

Reducing the inherent auto-inhibitory interaction within the pegRNA enhances prime editing efficiency.

Prime editing systems have enabled the incorporation of precise edits within a genome without introducing double strand breaks. Previous studies defined an optimal primer binding site (PBS) length for the pegRNA of ∼13 nucleotides depending on the sequence composition. However, optimal PBS length characterization has been based on prime editing outcomes using plasmid or lentiviral expression systems. In this study, we demonstrate that for prime editor (PE) ribonucleoprotein complexes, the auto-inhibitory interaction between the PBS and the spacer sequence affects pegRNA binding efficiency and target recognition. Destabilizing this auto-inhibitory interaction by reducing the complementarity between the PBS-spacer region enhances prime editing efficiency in multiple prime editing formats. In the case of end-protected pegRNAs, a shorter PBS length with a PBS-target strand melting temperature near 37°C is optimal in mammalian cells. Additionally, a transient cold shock treatment of the cells post PE-pegRNA delivery further increases prime editing outcomes for pegRNAs with optimized PBS lengths. Finally, we show that prime editor ribonucleoprotein complexes programmed with pegRNAs designed using these refined parameters efficiently correct disease-related genetic mutations in patient-derived fibroblasts and efficiently install precise edits in primary human T cells and zebrafish.

A triple-target reverse transcription loop-mediated isothermal amplification (RT-LAMP) for rapid and accurate detection of SARS-CoV-2 virus

The spreading of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) across the world has impacted people's health and lives worldwide in recent years. Rapid and accurate diagnosis is crucial for curbing the pandemic of coronavirus disease 2019 (COVID-19). Reverse transcription loop-mediated isothermal amplification (RT-LAMP) has great potential for SARS-CoV-2 detection but fails to completely replace conventional PCR due to the high false-positive rate (FPR). We proposed a triple-target RT-LAMP method for dual-signal, sensitive, and simultaneous detection of conserved genes of SARS-CoV-2. Multiple LAMP primer sets were designed for N, E, and M genes and their amplification efficacy were screened. Then, using artificial plasmids and RNA, the optimal primer set for each gene was examined on specificity, sensitivity, and detection range. The RT-LAMP initiated by these primer sets exhibited better specificity and sensitivity than that of RT-qPCR, and the triple-target RT-LAMP could determine different variants of SARS-CoV-2. By testing 78 artificial RNA samples, the total FPR of triple-target RT-LAMP was eliminated compared with that of mono-target RT-LAMP. The triple-target RT-LAMP method precisely identified throat swab specimens through colorimetry and fluorescent signals within 60 min, and the limit of detection (LOD) was as low as 187 copies/reaction. In the future, the triple-target RT-LAMP can be applied to in-field and on-site diagnosis of symptomatic and asymptomatic virus carriers.

RibDif2: expanding amplicon analysis to full genomes.

As previously described, amplicon analysis of the bacterial 16S gene has several limitations owing to fundamental characteristics of both the 16S gene and technological restrictions. Previously, RibDif was introduced to help quantify these limitations by detailed analysis of a given genera and the 16S gene profile of its members, notably multiplicity and divergence of 16S alleles within genomes as well as shared alleles between species. Apart from using amplicon analysis for only the 16S gene, amplicons derived from genus-specific genes or even functional genes are increasingly being utilized. Moreover, long-read technologies are progressively being used to sequence longer amplicons, and since these inherently contain more information, they may likely alleviate the issues proposed in RibDif. Taking these phenomena into account, we here propose RibDif2. RibDif2 retains the 16S-optimized functionality of the original RibDif but can now run any set of primers on any part of the genome in any set of organisms, be it prokaryote, eukaryote, or archaea. We demonstrate this new functionality by showing full species resolution of Pseudoalteromonas using complete rRNA-operon amplicons, as well as selection of optimally discriminatory primers for Staphylococcus and Pseudomonas. Moreover, we show a potential bias toward terrestrial bacteria relative to marine ones for primers amplifying biosynthetic gene clusters and lastly suggest optimal primers to differentiate the members of the insect genus Drosophila. We believe that RibDif2 will facilitate the work of all scientists using amplicon sequencing, especially in the era of long-read sequencing. Ribdif2 is freely available at https://github.com/Rob-murphys/ribdif.

Development and application of a sensitive droplet digital PCR‐based method to detect tilapia parvovirus

Tilapia parvovirus (TiPV) causes severe mortality rates in cultured tilapia, resulting in substantial losses to the fish industry. Droplet digital PCR (ddPCR) is a sensitive, accurate, and absolute quantitation method, plus it does not require a standard curve. Herein we report the development and application of a sensitive ddPCR-based method to rapidly detect and quantify TiPV. Optimal annealing temperature was determined to be 59.3°C, and optimal primer and probe concentrations were 900 nmol/L and 250 nmol/L, respectively. Our ddPCR method was highly specific to TiPV and showed no cross-reactivity with other viruses. Further, the detection limit of ddPCR was 0.07 copies/μl, being lower than that of real-time PCR (qPCR, 4.63 copies/μl). We also investigated the ability of ddPCR to detect TiPV in 50 samples and compared the outcome with qPCR data in terms of sensitivity and accuracy. The results showed that the positive detection rate of ddPCR (32%) was higher than that of qPCR (18%). To conclude, our ddPCR method was effective at detecting TiPV in samples with low viral loads. We believe that its application can facilitate the surveillance of sources and transmission routes of TiPV.

Evaluation Study of xMAP TIER Assay on a Microsphere-Based Platform for Detecting First-Line Anti-Tuberculosis Drug Resistance

Early diagnosis of drug susceptibility for tuberculosis (TB) patients could guide the timely initiation of effective treatment. We evaluated a novel multiplex xMAP TIER (Tuberculosis-Isoniazid-Ethambutol-Rifampicin) assay based on the Luminex xMAP system to detect first-line anti-tuberculous drug resistance. Deoxyribonucleic acid samples from 353 Mycobacterium tuberculosis clinical isolates were amplified by multiplex polymerase chain reaction, followed by hybridization and analysis through the xMAP system. Compared with the broth microdilution method, the sensitivity and specificity of the xMAP TIER assay for detecting resistance was 94.9% (95%CI, 90.0-99.8%) and 98.9% (95%CI, 97.7-100.0%) for rifampicin; 89.1% (95%CI, 83.9-94.3%) and 100.0% (95%CI, 100.0-100.0%) for isoniazid; 82.1% (95% CI, 68.0-96.3%) and 99.7% (95% CI, 99.0-100.0%) for ethambutol. With DNA sequencing as the reference standard, the sensitivity and specificity of xMAP TIER for detecting resistance were 95.0% (95% CI, 90.2-99.8%) and 99.6% (95% CI, 98.9-100.0%) for rifampicin; 96.9% (95% CI, 93.8-99.9%) and 100.0% (95% CI, 100.0-100.0%) for isoniazid; 86.1% (95% CI, 74.8-97.4%) and 100.0% (95% CI, 100.0-100.0%) for ethambutol. The results achieved showed that the xMAP TIER assay had good performance for detecting first-line anti-tuberculosis drug resistance, and it has the potential to diagnose drug-resistant tuberculosis more accurately due to the addition of more optimal design primers and probes on open architecture xMAP system.

ConsensusPrime—A Bioinformatic Pipeline for Ideal Consensus Primer Design

Background: High-quality oligonucleotides for molecular amplification and detection procedures of diverse target sequences depend on sequence homology. Processing input sequences and identifying homogeneous regions in alignments can be carried out by hand only if they are small and contain sequences of high similarity. Finding the best regions for large and inhomogeneous alignments needs to be automated. Results: The ConsensusPrime pipeline was developed to sort out redundant and technical interfering data in multiple sequence alignments and detect the most homologous regions from multiple sequences. It automates the prediction of optimal consensus primers for molecular analytical and sequence-based procedures/assays. Conclusion: ConsensusPrime is a fast and easy-to-use pipeline for predicting optimal consensus primers that is executable on local systems without depending on external resources and web services. An implementation in a Docker image ensures platform-independent executability and installability despite the combination of multiple programs. The source code and installation instructions are publicly available on GitHub.

Rapid and Visual Detection of Type 2 Porcine Reproductive and Respiratory Syndrome Virus by Real-Time Fluorescence-Based Reverse Transcription Recombinase-Aided Amplification.

Porcine reproductive and respiratory syndrome (PRRS) is one of the most important diseases that has brought significant economic losses to the swine industry worldwide. Rapid and accurate PRRS virus (PRRSV) detection is one of the key factors for PRRS prevention and control. This study developed a real-time fluorescence-based reverse transcription recombinase-aided amplification (RF-RT-RAA) method for type 2 PRRSV (PRRSV-2) detection. The RF-RT-RAA assay could be performed at 42 °C for 20 min with the optimal primers and a probe. RF-RT-RAA results could be monitored using real-time fluorescence read-out or visually observed with the naked eye using a portable blue light transilluminator. The method had a strong specificity; no cross-reaction was identified with the detected common swine viruses. Moreover, the technique yielded high sensitivity with the lowest detection limit of 101 copies/μL and exhibited good repeatability and reproductively with the coefficients of variation (CV) less than 10%. Eighty-seven clinical samples were tested using RF-RT-RAA and a commercial PRRSV-2 RT-qPCR detection kit. The coincidence rate was 100% between RF-RT-RAA (real-time fluorescence read-out) and RT-qPCR, and 97.7% between RF-RT-RAA (visually observed) and RT-qPCR. The RF-RT-RAA assay provides a new method for rapid and visual detection of PRRSV-2.

Heat-Treated Meat Origin Tracing and Authenticity through a Practical Multiplex Polymerase Chain Reaction Approach.

Meat adulteration have become a global issue, which has increasingly raised concerns due to not only economic losses and religious issues, but also public safety and its negative effects on human health. Using optimal primers for seven target species, a multiplex PCR method was developed for the molecular authentication of camel, cattle, dog, pig, chicken, sheep and duck in one tube reaction. Species-specific amplification from the premixed total DNA of seven species was corroborated by DNA sequencing. The limit of detection (LOD) is as low as 0.025 ng DNA for the simultaneous identification of seven species in both raw and heat-processed meat or target meat: as little as 0.1% (w/w) of the total meat weight. This method is strongly reproducible even while exposed to intensively heat-processed meat and meat mixtures, which renders it able to trace meat origins in real-world foodstuffs based on the authenticity assessment of commercial meat samples. Therefore, this method is a powerful tool for the inspection of meat adulterants and has broad application prospects.

A New Auto-RPA-Fluorescence Detection Platform for SARS-CoV-2.

The outbreak of COVID-19 caused by SARS-CoV-2 has led to a serious worldwide pandemic. Quantitative reverse transcription-polymerase chain reaction (qRT-PCR)-based methods were recommended for routine detection of SARS-CoV-2 RNA. Because the reaction time and analytical sensitivity of qRT-PCR limits the diagnosis of SARS-CoV-2, development of a quick process of SARS-CoV-2 detection technology with high analytical sensitivity remains urgent. We combined isothermal amplification and fluorescence detection technology to develop a new auto-recombinase polymerase amplification (RPA)-fluorescence platform that could be used in the diagnosis of SARS-CoV-2. By optimization of primers and probes, the RPA platform could detect SARS-CoV-2 nucleotides within 15 min. The limits of detection and specificity of the auto-RPA-fluorescence platform were 5 copies/µL and 100%, respectively. The accuracy of detection of the auto-RPA-fluorescence platform in the 16 positive samples was 100%. The RPA platform is a potential technology for the diagnosis of SARS-CoV-2 infection.